QuarkPlatformPkg/Acpi/AcpiTables/Fadt/Fadt1.0.aslc

/** @file
This file describes the contents of the ACPI Fixed ACPI Description Table
(FADT).  Some additional ACPI values are defined in Acpi1_0.h and Acpi2_0.h.
All changes to the FADT contents should be done in this file.

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "Fadt.h"

EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE FADT = {
  EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE,
  sizeof (EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE),
  EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE_REVISION,
  0,                          // to make sum of entire table == 0
  EFI_ACPI_OEM_ID,            // OEMID is a 6 bytes long field
  EFI_ACPI_OEM_TABLE_ID,      // OEM table identification(8 bytes long)
  EFI_ACPI_OEM_REVISION,      // OEM revision number
  EFI_ACPI_CREATOR_ID,        // ASL compiler vendor ID
  EFI_ACPI_CREATOR_REVISION,  // ASL compiler revision number
  0,                     // Physical addesss of FACS
  0,                     // Physical address of DSDT
  INT_MODEL,             // System Interrupt Model
  RESERVED,              // reserved
  SCI_INT_VECTOR,        // System vector of SCI interrupt
  SMI_CMD_IO_PORT,       // Port address of SMI command port
  ACPI_ENABLE,           // value to write to port smi_cmd to enable ACPI
  ACPI_DISABLE,          // value to write to port smi_cmd to disable ACPI
  S4BIOS_REQ,            // Value to write to SMI CMD port to enter the S4BIOS state
  RESERVED,              // reserved - must be zero
  PM1a_EVT_BLK_ADDRESS,  // Port address of Power Mgt 1a Event Reg Blk
  PM1b_EVT_BLK_ADDRESS,  // Port address of Power Mgt 1b Event Reg Blk
  PM1a_CNT_BLK_ADDRESS,  // Port address of Power Mgt 1a Ctrl Reg Blk
  PM1b_CNT_BLK_ADDRESS,  // Port address of Power Mgt 1b Ctrl Reg Blk
  PM2_CNT_BLK_ADDRESS,   // Port address of Power Mgt 2  Ctrl Reg Blk
  PM_TMR_BLK_ADDRESS,    // Port address of Power Mgt Timer Ctrl Reg Blk
  GPE0_BLK_ADDRESS,      // Port addr of General Purpose Event 0 Reg Blk
  GPE1_BLK_ADDRESS,      // Port addr of General Purpose Event 1 Reg Blk
  PM1_EVT_LEN,           // Byte Length of ports at pm1X_evt_blk
  PM1_CNT_LEN,           // Byte Length of ports at pm1X_cnt_blk
  PM2_CNT_LEN,           // Byte Length of ports at pm2_cnt_blk
  PM_TM_LEN,             // Byte Length of ports at pm_tm_blk
  GPE0_BLK_LEN,          // Byte Length of ports at gpe0_blk
  GPE1_BLK_LEN,          // Byte Length of ports at gpe1_blk
  GPE1_BASE,             // offset in gpe model where gpe1 events start
  RESERVED,              // reserved
  P_LVL2_LAT,            // worst case HW latency to enter/exit C2 state
  P_LVL3_LAT,            // worst case HW latency to enter/exit C3 state
  FLUSH_SIZE,            // Size of area read to flush caches
  FLUSH_STRIDE,          // Stride used in flushing caches
  DUTY_OFFSET,           // bit location of duty cycle field in p_cnt reg
  DUTY_WIDTH,            // bit width of duty cycle field in p_cnt reg
  DAY_ALRM,              // index to day-of-month alarm in RTC CMOS RAM
  MON_ALRM,              // index to month-of-year alarm in RTC CMOS RAM
  CENTURY,               // index to century in RTC CMOS RAM
  RESERVED,              // reserved
  RESERVED,              // reserved
  RESERVED,              // reserved
  FLAG
};

VOID*
ReferenceAcpiTable (
  VOID
  )

{
  //
  // Reference the table being generated to prevent the optimizer from removing the
  // data structure from the exeutable
  //
  return (VOID*)&FADT;
}