| /** @file | |
| Contains all EFI_UDP6_PROTOCOL interfaces. | |
| Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "Udp6Impl.h" | |
| EFI_UDP6_PROTOCOL mUdp6Protocol = { | |
| Udp6GetModeData, | |
| Udp6Configure, | |
| Udp6Groups, | |
| Udp6Transmit, | |
| Udp6Receive, | |
| Udp6Cancel, | |
| Udp6Poll | |
| }; | |
| /** | |
| This function copies the current operational settings of this EFI UDPv6 Protocol | |
| instance into user-supplied buffers. This function is used optionally to retrieve | |
| the operational mode data of underlying networks or drivers. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[out] Udp6ConfigData The buffer in which the current UDP configuration | |
| data is returned. This parameter is optional and | |
| may be NULL. | |
| @param[out] Ip6ModeData The buffer in which the current EFI IPv6 Protocol | |
| mode data is returned. This parameter is optional | |
| and may be NULL. | |
| @param[out] MnpConfigData The buffer in which the current managed network | |
| configuration data is returned. This parameter is | |
| optional and may be NULL. | |
| @param[out] SnpModeData The buffer in which the simple network mode data | |
| is returned. This parameter is optional and may be NULL. | |
| @retval EFI_SUCCESS The mode data was read. | |
| @retval EFI_NOT_STARTED When Udp6ConfigData is queried, no configuration | |
| data is available because this instance has not | |
| been started. | |
| @retval EFI_INVALID_PARAMETER This is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6GetModeData ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| OUT EFI_UDP6_CONFIG_DATA *Udp6ConfigData OPTIONAL, | |
| OUT EFI_IP6_MODE_DATA *Ip6ModeData OPTIONAL, | |
| OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, | |
| OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL | |
| ) | |
| { | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_IP6_PROTOCOL *Ip; | |
| EFI_TPL OldTpl; | |
| EFI_STATUS Status; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured && (Udp6ConfigData != NULL)) { | |
| return EFI_NOT_STARTED; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| if (Udp6ConfigData != NULL) { | |
| // | |
| // Set the Udp6ConfigData. | |
| // | |
| CopyMem (Udp6ConfigData, &Instance->ConfigData, sizeof (EFI_UDP6_CONFIG_DATA)); | |
| } | |
| Ip = Instance->IpInfo->Ip.Ip6; | |
| // | |
| // Get the underlying Ip6ModeData, MnpConfigData and SnpModeData. | |
| // | |
| Status = Ip->GetModeData (Ip, Ip6ModeData, MnpConfigData, SnpModeData); | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| This function is used to do the following: | |
| Initialize and start this instance of the EFI UDPv6 Protocol. | |
| Change the filtering rules and operational parameters. | |
| Reset this instance of the EFI UDPv6 Protocol. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[in] UdpConfigData Pointer to the buffer to set the configuration | |
| data. This parameter is optional and may be NULL. | |
| @retval EFI_SUCCESS The configuration settings were set, changed, or | |
| reset successfully. | |
| @retval EFI_NO_MAPPING When the UdpConifgData.UseAnyStationAddress is set | |
| to true and there is no address available for the IP6 | |
| driver to bind a source address to this instance. | |
| @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: | |
| This is NULL. | |
| UdpConfigData.StationAddress is not a valid | |
| unicast IPv6 address. | |
| UdpConfigData.RemoteAddress is not a valid unicast | |
| IPv6 address if it is not zero. | |
| @retval EFI_ALREADY_STARTED The EFI UDPv6 Protocol instance is already | |
| started/configured and must be stopped/reset | |
| before it can be reconfigured. Only TrafficClass, | |
| HopLimit, ReceiveTimeout, and TransmitTimeout can | |
| be reconfigured without stopping the current | |
| instance of the EFI UDPv6 Protocol. | |
| @retval EFI_ACCESS_DENIED UdpConfigData.AllowDuplicatePort is FALSE and | |
| UdpConfigData.StationPort is already used by another | |
| instance. | |
| @retval EFI_OUT_OF_RESOURCES The EFI UDPv6 Protocol driver cannot allocate | |
| memory for this EFI UDPv6 Protocol instance. | |
| @retval EFI_DEVICE_ERROR An unexpected network or system error occurred, and | |
| this instance was not opened. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Configure ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| IN EFI_UDP6_CONFIG_DATA *UdpConfigData OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_INSTANCE_DATA *Instance; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| EFI_TPL OldTpl; | |
| EFI_IPv6_ADDRESS StationAddress; | |
| EFI_IPv6_ADDRESS RemoteAddress; | |
| EFI_IP6_CONFIG_DATA Ip6ConfigData; | |
| EFI_IPv6_ADDRESS LocalAddr; | |
| EFI_IPv6_ADDRESS RemoteAddr; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured && (UdpConfigData == NULL)) { | |
| return EFI_SUCCESS; | |
| } | |
| Udp6Service = Instance->Udp6Service; | |
| Status = EFI_SUCCESS; | |
| ASSERT (Udp6Service != NULL); | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| if (UdpConfigData != NULL) { | |
| IP6_COPY_ADDRESS (&StationAddress, &UdpConfigData->StationAddress); | |
| IP6_COPY_ADDRESS (&RemoteAddress, &UdpConfigData->RemoteAddress); | |
| if ((!NetIp6IsUnspecifiedAddr (&StationAddress) && !NetIp6IsValidUnicast (&StationAddress)) || | |
| (!NetIp6IsUnspecifiedAddr (&RemoteAddress) && !NetIp6IsValidUnicast (&RemoteAddress)) | |
| ){ | |
| // | |
| // If not use default address, and StationAddress is not a valid unicast | |
| // if it is not IPv6 address or RemoteAddress is not a valid unicast IPv6 | |
| // address if it is not 0. | |
| // | |
| Status = EFI_INVALID_PARAMETER; | |
| goto ON_EXIT; | |
| } | |
| if (Instance->Configured) { | |
| // | |
| // The instance is already configured, try to do the re-configuration. | |
| // | |
| if (!Udp6IsReconfigurable (&Instance->ConfigData, UdpConfigData)) { | |
| // | |
| // If the new configuration data wants to change some unreconfigurable | |
| // settings, return EFI_ALREADY_STARTED. | |
| // | |
| Status = EFI_ALREADY_STARTED; | |
| goto ON_EXIT; | |
| } | |
| // | |
| // Save the reconfigurable parameters. | |
| // | |
| Instance->ConfigData.TrafficClass = UdpConfigData->TrafficClass; | |
| Instance->ConfigData.HopLimit = UdpConfigData->HopLimit; | |
| Instance->ConfigData.ReceiveTimeout = UdpConfigData->ReceiveTimeout; | |
| Instance->ConfigData.TransmitTimeout = UdpConfigData->TransmitTimeout; | |
| } else { | |
| // | |
| // Construct the Ip configuration data from the UdpConfigData. | |
| // | |
| Udp6BuildIp6ConfigData (UdpConfigData, &Ip6ConfigData); | |
| // | |
| // Configure the Ip instance wrapped in the IpInfo. | |
| // | |
| Status = IpIoConfigIp (Instance->IpInfo, &Ip6ConfigData); | |
| if (EFI_ERROR (Status)) { | |
| if (Status == EFI_NO_MAPPING) { | |
| Instance->IsNoMapping = TRUE; | |
| } | |
| goto ON_EXIT; | |
| } | |
| Instance->IsNoMapping = FALSE; | |
| // | |
| // Save the configuration data. | |
| // | |
| CopyMem ( | |
| &Instance->ConfigData, | |
| UdpConfigData, | |
| sizeof (EFI_UDP6_CONFIG_DATA) | |
| ); | |
| IP6_COPY_ADDRESS (&Instance->ConfigData.StationAddress, &Ip6ConfigData.StationAddress); | |
| // | |
| // Try to allocate the required port resource. | |
| // | |
| Status = Udp6Bind (&Udp6Service->ChildrenList, &Instance->ConfigData); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Reset the ip instance if bind fails. | |
| // | |
| IpIoConfigIp (Instance->IpInfo, NULL); | |
| goto ON_EXIT; | |
| } | |
| // | |
| // Pre calculate the checksum for the pseudo head, ignore the UDP length first. | |
| // | |
| IP6_COPY_ADDRESS (&LocalAddr, &Instance->ConfigData.StationAddress); | |
| IP6_COPY_ADDRESS (&RemoteAddr, &Instance->ConfigData.RemoteAddress); | |
| Instance->HeadSum = NetIp6PseudoHeadChecksum ( | |
| &LocalAddr, | |
| &RemoteAddr, | |
| EFI_IP_PROTO_UDP, | |
| 0 | |
| ); | |
| Instance->Configured = TRUE; | |
| } | |
| } else { | |
| // | |
| // UdpConfigData is NULL, reset the instance. | |
| // | |
| Instance->Configured = FALSE; | |
| Instance->IsNoMapping = FALSE; | |
| // | |
| // Reset the Ip instance wrapped in the IpInfo. | |
| // | |
| IpIoConfigIp (Instance->IpInfo, NULL); | |
| // | |
| // Cancel all the user tokens. | |
| // | |
| Instance->Udp6Proto.Cancel (&Instance->Udp6Proto, NULL); | |
| // | |
| // Remove the buffered RxData for this instance. | |
| // | |
| Udp6FlushRcvdDgram (Instance); | |
| ASSERT (IsListEmpty (&Instance->DeliveredDgramQue)); | |
| } | |
| ON_EXIT: | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| This function is used to enable and disable the multicast group filtering. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[in] JoinFlag Set to TRUE to join a multicast group. Set to | |
| FALSE to leave one or all multicast groups. | |
| @param[in] MulticastAddress Pointer to multicast group address to join or | |
| leave. This parameter is optional and may be NULL. | |
| @retval EFI_SUCCESS The operation completed successfully. | |
| @retval EFI_NOT_STARTED The EFI UDPv6 Protocol instance has not been | |
| started. | |
| @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| This is NULL. | |
| JoinFlag is TRUE and MulticastAddress is NULL. | |
| JoinFlag is TRUE and *MulticastAddress is not a | |
| valid multicast address. | |
| @retval EFI_ALREADY_STARTED The group address is already in the group table | |
| (when JoinFlag is TRUE). | |
| @retval EFI_NOT_FOUND The group address is not in the group table (when | |
| JoinFlag is FALSE). | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Groups ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| IN BOOLEAN JoinFlag, | |
| IN EFI_IPv6_ADDRESS *MulticastAddress OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_IP6_PROTOCOL *Ip; | |
| EFI_TPL OldTpl; | |
| EFI_IPv6_ADDRESS *McastIp; | |
| if ((This == NULL) || (JoinFlag && (MulticastAddress == NULL))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| McastIp = NULL; | |
| if (JoinFlag) { | |
| if (!IP6_IS_MULTICAST (MulticastAddress)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| McastIp = AllocateCopyPool (sizeof (EFI_IPv6_ADDRESS), MulticastAddress); | |
| if (McastIp == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured) { | |
| return EFI_NOT_STARTED; | |
| } | |
| Ip = Instance->IpInfo->Ip.Ip6; | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| // | |
| // Invoke the Ip instance the Udp6 instance consumes to do the group operation. | |
| // | |
| Status = Ip->Groups (Ip, JoinFlag, MulticastAddress); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_EXIT; | |
| } | |
| // | |
| // Keep a local copy of the configured multicast IPs because IpIo receives | |
| // datagrams from the 0 station address IP instance and then UDP delivers to | |
| // the matched instance. This copy of multicast IPs is used to avoid receive | |
| // the mutlicast datagrams destinated to multicast IPs the other instances configured. | |
| // | |
| if (JoinFlag) { | |
| Status = NetMapInsertTail (&Instance->McastIps, (VOID *) McastIp, NULL); | |
| } else { | |
| NetMapIterate (&Instance->McastIps, Udp6LeaveGroup, MulticastAddress); | |
| } | |
| ON_EXIT: | |
| gBS->RestoreTPL (OldTpl); | |
| if (EFI_ERROR (Status)) { | |
| if (McastIp != NULL) { | |
| FreePool (McastIp); | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| This function places a sending request to this instance of the EFI UDPv6 Protocol, | |
| alongside the transmit data that was filled by the user. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[in] Token Pointer to the completion token that will be | |
| placed into the transmit queue. | |
| @retval EFI_SUCCESS The data was queued for transmission. | |
| @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been | |
| started. | |
| @retval EFI_NO_MAPPING The under-layer IPv6 driver was responsible for | |
| choosing a source address for this instance, but | |
| no source address was available for use. | |
| @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: | |
| This is NULL. | |
| Token is NULL. Token.Event is NULL. | |
| Token.Packet.TxData is NULL. | |
| Token.Packet.TxData.FragmentCount is zero. | |
| Token.Packet.TxData.DataLength is not equal to the | |
| sum of fragment lengths. | |
| One or more of the | |
| Token.Packet.TxData.FragmentTable[].FragmentLength | |
| fields is zero. | |
| One or more of the | |
| Token.Packet.TxData.FragmentTable[].FragmentBuffer | |
| fields is NULL. One or more of the | |
| Token.Packet.TxData.UdpSessionData.DestinationAddres | |
| are not valid unicast IPv6 | |
| addresses if the UdpSessionData is not NULL. | |
| Token.Packet.TxData.UdpSessionData. | |
| DestinationAddress is NULL | |
| Token.Packet.TxData.UdpSessionData. | |
| DestinatioPort | |
| is zero. | |
| Token.Packet.TxData.UdpSessionData is NULL and this | |
| instance's UdpConfigData.RemoteAddress is unspecified. | |
| @retval EFI_ACCESS_DENIED The transmit completion token with the same | |
| Token.Event is already in the transmit queue. | |
| @retval EFI_NOT_READY The completion token could not be queued because | |
| the transmit queue is full. | |
| @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. | |
| @retval EFI_NOT_FOUND There is no route to the destination network or | |
| address. | |
| @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP | |
| packet size. Or, the length of the IP header + UDP | |
| header + data length is greater than MTU if | |
| DoNotFragment is TRUE. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Transmit ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| IN EFI_UDP6_COMPLETION_TOKEN *Token | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_TPL OldTpl; | |
| NET_BUF *Packet; | |
| EFI_UDP_HEADER *Udp6Header; | |
| EFI_UDP6_CONFIG_DATA *ConfigData; | |
| EFI_IPv6_ADDRESS Source; | |
| EFI_IPv6_ADDRESS Destination; | |
| EFI_UDP6_TRANSMIT_DATA *TxData; | |
| EFI_UDP6_SESSION_DATA *UdpSessionData; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| IP_IO_OVERRIDE Override; | |
| UINT16 HeadSum; | |
| EFI_IP_ADDRESS IpDestAddr; | |
| if ((This == NULL) || (Token == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured) { | |
| return EFI_NOT_STARTED; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| // | |
| // Validate the Token, if the token is invalid return the error code. | |
| // | |
| Status = Udp6ValidateTxToken (Instance, Token); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_EXIT; | |
| } | |
| if (EFI_ERROR (NetMapIterate (&Instance->TxTokens, Udp6TokenExist, Token)) || | |
| EFI_ERROR (NetMapIterate (&Instance->RxTokens, Udp6TokenExist, Token)) | |
| ){ | |
| // | |
| // Try to find a duplicate token in the two token maps, if found, return | |
| // EFI_ACCESS_DENIED. | |
| // | |
| Status = EFI_ACCESS_DENIED; | |
| goto ON_EXIT; | |
| } | |
| TxData = Token->Packet.TxData; | |
| // | |
| // Create a net buffer to hold the user buffer and the udp header. | |
| // | |
| Packet = NetbufFromExt ( | |
| (NET_FRAGMENT *) TxData->FragmentTable, | |
| TxData->FragmentCount, | |
| UDP6_HEADER_SIZE, | |
| 0, | |
| Udp6NetVectorExtFree, | |
| NULL | |
| ); | |
| if (Packet == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto ON_EXIT; | |
| } | |
| // | |
| // Store the IpIo in ProtoData. | |
| // | |
| Udp6Service = Instance->Udp6Service; | |
| *((UINTN *) &Packet->ProtoData[0]) = (UINTN) (Udp6Service->IpIo); | |
| Udp6Header = (EFI_UDP_HEADER *) NetbufAllocSpace (Packet, UDP6_HEADER_SIZE, TRUE); | |
| ASSERT (Udp6Header != NULL); | |
| ConfigData = &Instance->ConfigData; | |
| // | |
| // Fill the udp header. | |
| // | |
| Udp6Header->SrcPort = HTONS (ConfigData->StationPort); | |
| Udp6Header->DstPort = HTONS (ConfigData->RemotePort); | |
| Udp6Header->Length = HTONS ((UINT16) Packet->TotalSize); | |
| Udp6Header->Checksum = 0; | |
| // | |
| // Set the UDP Header in NET_BUF, this UDP header is for IP6 can fast get the | |
| // Udp header for pseudoHeadCheckSum. | |
| // | |
| Packet->Udp = Udp6Header; | |
| UdpSessionData = TxData->UdpSessionData; | |
| if (UdpSessionData != NULL) { | |
| // | |
| // Set the Destination according to the specified | |
| // UdpSessionData. | |
| // | |
| if (UdpSessionData->DestinationPort != 0) { | |
| Udp6Header->DstPort = HTONS (UdpSessionData->DestinationPort); | |
| } | |
| IP6_COPY_ADDRESS (&Source, &ConfigData->StationAddress); | |
| if (!NetIp6IsUnspecifiedAddr (&UdpSessionData->DestinationAddress)) { | |
| IP6_COPY_ADDRESS (&Destination, &UdpSessionData->DestinationAddress); | |
| } else { | |
| IP6_COPY_ADDRESS (&Destination, &ConfigData->RemoteAddress); | |
| } | |
| // | |
| //Calculate the pseudo head checksum using the overridden parameters. | |
| // | |
| if (!NetIp6IsUnspecifiedAddr (&ConfigData->StationAddress)) { | |
| HeadSum = NetIp6PseudoHeadChecksum ( | |
| &Source, | |
| &Destination, | |
| EFI_IP_PROTO_UDP, | |
| 0 | |
| ); | |
| // | |
| // calculate the checksum. | |
| // | |
| Udp6Header->Checksum = Udp6Checksum (Packet, HeadSum); | |
| if (Udp6Header->Checksum == 0) { | |
| // | |
| // If the calculated checksum is 0, fill the Checksum field with all ones. | |
| // | |
| Udp6Header->Checksum = 0XFFFF; | |
| } | |
| } else { | |
| // | |
| // Set the checksum is zero if the ConfigData->StationAddress is unspcified | |
| // and the Ipv6 will fill the correct value of this checksum. | |
| // | |
| Udp6Header->Checksum = 0; | |
| } | |
| } else { | |
| // | |
| // UdpSessionData is NULL, use the address and port information previously configured. | |
| // | |
| IP6_COPY_ADDRESS (&Destination, &ConfigData->RemoteAddress); | |
| HeadSum = Instance->HeadSum; | |
| // | |
| // calculate the checksum. | |
| // | |
| Udp6Header->Checksum = Udp6Checksum (Packet, HeadSum); | |
| if (Udp6Header->Checksum == 0) { | |
| // | |
| // If the calculated checksum is 0, fill the Checksum field with all ones. | |
| // | |
| Udp6Header->Checksum = 0xffff; | |
| } | |
| } | |
| // | |
| // Fill the IpIo Override data. | |
| // | |
| Override.Ip6OverrideData.Protocol = EFI_IP_PROTO_UDP; | |
| Override.Ip6OverrideData.HopLimit = ConfigData->HopLimit; | |
| Override.Ip6OverrideData.FlowLabel = 0; | |
| // | |
| // Save the token into the TxToken map. | |
| // | |
| Status = NetMapInsertTail (&Instance->TxTokens, Token, Packet); | |
| if (EFI_ERROR (Status)) { | |
| goto FREE_PACKET; | |
| } | |
| // | |
| // Send out this datagram through IpIo. | |
| // | |
| if (UdpSessionData != NULL){ | |
| IP6_COPY_ADDRESS (&(IpDestAddr.v6), &Destination); | |
| } else { | |
| ZeroMem (&IpDestAddr.v6, sizeof (EFI_IPv6_ADDRESS)); | |
| } | |
| Status = IpIoSend ( | |
| Udp6Service->IpIo, | |
| Packet, | |
| Instance->IpInfo, | |
| Instance, | |
| Token, | |
| &IpDestAddr, | |
| &Override | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Remove this token from the TxTokens. | |
| // | |
| Udp6RemoveToken (&Instance->TxTokens, Token); | |
| } | |
| FREE_PACKET: | |
| NetbufFree (Packet); | |
| ON_EXIT: | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| This function places a completion token into the receive packet queue. This function | |
| is always asynchronous. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[in] Token Pointer to a token that is associated with the | |
| receive data descriptor. | |
| @retval EFI_SUCCESS The receive completion token was cached. | |
| @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been | |
| started. | |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, | |
| BOOTP, RARP, etc.) is not finished yet. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| This is NULL. Token is NULL. Token.Event is NULL. | |
| @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued | |
| due to a lack of system resources (usually | |
| memory). | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| The EFI UDPv6 Protocol instance has been reset to | |
| startup defaults. | |
| @retval EFI_ACCESS_DENIED A receive completion token with the same | |
| Token.Event is already in the receive queue. | |
| @retval EFI_NOT_READY The receive request could not be queued because | |
| the receive queue is full. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Receive ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| IN EFI_UDP6_COMPLETION_TOKEN *Token | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_TPL OldTpl; | |
| if ((This == NULL) || (Token == NULL) || (Token->Event == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured) { | |
| return EFI_NOT_STARTED; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| if (EFI_ERROR (NetMapIterate (&Instance->RxTokens, Udp6TokenExist, Token)) || | |
| EFI_ERROR (NetMapIterate (&Instance->TxTokens, Udp6TokenExist, Token)) | |
| ){ | |
| // | |
| // Return EFI_ACCESS_DENIED if the specified token is already in the TxTokens or | |
| // RxTokens map. | |
| // | |
| Status = EFI_ACCESS_DENIED; | |
| goto ON_EXIT; | |
| } | |
| Token->Packet.RxData = NULL; | |
| // | |
| // Save the token into the RxTokens map. | |
| // | |
| Status = NetMapInsertTail (&Instance->RxTokens, Token, NULL); | |
| if (EFI_ERROR (Status)) { | |
| Status = EFI_NOT_READY; | |
| goto ON_EXIT; | |
| } | |
| // | |
| // If there is an icmp error, report it. | |
| // | |
| Udp6ReportIcmpError (Instance); | |
| // | |
| // Try to delivered the received datagrams. | |
| // | |
| Udp6InstanceDeliverDgram (Instance); | |
| // | |
| // Dispatch the DPC queued by the NotifyFunction of Token->Event. | |
| // | |
| DispatchDpc (); | |
| ON_EXIT: | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| This function is used to abort a pending transmit or receive request. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @param[in] Token Pointer to a token that has been issued by | |
| EFI_UDP6_PROTOCOL.Transmit() or | |
| EFI_UDP6_PROTOCOL.Receive(). This parameter is | |
| optional and may be NULL. | |
| @retval EFI_SUCCESS The asynchronous I/O request was aborted, and | |
| Token.Event was signaled. When Token is NULL, all | |
| pending requests are aborted and their events are | |
| signaled. | |
| @retval EFI_INVALID_PARAMETER This is NULL. | |
| @retval EFI_NOT_STARTED This instance has not been started. | |
| @retval EFI_NO_MAPPING When using the default address, configuration | |
| (DHCP, BOOTP, RARP, etc.) is not finished yet. | |
| @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O | |
| request is not found in the transmit or receive | |
| queue. It is either completed or not issued by | |
| Transmit() or Receive(). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Cancel ( | |
| IN EFI_UDP6_PROTOCOL *This, | |
| IN EFI_UDP6_COMPLETION_TOKEN *Token OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_TPL OldTpl; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| if (!Instance->Configured) { | |
| return EFI_NOT_STARTED; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| // | |
| // Cancle the tokens specified by Token for this instance. | |
| // | |
| Status = Udp6InstanceCancelToken (Instance, Token); | |
| // | |
| // Dispatch the DPC queued by the NotifyFunction of the canceled token's events. | |
| // | |
| DispatchDpc (); | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| This function can be used by network drivers and applications to increase the rate that | |
| data packets are moved between the communications device and the transmit/receive queues. | |
| @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. | |
| @retval EFI_SUCCESS Incoming or outgoing data was processed. | |
| @retval EFI_INVALID_PARAMETER This is NULL. | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| @retval EFI_TIMEOUT Data was dropped out of the transmit and/or | |
| receive queue. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6Poll ( | |
| IN EFI_UDP6_PROTOCOL *This | |
| ) | |
| { | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_IP6_PROTOCOL *Ip; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (This); | |
| Ip = Instance->IpInfo->Ip.Ip6; | |
| // | |
| // Invode the Ip instance consumed by the udp instance to do the poll operation. | |
| // | |
| return Ip->Poll (Ip); | |
| } |