| /* | |
| * Copyright (C) 2015 Michael Brown <mbrown@fensystems.co.uk>. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301, USA. | |
| * | |
| * You can also choose to distribute this program under the terms of | |
| * the Unmodified Binary Distribution Licence (as given in the file | |
| * COPYING.UBDL), provided that you have satisfied its requirements. | |
| */ | |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); | |
| FILE_SECBOOT ( PERMITTED ); | |
| #include <string.h> | |
| #include <errno.h> | |
| #include <ipxe/usb.h> | |
| #include <ipxe/usbnet.h> | |
| /** @file | |
| * | |
| * USB network devices | |
| * | |
| * USB network devices use a variety of packet formats and interface | |
| * descriptors, but tend to have several features in common: | |
| * | |
| * - a single bulk OUT endpoint | |
| * | |
| * - a single bulk IN endpoint using the generic refill mechanism | |
| * | |
| * - an optional interrupt endpoint using the generic refill mechanism | |
| * | |
| * - optional use of an alternate setting to enable the data interface | |
| * | |
| */ | |
| /** | |
| * Open USB network device | |
| * | |
| * @v usbnet USB network device | |
| * @ret rc Return status code | |
| */ | |
| int usbnet_open ( struct usbnet_device *usbnet ) { | |
| struct usb_device *usb = usbnet->func->usb; | |
| int rc; | |
| /* Open interrupt endpoint, if applicable */ | |
| if ( usbnet_has_intr ( usbnet ) && | |
| ( rc = usb_endpoint_open ( &usbnet->intr ) ) != 0 ) { | |
| DBGC ( usbnet, "USBNET %s could not open interrupt: %s\n", | |
| usbnet->func->name, strerror ( rc ) ); | |
| goto err_open_intr; | |
| } | |
| /* Refill interrupt endpoint, if applicable */ | |
| if ( usbnet_has_intr ( usbnet ) && | |
| ( rc = usb_refill ( &usbnet->intr ) ) != 0 ) { | |
| DBGC ( usbnet, "USBNET %s could not refill interrupt: %s\n", | |
| usbnet->func->name, strerror ( rc ) ); | |
| goto err_refill_intr; | |
| } | |
| /* Select alternate setting for data interface, if applicable */ | |
| if ( usbnet->alternate && | |
| ( ( rc = usb_set_interface ( usb, usbnet->data, | |
| usbnet->alternate ) ) != 0 ) ) { | |
| DBGC ( usbnet, "USBNET %s could not set alternate interface " | |
| "%d: %s\n", usbnet->func->name, usbnet->alternate, | |
| strerror ( rc ) ); | |
| goto err_set_interface; | |
| } | |
| /* Open bulk IN endpoint */ | |
| if ( ( rc = usb_endpoint_open ( &usbnet->in ) ) != 0 ) { | |
| DBGC ( usbnet, "USBNET %s could not open bulk IN: %s\n", | |
| usbnet->func->name, strerror ( rc ) ); | |
| goto err_open_in; | |
| } | |
| /* Open bulk OUT endpoint */ | |
| if ( ( rc = usb_endpoint_open ( &usbnet->out ) ) != 0 ) { | |
| DBGC ( usbnet, "USBNET %s could not open bulk OUT: %s\n", | |
| usbnet->func->name, strerror ( rc ) ); | |
| goto err_open_out; | |
| } | |
| /* Refill bulk IN endpoint */ | |
| if ( ( rc = usb_refill ( &usbnet->in ) ) != 0 ) { | |
| DBGC ( usbnet, "USBNET %s could not refill bulk IN: %s\n", | |
| usbnet->func->name, strerror ( rc ) ); | |
| goto err_refill_in; | |
| } | |
| return 0; | |
| err_refill_in: | |
| usb_endpoint_close ( &usbnet->out ); | |
| err_open_out: | |
| usb_endpoint_close ( &usbnet->in ); | |
| err_open_in: | |
| if ( usbnet->alternate ) | |
| usb_set_interface ( usb, usbnet->data, 0 ); | |
| err_set_interface: | |
| err_refill_intr: | |
| if ( usbnet_has_intr ( usbnet ) ) | |
| usb_endpoint_close ( &usbnet->intr ); | |
| err_open_intr: | |
| return rc; | |
| } | |
| /** | |
| * Close USB network device | |
| * | |
| * @v usbnet USB network device | |
| */ | |
| void usbnet_close ( struct usbnet_device *usbnet ) { | |
| struct usb_device *usb = usbnet->func->usb; | |
| /* Close bulk OUT endpoint */ | |
| usb_endpoint_close ( &usbnet->out ); | |
| /* Close bulk IN endpoint */ | |
| usb_endpoint_close ( &usbnet->in ); | |
| /* Reset alternate setting for data interface, if applicable */ | |
| if ( usbnet->alternate ) | |
| usb_set_interface ( usb, usbnet->data, 0 ); | |
| /* Close interrupt endpoint, if applicable */ | |
| if ( usbnet_has_intr ( usbnet ) ) | |
| usb_endpoint_close ( &usbnet->intr ); | |
| } | |
| /** | |
| * Refill USB network device bulk IN and interrupt endpoints | |
| * | |
| * @v usbnet USB network device | |
| * @ret rc Return status code | |
| */ | |
| int usbnet_refill ( struct usbnet_device *usbnet ) { | |
| int rc; | |
| /* Refill bulk IN endpoint */ | |
| if ( ( rc = usb_refill ( &usbnet->in ) ) != 0 ) | |
| return rc; | |
| /* Refill interrupt endpoint, if applicable */ | |
| if ( usbnet_has_intr ( usbnet ) && | |
| ( rc = usb_refill ( &usbnet->intr ) ) != 0 ) { | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Describe communications interface and interrupt endpoint | |
| * | |
| * @v usbnet USB network device | |
| * @v config Configuration descriptor | |
| * @ret rc Return status code | |
| */ | |
| static int usbnet_comms_describe ( struct usbnet_device *usbnet, | |
| struct usb_configuration_descriptor *config){ | |
| struct usb_interface_descriptor *desc; | |
| unsigned int comms; | |
| unsigned int i; | |
| int rc; | |
| /* Iterate over all available interfaces */ | |
| for ( i = 0 ; i < usbnet->func->desc.count ; i++ ) { | |
| /* Get interface number */ | |
| comms = usbnet->func->interface[i]; | |
| /* Locate interface descriptor */ | |
| desc = usb_interface_descriptor ( config, comms, 0 ); | |
| if ( ! desc ) | |
| continue; | |
| /* Describe interrupt endpoint */ | |
| if ( ( rc = usb_endpoint_described ( &usbnet->intr, config, | |
| desc, USB_INTERRUPT_IN, | |
| 0 ) ) != 0 ) | |
| continue; | |
| /* Record communications interface */ | |
| usbnet->comms = comms; | |
| DBGC ( usbnet, "USBNET %s found communications interface %d\n", | |
| usbnet->func->name, comms ); | |
| return 0; | |
| } | |
| DBGC ( usbnet, "USBNET %s found no communications interface\n", | |
| usbnet->func->name ); | |
| return -ENOENT; | |
| } | |
| /** | |
| * Describe data interface and bulk endpoints | |
| * | |
| * @v usbnet USB network device | |
| * @v config Configuration descriptor | |
| * @ret rc Return status code | |
| */ | |
| static int usbnet_data_describe ( struct usbnet_device *usbnet, | |
| struct usb_configuration_descriptor *config ){ | |
| struct usb_interface_descriptor *desc; | |
| unsigned int data; | |
| unsigned int alt; | |
| unsigned int i; | |
| int rc; | |
| /* Iterate over all available interfaces */ | |
| for ( i = 0 ; i < usbnet->func->desc.count ; i++ ) { | |
| /* Get interface number */ | |
| data = usbnet->func->interface[i]; | |
| /* Iterate over all existent alternate settings */ | |
| for ( alt = 0 ; ; alt++ ) { | |
| /* Locate interface descriptor */ | |
| desc = usb_interface_descriptor ( config, data, alt ); | |
| if ( ! desc ) | |
| break; | |
| /* Describe bulk IN endpoint */ | |
| if ( ( rc = usb_endpoint_described ( &usbnet->in, | |
| config, desc, | |
| USB_BULK_IN, | |
| 0 ) ) != 0 ) | |
| continue; | |
| /* Describe bulk OUT endpoint */ | |
| if ( ( rc = usb_endpoint_described ( &usbnet->out, | |
| config, desc, | |
| USB_BULK_OUT, | |
| 0 ) ) != 0 ) | |
| continue; | |
| /* Record data interface and alternate setting */ | |
| usbnet->data = data; | |
| usbnet->alternate = alt; | |
| DBGC ( usbnet, "USBNET %s found data interface %d", | |
| usbnet->func->name, data ); | |
| if ( alt ) | |
| DBGC ( usbnet, " using alternate %d", alt ); | |
| DBGC ( usbnet, "\n" ); | |
| return 0; | |
| } | |
| } | |
| DBGC ( usbnet, "USBNET %s found no data interface\n", | |
| usbnet->func->name ); | |
| return -ENOENT; | |
| } | |
| /** | |
| * Describe USB network device interfaces | |
| * | |
| * @v usbnet USB network device | |
| * @v config Configuration descriptor | |
| * @ret rc Return status code | |
| */ | |
| int usbnet_describe ( struct usbnet_device *usbnet, | |
| struct usb_configuration_descriptor *config ) { | |
| int rc; | |
| /* Describe communications interface, if applicable */ | |
| if ( usbnet_has_intr ( usbnet ) && | |
| ( rc = usbnet_comms_describe ( usbnet, config ) ) != 0 ) { | |
| return rc; | |
| } | |
| /* Describe data interface */ | |
| if ( ( rc = usbnet_data_describe ( usbnet, config ) ) != 0 ) | |
| return rc; | |
| return 0; | |
| } |