| /* | |
| * Copyright (C) 2012 Michael Brown <mbrown@fensystems.co.uk>. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301, USA. | |
| */ | |
| FILE_LICENCE ( GPL2_OR_LATER ); | |
| #include <stdint.h> | |
| #include <string.h> | |
| #include <unistd.h> | |
| #include <errno.h> | |
| #include <byteswap.h> | |
| #include <ipxe/netdevice.h> | |
| #include <ipxe/ethernet.h> | |
| #include <ipxe/if_ether.h> | |
| #include <ipxe/iobuf.h> | |
| #include <ipxe/malloc.h> | |
| #include <ipxe/pci.h> | |
| #include <ipxe/nvs.h> | |
| #include <ipxe/bitbash.h> | |
| #include <ipxe/spi_bit.h> | |
| #include <ipxe/threewire.h> | |
| #include "natsemi.h" | |
| /** @file | |
| * | |
| * National Semiconductor "MacPhyter" network card driver | |
| * | |
| * Based on the following datasheets: | |
| * | |
| * http://www.ti.com/lit/ds/symlink/dp83820.pdf | |
| * http://www.datasheets.org.uk/indexdl/Datasheet-03/DSA0041338.pdf | |
| * | |
| */ | |
| /****************************************************************************** | |
| * | |
| * EEPROM interface | |
| * | |
| ****************************************************************************** | |
| */ | |
| /** Pin mapping for SPI bit-bashing interface */ | |
| static const uint8_t natsemi_eeprom_bits[] = { | |
| [SPI_BIT_SCLK] = NATSEMI_MEAR_EECLK, | |
| [SPI_BIT_MOSI] = NATSEMI_MEAR_EEDI, | |
| [SPI_BIT_MISO] = NATSEMI_MEAR_EEDO, | |
| [SPI_BIT_SS(0)] = NATSEMI_MEAR_EESEL, | |
| }; | |
| /** | |
| * Read input bit | |
| * | |
| * @v basher Bit-bashing interface | |
| * @v bit_id Bit number | |
| * @ret zero Input is a logic 0 | |
| * @ret non-zero Input is a logic 1 | |
| */ | |
| static int natsemi_spi_read_bit ( struct bit_basher *basher, | |
| unsigned int bit_id ) { | |
| struct natsemi_nic *natsemi = container_of ( basher, struct natsemi_nic, | |
| spibit.basher ); | |
| uint32_t mask = natsemi_eeprom_bits[bit_id]; | |
| uint32_t reg; | |
| DBG_DISABLE ( DBGLVL_IO ); | |
| reg = readl ( natsemi->regs + NATSEMI_MEAR ); | |
| DBG_ENABLE ( DBGLVL_IO ); | |
| return ( reg & mask ); | |
| } | |
| /** | |
| * Set/clear output bit | |
| * | |
| * @v basher Bit-bashing interface | |
| * @v bit_id Bit number | |
| * @v data Value to write | |
| */ | |
| static void natsemi_spi_write_bit ( struct bit_basher *basher, | |
| unsigned int bit_id, unsigned long data ) { | |
| struct natsemi_nic *natsemi = container_of ( basher, struct natsemi_nic, | |
| spibit.basher ); | |
| uint32_t mask = natsemi_eeprom_bits[bit_id]; | |
| uint32_t reg; | |
| DBG_DISABLE ( DBGLVL_IO ); | |
| reg = readl ( natsemi->regs + NATSEMI_MEAR ); | |
| reg &= ~mask; | |
| reg |= ( data & mask ); | |
| writel ( reg, natsemi->regs + NATSEMI_MEAR ); | |
| DBG_ENABLE ( DBGLVL_IO ); | |
| } | |
| /** SPI bit-bashing interface */ | |
| static struct bit_basher_operations natsemi_basher_ops = { | |
| .read = natsemi_spi_read_bit, | |
| .write = natsemi_spi_write_bit, | |
| }; | |
| /** | |
| * Initialise EEPROM | |
| * | |
| * @v natsemi National Semiconductor device | |
| */ | |
| static void natsemi_init_eeprom ( struct natsemi_nic *natsemi ) { | |
| /* Initialise SPI bit-bashing interface */ | |
| natsemi->spibit.basher.op = &natsemi_basher_ops; | |
| natsemi->spibit.bus.mode = SPI_MODE_THREEWIRE; | |
| natsemi->spibit.endianness = | |
| ( ( natsemi->flags & NATSEMI_EEPROM_LITTLE_ENDIAN ) ? | |
| SPI_BIT_LITTLE_ENDIAN : SPI_BIT_BIG_ENDIAN ); | |
| init_spi_bit_basher ( &natsemi->spibit ); | |
| /* Initialise EEPROM device */ | |
| init_at93c06 ( &natsemi->eeprom, 16 ); | |
| natsemi->eeprom.bus = &natsemi->spibit.bus; | |
| } | |
| /** | |
| * Get hardware address from sane EEPROM data | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v eeprom EEPROM data | |
| * @v hw_addr Hardware address to fill in | |
| */ | |
| static void natsemi_hwaddr_sane ( struct natsemi_nic *natsemi, | |
| const uint16_t *eeprom, uint16_t *hw_addr ) { | |
| int i; | |
| /* Copy MAC address from EEPROM data */ | |
| for ( i = ( ( ETH_ALEN / 2 ) - 1 ) ; i >= 0 ; i-- ) | |
| *(hw_addr++) = eeprom[ NATSEMI_EEPROM_MAC_SANE + i ]; | |
| DBGC ( natsemi, "NATSEMI %p has sane EEPROM layout\n", natsemi ); | |
| } | |
| /** | |
| * Get hardware address from insane EEPROM data | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v eeprom EEPROM data | |
| * @v hw_addr Hardware address to fill in | |
| */ | |
| static void natsemi_hwaddr_insane ( struct natsemi_nic *natsemi, | |
| const uint16_t *eeprom, | |
| uint16_t *hw_addr ) { | |
| unsigned int i; | |
| unsigned int offset; | |
| uint16_t word; | |
| /* Copy MAC address from EEPROM data */ | |
| for ( i = 0 ; i < ( ETH_ALEN / 2 ) ; i++ ) { | |
| offset = ( NATSEMI_EEPROM_MAC_INSANE + i ); | |
| word = ( ( le16_to_cpu ( eeprom[ offset ] ) >> 15 ) | | |
| ( le16_to_cpu ( eeprom[ offset + 1 ] << 1 ) ) ); | |
| hw_addr[i] = cpu_to_le16 ( word ); | |
| } | |
| DBGC ( natsemi, "NATSEMI %p has insane EEPROM layout\n", natsemi ); | |
| } | |
| /** | |
| * Get hardware address from EEPROM | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v hw_addr Hardware address to fill in | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_hwaddr ( struct natsemi_nic *natsemi, void *hw_addr ) { | |
| uint16_t buf[NATSEMI_EEPROM_SIZE]; | |
| void ( * extract ) ( struct natsemi_nic *natsemi, | |
| const uint16_t *eeprom, uint16_t *hw_addr ); | |
| int rc; | |
| /* Read EEPROM contents */ | |
| if ( ( rc = nvs_read ( &natsemi->eeprom.nvs, 0, buf, | |
| sizeof ( buf ) ) ) != 0 ) { | |
| DBGC ( natsemi, "NATSEMI %p could not read EEPROM: %s\n", | |
| natsemi, strerror ( rc ) ); | |
| return rc; | |
| } | |
| DBGC2 ( natsemi, "NATSEMI %p EEPROM contents:\n", natsemi ); | |
| DBGC2_HDA ( natsemi, 0, buf, sizeof ( buf ) ); | |
| /* Extract MAC address from EEPROM contents */ | |
| extract = ( ( natsemi->flags & NATSEMI_EEPROM_INSANE ) ? | |
| natsemi_hwaddr_insane : natsemi_hwaddr_sane ); | |
| extract ( natsemi, buf, hw_addr ); | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * Device reset | |
| * | |
| ****************************************************************************** | |
| */ | |
| /** | |
| * Reset controller chip | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_soft_reset ( struct natsemi_nic *natsemi ) { | |
| unsigned int i; | |
| /* Initiate reset */ | |
| writel ( NATSEMI_CR_RST, natsemi->regs + NATSEMI_CR ); | |
| /* Wait for reset to complete */ | |
| for ( i = 0 ; i < NATSEMI_RESET_MAX_WAIT_MS ; i++ ) { | |
| /* If reset is not complete, delay 1ms and retry */ | |
| if ( readl ( natsemi->regs + NATSEMI_CR ) & NATSEMI_CR_RST ) { | |
| mdelay ( 1 ); | |
| continue; | |
| } | |
| return 0; | |
| } | |
| DBGC ( natsemi, "NATSEMI %p timed out waiting for reset\n", natsemi ); | |
| return -ETIMEDOUT; | |
| } | |
| /** | |
| * Reload configuration from EEPROM | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_reload_config ( struct natsemi_nic *natsemi ) { | |
| unsigned int i; | |
| /* Initiate reload */ | |
| writel ( NATSEMI_PTSCR_EELOAD_EN, natsemi->regs + NATSEMI_PTSCR ); | |
| /* Wait for reload to complete */ | |
| for ( i = 0 ; i < NATSEMI_EELOAD_MAX_WAIT_MS ; i++ ) { | |
| /* If reload is not complete, delay 1ms and retry */ | |
| if ( readl ( natsemi->regs + NATSEMI_PTSCR ) & | |
| NATSEMI_PTSCR_EELOAD_EN ) { | |
| mdelay ( 1 ); | |
| continue; | |
| } | |
| return 0; | |
| } | |
| DBGC ( natsemi, "NATSEMI %p timed out waiting for configuration " | |
| "reload\n", natsemi ); | |
| return -ETIMEDOUT; | |
| } | |
| /** | |
| * Reset hardware | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_reset ( struct natsemi_nic *natsemi ) { | |
| uint32_t cfg; | |
| int rc; | |
| /* Perform soft reset */ | |
| if ( ( rc = natsemi_soft_reset ( natsemi ) ) != 0 ) | |
| return rc; | |
| /* Reload configuration from EEPROM */ | |
| if ( ( rc = natsemi_reload_config ( natsemi ) ) != 0 ) | |
| return rc; | |
| /* Configure 64-bit operation, if applicable */ | |
| cfg = readl ( natsemi->regs + NATSEMI_CFG ); | |
| if ( natsemi->flags & NATSEMI_64BIT ) { | |
| cfg |= ( NATSEMI_CFG_M64ADDR | NATSEMI_CFG_EXTSTS_EN ); | |
| if ( ! ( cfg & NATSEMI_CFG_PCI64_DET ) ) | |
| cfg &= ~NATSEMI_CFG_DATA64_EN; | |
| } | |
| writel ( cfg, natsemi->regs + NATSEMI_CFG ); | |
| /* Invalidate link status cache to force an update */ | |
| natsemi->cfg = ~cfg; | |
| DBGC ( natsemi, "NATSEMI %p using configuration %08x\n", | |
| natsemi, cfg ); | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * Link state | |
| * | |
| ****************************************************************************** | |
| */ | |
| /** | |
| * Check link state | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_check_link ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| uint32_t cfg; | |
| /* Read link status */ | |
| cfg = readl ( natsemi->regs + NATSEMI_CFG ); | |
| /* Do nothing unless link status has changed */ | |
| if ( cfg == natsemi->cfg ) | |
| return; | |
| /* Set gigabit mode (if applicable) */ | |
| if ( natsemi->flags & NATSEMI_1000 ) { | |
| cfg &= ~NATSEMI_CFG_MODE_1000; | |
| if ( ! ( cfg & NATSEMI_CFG_SPDSTS1 ) ) | |
| cfg |= NATSEMI_CFG_MODE_1000; | |
| writel ( cfg, natsemi->regs + NATSEMI_CFG ); | |
| } | |
| /* Update link status */ | |
| natsemi->cfg = cfg; | |
| DBGC ( natsemi, "NATSEMI %p link status is %08x\n", natsemi, cfg ); | |
| /* Update network device */ | |
| if ( cfg & NATSEMI_CFG_LNKSTS ) { | |
| netdev_link_up ( netdev ); | |
| } else { | |
| netdev_link_down ( netdev ); | |
| } | |
| } | |
| /****************************************************************************** | |
| * | |
| * Network device interface | |
| * | |
| ****************************************************************************** | |
| */ | |
| /** | |
| * Set perfect match filter address | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v mac MAC address | |
| */ | |
| static void natsemi_pmatch ( struct natsemi_nic *natsemi, const void *mac ) { | |
| const uint16_t *pmatch = mac; | |
| uint32_t rfcr; | |
| unsigned int rfaddr; | |
| unsigned int i; | |
| for ( i = 0 ; i < ETH_ALEN ; i += sizeof ( *pmatch ) ) { | |
| /* Select receive filter register address */ | |
| rfaddr = ( NATSEMI_RFADDR_PMATCH_BASE + i ); | |
| rfcr = readl ( natsemi->regs + NATSEMI_RFCR ); | |
| rfcr &= ~NATSEMI_RFCR_RFADDR_MASK; | |
| rfcr |= NATSEMI_RFCR_RFADDR ( rfaddr ); | |
| writel ( rfcr, natsemi->regs + NATSEMI_RFCR ); | |
| /* Write receive filter data */ | |
| writel ( ( le16_to_cpu ( *(pmatch++) ) | NATSEMI_RFDR_BMASK ), | |
| natsemi->regs + NATSEMI_RFDR ); | |
| } | |
| } | |
| /** | |
| * Create descriptor ring | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v ring Descriptor ring | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_create_ring ( struct natsemi_nic *natsemi, | |
| struct natsemi_ring *ring ) { | |
| size_t len = ( ring->count * sizeof ( ring->desc[0] ) ); | |
| union natsemi_descriptor *desc; | |
| union natsemi_descriptor *linked_desc; | |
| physaddr_t address; | |
| physaddr_t link; | |
| size_t offset; | |
| unsigned int i; | |
| int rc; | |
| /* Calculate descriptor offset */ | |
| offset = ( ( natsemi->flags & NATSEMI_64BIT ) ? 0 : | |
| offsetof ( typeof ( desc[i].d32pad ), d32 ) ); | |
| /* Allocate descriptor ring. Align ring on its own size to | |
| * ensure that it can't possibly cross the boundary of 32-bit | |
| * address space. | |
| */ | |
| ring->desc = malloc_phys ( len, len ); | |
| if ( ! ring->desc ) { | |
| rc = -ENOMEM; | |
| goto err_alloc; | |
| } | |
| address = ( virt_to_bus ( ring->desc ) + offset ); | |
| /* Check address is usable by card */ | |
| if ( ! natsemi_address_ok ( natsemi, address ) ) { | |
| DBGC ( natsemi, "NATSEMI %p cannot support 64-bit ring " | |
| "address\n", natsemi ); | |
| rc = -ENOTSUP; | |
| goto err_64bit; | |
| } | |
| /* Initialise descriptor ring */ | |
| memset ( ring->desc, 0, len ); | |
| for ( i = 0 ; i < ring->count ; i++ ) { | |
| linked_desc = &ring->desc [ ( i + 1 ) % ring->count ]; | |
| link = ( virt_to_bus ( linked_desc ) + offset ); | |
| if ( natsemi->flags & NATSEMI_64BIT ) { | |
| ring->desc[i].d64.link = cpu_to_le64 ( link ); | |
| } else { | |
| ring->desc[i].d32pad.d32.link = cpu_to_le32 ( link ); | |
| } | |
| } | |
| /* Program ring address */ | |
| writel ( ( address & 0xffffffffUL ), natsemi->regs + ring->reg ); | |
| if ( natsemi->flags & NATSEMI_64BIT ) { | |
| if ( sizeof ( physaddr_t ) > sizeof ( uint32_t ) ) { | |
| writel ( ( ( ( uint64_t ) address ) >> 32 ), | |
| natsemi->regs + ring->reg + 4 ); | |
| } else { | |
| writel ( 0, natsemi->regs + ring->reg + 4 ); | |
| } | |
| } | |
| DBGC ( natsemi, "NATSEMI %p ring %02x is at [%08llx,%08llx)\n", | |
| natsemi, ring->reg, | |
| ( ( unsigned long long ) virt_to_bus ( ring->desc ) ), | |
| ( ( unsigned long long ) virt_to_bus ( ring->desc ) + len ) ); | |
| return 0; | |
| err_64bit: | |
| free_phys ( ring->desc, len ); | |
| ring->desc = NULL; | |
| err_alloc: | |
| return rc; | |
| } | |
| /** | |
| * Destroy descriptor ring | |
| * | |
| * @v natsemi National Semiconductor device | |
| * @v ring Descriptor ring | |
| */ | |
| static void natsemi_destroy_ring ( struct natsemi_nic *natsemi, | |
| struct natsemi_ring *ring ) { | |
| size_t len = ( ring->count * sizeof ( ring->desc[0] ) ); | |
| /* Clear ring address */ | |
| writel ( 0, natsemi->regs + ring->reg ); | |
| if ( natsemi->flags & NATSEMI_64BIT ) | |
| writel ( 0, natsemi->regs + ring->reg + 4 ); | |
| /* Free descriptor ring */ | |
| free_phys ( ring->desc, len ); | |
| ring->desc = NULL; | |
| ring->prod = 0; | |
| ring->cons = 0; | |
| } | |
| /** | |
| * Refill receive descriptor ring | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_refill_rx ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| union natsemi_descriptor *rx; | |
| struct io_buffer *iobuf; | |
| unsigned int rx_idx; | |
| physaddr_t address; | |
| while ( ( natsemi->rx.prod - natsemi->rx.cons ) < NATSEMI_NUM_RX_DESC ){ | |
| /* Allocate I/O buffer */ | |
| iobuf = alloc_iob ( NATSEMI_RX_MAX_LEN ); | |
| if ( ! iobuf ) { | |
| /* Wait for next refill */ | |
| return; | |
| } | |
| /* Check address is usable by card */ | |
| address = virt_to_bus ( iobuf->data ); | |
| if ( ! natsemi_address_ok ( natsemi, address ) ) { | |
| DBGC ( natsemi, "NATSEMI %p cannot support 64-bit RX " | |
| "buffer address\n", natsemi ); | |
| netdev_rx_err ( netdev, iobuf, -ENOTSUP ); | |
| return; | |
| } | |
| /* Get next receive descriptor */ | |
| rx_idx = ( natsemi->rx.prod++ % NATSEMI_NUM_RX_DESC ); | |
| rx = &natsemi->rx.desc[rx_idx]; | |
| /* Populate receive descriptor */ | |
| if ( natsemi->flags & NATSEMI_64BIT ) { | |
| rx->d64.bufptr = cpu_to_le64 ( address ); | |
| } else { | |
| rx->d32pad.d32.bufptr = cpu_to_le32 ( address ); | |
| } | |
| wmb(); | |
| rx->common.cmdsts = cpu_to_le32 ( NATSEMI_DESC_INTR | | |
| NATSEMI_RX_MAX_LEN ); | |
| wmb(); | |
| /* Record I/O buffer */ | |
| assert ( natsemi->rx_iobuf[rx_idx] == NULL ); | |
| natsemi->rx_iobuf[rx_idx] = iobuf; | |
| /* Notify card that there are descriptors available */ | |
| writel ( NATSEMI_CR_RXE, natsemi->regs + NATSEMI_CR ); | |
| DBGC2 ( natsemi, "NATSEMI %p RX %d is [%llx,%llx)\n", natsemi, | |
| rx_idx, ( ( unsigned long long ) address ), | |
| ( ( unsigned long long ) address + NATSEMI_RX_MAX_LEN)); | |
| } | |
| } | |
| /** | |
| * Open network device | |
| * | |
| * @v netdev Network device | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_open ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| int rc; | |
| /* Set MAC address */ | |
| natsemi_pmatch ( natsemi, netdev->ll_addr ); | |
| /* Create transmit descriptor ring */ | |
| if ( ( rc = natsemi_create_ring ( natsemi, &natsemi->tx ) ) != 0 ) | |
| goto err_create_tx; | |
| /* Set transmit configuration */ | |
| writel ( ( NATSEMI_TXCFG_CSI | NATSEMI_TXCFG_HBI | NATSEMI_TXCFG_ATP | | |
| NATSEMI_TXCFG_ECRETRY | NATSEMI_TXCFG_MXDMA_DEFAULT | | |
| NATSEMI_TXCFG_FLTH_DEFAULT | NATSEMI_TXCFG_DRTH_DEFAULT ), | |
| ( natsemi->regs + ( ( natsemi->flags & NATSEMI_64BIT ) ? | |
| NATSEMI_TXCFG_64 : NATSEMI_TXCFG_32 ) ) ); | |
| /* Create receive descriptor ring */ | |
| if ( ( rc = natsemi_create_ring ( natsemi, &natsemi->rx ) ) != 0 ) | |
| goto err_create_rx; | |
| /* Set receive configuration */ | |
| writel ( ( NATSEMI_RXCFG_ARP | NATSEMI_RXCFG_ATX | NATSEMI_RXCFG_ALP | | |
| NATSEMI_RXCFG_MXDMA_DEFAULT | NATSEMI_RXCFG_DRTH_DEFAULT ), | |
| ( natsemi->regs + ( ( natsemi->flags & NATSEMI_64BIT ) ? | |
| NATSEMI_RXCFG_64 : NATSEMI_RXCFG_32 ) ) ); | |
| /* Set receive filter configuration */ | |
| writel ( ( NATSEMI_RFCR_RFEN | NATSEMI_RFCR_AAB | NATSEMI_RFCR_AAM | | |
| NATSEMI_RFCR_AAU ), natsemi->regs + NATSEMI_RFCR ); | |
| /* Fill receive ring */ | |
| natsemi_refill_rx ( netdev ); | |
| /* Unmask transmit and receive interrupts. (Interrupts will | |
| * not be generated unless enabled via the IER.) | |
| */ | |
| writel ( ( NATSEMI_IRQ_TXDESC | NATSEMI_IRQ_RXDESC ), | |
| natsemi->regs + NATSEMI_IMR ); | |
| /* Update link state */ | |
| natsemi_check_link ( netdev ); | |
| return 0; | |
| natsemi_destroy_ring ( natsemi, &natsemi->rx ); | |
| err_create_rx: | |
| natsemi_destroy_ring ( natsemi, &natsemi->tx ); | |
| err_create_tx: | |
| return rc; | |
| } | |
| /** | |
| * Close network device | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_close ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| unsigned int i; | |
| /* Mask transmit and receive interrupts */ | |
| writel ( 0, natsemi->regs + NATSEMI_IMR ); | |
| /* Reset and disable transmitter and receiver */ | |
| writel ( ( NATSEMI_CR_RXR | NATSEMI_CR_TXR ), | |
| natsemi->regs + NATSEMI_CR ); | |
| /* Discard any unused receive buffers */ | |
| for ( i = 0 ; i < NATSEMI_NUM_RX_DESC ; i++ ) { | |
| if ( natsemi->rx_iobuf[i] ) | |
| free_iob ( natsemi->rx_iobuf[i] ); | |
| natsemi->rx_iobuf[i] = NULL; | |
| } | |
| /* Destroy receive descriptor ring */ | |
| natsemi_destroy_ring ( natsemi, &natsemi->rx ); | |
| /* Destroy transmit descriptor ring */ | |
| natsemi_destroy_ring ( natsemi, &natsemi->tx ); | |
| } | |
| /** | |
| * Transmit packet | |
| * | |
| * @v netdev Network device | |
| * @v iobuf I/O buffer | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_transmit ( struct net_device *netdev, | |
| struct io_buffer *iobuf ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| union natsemi_descriptor *tx; | |
| unsigned int tx_idx; | |
| physaddr_t address; | |
| /* Check address is usable by card */ | |
| address = virt_to_bus ( iobuf->data ); | |
| if ( ! natsemi_address_ok ( natsemi, address ) ) { | |
| DBGC ( natsemi, "NATSEMI %p cannot support 64-bit TX buffer " | |
| "address\n", natsemi ); | |
| return -ENOTSUP; | |
| } | |
| /* Get next transmit descriptor */ | |
| if ( ( natsemi->tx.prod - natsemi->tx.cons ) >= NATSEMI_NUM_TX_DESC ) { | |
| DBGC ( natsemi, "NATSEMI %p out of transmit descriptors\n", | |
| natsemi ); | |
| return -ENOBUFS; | |
| } | |
| tx_idx = ( natsemi->tx.prod++ % NATSEMI_NUM_TX_DESC ); | |
| tx = &natsemi->tx.desc[tx_idx]; | |
| /* Populate transmit descriptor */ | |
| if ( natsemi->flags & NATSEMI_64BIT ) { | |
| tx->d64.bufptr = cpu_to_le64 ( address ); | |
| } else { | |
| tx->d32pad.d32.bufptr = cpu_to_le32 ( address ); | |
| } | |
| wmb(); | |
| tx->common.cmdsts = cpu_to_le32 ( NATSEMI_DESC_OWN | NATSEMI_DESC_INTR | | |
| iob_len ( iobuf ) ); | |
| wmb(); | |
| /* Notify card that there are packets ready to transmit */ | |
| writel ( NATSEMI_CR_TXE, natsemi->regs + NATSEMI_CR ); | |
| DBGC2 ( natsemi, "NATSEMI %p TX %d is [%llx,%llx)\n", natsemi, tx_idx, | |
| ( ( unsigned long long ) address ), | |
| ( ( unsigned long long ) address + iob_len ( iobuf ) ) ); | |
| return 0; | |
| } | |
| /** | |
| * Poll for completed packets | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_poll_tx ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| union natsemi_descriptor *tx; | |
| unsigned int tx_idx; | |
| /* Check for completed packets */ | |
| while ( natsemi->tx.cons != natsemi->tx.prod ) { | |
| /* Get next transmit descriptor */ | |
| tx_idx = ( natsemi->tx.cons % NATSEMI_NUM_TX_DESC ); | |
| tx = &natsemi->tx.desc[tx_idx]; | |
| /* Stop if descriptor is still in use */ | |
| if ( tx->common.cmdsts & cpu_to_le32 ( NATSEMI_DESC_OWN ) ) | |
| return; | |
| /* Complete TX descriptor */ | |
| if ( tx->common.cmdsts & cpu_to_le32 ( NATSEMI_DESC_OK ) ) { | |
| DBGC2 ( natsemi, "NATSEMI %p TX %d complete\n", | |
| natsemi, tx_idx ); | |
| netdev_tx_complete_next ( netdev ); | |
| } else { | |
| DBGC ( natsemi, "NATSEMI %p TX %d completion error " | |
| "(%08x)\n", natsemi, tx_idx, | |
| le32_to_cpu ( tx->common.cmdsts ) ); | |
| netdev_tx_complete_next_err ( netdev, -EIO ); | |
| } | |
| natsemi->tx.cons++; | |
| } | |
| } | |
| /** | |
| * Poll for received packets | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_poll_rx ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| union natsemi_descriptor *rx; | |
| struct io_buffer *iobuf; | |
| unsigned int rx_idx; | |
| size_t len; | |
| /* Check for received packets */ | |
| while ( natsemi->rx.cons != natsemi->rx.prod ) { | |
| /* Get next receive descriptor */ | |
| rx_idx = ( natsemi->rx.cons % NATSEMI_NUM_RX_DESC ); | |
| rx = &natsemi->rx.desc[rx_idx]; | |
| /* Stop if descriptor is still in use */ | |
| if ( ! ( rx->common.cmdsts & NATSEMI_DESC_OWN ) ) | |
| return; | |
| /* Populate I/O buffer */ | |
| iobuf = natsemi->rx_iobuf[rx_idx]; | |
| natsemi->rx_iobuf[rx_idx] = NULL; | |
| len = ( le32_to_cpu ( rx->common.cmdsts ) & | |
| NATSEMI_DESC_SIZE_MASK ); | |
| iob_put ( iobuf, len - 4 /* strip CRC */ ); | |
| /* Hand off to network stack */ | |
| if ( rx->common.cmdsts & cpu_to_le32 ( NATSEMI_DESC_OK ) ) { | |
| DBGC2 ( natsemi, "NATSEMI %p RX %d complete (length " | |
| "%zd)\n", natsemi, rx_idx, len ); | |
| netdev_rx ( netdev, iobuf ); | |
| } else { | |
| DBGC ( natsemi, "NATSEMI %p RX %d error (length %zd, " | |
| "status %08x)\n", natsemi, rx_idx, len, | |
| le32_to_cpu ( rx->common.cmdsts ) ); | |
| netdev_rx_err ( netdev, iobuf, -EIO ); | |
| } | |
| natsemi->rx.cons++; | |
| } | |
| } | |
| /** | |
| * Poll for completed and received packets | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void natsemi_poll ( struct net_device *netdev ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| uint32_t isr; | |
| /* Poll for link state. The PHY interrupt seems not to | |
| * function as expected, and polling for the link state is | |
| * only a single register read. | |
| */ | |
| natsemi_check_link ( netdev ); | |
| /* Check for and acknowledge interrupts */ | |
| isr = readl ( natsemi->regs + NATSEMI_ISR ); | |
| if ( ! isr ) | |
| return; | |
| /* Poll for TX completions, if applicable */ | |
| if ( isr & NATSEMI_IRQ_TXDESC ) | |
| natsemi_poll_tx ( netdev ); | |
| /* Poll for RX completionsm, if applicable */ | |
| if ( isr & NATSEMI_IRQ_RXDESC ) | |
| natsemi_poll_rx ( netdev ); | |
| /* Refill RX ring */ | |
| natsemi_refill_rx ( netdev ); | |
| } | |
| /** | |
| * Enable or disable interrupts | |
| * | |
| * @v netdev Network device | |
| * @v enable Interrupts should be enabled | |
| */ | |
| static void natsemi_irq ( struct net_device *netdev, int enable ) { | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| /* Enable or disable interrupts */ | |
| writel ( ( enable ? NATSEMI_IER_IE : 0 ), natsemi->regs + NATSEMI_IER ); | |
| } | |
| /** National Semiconductor network device operations */ | |
| static struct net_device_operations natsemi_operations = { | |
| .open = natsemi_open, | |
| .close = natsemi_close, | |
| .transmit = natsemi_transmit, | |
| .poll = natsemi_poll, | |
| .irq = natsemi_irq, | |
| }; | |
| /****************************************************************************** | |
| * | |
| * PCI interface | |
| * | |
| ****************************************************************************** | |
| */ | |
| /** | |
| * Probe PCI device | |
| * | |
| * @v pci PCI device | |
| * @ret rc Return status code | |
| */ | |
| static int natsemi_probe ( struct pci_device *pci ) { | |
| struct net_device *netdev; | |
| struct natsemi_nic *natsemi; | |
| int rc; | |
| /* Allocate and initialise net device */ | |
| netdev = alloc_etherdev ( sizeof ( *natsemi ) ); | |
| if ( ! netdev ) { | |
| rc = -ENOMEM; | |
| goto err_alloc; | |
| } | |
| netdev_init ( netdev, &natsemi_operations ); | |
| natsemi = netdev->priv; | |
| pci_set_drvdata ( pci, netdev ); | |
| netdev->dev = &pci->dev; | |
| memset ( natsemi, 0, sizeof ( *natsemi ) ); | |
| natsemi->flags = pci->id->driver_data; | |
| natsemi_init_ring ( &natsemi->tx, NATSEMI_NUM_TX_DESC, NATSEMI_TXDP ); | |
| natsemi_init_ring ( &natsemi->rx, NATSEMI_NUM_RX_DESC, NATSEMI_RXDP ); | |
| /* Fix up PCI device */ | |
| adjust_pci_device ( pci ); | |
| /* Map registers */ | |
| natsemi->regs = pci_ioremap ( pci, pci->membase, NATSEMI_BAR_SIZE ); | |
| if ( ! natsemi->regs ) { | |
| rc = -ENODEV; | |
| goto err_ioremap; | |
| } | |
| /* Reset the NIC */ | |
| if ( ( rc = natsemi_reset ( natsemi ) ) != 0 ) | |
| goto err_reset; | |
| /* Initialise EEPROM */ | |
| natsemi_init_eeprom ( natsemi ); | |
| /* Read initial MAC address */ | |
| if ( ( rc = natsemi_hwaddr ( natsemi, netdev->hw_addr ) ) != 0 ) | |
| goto err_hwaddr; | |
| /* Register network device */ | |
| if ( ( rc = register_netdev ( netdev ) ) != 0 ) | |
| goto err_register_netdev; | |
| /* Set initial link state */ | |
| natsemi_check_link ( netdev ); | |
| return 0; | |
| unregister_netdev ( netdev ); | |
| err_register_netdev: | |
| err_hwaddr: | |
| natsemi_reset ( natsemi ); | |
| err_reset: | |
| iounmap ( natsemi->regs ); | |
| err_ioremap: | |
| netdev_nullify ( netdev ); | |
| netdev_put ( netdev ); | |
| err_alloc: | |
| return rc; | |
| } | |
| /** | |
| * Remove PCI device | |
| * | |
| * @v pci PCI device | |
| */ | |
| static void natsemi_remove ( struct pci_device *pci ) { | |
| struct net_device *netdev = pci_get_drvdata ( pci ); | |
| struct natsemi_nic *natsemi = netdev->priv; | |
| /* Unregister network device */ | |
| unregister_netdev ( netdev ); | |
| /* Reset card */ | |
| natsemi_reset ( natsemi ); | |
| /* Free network device */ | |
| iounmap ( natsemi->regs ); | |
| netdev_nullify ( netdev ); | |
| netdev_put ( netdev ); | |
| } | |
| /** Flags for DP83815 */ | |
| #define DP83815_FLAGS ( NATSEMI_EEPROM_LITTLE_ENDIAN | NATSEMI_EEPROM_INSANE ) | |
| /** Flags for DP83820 */ | |
| #define DP83820_FLAGS ( NATSEMI_64BIT | NATSEMI_1000 ) | |
| /** National Semiconductor PCI device IDs */ | |
| static struct pci_device_id natsemi_nics[] = { | |
| PCI_ROM ( 0x100b, 0x0020, "dp83815", "DP83815", DP83815_FLAGS ), | |
| PCI_ROM ( 0x100b, 0x0022, "dp83820", "DP83820", DP83820_FLAGS ), | |
| }; | |
| /** National Semiconductor PCI driver */ | |
| struct pci_driver natsemi_driver __pci_driver = { | |
| .ids = natsemi_nics, | |
| .id_count = ( sizeof ( natsemi_nics ) / sizeof ( natsemi_nics[0] ) ), | |
| .probe = natsemi_probe, | |
| .remove = natsemi_remove, | |
| }; |