| /* |
| * libkir: a transition library for -DKEEP_IT_REAL |
| * |
| * Michael Brown <mbrown@fensystems.co.uk> |
| * |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ) |
| |
| /**************************************************************************** |
| * This file defines libkir: an interface between external and |
| * internal environments when -DKEEP_IT_REAL is used, so that both |
| * internal and external environments are in real mode. It deals with |
| * switching data segments and the stack. It provides the following |
| * functions: |
| * |
| * ext_to_kir & switch between external and internal (kir) |
| * kir_to_ext environments, preserving all non-segment |
| * registers |
| * |
| * kir_call issue a call to an internal routine from external |
| * code |
| * |
| * libkir is written to avoid assuming that segments are anything |
| * other than opaque data types, and also avoids assuming that the |
| * stack pointer is 16-bit. This should enable it to run just as well |
| * in 16:16 or 16:32 protected mode as in real mode. |
| **************************************************************************** |
| */ |
| |
| /* Breakpoint for when debugging under bochs */ |
| #define BOCHSBP xchgw %bx, %bx |
| |
| .text |
| .arch i386 |
| .section ".text16", "awx", @progbits |
| .code16 |
| |
| /**************************************************************************** |
| * init_libkir (real-mode or 16:xx protected-mode far call) |
| * |
| * Initialise libkir ready for transitions to the kir environment |
| * |
| * Parameters: |
| * %cs : .text16 segment |
| * %ds : .data16 segment |
| **************************************************************************** |
| */ |
| .globl init_libkir |
| init_libkir: |
| /* Record segment registers */ |
| pushw %ds |
| popw %cs:kir_ds |
| lret |
| |
| /**************************************************************************** |
| * ext_to_kir (real-mode or 16:xx protected-mode near call) |
| * |
| * Switch from external stack and segment registers to internal stack |
| * and segment registers. %ss:sp is restored from the saved kir_ds |
| * and kir_sp. %ds, %es, %fs and %gs are all restored from the saved |
| * kir_ds. All other registers are preserved. |
| * |
| * %cs:0000 must point to the start of the runtime image code segment |
| * on entry. |
| * |
| * Parameters: none |
| **************************************************************************** |
| */ |
| |
| .globl ext_to_kir |
| ext_to_kir: |
| /* Record external segment registers */ |
| movw %ds, %cs:ext_ds |
| pushw %cs |
| popw %ds /* Set %ds = %cs for easier access to variables */ |
| movw %es, %ds:ext_es |
| movw %fs, %ds:ext_fs |
| movw %gs, %ds:ext_fs |
| |
| /* Preserve registers */ |
| movw %ax, %ds:save_ax |
| |
| /* Extract near return address from stack */ |
| popw %ds:save_retaddr |
| |
| /* Record external %ss:esp */ |
| movw %ss, %ds:ext_ss |
| movl %esp, %ds:ext_esp |
| |
| /* Load internal segment registers and stack pointer */ |
| movw %ds:kir_ds, %ax |
| movw %ax, %ss |
| movzwl %ds:kir_sp, %esp |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %fs |
| movw %ax, %gs |
| 1: |
| |
| /* Place return address on new stack */ |
| pushw %cs:save_retaddr |
| |
| /* Restore registers and return */ |
| movw %cs:save_ax, %ax |
| ret |
| |
| /**************************************************************************** |
| * kir_to_ext (real-mode or 16:xx protected-mode near call) |
| * |
| * Switch from internal stack and segment registers to external stack |
| * and segment registers. %ss:%esp is restored from the saved ext_ss |
| * and ext_esp. Other segment registers are restored from the |
| * corresponding locations. All other registers are preserved. |
| * |
| * Note that it is actually %ss that is recorded as kir_ds, on the |
| * assumption that %ss == %ds when kir_to_ext is called. |
| * |
| * Parameters: none |
| **************************************************************************** |
| */ |
| |
| .globl kir_to_ext |
| kir_to_ext: |
| /* Record near return address */ |
| pushw %cs |
| popw %ds /* Set %ds = %cs for easier access to variables */ |
| popw %ds:save_retaddr |
| |
| /* Record internal segment registers and %sp */ |
| movw %ss, %ds:kir_ds |
| movw %sp, %ds:kir_sp |
| |
| /* Load external segment registers and stack pointer */ |
| movw %ds:ext_ss, %ss |
| movl %ds:ext_esp, %esp |
| movw %ds:ext_gs, %gs |
| movw %ds:ext_fs, %fs |
| movw %ds:ext_es, %es |
| movw %ds:ext_ds, %ds |
| |
| /* Return */ |
| pushw %cs:save_retaddr |
| ret |
| |
| /**************************************************************************** |
| * kir_call (real-mode or 16:xx protected-mode far call) |
| * |
| * Call a specific C function in the internal code. The prototype of |
| * the C function must be |
| * void function ( struct i386_all_resg *ix86 ); |
| * ix86 will point to a struct containing the real-mode registers |
| * at entry to kir_call. |
| * |
| * All registers will be preserved across kir_call(), unless the C |
| * function explicitly overwrites values in ix86. Interrupt status |
| * will also be preserved. |
| * |
| * Parameters: |
| * function : (32-bit) virtual address of C function to call |
| * |
| * Example usage: |
| * pushl $pxe_api_call |
| * lcall $UNDI_CS, $kir_call |
| * addw $4, %sp |
| * to call in to the C function |
| * void pxe_api_call ( struct i386_all_regs *ix86 ); |
| **************************************************************************** |
| */ |
| |
| .globl kir_call |
| kir_call: |
| /* Preserve flags. Must do this before any operation that may |
| * affect flags. |
| */ |
| pushfl |
| popl %cs:save_flags |
| |
| /* Disable interrupts. We do funny things with the stack, and |
| * we're not re-entrant. |
| */ |
| cli |
| |
| /* Extract address of internal routine from stack. We must do |
| * this without using (%bp), because we may be called with |
| * either a 16-bit or a 32-bit stack segment. |
| */ |
| popl %cs:save_retaddr /* Scratch location */ |
| popl %cs:save_function |
| subl $8, %esp /* Restore %esp */ |
| |
| /* Switch to internal stack. Note that the external stack is |
| * inaccessible once we're running internally (since we have |
| * no concept of 48-bit far pointers) |
| */ |
| call ext_to_kir |
| |
| /* Store external registers on internal stack */ |
| pushl %cs:save_flags |
| pushal |
| pushl %cs:ext_fs_and_gs |
| pushl %cs:ext_ds_and_es |
| pushl %cs:ext_cs_and_ss |
| |
| /* Push &ix86 on stack and call function */ |
| sti |
| pushl %esp |
| data32 call *%cs:save_function |
| popl %eax /* discard */ |
| |
| /* Restore external registers from internal stack */ |
| popl %cs:ext_cs_and_ss |
| popl %cs:ext_ds_and_es |
| popl %cs:ext_fs_and_gs |
| popal |
| popl %cs:save_flags |
| |
| /* Switch to external stack */ |
| call kir_to_ext |
| |
| /* Restore flags */ |
| pushl %cs:save_flags |
| popfl |
| |
| /* Return */ |
| lret |
| |
| /**************************************************************************** |
| * Stored internal and external stack and segment registers |
| **************************************************************************** |
| */ |
| |
| ext_cs_and_ss: |
| ext_cs: .word 0 |
| ext_ss: .word 0 |
| ext_ds_and_es: |
| ext_ds: .word 0 |
| ext_es: .word 0 |
| ext_fs_and_gs: |
| ext_fs: .word 0 |
| ext_gs: .word 0 |
| ext_esp: .long 0 |
| |
| .globl kir_ds |
| kir_ds: .word 0 |
| .globl kir_sp |
| kir_sp: .word _estack |
| |
| /**************************************************************************** |
| * Temporary variables |
| **************************************************************************** |
| */ |
| save_ax: .word 0 |
| save_retaddr: .long 0 |
| save_flags: .long 0 |
| save_function: .long 0 |
