| /* |
| * Copyright (C) 2006 Michael Brown <mbrown@fensystems.co.uk>. |
| * |
| * Based in part on pci.c from Etherboot 5.4, by Ken Yap and David |
| * Munro, in turn based on the Linux kernel's PCI implementation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <gpxe/tables.h> |
| #include <gpxe/device.h> |
| #include <gpxe/pci.h> |
| |
| /** @file |
| * |
| * PCI bus |
| * |
| */ |
| |
| static void pcibus_remove ( struct root_device *rootdev ); |
| |
| /** |
| * Read PCI BAR |
| * |
| * @v pci PCI device |
| * @v reg PCI register number |
| * @ret bar Base address register |
| * |
| * Reads the specified PCI base address register, including the flags |
| * portion. 64-bit BARs will be handled automatically. If the value |
| * of the 64-bit BAR exceeds the size of an unsigned long (i.e. if the |
| * high dword is non-zero on a 32-bit platform), then the value |
| * returned will be zero plus the flags for a 64-bit BAR. Unreachable |
| * 64-bit BARs are therefore returned as uninitialised 64-bit BARs. |
| */ |
| static unsigned long pci_bar ( struct pci_device *pci, unsigned int reg ) { |
| uint32_t low; |
| uint32_t high; |
| |
| pci_read_config_dword ( pci, reg, &low ); |
| if ( ( low & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK) ) |
| == (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64) ){ |
| pci_read_config_dword ( pci, reg + 4, &high ); |
| if ( high ) { |
| if ( sizeof ( unsigned long ) > sizeof ( uint32_t ) ) { |
| return ( ( ( uint64_t ) high << 32 ) | low ); |
| } else { |
| DBG ( "Unhandled 64-bit BAR %08x%08x\n", |
| high, low ); |
| return PCI_BASE_ADDRESS_MEM_TYPE_64; |
| } |
| } |
| } |
| return low; |
| } |
| |
| /** |
| * Find the start of a PCI BAR |
| * |
| * @v pci PCI device |
| * @v reg PCI register number |
| * @ret start BAR start address |
| * |
| * Reads the specified PCI base address register, and returns the |
| * address portion of the BAR (i.e. without the flags). |
| * |
| * If the address exceeds the size of an unsigned long (i.e. if a |
| * 64-bit BAR has a non-zero high dword on a 32-bit machine), the |
| * return value will be zero. |
| */ |
| unsigned long pci_bar_start ( struct pci_device *pci, unsigned int reg ) { |
| unsigned long bar; |
| |
| bar = pci_bar ( pci, reg ); |
| if ( (bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY ){ |
| return ( bar & PCI_BASE_ADDRESS_MEM_MASK ); |
| } else { |
| return ( bar & PCI_BASE_ADDRESS_IO_MASK ); |
| } |
| } |
| |
| /** |
| * Read membase and ioaddr for a PCI device |
| * |
| * @v pci PCI device |
| * |
| * This scans through all PCI BARs on the specified device. The first |
| * valid memory BAR is recorded as pci_device::membase, and the first |
| * valid IO BAR is recorded as pci_device::ioaddr. |
| * |
| * 64-bit BARs are handled automatically. On a 32-bit platform, if a |
| * 64-bit BAR has a non-zero high dword, it will be regarded as |
| * invalid. |
| */ |
| static void pci_read_bases ( struct pci_device *pci ) { |
| unsigned long bar; |
| int reg; |
| |
| for ( reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4 ) { |
| bar = pci_bar ( pci, reg ); |
| if ( bar & PCI_BASE_ADDRESS_SPACE_IO ) { |
| if ( ! pci->ioaddr ) |
| pci->ioaddr = |
| ( bar & PCI_BASE_ADDRESS_IO_MASK ); |
| } else { |
| if ( ! pci->membase ) |
| pci->membase = |
| ( bar & PCI_BASE_ADDRESS_MEM_MASK ); |
| /* Skip next BAR if 64-bit */ |
| if ( bar & PCI_BASE_ADDRESS_MEM_TYPE_64 ) |
| reg += 4; |
| } |
| } |
| } |
| |
| /** |
| * Enable PCI device |
| * |
| * @v pci PCI device |
| * |
| * Set device to be a busmaster in case BIOS neglected to do so. Also |
| * adjust PCI latency timer to a reasonable value, 32. |
| */ |
| void adjust_pci_device ( struct pci_device *pci ) { |
| unsigned short new_command, pci_command; |
| unsigned char pci_latency; |
| |
| pci_read_config_word ( pci, PCI_COMMAND, &pci_command ); |
| new_command = ( pci_command | PCI_COMMAND_MASTER | |
| PCI_COMMAND_MEM | PCI_COMMAND_IO ); |
| if ( pci_command != new_command ) { |
| DBG ( "PCI BIOS has not enabled device %02x:%02x.%x! " |
| "Updating PCI command %04x->%04x\n", pci->bus, |
| PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ), |
| pci_command, new_command ); |
| pci_write_config_word ( pci, PCI_COMMAND, new_command ); |
| } |
| |
| pci_read_config_byte ( pci, PCI_LATENCY_TIMER, &pci_latency); |
| if ( pci_latency < 32 ) { |
| DBG ( "PCI device %02x:%02x.%x latency timer is unreasonably " |
| "low at %d. Setting to 32.\n", pci->bus, |
| PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ), |
| pci_latency ); |
| pci_write_config_byte ( pci, PCI_LATENCY_TIMER, 32); |
| } |
| } |
| |
| /** |
| * Probe a PCI device |
| * |
| * @v pci PCI device |
| * @ret rc Return status code |
| * |
| * Searches for a driver for the PCI device. If a driver is found, |
| * its probe() routine is called. |
| */ |
| static int pci_probe ( struct pci_device *pci ) { |
| struct pci_driver *driver; |
| struct pci_device_id *id; |
| unsigned int i; |
| int rc; |
| |
| DBG ( "Adding PCI device %02x:%02x.%x (%04x:%04x mem %lx io %lx " |
| "irq %d)\n", pci->bus, PCI_SLOT ( pci->devfn ), |
| PCI_FUNC ( pci->devfn ), pci->vendor, pci->device, |
| pci->membase, pci->ioaddr, pci->irq ); |
| |
| for_each_table_entry ( driver, PCI_DRIVERS ) { |
| for ( i = 0 ; i < driver->id_count ; i++ ) { |
| id = &driver->ids[i]; |
| if ( ( id->vendor != PCI_ANY_ID ) && |
| ( id->vendor != pci->vendor ) ) |
| continue; |
| if ( ( id->device != PCI_ANY_ID ) && |
| ( id->device != pci->device ) ) |
| continue; |
| pci->driver = driver; |
| pci->driver_name = id->name; |
| DBG ( "...using driver %s\n", pci->driver_name ); |
| if ( ( rc = driver->probe ( pci, id ) ) != 0 ) { |
| DBG ( "......probe failed\n" ); |
| continue; |
| } |
| return 0; |
| } |
| } |
| |
| DBG ( "...no driver found\n" ); |
| return -ENOTTY; |
| } |
| |
| /** |
| * Remove a PCI device |
| * |
| * @v pci PCI device |
| */ |
| static void pci_remove ( struct pci_device *pci ) { |
| pci->driver->remove ( pci ); |
| DBG ( "Removed PCI device %02x:%02x.%x\n", pci->bus, |
| PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ) ); |
| } |
| |
| /** |
| * Probe PCI root bus |
| * |
| * @v rootdev PCI bus root device |
| * |
| * Scans the PCI bus for devices and registers all devices it can |
| * find. |
| */ |
| static int pcibus_probe ( struct root_device *rootdev ) { |
| struct pci_device *pci = NULL; |
| unsigned int max_bus; |
| unsigned int bus; |
| unsigned int devfn; |
| uint8_t hdrtype = 0; |
| uint32_t tmp; |
| int rc; |
| |
| max_bus = pci_max_bus(); |
| for ( bus = 0 ; bus <= max_bus ; bus++ ) { |
| for ( devfn = 0 ; devfn <= 0xff ; devfn++ ) { |
| |
| /* Allocate struct pci_device */ |
| if ( ! pci ) |
| pci = malloc ( sizeof ( *pci ) ); |
| if ( ! pci ) { |
| rc = -ENOMEM; |
| goto err; |
| } |
| memset ( pci, 0, sizeof ( *pci ) ); |
| pci->bus = bus; |
| pci->devfn = devfn; |
| |
| /* Skip all but the first function on |
| * non-multifunction cards |
| */ |
| if ( PCI_FUNC ( devfn ) == 0 ) { |
| pci_read_config_byte ( pci, PCI_HEADER_TYPE, |
| &hdrtype ); |
| } else if ( ! ( hdrtype & 0x80 ) ) { |
| continue; |
| } |
| |
| /* Check for physical device presence */ |
| pci_read_config_dword ( pci, PCI_VENDOR_ID, &tmp ); |
| if ( ( tmp == 0xffffffff ) || ( tmp == 0 ) ) |
| continue; |
| |
| /* Populate struct pci_device */ |
| pci->vendor = ( tmp & 0xffff ); |
| pci->device = ( tmp >> 16 ); |
| pci_read_config_dword ( pci, PCI_REVISION, &tmp ); |
| pci->class = ( tmp >> 8 ); |
| pci_read_config_byte ( pci, PCI_INTERRUPT_LINE, |
| &pci->irq ); |
| pci_read_bases ( pci ); |
| |
| /* Add to device hierarchy */ |
| snprintf ( pci->dev.name, sizeof ( pci->dev.name ), |
| "PCI%02x:%02x.%x", bus, |
| PCI_SLOT ( devfn ), PCI_FUNC ( devfn ) ); |
| pci->dev.desc.bus_type = BUS_TYPE_PCI; |
| pci->dev.desc.location = PCI_BUSDEVFN (bus, devfn); |
| pci->dev.desc.vendor = pci->vendor; |
| pci->dev.desc.device = pci->device; |
| pci->dev.desc.class = pci->class; |
| pci->dev.desc.ioaddr = pci->ioaddr; |
| pci->dev.desc.irq = pci->irq; |
| pci->dev.parent = &rootdev->dev; |
| list_add ( &pci->dev.siblings, &rootdev->dev.children); |
| INIT_LIST_HEAD ( &pci->dev.children ); |
| |
| /* Look for a driver */ |
| if ( pci_probe ( pci ) == 0 ) { |
| /* pcidev registered, we can drop our ref */ |
| pci = NULL; |
| } else { |
| /* Not registered; re-use struct pci_device */ |
| list_del ( &pci->dev.siblings ); |
| } |
| } |
| } |
| |
| free ( pci ); |
| return 0; |
| |
| err: |
| free ( pci ); |
| pcibus_remove ( rootdev ); |
| return rc; |
| } |
| |
| /** |
| * Remove PCI root bus |
| * |
| * @v rootdev PCI bus root device |
| */ |
| static void pcibus_remove ( struct root_device *rootdev ) { |
| struct pci_device *pci; |
| struct pci_device *tmp; |
| |
| list_for_each_entry_safe ( pci, tmp, &rootdev->dev.children, |
| dev.siblings ) { |
| pci_remove ( pci ); |
| list_del ( &pci->dev.siblings ); |
| free ( pci ); |
| } |
| } |
| |
| /** PCI bus root device driver */ |
| static struct root_driver pci_root_driver = { |
| .probe = pcibus_probe, |
| .remove = pcibus_remove, |
| }; |
| |
| /** PCI bus root device */ |
| struct root_device pci_root_device __root_device = { |
| .dev = { .name = "PCI" }, |
| .driver = &pci_root_driver, |
| }; |