| #ifndef CONFIG_GENERAL_H |
| #define CONFIG_GENERAL_H |
| |
| /** @file |
| * |
| * General configuration |
| * |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); |
| |
| #include <config/defaults.h> |
| |
| /* |
| * Banner timeout configuration |
| * |
| * This controls the timeout for the "Press Ctrl-B for the iPXE |
| * command line" banner displayed when iPXE starts up. The value is |
| * specified in tenths of a second for which the banner should appear. |
| * A value of 0 disables the banner. |
| * |
| * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE" |
| * banner displayed only by ROM builds of iPXE during POST. This |
| * defaults to being twice the length of BANNER_TIMEOUT, to allow for |
| * BIOSes that switch video modes immediately before calling the |
| * initialisation vector, thus rendering the banner almost invisible |
| * to the user. |
| */ |
| #define BANNER_TIMEOUT 20 |
| #define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT ) |
| |
| /* |
| * Network protocols |
| * |
| */ |
| |
| #define NET_PROTO_IPV4 /* IPv4 protocol */ |
| //#define NET_PROTO_IPV6 /* IPv6 protocol */ |
| #undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */ |
| #define NET_PROTO_STP /* Spanning Tree protocol */ |
| #define NET_PROTO_LACP /* Link Aggregation control protocol */ |
| #define NET_PROTO_EAPOL /* EAP over LAN protocol */ |
| //#define NET_PROTO_LLDP /* Link Layer Discovery protocol */ |
| |
| /* |
| * PXE support |
| * |
| */ |
| //#undef PXE_STACK /* PXE stack in iPXE - you want this! */ |
| //#undef PXE_MENU /* PXE menu booting */ |
| |
| /* |
| * Download protocols |
| * |
| */ |
| |
| #define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */ |
| #define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */ |
| #undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */ |
| #undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */ |
| #undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */ |
| #undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */ |
| //#undef DOWNLOAD_PROTO_FILE /* Local filesystem access */ |
| |
| /* |
| * SAN boot protocols |
| * |
| */ |
| |
| //#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */ |
| //#undef SANBOOT_PROTO_AOE /* AoE protocol */ |
| //#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */ |
| //#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */ |
| //#undef SANBOOT_PROTO_HTTP /* HTTP SAN protocol */ |
| |
| /* |
| * HTTP extensions |
| * |
| */ |
| #define HTTP_AUTH_BASIC /* Basic authentication */ |
| #define HTTP_AUTH_DIGEST /* Digest authentication */ |
| //#define HTTP_AUTH_NTLM /* NTLM authentication */ |
| //#define HTTP_ENC_PEERDIST /* PeerDist content encoding */ |
| //#define HTTP_HACK_GCE /* Google Compute Engine hacks */ |
| |
| /* |
| * 802.11 cryptosystems and handshaking protocols |
| * |
| */ |
| #define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */ |
| #define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */ |
| #define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */ |
| |
| /* |
| * 802.1x EAP authentication methods |
| * |
| */ |
| #define EAP_METHOD_MD5 /* MD5-Challenge port authentication */ |
| //#define EAP_METHOD_MSCHAPV2 /* MS-CHAPv2 port authentication */ |
| |
| /* |
| * Name resolution modules |
| * |
| */ |
| |
| #define DNS_RESOLVER /* DNS resolver */ |
| |
| /* |
| * Image types |
| * |
| * Etherboot supports various image formats. Select whichever ones |
| * you want to use. |
| * |
| */ |
| //#define IMAGE_NBI /* NBI image support */ |
| //#define IMAGE_ELF /* ELF image support */ |
| //#define IMAGE_MULTIBOOT /* MultiBoot image support */ |
| //#define IMAGE_PXE /* PXE image support */ |
| //#define IMAGE_SCRIPT /* iPXE script image support */ |
| //#define IMAGE_BZIMAGE /* Linux bzImage image support */ |
| //#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */ |
| //#define IMAGE_EFI /* EFI image support */ |
| //#define IMAGE_SDI /* SDI image support */ |
| //#define IMAGE_PNM /* PNM image support */ |
| #define IMAGE_PNG /* PNG image support */ |
| #define IMAGE_DER /* DER image support */ |
| #define IMAGE_PEM /* PEM image support */ |
| //#define IMAGE_ZLIB /* ZLIB image support */ |
| //#define IMAGE_GZIP /* GZIP image support */ |
| //#define IMAGE_UCODE /* Microcode update image support */ |
| |
| /* |
| * Command-line commands to include |
| * |
| */ |
| #define AUTOBOOT_CMD /* Automatic booting */ |
| #define NVO_CMD /* Non-volatile option storage commands */ |
| #define CONFIG_CMD /* Option configuration console */ |
| #define IFMGMT_CMD /* Interface management commands */ |
| #define IWMGMT_CMD /* Wireless interface management commands */ |
| #define IBMGMT_CMD /* Infiniband management commands */ |
| #define FCMGMT_CMD /* Fibre Channel management commands */ |
| #define ROUTE_CMD /* Routing table management commands */ |
| #define IMAGE_CMD /* Image management commands */ |
| #define DHCP_CMD /* DHCP management commands */ |
| #define SANBOOT_CMD /* SAN boot commands */ |
| #define MENU_CMD /* Menu commands */ |
| #define FORM_CMD /* Form commands */ |
| #define LOGIN_CMD /* Login command */ |
| #define SYNC_CMD /* Sync command */ |
| #define SHELL_CMD /* Shell command */ |
| //#define NSLOOKUP_CMD /* DNS resolving command */ |
| //#define TIME_CMD /* Time commands */ |
| //#define DIGEST_CMD /* Image crypto digest commands */ |
| //#define LOTEST_CMD /* Loopback testing commands */ |
| //#define VLAN_CMD /* VLAN commands */ |
| //#define PXE_CMD /* PXE commands */ |
| //#define REBOOT_CMD /* Reboot command */ |
| //#define POWEROFF_CMD /* Power off command */ |
| //#define IMAGE_TRUST_CMD /* Image trust management commands */ |
| //#define PCI_CMD /* PCI commands */ |
| //#define PARAM_CMD /* Request parameter commands */ |
| //#define NEIGHBOUR_CMD /* Neighbour management commands */ |
| //#define PING_CMD /* Ping command */ |
| //#define CONSOLE_CMD /* Console command */ |
| //#define IPSTAT_CMD /* IP statistics commands */ |
| //#define PROFSTAT_CMD /* Profiling commands */ |
| //#define NTP_CMD /* NTP commands */ |
| //#define CERT_CMD /* Certificate management commands */ |
| //#define IMAGE_MEM_CMD /* Read memory command */ |
| #define IMAGE_ARCHIVE_CMD /* Archive image management commands */ |
| #define SHIM_CMD /* EFI shim command (or dummy command) */ |
| |
| /* |
| * ROM-specific options |
| * |
| */ |
| #undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */ |
| #define AUTOBOOT_ROM_FILTER /* Autoboot only devices matching our ROM */ |
| |
| /* |
| * Virtual network devices |
| * |
| */ |
| #define VNIC_IPOIB /* Infiniband IPoIB virtual NICs */ |
| //#define VNIC_XSIGO /* Infiniband Xsigo virtual NICs */ |
| |
| /* |
| * Error message tables to include |
| * |
| */ |
| #undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */ |
| |
| /* |
| * Obscure configuration options |
| * |
| * You probably don't need to touch these. |
| * |
| */ |
| |
| #undef BUILD_SERIAL /* Include an automatic build serial |
| * number. Add "bs" to the list of |
| * make targets. For example: |
| * "make bin/rtl8139.dsk bs" */ |
| #undef BUILD_ID /* Include a custom build ID string, |
| * e.g "test-foo" */ |
| #undef NULL_TRAP /* Attempt to catch NULL function calls */ |
| #undef GDBSERIAL /* Remote GDB debugging over serial */ |
| #undef GDBUDP /* Remote GDB debugging over UDP |
| * (both may be set) */ |
| //#define EFI_DOWNGRADE_UX /* Downgrade UEFI user experience */ |
| #define TIVOLI_VMM_WORKAROUND /* Work around the Tivoli VMM's garbling of SSE |
| * registers when iPXE traps to it due to |
| * privileged instructions */ |
| |
| #include <config/named.h> |
| #include NAMED_CONFIG(general.h) |
| #include <config/local/general.h> |
| #include LOCAL_NAMED_CONFIG(general.h) |
| |
| #endif /* CONFIG_GENERAL_H */ |
