AppPkg/Applications/Python/Python-2.7.2/Modules/getpath.c - edk2 - Git at Google

 /* Return the initial module search path. */

 #include "Python.h"
 #include "osdefs.h"

 #include <sys/types.h>
 #include <string.h>

 #ifdef __APPLE__
 #include <mach-o/dyld.h>
 #endif

 /* Search in some common locations for the associated Python libraries.
  *
  * Two directories must be found, the platform independent directory
  * (prefix), containing the common .py and .pyc files, and the platform
  * dependent directory (exec_prefix), containing the shared library
  * modules.  Note that prefix and exec_prefix can be the same directory,
  * but for some installations, they are different.
  *
  * Py_GetPath() carries out separate searches for prefix and exec_prefix.
  * Each search tries a number of different locations until a ``landmark''
  * file or directory is found.  If no prefix or exec_prefix is found, a
  * warning message is issued and the preprocessor defined PREFIX and
  * EXEC_PREFIX are used (even though they will not work); python carries on
  * as best as is possible, but most imports will fail.
  *
  * Before any searches are done, the location of the executable is
  * determined.  If argv[0] has one or more slashes in it, it is used
  * unchanged.  Otherwise, it must have been invoked from the shell's path,
  * so we search $PATH for the named executable and use that.  If the
  * executable was not found on $PATH (or there was no $PATH environment
  * variable), the original argv[0] string is used.
  *
  * Next, the executable location is examined to see if it is a symbolic
  * link.  If so, the link is chased (correctly interpreting a relative
  * pathname if one is found) and the directory of the link target is used.
  *
  * Finally, argv0_path is set to the directory containing the executable
  * (i.e. the last component is stripped).
  *
  * With argv0_path in hand, we perform a number of steps.  The same steps
  * are performed for prefix and for exec_prefix, but with a different
  * landmark.
  *
  * Step 1. Are we running python out of the build directory?  This is
  * checked by looking for a different kind of landmark relative to
  * argv0_path.  For prefix, the landmark's path is derived from the VPATH
  * preprocessor variable (taking into account that its value is almost, but
  * not quite, what we need).  For exec_prefix, the landmark is
  * Modules/Setup.  If the landmark is found, we're done.
  *
  * For the remaining steps, the prefix landmark will always be
  * lib/python$VERSION/os.py and the exec_prefix will always be
  * lib/python$VERSION/lib-dynload, where $VERSION is Python's version
  * number as supplied by the Makefile.  Note that this means that no more
  * build directory checking is performed; if the first step did not find
  * the landmarks, the assumption is that python is running from an
  * installed setup.
  *
  * Step 2. See if the $PYTHONHOME environment variable points to the
  * installed location of the Python libraries.  If $PYTHONHOME is set, then
  * it points to prefix and exec_prefix.  $PYTHONHOME can be a single
  * directory, which is used for both, or the prefix and exec_prefix
  * directories separated by a colon.
  *
  * Step 3. Try to find prefix and exec_prefix relative to argv0_path,
  * backtracking up the path until it is exhausted.  This is the most common
  * step to succeed.  Note that if prefix and exec_prefix are different,
  * exec_prefix is more likely to be found; however if exec_prefix is a
  * subdirectory of prefix, both will be found.
  *
  * Step 4. Search the directories pointed to by the preprocessor variables
  * PREFIX and EXEC_PREFIX.  These are supplied by the Makefile but can be
  * passed in as options to the configure script.
  *
  * That's it!
  *
  * Well, almost.  Once we have determined prefix and exec_prefix, the
  * preprocessor variable PYTHONPATH is used to construct a path.  Each
  * relative path on PYTHONPATH is prefixed with prefix.  Then the directory
  * containing the shared library modules is appended.  The environment
  * variable $PYTHONPATH is inserted in front of it all.  Finally, the
  * prefix and exec_prefix globals are tweaked so they reflect the values
  * expected by other code, by stripping the "lib/python$VERSION/..." stuff
  * off.  If either points to the build directory, the globals are reset to
  * the corresponding preprocessor variables (so sys.prefix will reflect the
  * installation location, even though sys.path points into the build
  * directory).  This seems to make more sense given that currently the only
  * known use of sys.prefix and sys.exec_prefix is for the ILU installation
  * process to find the installed Python tree.
  */

 #ifdef __cplusplus
  extern "C" {
 #endif


 #ifndef VERSION
 #define VERSION "2.1"
 #endif

 #ifndef VPATH
 #define VPATH "."
 #endif

 #ifndef PREFIX
 #  ifdef __VMS
 #    define PREFIX ""
 #  else
 #    define PREFIX "/usr/local"
 #  endif
 #endif

 #ifndef EXEC_PREFIX
 #define EXEC_PREFIX PREFIX
 #endif

 #ifndef PYTHONPATH
 #define PYTHONPATH PREFIX "/lib/python" VERSION ":" \
               EXEC_PREFIX "/lib/python" VERSION "/lib-dynload"
 #endif

 #ifndef LANDMARK
 #define LANDMARK "os.py"
 #endif

 static char prefix[MAXPATHLEN+1];
 static char exec_prefix[MAXPATHLEN+1];
 static char progpath[MAXPATHLEN+1];
 static char *module_search_path = NULL;
 static char lib_python[] = "lib/python" VERSION;

 static void
 reduce(char *dir)
 {
     size_t i = strlen(dir);
     while (i > 0 && dir[i] != SEP)
         --i;
     dir[i] = '\0';
 }


 static int
 isfile(char *filename)          /* Is file, not directory */
 {
     struct stat buf;
     if (stat(filename, &buf) != 0)
         return 0;
     if (!S_ISREG(buf.st_mode))
         return 0;
     return 1;
 }


 static int
 ismodule(char *filename)        /* Is module -- check for .pyc/.pyo too */
 {
     if (isfile(filename))
         return 1;

     /* Check for the compiled version of prefix. */
     if (strlen(filename) < MAXPATHLEN) {
         strcat(filename, Py_OptimizeFlag ? "o" : "c");
         if (isfile(filename))
             return 1;
     }
     return 0;
 }


 static int
 isxfile(char *filename)         /* Is executable file */
 {
     struct stat buf;
     if (stat(filename, &buf) != 0)
         return 0;
     if (!S_ISREG(buf.st_mode))
         return 0;
     if ((buf.st_mode & 0111) == 0)
         return 0;
     return 1;
 }


 static int
 isdir(char *filename)                   /* Is directory */
 {
     struct stat buf;
     if (stat(filename, &buf) != 0)
         return 0;
     if (!S_ISDIR(buf.st_mode))
         return 0;
     return 1;
 }


 /* Add a path component, by appending stuff to buffer.
    buffer must have at least MAXPATHLEN + 1 bytes allocated, and contain a
    NUL-terminated string with no more than MAXPATHLEN characters (not counting
    the trailing NUL).  It's a fatal error if it contains a string longer than
    that (callers must be careful!).  If these requirements are met, it's
    guaranteed that buffer will still be a NUL-terminated string with no more
    than MAXPATHLEN characters at exit.  If stuff is too long, only as much of
    stuff as fits will be appended.
 */
 static void
 joinpath(char *buffer, char *stuff)
 {
     size_t n, k;
     if (stuff[0] == SEP)
         n = 0;
     else {
         n = strlen(buffer);
         if (n > 0 && buffer[n-1] != SEP && n < MAXPATHLEN)
             buffer[n++] = SEP;
     }
     if (n > MAXPATHLEN)
         Py_FatalError("buffer overflow in getpath.c's joinpath()");
     k = strlen(stuff);
     if (n + k > MAXPATHLEN)
         k = MAXPATHLEN - n;
     strncpy(buffer+n, stuff, k);
     buffer[n+k] = '\0';
 }

 /* copy_absolute requires that path be allocated at least
    MAXPATHLEN + 1 bytes and that p be no more than MAXPATHLEN bytes. */
 static void
 copy_absolute(char *path, char *p)
 {
     if (p[0] == SEP)
         strcpy(path, p);
     else {
         if (!getcwd(path, MAXPATHLEN)) {
             /* unable to get the current directory */
             strcpy(path, p);
             return;
         }
         if (p[0] == '.' && p[1] == SEP)
             p += 2;
         joinpath(path, p);
     }
 }

 /* absolutize() requires that path be allocated at least MAXPATHLEN+1 bytes. */
 static void
 absolutize(char *path)
 {
     char buffer[MAXPATHLEN + 1];

     if (path[0] == SEP)
         return;
     copy_absolute(buffer, path);
     strcpy(path, buffer);
 }

 /* search_for_prefix requires that argv0_path be no more than MAXPATHLEN
    bytes long.
 */
 static int
 search_for_prefix(char *argv0_path, char *home)
 {
     size_t n;
     char *vpath;

     /* If PYTHONHOME is set, we believe it unconditionally */
     if (home) {
         char *delim;
         strncpy(prefix, home, MAXPATHLEN);
         delim = strchr(prefix, DELIM);
         if (delim)
             *delim = '\0';
         joinpath(prefix, lib_python);
         joinpath(prefix, LANDMARK);
         return 1;
     }

     /* Check to see if argv[0] is in the build directory */
     strcpy(prefix, argv0_path);
     joinpath(prefix, "Modules/Setup");
     if (isfile(prefix)) {
         /* Check VPATH to see if argv0_path is in the build directory. */
         vpath = VPATH;
         strcpy(prefix, argv0_path);
         joinpath(prefix, vpath);
         joinpath(prefix, "Lib");
         joinpath(prefix, LANDMARK);
         if (ismodule(prefix))
             return -1;
     }

     /* Search from argv0_path, until root is found */
     copy_absolute(prefix, argv0_path);
     do {
         n = strlen(prefix);
         joinpath(prefix, lib_python);
         joinpath(prefix, LANDMARK);
         if (ismodule(prefix))
             return 1;
         prefix[n] = '\0';
         reduce(prefix);
     } while (prefix[0]);

     /* Look at configure's PREFIX */
     strncpy(prefix, PREFIX, MAXPATHLEN);
     joinpath(prefix, lib_python);
     joinpath(prefix, LANDMARK);
     if (ismodule(prefix))
         return 1;

     /* Fail */
     return 0;
 }


 /* search_for_exec_prefix requires that argv0_path be no more than
    MAXPATHLEN bytes long.
 */
 static int
 search_for_exec_prefix(char *argv0_path, char *home)
 {
     size_t n;

     /* If PYTHONHOME is set, we believe it unconditionally */
     if (home) {
         char *delim;
         delim = strchr(home, DELIM);
         if (delim)
             strncpy(exec_prefix, delim+1, MAXPATHLEN);
         else
             strncpy(exec_prefix, home, MAXPATHLEN);
         joinpath(exec_prefix, lib_python);
         joinpath(exec_prefix, "lib-dynload");
         return 1;
     }

     /* Check to see if argv[0] is in the build directory */
     strcpy(exec_prefix, argv0_path);
     joinpath(exec_prefix, "Modules/Setup");
     if (isfile(exec_prefix)) {
         reduce(exec_prefix);
         return -1;
     }

     /* Search from argv0_path, until root is found */
     copy_absolute(exec_prefix, argv0_path);
     do {
         n = strlen(exec_prefix);
         joinpath(exec_prefix, lib_python);
         joinpath(exec_prefix, "lib-dynload");
         if (isdir(exec_prefix))
             return 1;
         exec_prefix[n] = '\0';
         reduce(exec_prefix);
     } while (exec_prefix[0]);

     /* Look at configure's EXEC_PREFIX */
     strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
     joinpath(exec_prefix, lib_python);
     joinpath(exec_prefix, "lib-dynload");
     if (isdir(exec_prefix))
         return 1;

     /* Fail */
     return 0;
 }


 static void
 calculate_path(void)
 {
     extern char *Py_GetProgramName(void);

     static char delimiter[2] = {DELIM, '\0'};
     static char separator[2] = {SEP, '\0'};
     char *pythonpath = PYTHONPATH;
     char *rtpypath = Py_GETENV("PYTHONPATH");
     char *home = Py_GetPythonHome();
     char *path = getenv("PATH");
     char *prog = Py_GetProgramName();
     char argv0_path[MAXPATHLEN+1];
     char zip_path[MAXPATHLEN+1];
     int pfound, efound; /* 1 if found; -1 if found build directory */
     char *buf;
     size_t bufsz;
     size_t prefixsz;
     char *defpath = pythonpath;
 #ifdef WITH_NEXT_FRAMEWORK
     NSModule pythonModule;
 #endif
 #ifdef __APPLE__
 #if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_4
     uint32_t nsexeclength = MAXPATHLEN;
 #else
     unsigned long nsexeclength = MAXPATHLEN;
 #endif
 #endif

         /* If there is no slash in the argv0 path, then we have to
          * assume python is on the user's $PATH, since there's no
          * other way to find a directory to start the search from.  If
          * $PATH isn't exported, you lose.
          */
         if (strchr(prog, SEP))
                 strncpy(progpath, prog, MAXPATHLEN);
 #ifdef __APPLE__
      /* On Mac OS X, if a script uses an interpreter of the form
       * "#!/opt/python2.3/bin/python", the kernel only passes "python"
       * as argv[0], which falls through to the $PATH search below.
       * If /opt/python2.3/bin isn't in your path, or is near the end,
       * this algorithm may incorrectly find /usr/bin/python. To work
       * around this, we can use _NSGetExecutablePath to get a better
       * hint of what the intended interpreter was, although this
       * will fail if a relative path was used. but in that case,
       * absolutize() should help us out below
       */
      else if(0 == _NSGetExecutablePath(progpath, &nsexeclength) && progpath[0] == SEP)
        ;
 #endif /* __APPLE__ */
         else if (path) {
                 while (1) {
                         char *delim = strchr(path, DELIM);

                         if (delim) {
                                 size_t len = delim - path;
                                 if (len > MAXPATHLEN)
                                         len = MAXPATHLEN;
                                 strncpy(progpath, path, len);
                                 *(progpath + len) = '\0';
                         }
                         else
                                 strncpy(progpath, path, MAXPATHLEN);

                         joinpath(progpath, prog);
                         if (isxfile(progpath))
                                 break;

                         if (!delim) {
                                 progpath[0] = '\0';
                                 break;
                         }
                         path = delim + 1;
                 }
         }
         else
                 progpath[0] = '\0';
         if (progpath[0] != SEP && progpath[0] != '\0')
                 absolutize(progpath);
         strncpy(argv0_path, progpath, MAXPATHLEN);
         argv0_path[MAXPATHLEN] = '\0';

 #ifdef WITH_NEXT_FRAMEWORK
         /* On Mac OS X we have a special case if we're running from a framework.
         ** This is because the python home should be set relative to the library,
         ** which is in the framework, not relative to the executable, which may
         ** be outside of the framework. Except when we're in the build directory...
         */
     pythonModule = NSModuleForSymbol(NSLookupAndBindSymbol("_Py_Initialize"));
     /* Use dylib functions to find out where the framework was loaded from */
     buf = (char *)NSLibraryNameForModule(pythonModule);
     if (buf != NULL) {
         /* We're in a framework. */
         /* See if we might be in the build directory. The framework in the
         ** build directory is incomplete, it only has the .dylib and a few
         ** needed symlinks, it doesn't have the Lib directories and such.
         ** If we're running with the framework from the build directory we must
         ** be running the interpreter in the build directory, so we use the
         ** build-directory-specific logic to find Lib and such.
         */
         strncpy(argv0_path, buf, MAXPATHLEN);
         reduce(argv0_path);
         joinpath(argv0_path, lib_python);
         joinpath(argv0_path, LANDMARK);
         if (!ismodule(argv0_path)) {
                 /* We are in the build directory so use the name of the
                    executable - we know that the absolute path is passed */
                 strncpy(argv0_path, progpath, MAXPATHLEN);
         }
         else {
                 /* Use the location of the library as the progpath */
                 strncpy(argv0_path, buf, MAXPATHLEN);
         }
     }
 #endif

 #if HAVE_READLINK
     {
         char tmpbuffer[MAXPATHLEN+1];
         int linklen = readlink(progpath, tmpbuffer, MAXPATHLEN);
         while (linklen != -1) {
             /* It's not null terminated! */
             tmpbuffer[linklen] = '\0';
             if (tmpbuffer[0] == SEP)
                 /* tmpbuffer should never be longer than MAXPATHLEN,
                    but extra check does not hurt */
                 strncpy(argv0_path, tmpbuffer, MAXPATHLEN);
             else {
                 /* Interpret relative to progpath */
                 reduce(argv0_path);
                 joinpath(argv0_path, tmpbuffer);
             }
             linklen = readlink(argv0_path, tmpbuffer, MAXPATHLEN);
         }
     }
 #endif /* HAVE_READLINK */

     reduce(argv0_path);
     /* At this point, argv0_path is guaranteed to be less than
        MAXPATHLEN bytes long.
     */

     if (!(pfound = search_for_prefix(argv0_path, home))) {
         if (!Py_FrozenFlag)
             fprintf(stderr,
                 "Could not find platform independent libraries <prefix>\n");
         strncpy(prefix, PREFIX, MAXPATHLEN);
         joinpath(prefix, lib_python);
     }
     else
         reduce(prefix);

     strncpy(zip_path, prefix, MAXPATHLEN);
     zip_path[MAXPATHLEN] = '\0';
     if (pfound > 0) { /* Use the reduced prefix returned by Py_GetPrefix() */
         reduce(zip_path);
         reduce(zip_path);
     }
     else
         strncpy(zip_path, PREFIX, MAXPATHLEN);
     joinpath(zip_path, "lib/python00.zip");
     bufsz = strlen(zip_path);   /* Replace "00" with version */
     zip_path[bufsz - 6] = VERSION[0];
     zip_path[bufsz - 5] = VERSION[2];

     if (!(efound = search_for_exec_prefix(argv0_path, home))) {
         if (!Py_FrozenFlag)
             fprintf(stderr,
                 "Could not find platform dependent libraries <exec_prefix>\n");
         strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
         joinpath(exec_prefix, "lib/lib-dynload");
     }
     /* If we found EXEC_PREFIX do *not* reduce it!  (Yet.) */

     if ((!pfound || !efound) && !Py_FrozenFlag)
         fprintf(stderr,
                 "Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]\n");

     /* Calculate size of return buffer.
      */
     bufsz = 0;

     if (rtpypath)
         bufsz += strlen(rtpypath) + 1;

     prefixsz = strlen(prefix) + 1;

     while (1) {
         char *delim = strchr(defpath, DELIM);

         if (defpath[0] != SEP)
             /* Paths are relative to prefix */
             bufsz += prefixsz;

         if (delim)
             bufsz += delim - defpath + 1;
         else {
             bufsz += strlen(defpath) + 1;
             break;
         }
         defpath = delim + 1;
     }

     bufsz += strlen(zip_path) + 1;
     bufsz += strlen(exec_prefix) + 1;

     /* This is the only malloc call in this file */
     buf = (char *)PyMem_Malloc(bufsz);

     if (buf == NULL) {
         /* We can't exit, so print a warning and limp along */
         fprintf(stderr, "Not enough memory for dynamic PYTHONPATH.\n");
         fprintf(stderr, "Using default static PYTHONPATH.\n");
         module_search_path = PYTHONPATH;
     }
     else {
         /* Run-time value of $PYTHONPATH goes first */
         if (rtpypath) {
             strcpy(buf, rtpypath);
             strcat(buf, delimiter);
         }
         else
             buf[0] = '\0';

         /* Next is the default zip path */
         strcat(buf, zip_path);
         strcat(buf, delimiter);

         /* Next goes merge of compile-time $PYTHONPATH with
          * dynamically located prefix.
          */
         defpath = pythonpath;
         while (1) {
             char *delim = strchr(defpath, DELIM);

             if (defpath[0] != SEP) {
                 strcat(buf, prefix);
                 strcat(buf, separator);
             }

             if (delim) {
                 size_t len = delim - defpath + 1;
                 size_t end = strlen(buf) + len;
                 strncat(buf, defpath, len);
                 *(buf + end) = '\0';
             }
             else {
                 strcat(buf, defpath);
                 break;
             }
             defpath = delim + 1;
         }
         strcat(buf, delimiter);

         /* Finally, on goes the directory for dynamic-load modules */
         strcat(buf, exec_prefix);

         /* And publish the results */
         module_search_path = buf;
     }

     /* Reduce prefix and exec_prefix to their essence,
      * e.g. /usr/local/lib/python1.5 is reduced to /usr/local.
      * If we're loading relative to the build directory,
      * return the compiled-in defaults instead.
      */
     if (pfound > 0) {
         reduce(prefix);
         reduce(prefix);
         /* The prefix is the root directory, but reduce() chopped
          * off the "/". */
         if (!prefix[0])
                 strcpy(prefix, separator);
     }
     else
         strncpy(prefix, PREFIX, MAXPATHLEN);

     if (efound > 0) {
         reduce(exec_prefix);
         reduce(exec_prefix);
         reduce(exec_prefix);
         if (!exec_prefix[0])
                 strcpy(exec_prefix, separator);
     }
     else
         strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
 }


 /* External interface */

 char *
 Py_GetPath(void)
 {
     if (!module_search_path)
         calculate_path();
     return module_search_path;
 }

 char *
 Py_GetPrefix(void)
 {
     if (!module_search_path)
         calculate_path();
     return prefix;
 }

 char *
 Py_GetExecPrefix(void)
 {
     if (!module_search_path)
         calculate_path();
     return exec_prefix;
 }

 char *
 Py_GetProgramFullPath(void)
 {
     if (!module_search_path)
         calculate_path();
     return progpath;
 }


 #ifdef __cplusplus
 }
 #endif
	/* Return the initial module search path. */

	#include "Python.h"
	#include "osdefs.h"

	#include <sys/types.h>
	#include <string.h>

	#ifdef __APPLE__
	#include <mach-o/dyld.h>
	#endif

	/* Search in some common locations for the associated Python libraries.
	*
	* Two directories must be found, the platform independent directory
	* (prefix), containing the common .py and .pyc files, and the platform
	* dependent directory (exec_prefix), containing the shared library
	* modules. Note that prefix and exec_prefix can be the same directory,
	* but for some installations, they are different.
	*
	* Py_GetPath() carries out separate searches for prefix and exec_prefix.
	* Each search tries a number of different locations until a ``landmark''
	* file or directory is found. If no prefix or exec_prefix is found, a
	* warning message is issued and the preprocessor defined PREFIX and
	* EXEC_PREFIX are used (even though they will not work); python carries on
	* as best as is possible, but most imports will fail.
	*
	* Before any searches are done, the location of the executable is
	* determined. If argv[0] has one or more slashes in it, it is used
	* unchanged. Otherwise, it must have been invoked from the shell's path,
	* so we search $PATH for the named executable and use that. If the
	* executable was not found on $PATH (or there was no $PATH environment
	* variable), the original argv[0] string is used.
	*
	* Next, the executable location is examined to see if it is a symbolic
	* link. If so, the link is chased (correctly interpreting a relative
	* pathname if one is found) and the directory of the link target is used.
	*
	* Finally, argv0_path is set to the directory containing the executable
	* (i.e. the last component is stripped).
	*
	* With argv0_path in hand, we perform a number of steps. The same steps
	* are performed for prefix and for exec_prefix, but with a different
	* landmark.
	*
	* Step 1. Are we running python out of the build directory? This is
	* checked by looking for a different kind of landmark relative to
	* argv0_path. For prefix, the landmark's path is derived from the VPATH
	* preprocessor variable (taking into account that its value is almost, but
	* not quite, what we need). For exec_prefix, the landmark is
	* Modules/Setup. If the landmark is found, we're done.
	*
	* For the remaining steps, the prefix landmark will always be
	* lib/python$VERSION/os.py and the exec_prefix will always be
	* lib/python$VERSION/lib-dynload, where $VERSION is Python's version
	* number as supplied by the Makefile. Note that this means that no more
	* build directory checking is performed; if the first step did not find
	* the landmarks, the assumption is that python is running from an
	* installed setup.
	*
	* Step 2. See if the $PYTHONHOME environment variable points to the
	* installed location of the Python libraries. If $PYTHONHOME is set, then
	* it points to prefix and exec_prefix. $PYTHONHOME can be a single
	* directory, which is used for both, or the prefix and exec_prefix
	* directories separated by a colon.
	*
	* Step 3. Try to find prefix and exec_prefix relative to argv0_path,
	* backtracking up the path until it is exhausted. This is the most common
	* step to succeed. Note that if prefix and exec_prefix are different,
	* exec_prefix is more likely to be found; however if exec_prefix is a
	* subdirectory of prefix, both will be found.
	*
	* Step 4. Search the directories pointed to by the preprocessor variables
	* PREFIX and EXEC_PREFIX. These are supplied by the Makefile but can be
	* passed in as options to the configure script.
	*
	* That's it!
	*
	* Well, almost. Once we have determined prefix and exec_prefix, the
	* preprocessor variable PYTHONPATH is used to construct a path. Each
	* relative path on PYTHONPATH is prefixed with prefix. Then the directory
	* containing the shared library modules is appended. The environment
	* variable $PYTHONPATH is inserted in front of it all. Finally, the
	* prefix and exec_prefix globals are tweaked so they reflect the values
	* expected by other code, by stripping the "lib/python$VERSION/..." stuff
	* off. If either points to the build directory, the globals are reset to
	* the corresponding preprocessor variables (so sys.prefix will reflect the
	* installation location, even though sys.path points into the build
	* directory). This seems to make more sense given that currently the only
	* known use of sys.prefix and sys.exec_prefix is for the ILU installation
	* process to find the installed Python tree.
	*/

	#ifdef __cplusplus
	extern "C" {
	#endif


	#ifndef VERSION
	#define VERSION "2.1"
	#endif

	#ifndef VPATH
	#define VPATH "."
	#endif

	#ifndef PREFIX
	# ifdef __VMS
	# define PREFIX ""
	# else
	# define PREFIX "/usr/local"
	# endif
	#endif

	#ifndef EXEC_PREFIX
	#define EXEC_PREFIX PREFIX
	#endif

	#ifndef PYTHONPATH
	#define PYTHONPATH PREFIX "/lib/python" VERSION ":" \
	EXEC_PREFIX "/lib/python" VERSION "/lib-dynload"
	#endif

	#ifndef LANDMARK
	#define LANDMARK "os.py"
	#endif

	static char prefix[MAXPATHLEN+1];
	static char exec_prefix[MAXPATHLEN+1];
	static char progpath[MAXPATHLEN+1];
	static char *module_search_path = NULL;
	static char lib_python[] = "lib/python" VERSION;

	static void
	reduce(char *dir)
	{
	size_t i = strlen(dir);
	while (i > 0 && dir[i] != SEP)
	--i;
	dir[i] = '\0';
	}


	static int
	isfile(char filename) / Is file, not directory */
	{
	struct stat buf;
	if (stat(filename, &buf) != 0)
	return 0;
	if (!S_ISREG(buf.st_mode))
	return 0;
	return 1;
	}


	static int
	ismodule(char filename) / Is module -- check for .pyc/.pyo too */
	{
	if (isfile(filename))
	return 1;

	/* Check for the compiled version of prefix. */
	if (strlen(filename) < MAXPATHLEN) {
	strcat(filename, Py_OptimizeFlag ? "o" : "c");
	if (isfile(filename))
	return 1;
	}
	return 0;
	}


	static int
	isxfile(char filename) / Is executable file */
	{
	struct stat buf;
	if (stat(filename, &buf) != 0)
	return 0;
	if (!S_ISREG(buf.st_mode))
	return 0;
	if ((buf.st_mode & 0111) == 0)
	return 0;
	return 1;
	}


	static int
	isdir(char filename) / Is directory */
	{
	struct stat buf;
	if (stat(filename, &buf) != 0)
	return 0;
	if (!S_ISDIR(buf.st_mode))
	return 0;
	return 1;
	}


	/* Add a path component, by appending stuff to buffer.
	buffer must have at least MAXPATHLEN + 1 bytes allocated, and contain a
	NUL-terminated string with no more than MAXPATHLEN characters (not counting
	the trailing NUL). It's a fatal error if it contains a string longer than
	that (callers must be careful!). If these requirements are met, it's
	guaranteed that buffer will still be a NUL-terminated string with no more
	than MAXPATHLEN characters at exit. If stuff is too long, only as much of
	stuff as fits will be appended.
	*/
	static void
	joinpath(char buffer, char stuff)
	{
	size_t n, k;
	if (stuff[0] == SEP)
	n = 0;
	else {
	n = strlen(buffer);
	if (n > 0 && buffer[n-1] != SEP && n < MAXPATHLEN)
	buffer[n++] = SEP;
	}
	if (n > MAXPATHLEN)
	Py_FatalError("buffer overflow in getpath.c's joinpath()");
	k = strlen(stuff);
	if (n + k > MAXPATHLEN)
	k = MAXPATHLEN - n;
	strncpy(buffer+n, stuff, k);
	buffer[n+k] = '\0';
	}

	/* copy_absolute requires that path be allocated at least
	MAXPATHLEN + 1 bytes and that p be no more than MAXPATHLEN bytes. */
	static void
	copy_absolute(char path, char p)
	{
	if (p[0] == SEP)
	strcpy(path, p);
	else {
	if (!getcwd(path, MAXPATHLEN)) {
	/* unable to get the current directory */
	strcpy(path, p);
	return;
	}
	if (p[0] == '.' && p[1] == SEP)
	p += 2;
	joinpath(path, p);
	}
	}

	/* absolutize() requires that path be allocated at least MAXPATHLEN+1 bytes. */
	static void
	absolutize(char *path)
	{
	char buffer[MAXPATHLEN + 1];

	if (path[0] == SEP)
	return;
	copy_absolute(buffer, path);
	strcpy(path, buffer);
	}

	/* search_for_prefix requires that argv0_path be no more than MAXPATHLEN
	bytes long.
	*/
	static int
	search_for_prefix(char argv0_path, char home)
	{
	size_t n;
	char *vpath;

	/* If PYTHONHOME is set, we believe it unconditionally */
	if (home) {
	char *delim;
	strncpy(prefix, home, MAXPATHLEN);
	delim = strchr(prefix, DELIM);
	if (delim)
	*delim = '\0';
	joinpath(prefix, lib_python);
	joinpath(prefix, LANDMARK);
	return 1;
	}

	/* Check to see if argv[0] is in the build directory */
	strcpy(prefix, argv0_path);
	joinpath(prefix, "Modules/Setup");
	if (isfile(prefix)) {
	/* Check VPATH to see if argv0_path is in the build directory. */
	vpath = VPATH;
	strcpy(prefix, argv0_path);
	joinpath(prefix, vpath);
	joinpath(prefix, "Lib");
	joinpath(prefix, LANDMARK);
	if (ismodule(prefix))
	return -1;
	}

	/* Search from argv0_path, until root is found */
	copy_absolute(prefix, argv0_path);
	do {
	n = strlen(prefix);
	joinpath(prefix, lib_python);
	joinpath(prefix, LANDMARK);
	if (ismodule(prefix))
	return 1;
	prefix[n] = '\0';
	reduce(prefix);
	} while (prefix[0]);

	/* Look at configure's PREFIX */
	strncpy(prefix, PREFIX, MAXPATHLEN);
	joinpath(prefix, lib_python);
	joinpath(prefix, LANDMARK);
	if (ismodule(prefix))
	return 1;

	/* Fail */
	return 0;
	}


	/* search_for_exec_prefix requires that argv0_path be no more than
	MAXPATHLEN bytes long.
	*/
	static int
	search_for_exec_prefix(char argv0_path, char home)
	{
	size_t n;

	/* If PYTHONHOME is set, we believe it unconditionally */
	if (home) {
	char *delim;
	delim = strchr(home, DELIM);
	if (delim)
	strncpy(exec_prefix, delim+1, MAXPATHLEN);
	else
	strncpy(exec_prefix, home, MAXPATHLEN);
	joinpath(exec_prefix, lib_python);
	joinpath(exec_prefix, "lib-dynload");
	return 1;
	}

	/* Check to see if argv[0] is in the build directory */
	strcpy(exec_prefix, argv0_path);
	joinpath(exec_prefix, "Modules/Setup");
	if (isfile(exec_prefix)) {
	reduce(exec_prefix);
	return -1;
	}

	/* Search from argv0_path, until root is found */
	copy_absolute(exec_prefix, argv0_path);
	do {
	n = strlen(exec_prefix);
	joinpath(exec_prefix, lib_python);
	joinpath(exec_prefix, "lib-dynload");
	if (isdir(exec_prefix))
	return 1;
	exec_prefix[n] = '\0';
	reduce(exec_prefix);
	} while (exec_prefix[0]);

	/* Look at configure's EXEC_PREFIX */
	strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
	joinpath(exec_prefix, lib_python);
	joinpath(exec_prefix, "lib-dynload");
	if (isdir(exec_prefix))
	return 1;

	/* Fail */
	return 0;
	}


	static void
	calculate_path(void)
	{
	extern char *Py_GetProgramName(void);

	static char delimiter[2] = {DELIM, '\0'};
	static char separator[2] = {SEP, '\0'};
	char *pythonpath = PYTHONPATH;
	char *rtpypath = Py_GETENV("PYTHONPATH");
	char *home = Py_GetPythonHome();
	char *path = getenv("PATH");
	char *prog = Py_GetProgramName();
	char argv0_path[MAXPATHLEN+1];
	char zip_path[MAXPATHLEN+1];
	int pfound, efound; /* 1 if found; -1 if found build directory */
	char *buf;
	size_t bufsz;
	size_t prefixsz;
	char *defpath = pythonpath;
	#ifdef WITH_NEXT_FRAMEWORK
	NSModule pythonModule;
	#endif
	#ifdef __APPLE__
	#if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_4
	uint32_t nsexeclength = MAXPATHLEN;
	#else
	unsigned long nsexeclength = MAXPATHLEN;
	#endif
	#endif

	/* If there is no slash in the argv0 path, then we have to
	* assume python is on the user's $PATH, since there's no
	* other way to find a directory to start the search from. If
	* $PATH isn't exported, you lose.
	*/
	if (strchr(prog, SEP))
	strncpy(progpath, prog, MAXPATHLEN);
	#ifdef __APPLE__
	/* On Mac OS X, if a script uses an interpreter of the form
	* "#!/opt/python2.3/bin/python", the kernel only passes "python"
	* as argv[0], which falls through to the $PATH search below.
	* If /opt/python2.3/bin isn't in your path, or is near the end,
	* this algorithm may incorrectly find /usr/bin/python. To work
	* around this, we can use _NSGetExecutablePath to get a better
	* hint of what the intended interpreter was, although this
	* will fail if a relative path was used. but in that case,
	* absolutize() should help us out below
	*/
	else if(0 == _NSGetExecutablePath(progpath, &nsexeclength) && progpath[0] == SEP)
	;
	#endif /* __APPLE__ */
	else if (path) {
	while (1) {
	char *delim = strchr(path, DELIM);

	if (delim) {
	size_t len = delim - path;
	if (len > MAXPATHLEN)
	len = MAXPATHLEN;
	strncpy(progpath, path, len);
	*(progpath + len) = '\0';
	}
	else
	strncpy(progpath, path, MAXPATHLEN);

	joinpath(progpath, prog);
	if (isxfile(progpath))
	break;

	if (!delim) {
	progpath[0] = '\0';
	break;
	}
	path = delim + 1;
	}
	}
	else
	progpath[0] = '\0';
	if (progpath[0] != SEP && progpath[0] != '\0')
	absolutize(progpath);
	strncpy(argv0_path, progpath, MAXPATHLEN);
	argv0_path[MAXPATHLEN] = '\0';

	#ifdef WITH_NEXT_FRAMEWORK
	/* On Mac OS X we have a special case if we're running from a framework.
	** This is because the python home should be set relative to the library,
	** which is in the framework, not relative to the executable, which may
	** be outside of the framework. Except when we're in the build directory...
	*/
	pythonModule = NSModuleForSymbol(NSLookupAndBindSymbol("_Py_Initialize"));
	/* Use dylib functions to find out where the framework was loaded from */
	buf = (char *)NSLibraryNameForModule(pythonModule);
	if (buf != NULL) {
	/* We're in a framework. */
	/* See if we might be in the build directory. The framework in the
	** build directory is incomplete, it only has the .dylib and a few
	** needed symlinks, it doesn't have the Lib directories and such.
	** If we're running with the framework from the build directory we must
	** be running the interpreter in the build directory, so we use the
	** build-directory-specific logic to find Lib and such.
	*/
	strncpy(argv0_path, buf, MAXPATHLEN);
	reduce(argv0_path);
	joinpath(argv0_path, lib_python);
	joinpath(argv0_path, LANDMARK);
	if (!ismodule(argv0_path)) {
	/* We are in the build directory so use the name of the
	executable - we know that the absolute path is passed */
	strncpy(argv0_path, progpath, MAXPATHLEN);
	}
	else {
	/* Use the location of the library as the progpath */
	strncpy(argv0_path, buf, MAXPATHLEN);
	}
	}
	#endif

	#if HAVE_READLINK
	{
	char tmpbuffer[MAXPATHLEN+1];
	int linklen = readlink(progpath, tmpbuffer, MAXPATHLEN);
	while (linklen != -1) {
	/* It's not null terminated! */
	tmpbuffer[linklen] = '\0';
	if (tmpbuffer[0] == SEP)
	/* tmpbuffer should never be longer than MAXPATHLEN,
	but extra check does not hurt */
	strncpy(argv0_path, tmpbuffer, MAXPATHLEN);
	else {
	/* Interpret relative to progpath */
	reduce(argv0_path);
	joinpath(argv0_path, tmpbuffer);
	}
	linklen = readlink(argv0_path, tmpbuffer, MAXPATHLEN);
	}
	}
	#endif /* HAVE_READLINK */

	reduce(argv0_path);
	/* At this point, argv0_path is guaranteed to be less than
	MAXPATHLEN bytes long.
	*/

	if (!(pfound = search_for_prefix(argv0_path, home))) {
	if (!Py_FrozenFlag)
	fprintf(stderr,
	"Could not find platform independent libraries <prefix>\n");
	strncpy(prefix, PREFIX, MAXPATHLEN);
	joinpath(prefix, lib_python);
	}
	else
	reduce(prefix);

	strncpy(zip_path, prefix, MAXPATHLEN);
	zip_path[MAXPATHLEN] = '\0';
	if (pfound > 0) { /* Use the reduced prefix returned by Py_GetPrefix() */
	reduce(zip_path);
	reduce(zip_path);
	}
	else
	strncpy(zip_path, PREFIX, MAXPATHLEN);
	joinpath(zip_path, "lib/python00.zip");
	bufsz = strlen(zip_path); /* Replace "00" with version */
	zip_path[bufsz - 6] = VERSION[0];
	zip_path[bufsz - 5] = VERSION[2];

	if (!(efound = search_for_exec_prefix(argv0_path, home))) {
	if (!Py_FrozenFlag)
	fprintf(stderr,
	"Could not find platform dependent libraries <exec_prefix>\n");
	strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
	joinpath(exec_prefix, "lib/lib-dynload");
	}
	/* If we found EXEC_PREFIX do not reduce it! (Yet.) */

	if ((!pfound \|\| !efound) && !Py_FrozenFlag)
	fprintf(stderr,
	"Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]\n");

	/* Calculate size of return buffer.
	*/
	bufsz = 0;

	if (rtpypath)
	bufsz += strlen(rtpypath) + 1;

	prefixsz = strlen(prefix) + 1;

	while (1) {
	char *delim = strchr(defpath, DELIM);

	if (defpath[0] != SEP)
	/* Paths are relative to prefix */
	bufsz += prefixsz;

	if (delim)
	bufsz += delim - defpath + 1;
	else {
	bufsz += strlen(defpath) + 1;
	break;
	}
	defpath = delim + 1;
	}

	bufsz += strlen(zip_path) + 1;
	bufsz += strlen(exec_prefix) + 1;

	/* This is the only malloc call in this file */
	buf = (char *)PyMem_Malloc(bufsz);

	if (buf == NULL) {
	/* We can't exit, so print a warning and limp along */
	fprintf(stderr, "Not enough memory for dynamic PYTHONPATH.\n");
	fprintf(stderr, "Using default static PYTHONPATH.\n");
	module_search_path = PYTHONPATH;
	}
	else {
	/* Run-time value of $PYTHONPATH goes first */
	if (rtpypath) {
	strcpy(buf, rtpypath);
	strcat(buf, delimiter);
	}
	else
	buf[0] = '\0';

	/* Next is the default zip path */
	strcat(buf, zip_path);
	strcat(buf, delimiter);

	/* Next goes merge of compile-time $PYTHONPATH with
	* dynamically located prefix.
	*/
	defpath = pythonpath;
	while (1) {
	char *delim = strchr(defpath, DELIM);

	if (defpath[0] != SEP) {
	strcat(buf, prefix);
	strcat(buf, separator);
	}

	if (delim) {
	size_t len = delim - defpath + 1;
	size_t end = strlen(buf) + len;
	strncat(buf, defpath, len);
	*(buf + end) = '\0';
	}
	else {
	strcat(buf, defpath);
	break;
	}
	defpath = delim + 1;
	}
	strcat(buf, delimiter);

	/* Finally, on goes the directory for dynamic-load modules */
	strcat(buf, exec_prefix);

	/* And publish the results */
	module_search_path = buf;
	}

	/* Reduce prefix and exec_prefix to their essence,
	* e.g. /usr/local/lib/python1.5 is reduced to /usr/local.
	* If we're loading relative to the build directory,
	* return the compiled-in defaults instead.
	*/
	if (pfound > 0) {
	reduce(prefix);
	reduce(prefix);
	/* The prefix is the root directory, but reduce() chopped
	* off the "/". */
	if (!prefix[0])
	strcpy(prefix, separator);
	}
	else
	strncpy(prefix, PREFIX, MAXPATHLEN);

	if (efound > 0) {
	reduce(exec_prefix);
	reduce(exec_prefix);
	reduce(exec_prefix);
	if (!exec_prefix[0])
	strcpy(exec_prefix, separator);
	}
	else
	strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
	}


	/* External interface */

	char *
	Py_GetPath(void)
	{
	if (!module_search_path)
	calculate_path();
	return module_search_path;
	}

	char *
	Py_GetPrefix(void)
	{
	if (!module_search_path)
	calculate_path();
	return prefix;
	}

	char *
	Py_GetExecPrefix(void)
	{
	if (!module_search_path)
	calculate_path();
	return exec_prefix;
	}

	char *
	Py_GetProgramFullPath(void)
	{
	if (!module_search_path)
	calculate_path();
	return progpath;
	}


	#ifdef __cplusplus
	}
	#endif