| /** @file | |
| Functions prototype of Multiple Processor PPI services. | |
| Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _PEI_MP_SERVICES_H_ | |
| #define _PEI_MP_SERVICES_H_ | |
| #include "CpuMpPei.h" | |
| // | |
| // The MP data for switch BSP | |
| // | |
| #define CPU_SWITCH_STATE_IDLE 0 | |
| #define CPU_SWITCH_STATE_STORED 1 | |
| #define CPU_SWITCH_STATE_LOADED 2 | |
| #define CPU_CHECK_AP_INTERVAL 0x100 // 100 microseconds | |
| /** | |
| This function is called by both the BSP and the AP which is to become the BSP to | |
| Exchange execution context including stack between them. After return from this | |
| function, the BSP becomes AP and the AP becomes the BSP. | |
| @param MyInfo Pointer to buffer holding the exchanging information for the executing processor. | |
| @param OthersInfo Pointer to buffer holding the exchanging information for the peer. | |
| **/ | |
| VOID | |
| EFIAPI | |
| AsmExchangeRole ( | |
| IN CPU_EXCHANGE_ROLE_INFO *MyInfo, | |
| IN CPU_EXCHANGE_ROLE_INFO *OthersInfo | |
| ); | |
| /** | |
| This service retrieves the number of logical processor in the platform | |
| and the number of those logical processors that are enabled on this boot. | |
| This service may only be called from the BSP. | |
| This function is used to retrieve the following information: | |
| - The number of logical processors that are present in the system. | |
| - The number of enabled logical processors in the system at the instant | |
| this call is made. | |
| Because MP Service Ppi provides services to enable and disable processors | |
| dynamically, the number of enabled logical processors may vary during the | |
| course of a boot session. | |
| If this service is called from an AP, then EFI_DEVICE_ERROR is returned. | |
| If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then | |
| EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors | |
| is returned in NumberOfProcessors, the number of currently enabled processor | |
| is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This Pointer to this instance of the PPI. | |
| @param[out] NumberOfProcessors Pointer to the total number of logical processors in | |
| the system, including the BSP and disabled APs. | |
| @param[out] NumberOfEnabledProcessors | |
| Number of processors in the system that are enabled. | |
| @retval EFI_SUCCESS The number of logical processors and enabled | |
| logical processors was retrieved. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL. | |
| NumberOfEnabledProcessors is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiGetNumberOfProcessors ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| OUT UINTN *NumberOfProcessors, | |
| OUT UINTN *NumberOfEnabledProcessors | |
| ); | |
| /** | |
| Gets detailed MP-related information on the requested processor at the | |
| instant this call is made. This service may only be called from the BSP. | |
| This service retrieves detailed MP-related information about any processor | |
| on the platform. Note the following: | |
| - The processor information may change during the course of a boot session. | |
| - The information presented here is entirely MP related. | |
| Information regarding the number of caches and their sizes, frequency of operation, | |
| slot numbers is all considered platform-related information and is not provided | |
| by this service. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This Pointer to this instance of the PPI. | |
| @param[in] ProcessorNumber Pointer to the total number of logical processors in | |
| the system, including the BSP and disabled APs. | |
| @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled. | |
| @retval EFI_SUCCESS Processor information was returned. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist in the platform. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiGetProcessorInfo ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| IN UINTN ProcessorNumber, | |
| OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer | |
| ); | |
| /** | |
| This service executes a caller provided function on all enabled APs. APs can | |
| run either simultaneously or one at a time in sequence. This service supports | |
| both blocking requests only. This service may only | |
| be called from the BSP. | |
| This function is used to dispatch all the enabled APs to the function specified | |
| by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned | |
| immediately and Procedure is not started on any AP. | |
| If SingleThread is TRUE, all the enabled APs execute the function specified by | |
| Procedure one by one, in ascending order of processor handle number. Otherwise, | |
| all the enabled APs execute the function specified by Procedure simultaneously. | |
| If the timeout specified by TimeoutInMicroSeconds expires before all APs return | |
| from Procedure, then Procedure on the failed APs is terminated. All enabled APs | |
| are always available for further calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() | |
| and EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If FailedCpuList is not NULL, its | |
| content points to the list of processor handle numbers in which Procedure was | |
| terminated. | |
| Note: It is the responsibility of the consumer of the EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() | |
| to make sure that the nature of the code that is executed on the BSP and the | |
| dispatched APs is well controlled. The MP Services Ppi does not guarantee | |
| that the Procedure function is MP-safe. Hence, the tasks that can be run in | |
| parallel are limited to certain independent tasks and well-controlled exclusive | |
| code. PEI services and Ppis may not be called by APs unless otherwise | |
| specified. | |
| In blocking execution mode, BSP waits until all APs finish or | |
| TimeoutInMicroSeconds expires. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance. | |
| @param[in] Procedure A pointer to the function to be run on enabled APs of | |
| the system. | |
| @param[in] SingleThread If TRUE, then all the enabled APs execute the function | |
| specified by Procedure one by one, in ascending order | |
| of processor handle number. If FALSE, then all the | |
| enabled APs execute the function specified by Procedure | |
| simultaneously. | |
| @param[in] TimeoutInMicroSeconds | |
| Indicates the time limit in microseconds for APs to | |
| return from Procedure, for blocking mode only. Zero | |
| means infinity. If the timeout expires before all APs | |
| return from Procedure, then Procedure on the failed APs | |
| is terminated. All enabled APs are available for next | |
| function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() | |
| or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the | |
| timeout expires in blocking mode, BSP returns | |
| EFI_TIMEOUT. | |
| @param[in] ProcedureArgument The parameter passed into Procedure for all APs. | |
| @retval EFI_SUCCESS In blocking mode, all APs have finished before the | |
| timeout expired. | |
| @retval EFI_DEVICE_ERROR Caller processor is AP. | |
| @retval EFI_NOT_STARTED No enabled APs exist in the system. | |
| @retval EFI_NOT_READY Any enabled APs are busy. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before all | |
| enabled APs have finished. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiStartupAllAPs ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN BOOLEAN SingleThread, | |
| IN UINTN TimeoutInMicroSeconds, | |
| IN VOID *ProcedureArgument OPTIONAL | |
| ); | |
| /** | |
| This service lets the caller get one enabled AP to execute a caller-provided | |
| function. The caller can request the BSP to wait for the completion | |
| of the AP. This service may only be called from the BSP. | |
| This function is used to dispatch one enabled AP to the function specified by | |
| Procedure passing in the argument specified by ProcedureArgument. | |
| The execution is in blocking mode. The BSP waits until the AP finishes or | |
| TimeoutInMicroSecondss expires. | |
| If the timeout specified by TimeoutInMicroseconds expires before the AP returns | |
| from Procedure, then execution of Procedure by the AP is terminated. The AP is | |
| available for subsequent calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() and | |
| EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance. | |
| @param[in] Procedure A pointer to the function to be run on enabled APs of | |
| the system. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the | |
| total number of logical processors minus 1. The total | |
| number of logical processors can be retrieved by | |
| EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). | |
| @param[in] TimeoutInMicroseconds | |
| Indicates the time limit in microseconds for APs to | |
| return from Procedure, for blocking mode only. Zero | |
| means infinity. If the timeout expires before all APs | |
| return from Procedure, then Procedure on the failed APs | |
| is terminated. All enabled APs are available for next | |
| function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() | |
| or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the | |
| timeout expires in blocking mode, BSP returns | |
| EFI_TIMEOUT. | |
| @param[in] ProcedureArgument The parameter passed into Procedure for all APs. | |
| @retval EFI_SUCCESS In blocking mode, specified AP finished before the | |
| timeout expires. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before the | |
| specified AP has finished. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiStartupThisAP ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN UINTN ProcessorNumber, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL | |
| ); | |
| /** | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. This call can only be performed | |
| by the current BSP. | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. The new BSP can take over the | |
| execution of the old BSP and continue seamlessly from where the old one left | |
| off. | |
| If the BSP cannot be switched prior to the return from this service, then | |
| EFI_UNSUPPORTED must be returned. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the | |
| total number of logical processors minus 1. The total | |
| number of logical processors can be retrieved by | |
| EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). | |
| @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled | |
| AP. Otherwise, it will be disabled. | |
| @retval EFI_SUCCESS BSP successfully switched. | |
| @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this | |
| service returning. | |
| @retval EFI_UNSUPPORTED Switching the BSP is not supported. | |
| @retval EFI_SUCCESS The calling processor is an AP. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled | |
| AP. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiSwitchBSP ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableOldBSP | |
| ); | |
| /** | |
| This service lets the caller enable or disable an AP from this point onward. | |
| This service may only be called from the BSP. | |
| This service allows the caller enable or disable an AP from this point onward. | |
| The caller can optionally specify the health status of the AP by Health. If | |
| an AP is being disabled, then the state of the disabled AP is implementation | |
| dependent. If an AP is enabled, then the implementation must guarantee that a | |
| complete initialization sequence is performed on the AP, so the AP is in a state | |
| that is compatible with an MP operating system. | |
| If the enable or disable AP operation cannot be completed prior to the return | |
| from this service, then EFI_UNSUPPORTED must be returned. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the | |
| total number of logical processors minus 1. The total | |
| number of logical processors can be retrieved by | |
| EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). | |
| @param[in] EnableAP Specifies the new state for the processor for enabled, | |
| FALSE for disabled. | |
| @param[in] HealthFlag If not NULL, a pointer to a value that specifies the | |
| new health status of the AP. This flag corresponds to | |
| StatusFlag defined in EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo(). | |
| Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other | |
| bits are ignored. If it is NULL, this parameter is | |
| ignored. | |
| @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior | |
| to this service returning. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber | |
| does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiEnableDisableAP ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableAP, | |
| IN UINT32 *HealthFlag OPTIONAL | |
| ); | |
| /** | |
| This return the handle number for the calling processor. This service may be | |
| called from the BSP and APs. | |
| This service returns the processor handle number for the calling processor. | |
| The returned value is in the range from 0 to the total number of logical | |
| processors minus 1. The total number of logical processors can be retrieved | |
| with EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). This service may be | |
| called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER | |
| is returned. Otherwise, the current processors handle number is returned in | |
| ProcessorNumber, and EFI_SUCCESS is returned. | |
| @param[in] PeiServices An indirect pointer to the PEI Services Table | |
| published by the PEI Foundation. | |
| @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance. | |
| @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the | |
| total number of logical processors minus 1. The total | |
| number of logical processors can be retrieved by | |
| EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). | |
| @retval EFI_SUCCESS The current processor handle number was returned in | |
| ProcessorNumber. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PeiWhoAmI ( | |
| IN CONST EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_MP_SERVICES_PPI *This, | |
| OUT UINTN *ProcessorNumber | |
| ); | |
| #endif |