| /* | |
| * Copyright (c) 2008 Stefan Hajnoczi <stefanha@gmail.com> | |
| * Copyright (c) 2008 Pantelis Koukousoulas <pktoss@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301, USA. | |
| * | |
| * This driver is a port of the b44 linux driver version 1.01 | |
| * | |
| * Copyright (c) 2002 David S. Miller <davem@redhat.com> | |
| * Copyright (c) Pekka Pietikainen <pp@ee.oulu.fi> | |
| * Copyright (C) 2006 Broadcom Corporation. | |
| * | |
| * Some ssb bits copied from version 2.0 of the b44 driver | |
| * Copyright (c) Michael Buesch | |
| * | |
| * Copyright (c) a lot of people too. Please respect their work. | |
| */ | |
| FILE_LICENCE ( GPL2_OR_LATER ); | |
| #include <string.h> | |
| #include <errno.h> | |
| #include <assert.h> | |
| #include <stdio.h> | |
| #include <unistd.h> | |
| #include <byteswap.h> | |
| #include <ipxe/io.h> | |
| #include <mii.h> | |
| #include <ipxe/iobuf.h> | |
| #include <ipxe/malloc.h> | |
| #include <ipxe/pci.h> | |
| #include <ipxe/netdevice.h> | |
| #include <ipxe/ethernet.h> | |
| #include <ipxe/if_ether.h> | |
| #include "b44.h" | |
| static inline int ring_next(int index) | |
| { | |
| /* B44_RING_SIZE is a power of 2 :) */ | |
| return (index + 1) & (B44_RING_SIZE - 1); | |
| } | |
| /* Memory-mapped I/O wrappers */ | |
| static inline u32 br32(const struct b44_private *bp, u32 reg) | |
| { | |
| return readl(bp->regs + reg); | |
| } | |
| static inline void bw32(const struct b44_private *bp, u32 reg, u32 val) | |
| { | |
| writel(val, bp->regs + reg); | |
| } | |
| static inline void bflush(const struct b44_private *bp, u32 reg, u32 timeout) | |
| { | |
| readl(bp->regs + reg); | |
| udelay(timeout); | |
| } | |
| #define VIRT_TO_B44(addr) ( virt_to_bus(addr) + SB_PCI_DMA ) | |
| /** | |
| * Check if card can access address | |
| * | |
| * @v address Virtual address | |
| * @v address_ok Card can access address | |
| */ | |
| static inline __attribute__ (( always_inline )) int | |
| b44_address_ok ( void *address ) { | |
| /* Card can address anything with a 30-bit address */ | |
| if ( ( virt_to_bus ( address ) & ~B44_30BIT_DMA_MASK ) == 0 ) | |
| return 1; | |
| return 0; | |
| } | |
| /** | |
| * Ring cells waiting to be processed are between 'tx_cur' and 'pending' | |
| * indexes in the ring. | |
| */ | |
| static u32 pending_tx_index(struct b44_private *bp) | |
| { | |
| u32 pending = br32(bp, B44_DMATX_STAT); | |
| pending &= DMATX_STAT_CDMASK; | |
| pending /= sizeof(struct dma_desc); | |
| return pending & (B44_RING_SIZE - 1); | |
| } | |
| /** | |
| * Ring cells waiting to be processed are between 'rx_cur' and 'pending' | |
| * indexes in the ring. | |
| */ | |
| static u32 pending_rx_index(struct b44_private *bp) | |
| { | |
| u32 pending = br32(bp, B44_DMARX_STAT); | |
| pending &= DMARX_STAT_CDMASK; | |
| pending /= sizeof(struct dma_desc); | |
| return pending & (B44_RING_SIZE - 1); | |
| } | |
| /** | |
| * Wait until the given bit is set/cleared. | |
| */ | |
| static int b44_wait_bit(struct b44_private *bp, unsigned long reg, u32 bit, | |
| unsigned long timeout, const int clear) | |
| { | |
| unsigned long i; | |
| for (i = 0; i < timeout; i++) { | |
| u32 val = br32(bp, reg); | |
| if (clear && !(val & bit)) | |
| break; | |
| if (!clear && (val & bit)) | |
| break; | |
| udelay(10); | |
| } | |
| if (i == timeout) { | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Sonics Silicon Backplane support. SSB is a mini-bus interconnecting | |
| * so-called IP Cores. One of those cores implements the Fast Ethernet | |
| * functionality and another one the PCI engine. | |
| * | |
| * You need to switch to the core you want to talk to before actually | |
| * sending commands. | |
| * | |
| * See: http://bcm-v4.sipsolutions.net/Backplane for (reverse-engineered) | |
| * specs. | |
| */ | |
| static inline u32 ssb_get_core_rev(struct b44_private *bp) | |
| { | |
| return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); | |
| } | |
| static inline int ssb_is_core_up(struct b44_private *bp) | |
| { | |
| return ((br32(bp, B44_SBTMSLOW) & (SSB_CORE_DOWN | SBTMSLOW_CLOCK)) | |
| == SBTMSLOW_CLOCK); | |
| } | |
| static u32 ssb_pci_setup(struct b44_private *bp, u32 cores) | |
| { | |
| u32 bar_orig, pci_rev, val; | |
| pci_read_config_dword(bp->pci, SSB_BAR0_WIN, &bar_orig); | |
| pci_write_config_dword(bp->pci, SSB_BAR0_WIN, | |
| BCM4400_PCI_CORE_ADDR); | |
| pci_rev = ssb_get_core_rev(bp); | |
| val = br32(bp, B44_SBINTVEC); | |
| val |= cores; | |
| bw32(bp, B44_SBINTVEC, val); | |
| val = br32(bp, SSB_PCI_TRANS_2); | |
| val |= SSB_PCI_PREF | SSB_PCI_BURST; | |
| bw32(bp, SSB_PCI_TRANS_2, val); | |
| pci_write_config_dword(bp->pci, SSB_BAR0_WIN, bar_orig); | |
| return pci_rev; | |
| } | |
| static void ssb_core_disable(struct b44_private *bp) | |
| { | |
| if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) | |
| return; | |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); | |
| b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); | |
| b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); | |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | | |
| SSB_CORE_DOWN)); | |
| bflush(bp, B44_SBTMSLOW, 1); | |
| bw32(bp, B44_SBTMSLOW, SSB_CORE_DOWN); | |
| bflush(bp, B44_SBTMSLOW, 1); | |
| } | |
| static void ssb_core_reset(struct b44_private *bp) | |
| { | |
| u32 val; | |
| const u32 mask = (SBTMSLOW_CLOCK | SBTMSLOW_FGC | SBTMSLOW_RESET); | |
| ssb_core_disable(bp); | |
| bw32(bp, B44_SBTMSLOW, mask); | |
| bflush(bp, B44_SBTMSLOW, 1); | |
| /* Clear SERR if set, this is a hw bug workaround. */ | |
| if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) | |
| bw32(bp, B44_SBTMSHIGH, 0); | |
| val = br32(bp, B44_SBIMSTATE); | |
| if (val & (SBIMSTATE_BAD)) { | |
| bw32(bp, B44_SBIMSTATE, val & ~SBIMSTATE_BAD); | |
| } | |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); | |
| bflush(bp, B44_SBTMSLOW, 1); | |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); | |
| bflush(bp, B44_SBTMSLOW, 1); | |
| } | |
| /* | |
| * Driver helper functions | |
| */ | |
| /* | |
| * Chip reset provides power to the b44 MAC & PCI cores, which | |
| * is necessary for MAC register access. We only do a partial | |
| * reset in case of transmit/receive errors (ISTAT_ERRORS) to | |
| * avoid the chip being hung for an unnecessary long time in | |
| * this case. | |
| * | |
| * Called-by: b44_close, b44_halt, b44_inithw(b44_open), b44_probe | |
| */ | |
| static void b44_chip_reset(struct b44_private *bp, int reset_kind) | |
| { | |
| if (ssb_is_core_up(bp)) { | |
| bw32(bp, B44_RCV_LAZY, 0); | |
| bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); | |
| b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1); | |
| bw32(bp, B44_DMATX_CTRL, 0); | |
| bp->tx_dirty = bp->tx_cur = 0; | |
| if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) | |
| b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, | |
| 100, 0); | |
| bw32(bp, B44_DMARX_CTRL, 0); | |
| bp->rx_cur = 0; | |
| } else { | |
| ssb_pci_setup(bp, SBINTVEC_ENET0); | |
| } | |
| ssb_core_reset(bp); | |
| /* Don't enable PHY if we are only doing a partial reset. */ | |
| if (reset_kind == B44_CHIP_RESET_PARTIAL) | |
| return; | |
| /* Make PHY accessible. */ | |
| bw32(bp, B44_MDIO_CTRL, | |
| (MDIO_CTRL_PREAMBLE | (0x0d & MDIO_CTRL_MAXF_MASK))); | |
| bflush(bp, B44_MDIO_CTRL, 1); | |
| /* Enable internal or external PHY */ | |
| if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { | |
| bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); | |
| bflush(bp, B44_ENET_CTRL, 1); | |
| } else { | |
| u32 val = br32(bp, B44_DEVCTRL); | |
| if (val & DEVCTRL_EPR) { | |
| bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); | |
| bflush(bp, B44_DEVCTRL, 100); | |
| } | |
| } | |
| } | |
| /** | |
| * called by b44_poll in the error path | |
| */ | |
| static void b44_halt(struct b44_private *bp) | |
| { | |
| /* disable ints */ | |
| bw32(bp, B44_IMASK, 0); | |
| bflush(bp, B44_IMASK, 1); | |
| DBG("b44: powering down PHY\n"); | |
| bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN); | |
| /* | |
| * Now reset the chip, but without enabling | |
| * the MAC&PHY part of it. | |
| * This has to be done _after_ we shut down the PHY | |
| */ | |
| b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL); | |
| } | |
| /* | |
| * Called at device open time to get the chip ready for | |
| * packet processing. | |
| * | |
| * Called-by: b44_open | |
| */ | |
| static void b44_init_hw(struct b44_private *bp, int reset_kind) | |
| { | |
| u32 val; | |
| #define CTRL_MASK (DMARX_CTRL_ENABLE | (RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)) | |
| b44_chip_reset(bp, B44_CHIP_RESET_FULL); | |
| if (reset_kind == B44_FULL_RESET) { | |
| b44_phy_reset(bp); | |
| } | |
| /* Enable CRC32, set proper LED modes and power on PHY */ | |
| bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); | |
| bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); | |
| /* This sets the MAC address too. */ | |
| b44_set_rx_mode(bp->netdev); | |
| /* MTU + eth header + possible VLAN tag + struct rx_header */ | |
| bw32(bp, B44_RXMAXLEN, B44_MAX_MTU + ETH_HLEN + 8 + RX_HEADER_LEN); | |
| bw32(bp, B44_TXMAXLEN, B44_MAX_MTU + ETH_HLEN + 8 + RX_HEADER_LEN); | |
| bw32(bp, B44_TX_HIWMARK, TX_HIWMARK_DEFLT); | |
| if (reset_kind == B44_PARTIAL_RESET) { | |
| bw32(bp, B44_DMARX_CTRL, CTRL_MASK); | |
| } else { | |
| bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); | |
| bw32(bp, B44_DMATX_ADDR, VIRT_TO_B44(bp->tx)); | |
| bw32(bp, B44_DMARX_CTRL, CTRL_MASK); | |
| bw32(bp, B44_DMARX_ADDR, VIRT_TO_B44(bp->rx)); | |
| bw32(bp, B44_DMARX_PTR, B44_RX_RING_LEN_BYTES); | |
| bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); | |
| } | |
| val = br32(bp, B44_ENET_CTRL); | |
| bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); | |
| #undef CTRL_MASK | |
| } | |
| /*** Management of ring descriptors ***/ | |
| static void b44_populate_rx_descriptor(struct b44_private *bp, u32 idx) | |
| { | |
| struct rx_header *rh; | |
| u32 ctrl, addr; | |
| rh = bp->rx_iobuf[idx]->data; | |
| rh->len = 0; | |
| rh->flags = 0; | |
| ctrl = DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET); | |
| if (idx == B44_RING_LAST) { | |
| ctrl |= DESC_CTRL_EOT; | |
| } | |
| addr = VIRT_TO_B44(bp->rx_iobuf[idx]->data); | |
| bp->rx[idx].ctrl = cpu_to_le32(ctrl); | |
| bp->rx[idx].addr = cpu_to_le32(addr); | |
| bw32(bp, B44_DMARX_PTR, idx * sizeof(struct dma_desc)); | |
| } | |
| /* | |
| * Refill RX ring descriptors with buffers. This is needed | |
| * because during rx we are passing ownership of descriptor | |
| * buffers to the network stack. | |
| */ | |
| static void b44_rx_refill(struct b44_private *bp, u32 pending) | |
| { | |
| struct io_buffer *iobuf; | |
| u32 i; | |
| // skip pending | |
| for (i = pending + 1; i != bp->rx_cur; i = ring_next(i)) { | |
| if (bp->rx_iobuf[i] != NULL) | |
| continue; | |
| iobuf = alloc_iob(RX_PKT_BUF_SZ); | |
| if (!iobuf) { | |
| DBG("Refill rx ring failed!!\n"); | |
| break; | |
| } | |
| if (!b44_address_ok(iobuf->data)) { | |
| DBG("Refill rx ring bad address!!\n"); | |
| free_iob(iobuf); | |
| break; | |
| } | |
| bp->rx_iobuf[i] = iobuf; | |
| b44_populate_rx_descriptor(bp, i); | |
| } | |
| } | |
| static void b44_free_rx_ring(struct b44_private *bp) | |
| { | |
| u32 i; | |
| if (bp->rx) { | |
| for (i = 0; i < B44_RING_SIZE; i++) { | |
| free_iob(bp->rx_iobuf[i]); | |
| bp->rx_iobuf[i] = NULL; | |
| } | |
| free_phys(bp->rx, B44_RX_RING_LEN_BYTES); | |
| bp->rx = NULL; | |
| } | |
| } | |
| static int b44_init_rx_ring(struct b44_private *bp) | |
| { | |
| b44_free_rx_ring(bp); | |
| bp->rx = malloc_phys(B44_RX_RING_LEN_BYTES, B44_DMA_ALIGNMENT); | |
| if (!bp->rx) | |
| return -ENOMEM; | |
| if (!b44_address_ok(bp->rx)) { | |
| free_phys(bp->rx, B44_RX_RING_LEN_BYTES); | |
| return -ENOTSUP; | |
| } | |
| memset(bp->rx_iobuf, 0, sizeof(bp->rx_iobuf)); | |
| bp->rx_iobuf[0] = alloc_iob(RX_PKT_BUF_SZ); | |
| b44_populate_rx_descriptor(bp, 0); | |
| b44_rx_refill(bp, 0); | |
| DBG("Init RX rings: rx=0x%08lx\n", VIRT_TO_B44(bp->rx)); | |
| return 0; | |
| } | |
| static void b44_free_tx_ring(struct b44_private *bp) | |
| { | |
| if (bp->tx) { | |
| free_phys(bp->tx, B44_TX_RING_LEN_BYTES); | |
| bp->tx = NULL; | |
| } | |
| } | |
| static int b44_init_tx_ring(struct b44_private *bp) | |
| { | |
| b44_free_tx_ring(bp); | |
| bp->tx = malloc_phys(B44_TX_RING_LEN_BYTES, B44_DMA_ALIGNMENT); | |
| if (!bp->tx) | |
| return -ENOMEM; | |
| if (!b44_address_ok(bp->tx)) { | |
| free_phys(bp->tx, B44_TX_RING_LEN_BYTES); | |
| return -ENOTSUP; | |
| } | |
| memset(bp->tx, 0, B44_TX_RING_LEN_BYTES); | |
| memset(bp->tx_iobuf, 0, sizeof(bp->tx_iobuf)); | |
| DBG("Init TX rings: tx=0x%08lx\n", VIRT_TO_B44(bp->tx)); | |
| return 0; | |
| } | |
| /*** Interaction with the PHY ***/ | |
| static int b44_phy_read(struct b44_private *bp, int reg, u32 * val) | |
| { | |
| int err; | |
| u32 arg1 = (MDIO_OP_READ << MDIO_DATA_OP_SHIFT); | |
| u32 arg2 = (bp->phy_addr << MDIO_DATA_PMD_SHIFT); | |
| u32 arg3 = (reg << MDIO_DATA_RA_SHIFT); | |
| u32 arg4 = (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT); | |
| u32 argv = arg1 | arg2 | arg3 | arg4; | |
| bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); | |
| bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | argv)); | |
| err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); | |
| *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; | |
| return err; | |
| } | |
| static int b44_phy_write(struct b44_private *bp, int reg, u32 val) | |
| { | |
| u32 arg1 = (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT); | |
| u32 arg2 = (bp->phy_addr << MDIO_DATA_PMD_SHIFT); | |
| u32 arg3 = (reg << MDIO_DATA_RA_SHIFT); | |
| u32 arg4 = (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT); | |
| u32 arg5 = (val & MDIO_DATA_DATA); | |
| u32 argv = arg1 | arg2 | arg3 | arg4 | arg5; | |
| bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); | |
| bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | argv)); | |
| return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); | |
| } | |
| static int b44_phy_reset(struct b44_private *bp) | |
| { | |
| u32 val; | |
| int err; | |
| err = b44_phy_write(bp, MII_BMCR, BMCR_RESET); | |
| if (err) | |
| return err; | |
| udelay(100); | |
| err = b44_phy_read(bp, MII_BMCR, &val); | |
| if (!err) { | |
| if (val & BMCR_RESET) { | |
| return -ENODEV; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * The BCM44xx CAM (Content Addressable Memory) stores the MAC | |
| * and PHY address. | |
| */ | |
| static void b44_cam_write(struct b44_private *bp, unsigned char *data, | |
| int index) | |
| { | |
| u32 val; | |
| val = ((u32) data[2]) << 24; | |
| val |= ((u32) data[3]) << 16; | |
| val |= ((u32) data[4]) << 8; | |
| val |= ((u32) data[5]) << 0; | |
| bw32(bp, B44_CAM_DATA_LO, val); | |
| val = (CAM_DATA_HI_VALID | | |
| (((u32) data[0]) << 8) | (((u32) data[1]) << 0)); | |
| bw32(bp, B44_CAM_DATA_HI, val); | |
| val = CAM_CTRL_WRITE | (index << CAM_CTRL_INDEX_SHIFT); | |
| bw32(bp, B44_CAM_CTRL, val); | |
| b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); | |
| } | |
| static void b44_set_mac_addr(struct b44_private *bp) | |
| { | |
| u32 val; | |
| bw32(bp, B44_CAM_CTRL, 0); | |
| b44_cam_write(bp, bp->netdev->ll_addr, 0); | |
| val = br32(bp, B44_CAM_CTRL); | |
| bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); | |
| } | |
| /* Read 128-bytes of EEPROM. */ | |
| static void b44_read_eeprom(struct b44_private *bp, u8 * data) | |
| { | |
| long i; | |
| u16 *ptr = (u16 *) data; | |
| for (i = 0; i < 128; i += 2) | |
| ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i)); | |
| } | |
| static void b44_load_mac_and_phy_addr(struct b44_private *bp) | |
| { | |
| u8 eeprom[128]; | |
| /* Load MAC address, note byteswapping */ | |
| b44_read_eeprom(bp, &eeprom[0]); | |
| bp->netdev->hw_addr[0] = eeprom[79]; | |
| bp->netdev->hw_addr[1] = eeprom[78]; | |
| bp->netdev->hw_addr[2] = eeprom[81]; | |
| bp->netdev->hw_addr[3] = eeprom[80]; | |
| bp->netdev->hw_addr[4] = eeprom[83]; | |
| bp->netdev->hw_addr[5] = eeprom[82]; | |
| /* Load PHY address */ | |
| bp->phy_addr = eeprom[90] & 0x1f; | |
| } | |
| static void b44_set_rx_mode(struct net_device *netdev) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| unsigned char zero[6] = { 0, 0, 0, 0, 0, 0 }; | |
| u32 val; | |
| int i; | |
| val = br32(bp, B44_RXCONFIG); | |
| val &= ~RXCONFIG_PROMISC; | |
| val |= RXCONFIG_ALLMULTI; | |
| b44_set_mac_addr(bp); | |
| for (i = 1; i < 64; i++) | |
| b44_cam_write(bp, zero, i); | |
| bw32(bp, B44_RXCONFIG, val); | |
| val = br32(bp, B44_CAM_CTRL); | |
| bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); | |
| } | |
| /*** Implementation of iPXE driver callbacks ***/ | |
| /** | |
| * Probe device | |
| * | |
| * @v pci PCI device | |
| * @v id Matching entry in ID table | |
| * @ret rc Return status code | |
| */ | |
| static int b44_probe(struct pci_device *pci) | |
| { | |
| struct net_device *netdev; | |
| struct b44_private *bp; | |
| int rc; | |
| /* Set up netdev */ | |
| netdev = alloc_etherdev(sizeof(*bp)); | |
| if (!netdev) | |
| return -ENOMEM; | |
| netdev_init(netdev, &b44_operations); | |
| pci_set_drvdata(pci, netdev); | |
| netdev->dev = &pci->dev; | |
| /* Set up private data */ | |
| bp = netdev->priv; | |
| memset(bp, 0, sizeof(*bp)); | |
| bp->netdev = netdev; | |
| bp->pci = pci; | |
| /* Map device registers */ | |
| bp->regs = pci_ioremap(pci, pci->membase, B44_REGS_SIZE); | |
| if (!bp->regs) { | |
| netdev_put(netdev); | |
| return -ENOMEM; | |
| } | |
| /* Enable PCI bus mastering */ | |
| adjust_pci_device(pci); | |
| b44_load_mac_and_phy_addr(bp); | |
| rc = register_netdev(netdev); | |
| if (rc != 0) { | |
| iounmap(bp->regs); | |
| netdev_put(netdev); | |
| return rc; | |
| } | |
| /* Link management currently not implemented */ | |
| netdev_link_up(netdev); | |
| b44_chip_reset(bp, B44_CHIP_RESET_FULL); | |
| DBG("b44 %s (%04x:%04x) regs=%p MAC=%s\n", pci->id->name, | |
| pci->id->vendor, pci->id->device, bp->regs, | |
| eth_ntoa(netdev->ll_addr)); | |
| return 0; | |
| } | |
| /** | |
| * Remove device | |
| * | |
| * @v pci PCI device | |
| */ | |
| static void b44_remove(struct pci_device *pci) | |
| { | |
| struct net_device *netdev = pci_get_drvdata(pci); | |
| struct b44_private *bp = netdev->priv; | |
| ssb_core_disable(bp); | |
| unregister_netdev(netdev); | |
| iounmap(bp->regs); | |
| netdev_nullify(netdev); | |
| netdev_put(netdev); | |
| } | |
| /** Enable or disable interrupts | |
| * | |
| * @v netdev Network device | |
| * @v enable Interrupts should be enabled | |
| */ | |
| static void b44_irq(struct net_device *netdev, int enable) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| /* Interrupt mask specifies which events generate interrupts */ | |
| bw32(bp, B44_IMASK, enable ? IMASK_DEF : IMASK_DISABLE); | |
| } | |
| /** Open network device | |
| * | |
| * @v netdev Network device | |
| * @ret rc Return status code | |
| */ | |
| static int b44_open(struct net_device *netdev) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| int rc; | |
| rc = b44_init_tx_ring(bp); | |
| if (rc != 0) | |
| return rc; | |
| rc = b44_init_rx_ring(bp); | |
| if (rc != 0) | |
| return rc; | |
| b44_init_hw(bp, B44_FULL_RESET); | |
| /* Disable interrupts */ | |
| b44_irq(netdev, 0); | |
| return 0; | |
| } | |
| /** Close network device | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void b44_close(struct net_device *netdev) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| b44_chip_reset(bp, B44_FULL_RESET); | |
| b44_free_tx_ring(bp); | |
| b44_free_rx_ring(bp); | |
| } | |
| /** Transmit packet | |
| * | |
| * @v netdev Network device | |
| * @v iobuf I/O buffer | |
| * @ret rc Return status code | |
| */ | |
| static int b44_transmit(struct net_device *netdev, struct io_buffer *iobuf) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| u32 cur = bp->tx_cur; | |
| u32 ctrl; | |
| /* Check for TX ring overflow */ | |
| if (bp->tx[cur].ctrl) { | |
| DBG("tx overflow\n"); | |
| return -ENOBUFS; | |
| } | |
| /* Check for addressability */ | |
| if (!b44_address_ok(iobuf->data)) | |
| return -ENOTSUP; | |
| /* Will call netdev_tx_complete() on the iobuf later */ | |
| bp->tx_iobuf[cur] = iobuf; | |
| /* Set up TX descriptor */ | |
| ctrl = (iob_len(iobuf) & DESC_CTRL_LEN) | | |
| DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF; | |
| if (cur == B44_RING_LAST) | |
| ctrl |= DESC_CTRL_EOT; | |
| bp->tx[cur].ctrl = cpu_to_le32(ctrl); | |
| bp->tx[cur].addr = cpu_to_le32(VIRT_TO_B44(iobuf->data)); | |
| /* Update next available descriptor index */ | |
| cur = ring_next(cur); | |
| bp->tx_cur = cur; | |
| wmb(); | |
| /* Tell card that a new TX descriptor is ready */ | |
| bw32(bp, B44_DMATX_PTR, cur * sizeof(struct dma_desc)); | |
| return 0; | |
| } | |
| /** Recycles sent TX descriptors and notifies network stack | |
| * | |
| * @v bp Driver state | |
| */ | |
| static void b44_tx_complete(struct b44_private *bp) | |
| { | |
| u32 cur, i; | |
| cur = pending_tx_index(bp); | |
| for (i = bp->tx_dirty; i != cur; i = ring_next(i)) { | |
| /* Free finished frame */ | |
| netdev_tx_complete(bp->netdev, bp->tx_iobuf[i]); | |
| bp->tx_iobuf[i] = NULL; | |
| /* Clear TX descriptor */ | |
| bp->tx[i].ctrl = 0; | |
| bp->tx[i].addr = 0; | |
| } | |
| bp->tx_dirty = cur; | |
| } | |
| static void b44_process_rx_packets(struct b44_private *bp) | |
| { | |
| struct io_buffer *iob; /* received data */ | |
| struct rx_header *rh; | |
| u32 pending, i; | |
| u16 len; | |
| pending = pending_rx_index(bp); | |
| for (i = bp->rx_cur; i != pending; i = ring_next(i)) { | |
| iob = bp->rx_iobuf[i]; | |
| if (iob == NULL) | |
| break; | |
| rh = iob->data; | |
| len = le16_to_cpu(rh->len); | |
| /* | |
| * Guard against incompletely written RX descriptors. | |
| * Without this, things can get really slow! | |
| */ | |
| if (len == 0) | |
| break; | |
| /* Discard CRC that is generated by the card */ | |
| len -= 4; | |
| /* Check for invalid packets and errors */ | |
| if (len > RX_PKT_BUF_SZ - RX_PKT_OFFSET || | |
| (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) { | |
| DBG("rx error len=%d flags=%04x\n", len, | |
| cpu_to_le16(rh->flags)); | |
| rh->len = 0; | |
| rh->flags = 0; | |
| netdev_rx_err(bp->netdev, iob, -EINVAL); | |
| continue; | |
| } | |
| /* Clear RX descriptor */ | |
| rh->len = 0; | |
| rh->flags = 0; | |
| bp->rx_iobuf[i] = NULL; | |
| /* Hand off the IO buffer to the network stack */ | |
| iob_reserve(iob, RX_PKT_OFFSET); | |
| iob_put(iob, len); | |
| netdev_rx(bp->netdev, iob); | |
| } | |
| bp->rx_cur = i; | |
| b44_rx_refill(bp, pending_rx_index(bp)); | |
| } | |
| /** Poll for completed and received packets | |
| * | |
| * @v netdev Network device | |
| */ | |
| static void b44_poll(struct net_device *netdev) | |
| { | |
| struct b44_private *bp = netdev->priv; | |
| u32 istat; | |
| /* Interrupt status */ | |
| istat = br32(bp, B44_ISTAT); | |
| istat &= IMASK_DEF; /* only the events we care about */ | |
| if (!istat) | |
| return; | |
| if (istat & ISTAT_TX) | |
| b44_tx_complete(bp); | |
| if (istat & ISTAT_RX) | |
| b44_process_rx_packets(bp); | |
| if (istat & ISTAT_ERRORS) { | |
| DBG("b44 error istat=0x%08x\n", istat); | |
| /* Reset B44 core partially to avoid long waits */ | |
| b44_irq(bp->netdev, 0); | |
| b44_halt(bp); | |
| b44_init_tx_ring(bp); | |
| b44_init_rx_ring(bp); | |
| b44_init_hw(bp, B44_FULL_RESET_SKIP_PHY); | |
| } | |
| /* Acknowledge interrupt */ | |
| bw32(bp, B44_ISTAT, 0); | |
| bflush(bp, B44_ISTAT, 1); | |
| } | |
| static struct net_device_operations b44_operations = { | |
| .open = b44_open, | |
| .close = b44_close, | |
| .transmit = b44_transmit, | |
| .poll = b44_poll, | |
| .irq = b44_irq, | |
| }; | |
| static struct pci_device_id b44_nics[] = { | |
| PCI_ROM(0x14e4, 0x170c, "BCM4401-B0", "BCM4401-B0", 0), | |
| PCI_ROM(0x14e4, 0x4401, "BCM4401", "BCM4401", 0), | |
| PCI_ROM(0x14e4, 0x4402, "BCM4401-B1", "BCM4401-B1", 0), | |
| }; | |
| struct pci_driver b44_driver __pci_driver = { | |
| .ids = b44_nics, | |
| .id_count = sizeof b44_nics / sizeof b44_nics[0], | |
| .probe = b44_probe, | |
| .remove = b44_remove, | |
| }; |