| #include <stdint.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <errno.h> |
| #include <ipxe/io.h> |
| #include <unistd.h> |
| #include <ipxe/eisa.h> |
| |
| FILE_LICENCE ( GPL2_OR_LATER ); |
| |
| static void eisabus_remove ( struct root_device *rootdev ); |
| |
| /** |
| * Reset and enable/disable an EISA device |
| * |
| * @v eisa EISA device |
| * @v enabled 1=enable, 0=disable |
| */ |
| void eisa_device_enabled ( struct eisa_device *eisa, int enabled ) { |
| /* Set reset line high for 1000 µs. Spec says 500 µs, but |
| * this doesn't work for all cards, so we are conservative. |
| */ |
| outb ( EISA_CMD_RESET, eisa->ioaddr + EISA_GLOBAL_CONFIG ); |
| udelay ( 1000 ); /* Must wait 800 */ |
| |
| /* Set reset low and write a 1 to ENABLE. Delay again, in |
| * case the card takes a while to wake up. |
| */ |
| outb ( enabled ? EISA_CMD_ENABLE : 0, |
| eisa->ioaddr + EISA_GLOBAL_CONFIG ); |
| udelay ( 1000 ); /* Must wait 800 */ |
| |
| DBG ( "EISA %s device %02x\n", ( enabled ? "enabled" : "disabled" ), |
| eisa->slot ); |
| } |
| |
| /** |
| * Probe an EISA device |
| * |
| * @v eisa EISA device |
| * @ret rc Return status code |
| * |
| * Searches for a driver for the EISA device. If a driver is found, |
| * its probe() routine is called. |
| */ |
| static int eisa_probe ( struct eisa_device *eisa ) { |
| struct eisa_driver *driver; |
| struct eisa_device_id *id; |
| unsigned int i; |
| int rc; |
| |
| DBG ( "Adding EISA device %02x (%04x:%04x (\"%s\") io %x)\n", |
| eisa->slot, eisa->vendor_id, eisa->prod_id, |
| isa_id_string ( eisa->vendor_id, eisa->prod_id ), eisa->ioaddr ); |
| |
| for_each_table_entry ( driver, EISA_DRIVERS ) { |
| for ( i = 0 ; i < driver->id_count ; i++ ) { |
| id = &driver->ids[i]; |
| if ( id->vendor_id != eisa->vendor_id ) |
| continue; |
| if ( ISA_PROD_ID ( id->prod_id ) != |
| ISA_PROD_ID ( eisa->prod_id ) ) |
| continue; |
| eisa->driver = driver; |
| eisa->dev.driver_name = id->name; |
| DBG ( "...using driver %s\n", eisa->dev.driver_name ); |
| if ( ( rc = driver->probe ( eisa, id ) ) != 0 ) { |
| DBG ( "......probe failed\n" ); |
| continue; |
| } |
| return 0; |
| } |
| } |
| |
| DBG ( "...no driver found\n" ); |
| return -ENOTTY; |
| } |
| |
| /** |
| * Remove an EISA device |
| * |
| * @v eisa EISA device |
| */ |
| static void eisa_remove ( struct eisa_device *eisa ) { |
| eisa->driver->remove ( eisa ); |
| DBG ( "Removed EISA device %02x\n", eisa->slot ); |
| } |
| |
| /** |
| * Probe EISA root bus |
| * |
| * @v rootdev EISA bus root device |
| * |
| * Scans the EISA bus for devices and registers all devices it can |
| * find. |
| */ |
| static int eisabus_probe ( struct root_device *rootdev ) { |
| struct eisa_device *eisa = NULL; |
| unsigned int slot; |
| int rc; |
| |
| for ( slot = EISA_MIN_SLOT ; slot <= EISA_MAX_SLOT ; slot++ ) { |
| /* Allocate struct eisa_device */ |
| if ( ! eisa ) |
| eisa = malloc ( sizeof ( *eisa ) ); |
| if ( ! eisa ) { |
| rc = -ENOMEM; |
| goto err; |
| } |
| memset ( eisa, 0, sizeof ( *eisa ) ); |
| eisa->slot = slot; |
| eisa->ioaddr = EISA_SLOT_BASE ( eisa->slot ); |
| |
| /* Test for board present */ |
| outb ( 0xff, eisa->ioaddr + EISA_VENDOR_ID ); |
| eisa->vendor_id = |
| le16_to_cpu ( inw ( eisa->ioaddr + EISA_VENDOR_ID ) ); |
| eisa->prod_id = |
| le16_to_cpu ( inw ( eisa->ioaddr + EISA_PROD_ID ) ); |
| if ( eisa->vendor_id & 0x80 ) { |
| /* No board present */ |
| continue; |
| } |
| |
| /* Add to device hierarchy */ |
| snprintf ( eisa->dev.name, sizeof ( eisa->dev.name ), |
| "EISA%02x", slot ); |
| eisa->dev.desc.bus_type = BUS_TYPE_EISA; |
| eisa->dev.desc.vendor = eisa->vendor_id; |
| eisa->dev.desc.device = eisa->prod_id; |
| eisa->dev.parent = &rootdev->dev; |
| list_add ( &eisa->dev.siblings, &rootdev->dev.children ); |
| INIT_LIST_HEAD ( &eisa->dev.children ); |
| |
| /* Look for a driver */ |
| if ( eisa_probe ( eisa ) == 0 ) { |
| /* eisadev registered, we can drop our ref */ |
| eisa = NULL; |
| } else { |
| /* Not registered; re-use struct */ |
| list_del ( &eisa->dev.siblings ); |
| } |
| } |
| |
| free ( eisa ); |
| return 0; |
| |
| err: |
| free ( eisa ); |
| eisabus_remove ( rootdev ); |
| return rc; |
| } |
| |
| /** |
| * Remove EISA root bus |
| * |
| * @v rootdev EISA bus root device |
| */ |
| static void eisabus_remove ( struct root_device *rootdev ) { |
| struct eisa_device *eisa; |
| struct eisa_device *tmp; |
| |
| list_for_each_entry_safe ( eisa, tmp, &rootdev->dev.children, |
| dev.siblings ) { |
| eisa_remove ( eisa ); |
| list_del ( &eisa->dev.siblings ); |
| free ( eisa ); |
| } |
| } |
| |
| /** EISA bus root device driver */ |
| static struct root_driver eisa_root_driver = { |
| .probe = eisabus_probe, |
| .remove = eisabus_remove, |
| }; |
| |
| /** EISA bus root device */ |
| struct root_device eisa_root_device __root_device = { |
| .dev = { .name = "EISA" }, |
| .driver = &eisa_root_driver, |
| }; |