| /* | |
| * Copyright (C) 2009 Joshua Oreman <oremanj@rwcr.net>. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301, USA. | |
| */ | |
| FILE_LICENCE ( GPL2_OR_LATER ); | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <errno.h> | |
| #include <ipxe/net80211.h> | |
| #include <ipxe/ethernet.h> | |
| #include <usr/ifmgmt.h> | |
| #include <usr/iwmgmt.h> | |
| /** @file | |
| * | |
| * Wireless network interface management | |
| * | |
| */ | |
| /** | |
| * Print status of 802.11 device | |
| * | |
| * @v dev 802.11 device | |
| */ | |
| void iwstat ( struct net80211_device *dev ) { | |
| ifstat ( dev->netdev ); | |
| printf ( " [802.11 "); | |
| if ( dev->state & NET80211_ASSOCIATED ) { | |
| printf ( "SSID '%s', ", dev->essid ); | |
| } else { | |
| printf ( "not associated, " ); | |
| } | |
| if ( dev->channel < dev->nr_channels && dev->rate < dev->nr_rates ) { | |
| printf ( "Ch:%d Sig:%d", dev->channels[dev->channel].channel_nr, | |
| dev->last_signal ); | |
| switch ( dev->hw->signal_type ) { | |
| case NET80211_SIGNAL_NONE: | |
| printf ( "?" ); | |
| break; | |
| case NET80211_SIGNAL_ARBITRARY: | |
| printf ( "/%d", dev->hw->signal_max ); | |
| break; | |
| case NET80211_SIGNAL_DB: | |
| printf ( "/%d dB", dev->hw->signal_max ); | |
| break; | |
| case NET80211_SIGNAL_DBM: | |
| printf ( " dBm" ); | |
| break; | |
| } | |
| printf ( ", Qual:%d%% Rate:%d Mbps]\n", | |
| ( dev->rx_beacon_interval == 0 ? 0 : | |
| 100 * dev->tx_beacon_interval / | |
| dev->rx_beacon_interval ), | |
| dev->rates[dev->rate] / 10 ); | |
| } else { | |
| printf ( "antenna off]\n" ); | |
| } | |
| if ( dev->state & NET80211_WORKING ) { | |
| printf ( " [associating" ); | |
| if ( dev->associating ) | |
| printf ( " to '%s'", dev->associating->essid ); | |
| printf ( "...]\n" ); | |
| } | |
| } | |
| /** Identifiers for 802.11 cryptography types, indexed by type number */ | |
| static const char *crypto_types[] = { | |
| [NET80211_CRYPT_NONE] = "Open", | |
| [NET80211_CRYPT_WEP] = "WEP ", | |
| [NET80211_CRYPT_TKIP] = "WPA ", | |
| [NET80211_CRYPT_CCMP] = "WPA2", | |
| [NET80211_CRYPT_UNKNOWN] = "UNK ", | |
| }; | |
| /** Number of 802.11 cryptography types defined */ | |
| #define NR_CRYPTO_TYPES ( sizeof ( crypto_types ) / sizeof ( crypto_types[0] ) ) | |
| /** Identifiers for 802.11 authentication types, indexed by type number */ | |
| static const char *auth_types[] = { | |
| [NET80211_SECPROT_NONE] = "", | |
| [NET80211_SECPROT_PSK] = "PSK", | |
| [NET80211_SECPROT_EAP] = "802.1X", | |
| [NET80211_SECPROT_UNKNOWN] = "UNK", | |
| }; | |
| /** Number of 802.11 authentication types defined */ | |
| #define NR_AUTH_TYPES ( sizeof ( auth_types ) / sizeof ( auth_types[0] ) ) | |
| /** | |
| * Scan for wireless networks using 802.11 device | |
| * | |
| * @v dev 802.11 device | |
| * @v active Whether to use active scanning | |
| * | |
| * The list of networks found will be printed in tabular format. | |
| * | |
| * This function is safe to call at all times, whether the 802.11 | |
| * device is open or not, but if called while the auto-association | |
| * task is running it will return an error indication. | |
| */ | |
| int iwlist ( struct net80211_device *dev ) { | |
| struct net80211_probe_ctx *ctx; | |
| struct list_head *networks; | |
| struct net80211_wlan *wlan; | |
| char ssid_buf[22]; | |
| int rc; | |
| unsigned i; | |
| int was_opened = netdev_is_open ( dev->netdev ); | |
| int was_channel = dev->channels[dev->channel].channel_nr; | |
| if ( ! was_opened ) { | |
| dev->state |= NET80211_NO_ASSOC; | |
| rc = netdev_open ( dev->netdev ); | |
| if ( rc < 0 ) | |
| goto err; | |
| } | |
| if ( dev->state & NET80211_WORKING ) { | |
| rc = -EINVAL; | |
| goto err_close_netdev; | |
| } | |
| if ( ! was_opened ) { | |
| rc = net80211_prepare_probe ( dev, dev->hw->bands, 0 ); | |
| if ( rc < 0 ) | |
| goto err_close_netdev; | |
| } | |
| ctx = net80211_probe_start ( dev, "", 0 ); | |
| if ( ! ctx ) { | |
| rc = -ENOMEM; | |
| goto err_close_netdev; | |
| } | |
| while ( ! ( rc = net80211_probe_step ( ctx ) ) ) { | |
| step(); | |
| } | |
| networks = net80211_probe_finish_all ( ctx ); | |
| if ( list_empty ( networks ) ) { | |
| goto err_free_networks; | |
| } | |
| rc = 0; | |
| printf ( "Networks on %s:\n\n", dev->netdev->name ); | |
| /* Output format: | |
| * 0 1 2 3 4 5 6 | |
| * 0123456789012345678901234567890123456789012345678901234567890 | |
| * [Sig] SSID BSSID Ch Crypt/Auth | |
| * ------------------------------------------------------------- | |
| * [ 15] abcdefghijklmnopqrst> 00:00:00:00:00:00 11 Open | |
| * ... or WPA PSK etc. | |
| */ | |
| /* Quoting the dashes and spaces verbatim uses less code space | |
| than generating them programmatically. */ | |
| printf ( "[Sig] SSID BSSID Ch Crypt/Auth\n" | |
| "-------------------------------------------------------------\n" ); | |
| list_for_each_entry ( wlan, networks, list ) { | |
| /* Format SSID into 22-character string, space-padded, | |
| with '>' indicating truncation */ | |
| snprintf ( ssid_buf, sizeof ( ssid_buf ), "%s", wlan->essid ); | |
| for ( i = strlen ( ssid_buf ); i < sizeof ( ssid_buf ) - 1; | |
| i++ ) | |
| ssid_buf[i] = ' '; | |
| if ( ssid_buf[sizeof ( ssid_buf ) - 2] != ' ' ) | |
| ssid_buf[sizeof ( ssid_buf ) - 2] = '>'; | |
| ssid_buf[sizeof ( ssid_buf ) - 1] = 0; | |
| /* Sanity check */ | |
| if ( wlan->crypto >= NR_CRYPTO_TYPES || | |
| wlan->handshaking >= NR_AUTH_TYPES ) | |
| continue; | |
| printf ( "[%3d] %s %s %2d %s %s\n", | |
| wlan->signal < 0 ? 100 + wlan->signal : wlan->signal, | |
| ssid_buf, eth_ntoa ( wlan->bssid ), wlan->channel, | |
| crypto_types[wlan->crypto], | |
| auth_types[wlan->handshaking] ); | |
| } | |
| printf ( "\n" ); | |
| err_free_networks: | |
| net80211_free_wlanlist ( networks ); | |
| err_close_netdev: | |
| if ( ! was_opened ) { | |
| dev->state &= ~NET80211_NO_ASSOC; | |
| netdev_close ( dev->netdev ); | |
| } else { | |
| net80211_change_channel ( dev, was_channel ); | |
| } | |
| if ( ! rc ) | |
| return 0; | |
| err: | |
| printf ( "Scanning for networks on %s: %s\n", | |
| dev->netdev->name, strerror ( rc ) ); | |
| return rc; | |
| } |