| /************************************************************************** | |
| ETHERBOOT - BOOTP/TFTP Bootstrap Program | |
| Author: Martin Renters | |
| Date: May/94 | |
| This code is based heavily on David Greenman's if_ed.c driver | |
| Copyright (C) 1993-1994, David Greenman, Martin Renters. | |
| This software may be used, modified, copied, distributed, and sold, in | |
| both source and binary form provided that the above copyright and these | |
| terms are retained. Under no circumstances are the authors responsible for | |
| the proper functioning of this software, nor do the authors assume any | |
| responsibility for damages incurred with its use. | |
| Multicast support added by Timothy Legge (timlegge@users.sourceforge.net) 09/28/2003 | |
| Relocation support added by Ken Yap (ken_yap@users.sourceforge.net) 28/12/02 | |
| 3c503 support added by Bill Paul (wpaul@ctr.columbia.edu) on 11/15/94 | |
| SMC8416 support added by Bill Paul (wpaul@ctr.columbia.edu) on 12/25/94 | |
| 3c503 PIO support added by Jim Hague (jim.hague@acm.org) on 2/17/98 | |
| RX overrun by Klaus Espenlaub (espenlaub@informatik.uni-ulm.de) on 3/10/99 | |
| parts taken from the Linux 8390 driver (by Donald Becker and Paul Gortmaker) | |
| SMC8416 PIO support added by Andrew Bettison (andrewb@zip.com.au) on 4/3/02 | |
| based on the Linux 8390 driver (by Donald Becker and Paul Gortmaker) | |
| **************************************************************************/ | |
| FILE_LICENCE ( BSD2 ); | |
| /* #warning "ns8390.c: FIXME: split ISA and PCI, clean up" */ | |
| #if 1 | |
| #if !defined(INCLUDE_NS8390) && !defined(INCLUDE_WD) && \ | |
| !defined(INCLUDE_NE) && !defined(INCLUDE_3C503) | |
| /* The driver named ns8390 is the PCI driver, often called | |
| "PCI ne2000 clones". */ | |
| # define INCLUDE_NS8390 1 | |
| #endif | |
| #include "etherboot.h" | |
| #include "nic.h" | |
| #include "ns8390.h" | |
| #include <ipxe/ethernet.h> | |
| #ifdef INCLUDE_NS8390 | |
| #include <ipxe/pci.h> | |
| #else | |
| #include <ipxe/isa.h> | |
| #endif | |
| static unsigned char eth_vendor, eth_flags; | |
| #ifdef INCLUDE_WD | |
| static unsigned char eth_laar; | |
| #endif | |
| static unsigned short eth_nic_base, eth_asic_base; | |
| static unsigned char eth_memsize, eth_rx_start, eth_tx_start; | |
| static Address eth_bmem, eth_rmem; | |
| static unsigned char eth_drain_receiver; | |
| #ifdef INCLUDE_WD | |
| static struct wd_board { | |
| const char *name; | |
| char id; | |
| char flags; | |
| char memsize; | |
| } wd_boards[] = { | |
| {"WD8003S", TYPE_WD8003S, 0, MEM_8192}, | |
| {"WD8003E", TYPE_WD8003E, 0, MEM_8192}, | |
| {"WD8013EBT", TYPE_WD8013EBT, FLAG_16BIT, MEM_16384}, | |
| {"WD8003W", TYPE_WD8003W, 0, MEM_8192}, | |
| {"WD8003EB", TYPE_WD8003EB, 0, MEM_8192}, | |
| {"WD8013W", TYPE_WD8013W, FLAG_16BIT, MEM_16384}, | |
| {"WD8003EP/WD8013EP", | |
| TYPE_WD8013EP, 0, MEM_8192}, | |
| {"WD8013WC", TYPE_WD8013WC, FLAG_16BIT, MEM_16384}, | |
| {"WD8013EPC", TYPE_WD8013EPC, FLAG_16BIT, MEM_16384}, | |
| {"SMC8216T", TYPE_SMC8216T, FLAG_16BIT | FLAG_790, MEM_16384}, | |
| {"SMC8216C", TYPE_SMC8216C, FLAG_16BIT | FLAG_790, MEM_16384}, | |
| {"SMC8416T", TYPE_SMC8416T, FLAG_16BIT | FLAG_790, MEM_8192}, | |
| {"SMC8416C/BT", TYPE_SMC8416C, FLAG_16BIT | FLAG_790, MEM_8192}, | |
| {"SMC8013EBP", TYPE_SMC8013EBP,FLAG_16BIT, MEM_16384}, | |
| {NULL, 0, 0, 0} | |
| }; | |
| #endif | |
| #ifdef INCLUDE_3C503 | |
| static unsigned char t503_output; /* AUI or internal xcvr (Thinnet) */ | |
| #endif | |
| #if defined(INCLUDE_WD) | |
| #define ASIC_PIO WD_IAR | |
| #define eth_probe wd_probe | |
| #if defined(INCLUDE_3C503) || defined(INCLUDE_NE) || defined(INCLUDE_NS8390) | |
| Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390 | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_3C503) | |
| #define eth_probe t503_probe | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || defined(INCLUDE_WD) | |
| Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390 | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_NE) | |
| #define eth_probe ne_probe | |
| #if defined(INCLUDE_NS8390) || defined(INCLUDE_3C503) || defined(INCLUDE_WD) | |
| Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390 | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_NS8390) | |
| #define eth_probe nepci_probe | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_3C503) || defined(INCLUDE_WD) | |
| Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390 | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_3C503) | |
| #define ASIC_PIO _3COM_RFMSB | |
| #else | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) | |
| #define ASIC_PIO NE_DATA | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO)) | |
| /************************************************************************** | |
| ETH_PIO_READ - Read a frame via Programmed I/O | |
| **************************************************************************/ | |
| static void eth_pio_read(unsigned int src, unsigned char *dst, unsigned int cnt) | |
| { | |
| #ifdef INCLUDE_WD | |
| outb(src & 0xff, eth_asic_base + WD_GP2); | |
| outb(src >> 8, eth_asic_base + WD_GP2); | |
| #else | |
| outb(D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND); | |
| outb(cnt, eth_nic_base + D8390_P0_RBCR0); | |
| outb(cnt>>8, eth_nic_base + D8390_P0_RBCR1); | |
| outb(src, eth_nic_base + D8390_P0_RSAR0); | |
| outb(src>>8, eth_nic_base + D8390_P0_RSAR1); | |
| outb(D8390_COMMAND_RD0 | | |
| D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND); | |
| #ifdef INCLUDE_3C503 | |
| outb(src & 0xff, eth_asic_base + _3COM_DALSB); | |
| outb(src >> 8, eth_asic_base + _3COM_DAMSB); | |
| outb(t503_output | _3COM_CR_START, eth_asic_base + _3COM_CR); | |
| #endif | |
| #endif | |
| if (eth_flags & FLAG_16BIT) | |
| cnt = (cnt + 1) >> 1; | |
| while(cnt--) { | |
| #ifdef INCLUDE_3C503 | |
| while((inb(eth_asic_base + _3COM_STREG) & _3COM_STREG_DPRDY) == 0) | |
| ; | |
| #endif | |
| if (eth_flags & FLAG_16BIT) { | |
| *((unsigned short *)dst) = inw(eth_asic_base + ASIC_PIO); | |
| dst += 2; | |
| } | |
| else | |
| *(dst++) = inb(eth_asic_base + ASIC_PIO); | |
| } | |
| #ifdef INCLUDE_3C503 | |
| outb(t503_output, eth_asic_base + _3COM_CR); | |
| #endif | |
| } | |
| /************************************************************************** | |
| ETH_PIO_WRITE - Write a frame via Programmed I/O | |
| **************************************************************************/ | |
| static void eth_pio_write(const unsigned char *src, unsigned int dst, unsigned int cnt) | |
| { | |
| #ifdef COMPEX_RL2000_FIX | |
| unsigned int x; | |
| #endif /* COMPEX_RL2000_FIX */ | |
| #ifdef INCLUDE_WD | |
| outb(dst & 0xff, eth_asic_base + WD_GP2); | |
| outb(dst >> 8, eth_asic_base + WD_GP2); | |
| #else | |
| outb(D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND); | |
| outb(D8390_ISR_RDC, eth_nic_base + D8390_P0_ISR); | |
| outb(cnt, eth_nic_base + D8390_P0_RBCR0); | |
| outb(cnt>>8, eth_nic_base + D8390_P0_RBCR1); | |
| outb(dst, eth_nic_base + D8390_P0_RSAR0); | |
| outb(dst>>8, eth_nic_base + D8390_P0_RSAR1); | |
| outb(D8390_COMMAND_RD1 | | |
| D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND); | |
| #ifdef INCLUDE_3C503 | |
| outb(dst & 0xff, eth_asic_base + _3COM_DALSB); | |
| outb(dst >> 8, eth_asic_base + _3COM_DAMSB); | |
| outb(t503_output | _3COM_CR_DDIR | _3COM_CR_START, eth_asic_base + _3COM_CR); | |
| #endif | |
| #endif | |
| if (eth_flags & FLAG_16BIT) | |
| cnt = (cnt + 1) >> 1; | |
| while(cnt--) | |
| { | |
| #ifdef INCLUDE_3C503 | |
| while((inb(eth_asic_base + _3COM_STREG) & _3COM_STREG_DPRDY) == 0) | |
| ; | |
| #endif | |
| if (eth_flags & FLAG_16BIT) { | |
| outw(*((unsigned short *)src), eth_asic_base + ASIC_PIO); | |
| src += 2; | |
| } | |
| else | |
| outb(*(src++), eth_asic_base + ASIC_PIO); | |
| } | |
| #ifdef INCLUDE_3C503 | |
| outb(t503_output, eth_asic_base + _3COM_CR); | |
| #else | |
| #ifdef COMPEX_RL2000_FIX | |
| for (x = 0; | |
| x < COMPEX_RL2000_TRIES && | |
| (inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC) | |
| != D8390_ISR_RDC; | |
| ++x); | |
| if (x >= COMPEX_RL2000_TRIES) | |
| printf("Warning: Compex RL2000 aborted wait!\n"); | |
| #endif /* COMPEX_RL2000_FIX */ | |
| #ifndef INCLUDE_WD | |
| while((inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC) | |
| != D8390_ISR_RDC); | |
| #endif | |
| #endif | |
| } | |
| #else | |
| /************************************************************************** | |
| ETH_PIO_READ - Dummy routine when NE2000 not compiled in | |
| **************************************************************************/ | |
| static void eth_pio_read(unsigned int src __unused, unsigned char *dst __unused, unsigned int cnt __unused) {} | |
| #endif | |
| /************************************************************************** | |
| enable_multycast - Enable Multicast | |
| **************************************************************************/ | |
| static void enable_multicast(unsigned short eth_nic_base) | |
| { | |
| unsigned char mcfilter[8]; | |
| int i; | |
| memset(mcfilter, 0xFF, 8); | |
| outb(4, eth_nic_base+D8390_P0_RCR); | |
| outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS1, eth_nic_base + D8390_P0_COMMAND); | |
| for(i=0;i<8;i++) | |
| { | |
| outb(mcfilter[i], eth_nic_base + 8 + i); | |
| if(inb(eth_nic_base + 8 + i)!=mcfilter[i]) | |
| printf("Error SMC 83C690 Multicast filter read/write mishap %d\n",i); | |
| } | |
| outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS0, eth_nic_base + D8390_P0_COMMAND); | |
| outb(4 | 0x08, eth_nic_base+D8390_P0_RCR); | |
| } | |
| /************************************************************************** | |
| NS8390_RESET - Reset adapter | |
| **************************************************************************/ | |
| static void ns8390_reset(struct nic *nic) | |
| { | |
| int i; | |
| eth_drain_receiver = 0; | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| if (eth_flags & FLAG_16BIT) | |
| outb(0x49, eth_nic_base+D8390_P0_DCR); | |
| else | |
| outb(0x48, eth_nic_base+D8390_P0_DCR); | |
| outb(0, eth_nic_base+D8390_P0_RBCR0); | |
| outb(0, eth_nic_base+D8390_P0_RBCR1); | |
| outb(0x20, eth_nic_base+D8390_P0_RCR); /* monitor mode */ | |
| outb(2, eth_nic_base+D8390_P0_TCR); | |
| outb(eth_tx_start, eth_nic_base+D8390_P0_TPSR); | |
| outb(eth_rx_start, eth_nic_base+D8390_P0_PSTART); | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) { | |
| #ifdef WD_790_PIO | |
| outb(0x10, eth_asic_base + 0x06); /* disable interrupts, enable PIO */ | |
| outb(0x01, eth_nic_base + 0x09); /* enable ring read auto-wrap */ | |
| #else | |
| outb(0, eth_nic_base + 0x09); | |
| #endif | |
| } | |
| #endif | |
| outb(eth_memsize, eth_nic_base+D8390_P0_PSTOP); | |
| outb(eth_memsize - 1, eth_nic_base+D8390_P0_BOUND); | |
| outb(0xFF, eth_nic_base+D8390_P0_ISR); | |
| outb(0, eth_nic_base+D8390_P0_IMR); | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS1 | | |
| D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS1 | | |
| D8390_COMMAND_RD2 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| for (i=0; i<ETH_ALEN; i++) | |
| outb(nic->node_addr[i], eth_nic_base+D8390_P1_PAR0+i); | |
| for (i=0; i<ETH_ALEN; i++) | |
| outb(0xFF, eth_nic_base+D8390_P1_MAR0+i); | |
| outb(eth_rx_start, eth_nic_base+D8390_P1_CURR); | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| outb(0xFF, eth_nic_base+D8390_P0_ISR); | |
| outb(0, eth_nic_base+D8390_P0_TCR); /* transmitter on */ | |
| outb(4, eth_nic_base+D8390_P0_RCR); /* allow rx broadcast frames */ | |
| enable_multicast(eth_nic_base); | |
| #ifdef INCLUDE_3C503 | |
| /* | |
| * No way to tell whether or not we're supposed to use | |
| * the 3Com's transceiver unless the user tells us. | |
| * 'flags' should have some compile time default value | |
| * which can be changed from the command menu. | |
| */ | |
| t503_output = (nic->flags) ? 0 : _3COM_CR_XSEL; | |
| outb(t503_output, eth_asic_base + _3COM_CR); | |
| #endif | |
| } | |
| static int ns8390_poll(struct nic *nic, int retrieve); | |
| #ifndef INCLUDE_3C503 | |
| /************************************************************************** | |
| ETH_RX_OVERRUN - Bring adapter back to work after an RX overrun | |
| **************************************************************************/ | |
| static void eth_rx_overrun(struct nic *nic) | |
| { | |
| int start_time; | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND); | |
| /* wait for at least 1.6ms - we wait one timer tick */ | |
| start_time = currticks(); | |
| while (currticks() - start_time <= 1) | |
| /* Nothing */; | |
| outb(0, eth_nic_base+D8390_P0_RBCR0); /* reset byte counter */ | |
| outb(0, eth_nic_base+D8390_P0_RBCR1); | |
| /* | |
| * Linux driver checks for interrupted TX here. This is not necessary, | |
| * because the transmit routine waits until the frame is sent. | |
| */ | |
| /* enter loopback mode and restart NIC */ | |
| outb(2, eth_nic_base+D8390_P0_TCR); | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| /* clear the RX ring, acknowledge overrun interrupt */ | |
| eth_drain_receiver = 1; | |
| while (ns8390_poll(nic, 1)) | |
| /* Nothing */; | |
| eth_drain_receiver = 0; | |
| outb(D8390_ISR_OVW, eth_nic_base+D8390_P0_ISR); | |
| /* leave loopback mode - no packets to be resent (see Linux driver) */ | |
| outb(0, eth_nic_base+D8390_P0_TCR); | |
| } | |
| #endif /* INCLUDE_3C503 */ | |
| /************************************************************************** | |
| NS8390_TRANSMIT - Transmit a frame | |
| **************************************************************************/ | |
| static void ns8390_transmit( | |
| struct nic *nic, | |
| const char *d, /* Destination */ | |
| unsigned int t, /* Type */ | |
| unsigned int s, /* size */ | |
| const char *p) /* Packet */ | |
| { | |
| #if defined(INCLUDE_3C503) || (defined(INCLUDE_WD) && ! defined(WD_790_PIO)) | |
| Address eth_vmem = bus_to_virt(eth_bmem); | |
| #endif | |
| #ifdef INCLUDE_3C503 | |
| if (!(eth_flags & FLAG_PIO)) { | |
| memcpy((char *)eth_vmem, d, ETH_ALEN); /* dst */ | |
| memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */ | |
| *((char *)eth_vmem+12) = t>>8; /* type */ | |
| *((char *)eth_vmem+13) = t; | |
| memcpy((char *)eth_vmem+ETH_HLEN, p, s); | |
| s += ETH_HLEN; | |
| while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0; | |
| } | |
| #endif | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_16BIT) { | |
| outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR); | |
| inb(0x84); | |
| } | |
| #ifndef WD_790_PIO | |
| /* Memory interface */ | |
| if (eth_flags & FLAG_790) { | |
| outb(WD_MSR_MENB, eth_asic_base + WD_MSR); | |
| inb(0x84); | |
| } | |
| inb(0x84); | |
| memcpy((char *)eth_vmem, d, ETH_ALEN); /* dst */ | |
| memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */ | |
| *((char *)eth_vmem+12) = t>>8; /* type */ | |
| *((char *)eth_vmem+13) = t; | |
| memcpy((char *)eth_vmem+ETH_HLEN, p, s); | |
| s += ETH_HLEN; | |
| while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0; | |
| if (eth_flags & FLAG_790) { | |
| outb(0, eth_asic_base + WD_MSR); | |
| inb(0x84); | |
| } | |
| #else | |
| inb(0x84); | |
| #endif | |
| #endif | |
| #if defined(INCLUDE_3C503) | |
| if (eth_flags & FLAG_PIO) | |
| #endif | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO)) | |
| { | |
| /* Programmed I/O */ | |
| unsigned short type; | |
| type = (t >> 8) | (t << 8); | |
| eth_pio_write( (unsigned char *) d, eth_tx_start<<8, ETH_ALEN); | |
| eth_pio_write(nic->node_addr, (eth_tx_start<<8)+ETH_ALEN, ETH_ALEN); | |
| /* bcc generates worse code without (const+const) below */ | |
| eth_pio_write((unsigned char *)&type, (eth_tx_start<<8)+(ETH_ALEN+ETH_ALEN), 2); | |
| eth_pio_write( (unsigned char *) p, (eth_tx_start<<8)+ETH_HLEN, s); | |
| s += ETH_HLEN; | |
| if (s < ETH_ZLEN) s = ETH_ZLEN; | |
| } | |
| #endif | |
| #if defined(INCLUDE_3C503) | |
| #endif | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_16BIT) { | |
| outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR); | |
| inb(0x84); | |
| } | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| outb(eth_tx_start, eth_nic_base+D8390_P0_TPSR); | |
| outb(s, eth_nic_base+D8390_P0_TBCR0); | |
| outb(s>>8, eth_nic_base+D8390_P0_TBCR1); | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_790) | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_TXP | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| else | |
| #endif | |
| outb(D8390_COMMAND_PS0 | | |
| D8390_COMMAND_TXP | D8390_COMMAND_RD2 | | |
| D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND); | |
| } | |
| /************************************************************************** | |
| NS8390_POLL - Wait for a frame | |
| **************************************************************************/ | |
| static int ns8390_poll(struct nic *nic, int retrieve) | |
| { | |
| int ret = 0; | |
| unsigned char rstat, curr, next; | |
| unsigned short len, frag; | |
| unsigned short pktoff; | |
| unsigned char *p; | |
| struct ringbuffer pkthdr; | |
| #ifndef INCLUDE_3C503 | |
| /* avoid infinite recursion: see eth_rx_overrun() */ | |
| if (!eth_drain_receiver && (inb(eth_nic_base+D8390_P0_ISR) & D8390_ISR_OVW)) { | |
| eth_rx_overrun(nic); | |
| return(0); | |
| } | |
| #endif /* INCLUDE_3C503 */ | |
| rstat = inb(eth_nic_base+D8390_P0_RSR); | |
| if (!(rstat & D8390_RSTAT_PRX)) return(0); | |
| next = inb(eth_nic_base+D8390_P0_BOUND)+1; | |
| if (next >= eth_memsize) next = eth_rx_start; | |
| outb(D8390_COMMAND_PS1, eth_nic_base+D8390_P0_COMMAND); | |
| curr = inb(eth_nic_base+D8390_P1_CURR); | |
| outb(D8390_COMMAND_PS0, eth_nic_base+D8390_P0_COMMAND); | |
| if (curr >= eth_memsize) curr=eth_rx_start; | |
| if (curr == next) return(0); | |
| if ( ! retrieve ) return 1; | |
| #ifdef INCLUDE_WD | |
| if (eth_flags & FLAG_16BIT) { | |
| outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR); | |
| inb(0x84); | |
| } | |
| #ifndef WD_790_PIO | |
| if (eth_flags & FLAG_790) { | |
| outb(WD_MSR_MENB, eth_asic_base + WD_MSR); | |
| inb(0x84); | |
| } | |
| #endif | |
| inb(0x84); | |
| #endif | |
| pktoff = next << 8; | |
| if (eth_flags & FLAG_PIO) | |
| eth_pio_read(pktoff, (unsigned char *)&pkthdr, 4); | |
| else | |
| memcpy(&pkthdr, bus_to_virt(eth_rmem + pktoff), 4); | |
| pktoff += sizeof(pkthdr); | |
| /* incoming length includes FCS so must sub 4 */ | |
| len = pkthdr.len - 4; | |
| if ((pkthdr.status & D8390_RSTAT_PRX) == 0 || len < ETH_ZLEN | |
| || len > ETH_FRAME_LEN) { | |
| printf("Bogus packet, ignoring\n"); | |
| return (0); | |
| } | |
| else { | |
| p = nic->packet; | |
| nic->packetlen = len; /* available to caller */ | |
| frag = (eth_memsize << 8) - pktoff; | |
| if (len > frag) { /* We have a wrap-around */ | |
| /* read first part */ | |
| if (eth_flags & FLAG_PIO) | |
| eth_pio_read(pktoff, p, frag); | |
| else | |
| memcpy(p, bus_to_virt(eth_rmem + pktoff), frag); | |
| pktoff = eth_rx_start << 8; | |
| p += frag; | |
| len -= frag; | |
| } | |
| /* read second part */ | |
| if (eth_flags & FLAG_PIO) | |
| eth_pio_read(pktoff, p, len); | |
| else | |
| memcpy(p, bus_to_virt(eth_rmem + pktoff), len); | |
| ret = 1; | |
| } | |
| #ifdef INCLUDE_WD | |
| #ifndef WD_790_PIO | |
| if (eth_flags & FLAG_790) { | |
| outb(0, eth_asic_base + WD_MSR); | |
| inb(0x84); | |
| } | |
| #endif | |
| if (eth_flags & FLAG_16BIT) { | |
| outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR); | |
| inb(0x84); | |
| } | |
| inb(0x84); | |
| #endif | |
| next = pkthdr.next; /* frame number of next packet */ | |
| if (next == eth_rx_start) | |
| next = eth_memsize; | |
| outb(next-1, eth_nic_base+D8390_P0_BOUND); | |
| return(ret); | |
| } | |
| /************************************************************************** | |
| NS8390_DISABLE - Turn off adapter | |
| **************************************************************************/ | |
| static void ns8390_disable ( struct nic *nic, void *hwdev __unused ) { | |
| ns8390_reset(nic); | |
| } | |
| /************************************************************************** | |
| NS8390_IRQ - Enable, Disable, or Force interrupts | |
| **************************************************************************/ | |
| static void ns8390_irq(struct nic *nic __unused, irq_action_t action __unused) | |
| { | |
| switch ( action ) { | |
| case DISABLE : | |
| break; | |
| case ENABLE : | |
| break; | |
| case FORCE : | |
| break; | |
| } | |
| } | |
| static struct nic_operations ns8390_operations; | |
| static struct nic_operations ns8390_operations = { | |
| .connect = dummy_connect, | |
| .poll = ns8390_poll, | |
| .transmit = ns8390_transmit, | |
| .irq = ns8390_irq, | |
| }; | |
| /************************************************************************** | |
| ETH_PROBE - Look for an adapter | |
| **************************************************************************/ | |
| #ifdef INCLUDE_NS8390 | |
| static int eth_probe (struct nic *nic, struct pci_device *pci) | |
| #else | |
| static int eth_probe (struct dev *dev, unsigned short *probe_addrs __unused) | |
| #endif | |
| { | |
| int i; | |
| #ifdef INCLUDE_NS8390 | |
| unsigned short pci_probe_addrs[] = { pci->ioaddr, 0 }; | |
| unsigned short *probe_addrs = pci_probe_addrs; | |
| #endif | |
| eth_vendor = VENDOR_NONE; | |
| eth_drain_receiver = 0; | |
| nic->irqno = 0; | |
| #ifdef INCLUDE_WD | |
| { | |
| /****************************************************************** | |
| Search for WD/SMC cards | |
| ******************************************************************/ | |
| struct wd_board *brd; | |
| unsigned short chksum; | |
| unsigned char c; | |
| for (eth_asic_base = WD_LOW_BASE; eth_asic_base <= WD_HIGH_BASE; | |
| eth_asic_base += 0x20) { | |
| chksum = 0; | |
| for (i=8; i<16; i++) | |
| chksum += inb(eth_asic_base+i); | |
| /* Extra checks to avoid soundcard */ | |
| if ((chksum & 0xFF) == 0xFF && | |
| inb(eth_asic_base+8) != 0xFF && | |
| inb(eth_asic_base+9) != 0xFF) | |
| break; | |
| } | |
| if (eth_asic_base > WD_HIGH_BASE) | |
| return (0); | |
| /* We've found a board */ | |
| eth_vendor = VENDOR_WD; | |
| eth_nic_base = eth_asic_base + WD_NIC_ADDR; | |
| nic->ioaddr = eth_nic_base; | |
| c = inb(eth_asic_base+WD_BID); /* Get board id */ | |
| for (brd = wd_boards; brd->name; brd++) | |
| if (brd->id == c) break; | |
| if (!brd->name) { | |
| printf("Unknown WD/SMC NIC type %hhX\n", c); | |
| return (0); /* Unknown type */ | |
| } | |
| eth_flags = brd->flags; | |
| eth_memsize = brd->memsize; | |
| eth_tx_start = 0; | |
| eth_rx_start = D8390_TXBUF_SIZE; | |
| if ((c == TYPE_WD8013EP) && | |
| (inb(eth_asic_base + WD_ICR) & WD_ICR_16BIT)) { | |
| eth_flags = FLAG_16BIT; | |
| eth_memsize = MEM_16384; | |
| } | |
| if ((c & WD_SOFTCONFIG) && (!(eth_flags & FLAG_790))) { | |
| eth_bmem = (0x80000 | | |
| ((inb(eth_asic_base + WD_MSR) & 0x3F) << 13)); | |
| } else | |
| eth_bmem = WD_DEFAULT_MEM; | |
| if (brd->id == TYPE_SMC8216T || brd->id == TYPE_SMC8216C) { | |
| /* from Linux driver, 8416BT detects as 8216 sometimes */ | |
| unsigned int addr = inb(eth_asic_base + 0xb); | |
| if (((addr >> 4) & 3) == 0) { | |
| brd += 2; | |
| eth_memsize = brd->memsize; | |
| } | |
| } | |
| outb(0x80, eth_asic_base + WD_MSR); /* Reset */ | |
| for (i=0; i<ETH_ALEN; i++) { | |
| nic->node_addr[i] = inb(i+eth_asic_base+WD_LAR); | |
| } | |
| DBG ( "\n%s base %4.4x", brd->name, eth_asic_base ); | |
| if (eth_flags & FLAG_790) { | |
| #ifdef WD_790_PIO | |
| DBG ( ", PIO mode, addr %s\n", eth_ntoa ( nic->node_addr ) ); | |
| eth_bmem = 0; | |
| eth_flags |= FLAG_PIO; /* force PIO mode */ | |
| outb(0, eth_asic_base+WD_MSR); | |
| #else | |
| DBG ( ", Memory %x, MAC Addr %s\n", eth_bmem, eth_ntoa ( nic->node_addr) ); | |
| outb(WD_MSR_MENB, eth_asic_base+WD_MSR); | |
| outb((inb(eth_asic_base+0x04) | | |
| 0x80), eth_asic_base+0x04); | |
| outb(((unsigned)(eth_bmem >> 13) & 0x0F) | | |
| ((unsigned)(eth_bmem >> 11) & 0x40) | | |
| (inb(eth_asic_base+0x0B) & 0xB0), eth_asic_base+0x0B); | |
| outb((inb(eth_asic_base+0x04) & | |
| ~0x80), eth_asic_base+0x04); | |
| #endif | |
| } else { | |
| DBG (", Memory %x, MAC Addr %s\n", eth_bmem, eth_ntoa ( nic->node_addr) ); | |
| outb(((unsigned)(eth_bmem >> 13) & 0x3F) | 0x40, eth_asic_base+WD_MSR); | |
| } | |
| if (eth_flags & FLAG_16BIT) { | |
| if (eth_flags & FLAG_790) { | |
| eth_laar = inb(eth_asic_base + WD_LAAR); | |
| outb(WD_LAAR_M16EN, eth_asic_base + WD_LAAR); | |
| } else { | |
| outb((eth_laar = | |
| WD_LAAR_L16EN | 1), eth_asic_base + WD_LAAR); | |
| /* | |
| The previous line used to be | |
| WD_LAAR_M16EN | WD_LAAR_L16EN | 1)); | |
| jluke@deakin.edu.au reported that removing WD_LAAR_M16EN made | |
| it work for WD8013s. This seems to work for my 8013 boards. I | |
| don't know what is really happening. I wish I had data sheets | |
| or more time to decode the Linux driver. - Ken | |
| */ | |
| } | |
| inb(0x84); | |
| } | |
| } | |
| #endif | |
| #ifdef INCLUDE_3C503 | |
| #ifdef T503_AUI | |
| nic->flags = 1; /* aui */ | |
| #else | |
| nic->flags = 0; /* no aui */ | |
| #endif | |
| /****************************************************************** | |
| Search for 3Com 3c503 if no WD/SMC cards | |
| ******************************************************************/ | |
| if (eth_vendor == VENDOR_NONE) { | |
| int idx; | |
| int iobase_reg, membase_reg; | |
| static unsigned short base[] = { | |
| 0x300, 0x310, 0x330, 0x350, | |
| 0x250, 0x280, 0x2A0, 0x2E0, 0 }; | |
| /* Loop through possible addresses checking each one */ | |
| for (idx = 0; (eth_nic_base = base[idx]) != 0; ++idx) { | |
| eth_asic_base = eth_nic_base + _3COM_ASIC_OFFSET; | |
| /* | |
| * Note that we use the same settings for both 8 and 16 bit cards: | |
| * both have an 8K bank of memory at page 1 while only the 16 bit | |
| * cards have a bank at page 0. | |
| */ | |
| eth_memsize = MEM_16384; | |
| eth_tx_start = 32; | |
| eth_rx_start = 32 + D8390_TXBUF_SIZE; | |
| /* Check our base address. iobase and membase should */ | |
| /* both have a maximum of 1 bit set or be 0. */ | |
| iobase_reg = inb(eth_asic_base + _3COM_BCFR); | |
| membase_reg = inb(eth_asic_base + _3COM_PCFR); | |
| if ((iobase_reg & (iobase_reg - 1)) || | |
| (membase_reg & (membase_reg - 1))) | |
| continue; /* nope */ | |
| /* Now get the shared memory address */ | |
| eth_flags = 0; | |
| switch (membase_reg) { | |
| case _3COM_PCFR_DC000: | |
| eth_bmem = 0xdc000; | |
| break; | |
| case _3COM_PCFR_D8000: | |
| eth_bmem = 0xd8000; | |
| break; | |
| case _3COM_PCFR_CC000: | |
| eth_bmem = 0xcc000; | |
| break; | |
| case _3COM_PCFR_C8000: | |
| eth_bmem = 0xc8000; | |
| break; | |
| case _3COM_PCFR_PIO: | |
| eth_flags |= FLAG_PIO; | |
| eth_bmem = 0; | |
| break; | |
| default: | |
| continue; /* nope */ | |
| } | |
| break; | |
| } | |
| if (base[idx] == 0) /* not found */ | |
| return (0); | |
| #ifndef T503_SHMEM | |
| eth_flags |= FLAG_PIO; /* force PIO mode */ | |
| eth_bmem = 0; | |
| #endif | |
| eth_vendor = VENDOR_3COM; | |
| /* Need this to make ns8390_poll() happy. */ | |
| eth_rmem = eth_bmem - 0x2000; | |
| /* Reset NIC and ASIC */ | |
| outb(_3COM_CR_RST | _3COM_CR_XSEL, eth_asic_base + _3COM_CR ); | |
| outb(_3COM_CR_XSEL, eth_asic_base + _3COM_CR ); | |
| /* Get our ethernet address */ | |
| outb(_3COM_CR_EALO | _3COM_CR_XSEL, eth_asic_base + _3COM_CR); | |
| nic->ioaddr = eth_nic_base; | |
| DBG ( "\n3Com 3c503 base %4.4x, ", eth_nic_base ); | |
| if (eth_flags & FLAG_PIO) | |
| DBG ( "PIO mode" ); | |
| else | |
| DBG ( "memory %4.4x", eth_bmem ); | |
| for (i=0; i<ETH_ALEN; i++) { | |
| nic->node_addr[i] = inb(eth_nic_base+i); | |
| } | |
| DBG ( ", %s, MAC Addr %s\n", nic->flags ? "AUI" : "internal xcvr", | |
| eth_ntoa ( nic->node_addr ) ); | |
| outb(_3COM_CR_XSEL, eth_asic_base + _3COM_CR); | |
| /* | |
| * Initialize GA configuration register. Set bank and enable shared | |
| * mem. We always use bank 1. Disable interrupts. | |
| */ | |
| outb(_3COM_GACFR_RSEL | | |
| _3COM_GACFR_MBS0 | _3COM_GACFR_TCM | _3COM_GACFR_NIM, eth_asic_base + _3COM_GACFR); | |
| outb(0xff, eth_asic_base + _3COM_VPTR2); | |
| outb(0xff, eth_asic_base + _3COM_VPTR1); | |
| outb(0x00, eth_asic_base + _3COM_VPTR0); | |
| /* | |
| * Clear memory and verify that it worked (we use only 8K) | |
| */ | |
| if (!(eth_flags & FLAG_PIO)) { | |
| memset(bus_to_virt(eth_bmem), 0, 0x2000); | |
| for(i = 0; i < 0x2000; ++i) | |
| if (*((char *)(bus_to_virt(eth_bmem+i)))) { | |
| printf ("Failed to clear 3c503 shared mem.\n"); | |
| return (0); | |
| } | |
| } | |
| /* | |
| * Initialize GA page/start/stop registers. | |
| */ | |
| outb(eth_tx_start, eth_asic_base + _3COM_PSTR); | |
| outb(eth_memsize, eth_asic_base + _3COM_PSPR); | |
| } | |
| #endif | |
| #if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) | |
| { | |
| /****************************************************************** | |
| Search for NE1000/2000 if no WD/SMC or 3com cards | |
| ******************************************************************/ | |
| unsigned char c; | |
| if (eth_vendor == VENDOR_NONE) { | |
| unsigned char romdata[16]; | |
| unsigned char testbuf[32]; | |
| int idx; | |
| static unsigned char test[] = "NE*000 memory"; | |
| static unsigned short base[] = { | |
| #ifdef NE_SCAN | |
| NE_SCAN, | |
| #endif | |
| 0 }; | |
| /* if no addresses supplied, fall back on defaults */ | |
| if (probe_addrs == NULL || probe_addrs[0] == 0) | |
| probe_addrs = base; | |
| eth_bmem = 0; /* No shared memory */ | |
| for (idx = 0; (eth_nic_base = probe_addrs[idx]) != 0; ++idx) { | |
| eth_flags = FLAG_PIO; | |
| eth_asic_base = eth_nic_base + NE_ASIC_OFFSET; | |
| eth_memsize = MEM_16384; | |
| eth_tx_start = 32; | |
| eth_rx_start = 32 + D8390_TXBUF_SIZE; | |
| c = inb(eth_asic_base + NE_RESET); | |
| outb(c, eth_asic_base + NE_RESET); | |
| (void) inb(0x84); | |
| outb(D8390_COMMAND_STP | | |
| D8390_COMMAND_RD2, eth_nic_base + D8390_P0_COMMAND); | |
| outb(D8390_RCR_MON, eth_nic_base + D8390_P0_RCR); | |
| outb(D8390_DCR_FT1 | D8390_DCR_LS, eth_nic_base + D8390_P0_DCR); | |
| outb(MEM_8192, eth_nic_base + D8390_P0_PSTART); | |
| outb(MEM_16384, eth_nic_base + D8390_P0_PSTOP); | |
| #ifdef NS8390_FORCE_16BIT | |
| eth_flags |= FLAG_16BIT; /* force 16-bit mode */ | |
| #endif | |
| eth_pio_write( (unsigned char *) test, 8192, sizeof(test)); | |
| eth_pio_read(8192, testbuf, sizeof(test)); | |
| if (!memcmp(test, testbuf, sizeof(test))) | |
| break; | |
| eth_flags |= FLAG_16BIT; | |
| eth_memsize = MEM_32768; | |
| eth_tx_start = 64; | |
| eth_rx_start = 64 + D8390_TXBUF_SIZE; | |
| outb(D8390_DCR_WTS | | |
| D8390_DCR_FT1 | D8390_DCR_LS, eth_nic_base + D8390_P0_DCR); | |
| outb(MEM_16384, eth_nic_base + D8390_P0_PSTART); | |
| outb(MEM_32768, eth_nic_base + D8390_P0_PSTOP); | |
| eth_pio_write( (unsigned char *) test, 16384, sizeof(test)); | |
| eth_pio_read(16384, testbuf, sizeof(test)); | |
| if (!memcmp(testbuf, test, sizeof(test))) | |
| break; | |
| } | |
| if (eth_nic_base == 0) | |
| return (0); | |
| if (eth_nic_base > ISA_MAX_ADDR) /* PCI probably */ | |
| eth_flags |= FLAG_16BIT; | |
| eth_vendor = VENDOR_NOVELL; | |
| eth_pio_read(0, romdata, sizeof(romdata)); | |
| for (i=0; i<ETH_ALEN; i++) { | |
| nic->node_addr[i] = romdata[i + ((eth_flags & FLAG_16BIT) ? i : 0)]; | |
| } | |
| nic->ioaddr = eth_nic_base; | |
| DBG ( "\nNE%c000 base %4.4x, MAC Addr %s\n", | |
| (eth_flags & FLAG_16BIT) ? '2' : '1', eth_nic_base, | |
| eth_ntoa ( nic->node_addr ) ); | |
| } | |
| } | |
| #endif | |
| if (eth_vendor == VENDOR_NONE) | |
| return(0); | |
| if (eth_vendor != VENDOR_3COM) | |
| eth_rmem = eth_bmem; | |
| ns8390_reset(nic); | |
| nic->nic_op = &ns8390_operations; | |
| /* Based on PnP ISA map */ | |
| #ifdef INCLUDE_WD | |
| dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR); | |
| dev->devid.device_id = htons(0x812a); | |
| #endif | |
| #ifdef INCLUDE_3C503 | |
| dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR); | |
| dev->devid.device_id = htons(0x80f3); | |
| #endif | |
| #ifdef INCLUDE_NE | |
| dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR); | |
| dev->devid.device_id = htons(0x80d6); | |
| #endif | |
| return 1; | |
| } | |
| #ifdef INCLUDE_WD | |
| struct isa_driver wd_driver __isa_driver = { | |
| .type = NIC_DRIVER, | |
| .name = "WD", | |
| .probe = wd_probe, | |
| .ioaddrs = 0, | |
| }; | |
| ISA_ROM("wd","WD8003/8013, SMC8216/8416, SMC 83c790 (EtherEZ)"); | |
| #endif | |
| #ifdef INCLUDE_3C503 | |
| struct isa_driver t503_driver __isa_driver = { | |
| .type = NIC_DRIVER, | |
| .name = "3C503", | |
| .probe = t503_probe, | |
| .ioaddrs = 0, | |
| }; | |
| ISA_ROM("3c503","3Com503, Etherlink II[/16]"); | |
| #endif | |
| #ifdef INCLUDE_NE | |
| struct isa_driver ne_driver __isa_driver = { | |
| .type = NIC_DRIVER, | |
| .name = "NE*000", | |
| .probe = ne_probe, | |
| .ioaddrs = 0, | |
| }; | |
| ISA_ROM("ne","NE1000/2000 and clones"); | |
| #endif | |
| #ifdef INCLUDE_NS8390 | |
| static struct pci_device_id nepci_nics[] = { | |
| /* A few NE2000 PCI clones, list not exhaustive */ | |
| PCI_ROM(0x1050, 0x0940, "winbond940", "Winbond NE2000-PCI", 0), /* Winbond 86C940 / 89C940 */ | |
| PCI_ROM(0x1050, 0x5a5a, "winbond940f", "Winbond W89c940F", 0), /* Winbond 89C940F */ | |
| PCI_ROM(0x10bd, 0x0e34, "surecom-ne34", "Surecom NE34", 0), | |
| PCI_ROM(0x10ec, 0x8029, "rtl8029", "Realtek 8029", 0), | |
| PCI_ROM(0x1106, 0x0926, "via86c926", "Via 86c926", 0), | |
| PCI_ROM(0x1186, 0x0300, "dlink-528", "D-Link DE-528", 0), | |
| PCI_ROM(0x11f6, 0x1401, "compexrl2000", "Compex ReadyLink 2000", 0), | |
| PCI_ROM(0x12c3, 0x0058, "holtek80232", "Holtek HT80232", 0), | |
| PCI_ROM(0x12c3, 0x5598, "holtek80229", "Holtek HT80229", 0), | |
| PCI_ROM(0x4a14, 0x5000, "nv5000sc", "NetVin NV5000SC", 0), | |
| PCI_ROM(0x8e2e, 0x3000, "ktiet32p2", "KTI ET32P2", 0), | |
| }; | |
| PCI_DRIVER ( nepci_driver, nepci_nics, PCI_NO_CLASS ); | |
| DRIVER ( "NE2000/PCI", nic_driver, pci_driver, nepci_driver, | |
| nepci_probe, ns8390_disable, no_fake_bss ); | |
| #endif /* INCLUDE_NS8390 */ | |
| #endif | |
| /* | |
| * Local variables: | |
| * c-basic-offset: 8 | |
| * c-indent-level: 8 | |
| * tab-width: 8 | |
| * End: | |
| */ |