QuarkSocPkg/QuarkSouthCluster/Include/SDCard.h

/** @file

Header file for Industry SD Card 2.0 spec.

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _SD_CARD_H
#define _SD_CARD_H

#include "MMC.h"

#pragma pack(1)

#define CHECK_PATTERN     0xAA  ///< Physical Layer Simplified Specification Version 3.01 recommended 0xAA

#define ACMD6             6
#define ACMD13            13
#define ACMD23            23
#define ACMD41            41
#define ACMD42            42
#define ACMD51            51


#define SWITCH_FUNC              CMD6
#define SEND_IF_COND             CMD8


#define SET_BUS_WIDTH            ACMD6
#define SD_STATUS                ACMD13
#define SET_WR_BLK_ERASE_COUNT   ACMD23
#define SD_SEND_OP_COND          ACMD41
#define SET_CLR_CARD_DETECT      ACMD42
#define SEND_SCR                 ACMD51



#define SD_BUS_WIDTH_1              0
#define SD_BUS_WIDTH_4              2



#define FREQUENCY_SD_PP        (25 * 1000 * 1000)
#define FREQUENCY_SD_PP_HIGH   (50 * 1000 * 1000)


#define SD_SPEC_10                  0
#define SD_SPEC_11                  1
#define SD_SPEC_20                  2


#define VOLTAGE_27_36               0x1

typedef struct {
  UINT8   NotUsed:            1; //  1 [0:0]
  UINT8   CRC:                7; //  CRC [7:1]
  UINT8   ECC:                2; //  ECC code [9:8]
  UINT8   FILE_FORMAT:        2; //  File format [11:10]
  UINT8   TMP_WRITE_PROTECT:  1; //  Temporary write protection [12:12]
  UINT8   PERM_WRITE_PROTECT: 1; //  Permanent write protection [13:13]
  UINT8   COPY:               1; //  Copy flag (OTP) [14:14]
  UINT8   FILE_FORMAT_GRP:    1; //  File format group [15:15]
  UINT16  Reserved0:          5; //  0 [20:16]
  UINT16  WRITE_BL_PARTIAL:   1; //  Partial blocks for write allowed [21:21]
  UINT16  WRITE_BL_LEN:       4; //  Max. write data block length [25:22]
  UINT16  R2W_FACTOR:         3; //  Write speed factor [28:26]
  UINT16  DEFAULT_ECC:        2; //  Manufacturer default ECC [30:29]
  UINT16  WP_GRP_ENABLE:      1; //  Write protect group enable [31:31]
  UINT16  WP_GRP_SIZE:        7; //  Write protect group size [38:32]
  UINT16  SECTOR_SIZE:        7; //  Erase sector size [45:39]
  UINT16  ERASE_BLK_EN:       1; //  Erase single block enable [46:46]
  UINT16  Reserved1:          1; //  0 [47:47]

  UINT32  C_SIZE:             22; //  Device size [69:48]
  UINT32  Reserved2:          6;  //  0 [75:70]
  UINT32  DSR_IMP:            1;  //  DSR implemented [76:76]
  UINT32  READ_BLK_MISALIGN:  1;  //  Read block misalignment [77:77]
  UINT32  WRITE_BLK_MISALIGN: 1;  //  Write block misalignment [78:78]
  UINT32  READ_BL_PARTIAL:    1;  //  Partial blocks for read allowed [79:79]

  UINT16  READ_BL_LEN:        4;  //  Max. read data block length [83:80]
  UINT16  CCC:                12; //  Card command classes [95:84]
  UINT8   TRAN_SPEED          ;   //  Max. bus clock frequency [103:96]
  UINT8   NSAC                ;   //  Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
  UINT8   TAAC                ;   //  Data read access-time 1 [119:112]
  UINT8   Reserved3:          6;  //  0 [125:120]
  UINT8   CSD_STRUCTURE:      2;  //  CSD structure [127:126]
}CSD_SDV2;

typedef struct {
  UINT32  Reserved0;
  UINT32  Reserved1:               16;
  UINT32  SD_BUS_WIDTH:            4;
  UINT32  SD_SECURITY:             3;
  UINT32  DATA_STAT_AFTER_ERASE:   1;
  UINT32  SD_SPEC:                 4;
  UINT32  SCR_STRUCT:              4;
}SCR;


typedef struct {
  UINT8   Reserved0[50];
  UINT8   ERASE_OFFSET:               2;
  UINT8   ERASE_TIMEOUT:              6;
  UINT16  ERASE_SIZE;
  UINT8   Reserved1:                  4;
  UINT8   AU_SIZE:                    4;
  UINT8   PERFORMANCE_MOVE;
  UINT8   SPEED_CLASS;
  UINT32  SIZE_OF_PROTECTED_AREA;
  UINT32  SD_CARD_TYPE:              16;
  UINT32  Reserved2:                 13;
  UINT32  SECURED_MODE:               1;
  UINT32  DAT_BUS_WIDTH:              2;
}SD_STATUS_REG;



typedef struct {
  UINT8   Reserved0[34];
  UINT16  Group1BusyStatus;
  UINT16  Group2BusyStatus;
  UINT16  Group3BusyStatus;
  UINT16  Group4BusyStatus;
  UINT16  Group5BusyStatus;
  UINT16  Group6BusyStatus;
  UINT8   DataStructureVersion;
  UINT8   Group21Status;
  UINT8   Group43Status;
  UINT8   Group65Status;
  UINT16  Group1Function;
  UINT16  Group2Function;
  UINT16  Group3Function;
  UINT16  Group4Function;
  UINT16  Group5Function;
  UINT16  Group6Function;
  UINT16  MaxCurrent;
}SWITCH_STATUS;


#pragma pack()
#endif