/** @file | |
String definitions for the Shell IpSecConfig application. | |
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials | |
are licensed and made available under the terms and conditions of the BSD License | |
which accompanies this distribution. The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php. | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
**/ | |
#langdef en-US "English" | |
#string STR_IPSEC_CONFIG_UNKNOWN_OPERATION #language en-US "%s: Operation not specified.\n" | |
#string STR_IPSEC_CONFIG_INCORRECT_DB #language en-US "%s: Incorrect Database - %s.\n" | |
#string STR_IPSEC_CONFIG_PROTOCOL_INEXISTENT #language en-US "%s: IPSEC_CONFIG protocol inexistent.\n" | |
#string STR_IPSEC_CONFIG_MISSING_DB #language en-US "%s: Missing Database.\n" | |
#string STR_IPSEC_CONFIG_FILE_OPEN_FAILED #language en-US "%s: Open file failed - %s.\n" | |
#string STR_IPSEC_CONFIG_INCORRECT_PARAMETER_VALUE #language en-US "%s: Incorrect value of %s - %s.\n" | |
#string STR_IPSEC_CONFIG_ACCEPT_PARAMETERS #language en-US " Values could be:" | |
#string STR_IPSEC_CONFIG_MISSING_PARAMETER #language en-US "%s: Missing parameter - %s.\n" | |
#string STR_IPSEC_CONFIG_MISSING_ONE_OF_PARAMETERS #language en-US "%s: Missing one of the parameters - %s.\n" | |
#string STR_IPSEC_CONFIG_UNWANTED_PARAMETER #language en-US "%s: Unwanted parameter - %s.\n" | |
#string STR_IPSEC_CONFIG_INSERT_FAILED #language en-US "%s: Policy entry insertion failed!\n" | |
#string STR_IPSEC_CONFIG_DELETE_FAILED #language en-US "%s: Policy entry deletion failed!\n" | |
#string STR_IPSEC_CONFIG_EDIT_FAILED #language en-US "%s: Policy entry edit failed!\n" | |
#string STR_IPSEC_CONFIG_ALREADY_EXISTS #language en-US "%s: Policy entry already exists!\n" | |
#string STR_IPSEC_CONFIG_INDEX_NOT_FOUND #language en-US "%s: Specified index not found!\n" | |
#string STR_IPSEC_CONFIG_INDEX_NOT_SPECIFIED #language en-US "%s: Index should be Specified!\n" | |
#string STR_IPSEC_CONFIG_INSERT_UNSUPPORT #language en-US "%s: Policy entry insertion not supported!\n" | |
#string STR_IPSEC_CONFIG_LINE_HELP #language en-US "Displays or modifies the IPsec configuration" | |
#string STR_IPSEC_CONFIG_HELP #language en-US "Displays or modifies the current IPsec configuration.\n" | |
"%HUsage: IpSecConfig [-p {SPD|SAD|PAD}] [command] [options[parameters]]%N\n" | |
"\n" | |
"%H-p (SPD|SAD|PAD)%N required.point to certain policy database.\n" | |
"%Hcommand%N:\n" | |
" -a [options[parameters]] Add new policy entry.\n" | |
" -i entryid [options[parameters]] Insert new policy entry before the one\n" | |
" matched by the entryid.\n" | |
" It's only supported on SPD policy database.\n" | |
" -d entryid Delete the policy entry matched by the \n" | |
" entryid.\n" | |
" -e entryid [options[parameters]] Edit the policy entry matched by the\n" | |
" entryid.\n" | |
" -f Flush the entire policy database.\n" | |
" -l List all entries for specified database.\n" | |
" -enable Enable IPsec.\n" | |
" -disable Disable IPsec.\n" | |
" -status Show IPsec current status.\n" | |
"%H[options[parametes]]%N depend on the type of policy database.Type\n " | |
" 'IpSecConfig -p'followed by the database \n" | |
" name, and then type ' -?'.\n" | |
" e.g.: 'IpSecConfig -p SPD -?'\n" | |
#string STR_IPSEC_CONFIG_SPD_HELP #language en-US "Explain the %H[options[parametes]%N for %HSPD%N\n" | |
"\n" | |
"%H[options[parameters]]%N:\n" | |
" --local localaddress optional local address\n" | |
" --remote remoteaddress required remote address\n" | |
" --proto (TCP|UDP|ICMP|...) required IP protocol\n" | |
" --local-port port optional local port for tcp/udp protocol\n" | |
" --remote-port port optional remote port for tcp/udp protocol\n" | |
" --name name optional SPD name\n" | |
" --action (Bypass|Discard|Protect) required \n" | |
" required IPsec action\n" | |
" --mode (Transport|Tunnel) optional IPsec mode, transport by default\n" | |
" --ipsec-proto (AH|ESP) optional IPsec protocol, ESP by default\n" | |
" --auth-algo (NONE|SHA1HMAC) optional authentication algorithm\n" | |
" --encrypt-algo(NONE|DESCBC|3DESCBC)optional encryption algorithm\n" | |
" --tunnel-local tunnellocaladdr optional tunnel local address(only for tunnel mode)\n" | |
" --tunnel-remote tunnelremoteaddr optional tunnel remote address(only for tunnel mode)\n" | |
"\n" | |
#string STR_IPSEC_CONFIG_SAD_HELP #language en-US "Explain the %H[options[parameters]]%N for %HSAD%N\n" | |
"\n" | |
"%H[options[parameters]]%N:\n" | |
" --spi spi required SPI value\n" | |
" --ipsec-proto (AH|ESP) required IPsec protocol\n" | |
" --local localaddress optional local address\n" | |
" --remote remoteaddress required destination address\n" | |
" --auth-algo (NONE|SHA1HMAC) required for AH. authentication algorithm\n" | |
" --auth-key key required for AH. key for authentication\n" | |
" --encrypt-algo (NONE|DESCBC|3DESCBC) required for ESP. encryption algorithm\n" | |
" --encrypt-key key required for ESP. key for encryption\n" | |
" --mode (Transport|Tunnel) optional IPsec mode, transport by default\n" | |
" --tunnel-dest tunneldestaddr optional tunnel destination address(only for tunnel mode)\n" | |
" --tunnel-source tunnelsourceaddr optional tunnel source address(only for tunnel mode)\n" | |
"\n" | |
#string STR_IPSEC_CONFIG_PAD_HELP #language en-US "Explain the %H[options[parameters]]%N for %HPAD%N\n" | |
"\n" | |
"%H[options[parameters]]%N:\n" | |
" --peer-address address required peer address\n" | |
" --auth-proto (IKEv1|IKEv2) optional IKE protocol, IKEv1 by\n" | |
" default\n" | |
" --auth-method (PreSharedSecret|Certificates) required authentication method\n" | |
" --auth-data authdata required data for authentication\n" | |
"\n" | |
#string STR_IPSEC_MISTAKEN_OPTIONS #language en-US "Mistaken Input. Please refer to %H"IpSecConfig -?"%N for more help information.\n" | |
#string STR_IPSEC_REDUNDANCY_MANY #language en-US "%s has one redundancy option: %H%s%N\n" | |
#string STR_IPSEC_CONFIG_ALREADY_ENABLE #language en-US "IPsec has been already enabled!\n" | |
#string STR_IPSEC_CONFIG_ENABLE_SUCCESS #language en-US "Enable IPsec ! \n" | |
#string STR_IPSEC_CONFIG_DISABLE_SUCCESS #language en-US "Disable IPsec ! \n" | |
#string STR_IPSEC_CONFIG_ALREADY_DISABLE #language en-US "IPsec has been already disabled !\n" | |
#string STR_IPSEC_CONFIG_STATUS_ENABLE #language en-US "IPsec Status : Enabled ! \n" | |
#string STR_IPSEC_CONFIG_STATUS_DISABLE #language en-US "IPsec Status : Disabled ! \n" | |
#string STR_IPSEC_CONFIG_ENABLE_FAILED #language en-US "Error: Enable IPsec failed !\n" | |
#string STR_IPSEC_CONFIG_DISABLE_FAILED #language en-US "Error: Disable IPsec failed !\n" | |