edk2/MdePkg/Include/Ppi/Smbus.h - edk2 - Git at Google

 /** @file
   This file declares Smbus PPI.

   Copyright (c) 2006, Intel Corporation
   All rights reserved. This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
   http://opensource.org/licenses/bsd-license.php

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

   Module Name:  Smbus.h

   @par Revision Reference:
   This PPI is defined in Framework of EFI SmBus PPI spec.
   Version 0.9

 **/

 #ifndef _PEI_SMBUS_PPI_H
 #define _PEI_SMBUS_PPI_H

 #define EFI_PEI_SMBUS_PPI_GUID \
   { \
     0xabd42895, 0x78cf, 0x4872, {0x84, 0x44, 0x1b, 0x5c, 0x18, 0xb, 0xfb, 0xda } \
   }

 typedef struct _EFI_PEI_SMBUS_PPI EFI_PEI_SMBUS_PPI;

 /**
   Executes an SMBus operation to an SMBus controller.

   @param  PeiServices A pointer to the system PEI Services Table.

   @param  This A pointer to the EFI_PEI_SMBUS_PPI instance.

   @param  SlaveAddress The SMBUS hardware address to which the SMBUS
   device is preassigned or allocated.

   @param  Command This command is transmitted by the SMBus host
   controller to the SMBus slave device and the interpretation is
   SMBus slave device specific.

   @param  Operation Signifies which particular SMBus hardware protocol
   instance that it will use to execute the SMBus transactions.

   @param  PecCheck Defines if Packet Error Code (PEC) checking is required
   for this operation.

   @param  Length Signifies the number of bytes that this operation will do.

   @param  Buffer Contains the value of data to execute to the SMBus slave device.

   @retval EFI_SUCCESS The last data that was returned from the access
   matched the poll exit criteria.

   @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect)

   @retval EFI_TIMEOUT Timeout expired before the operation was completed.
   Timeout is determined by the SMBus host controller device.

   @retval EFI_OUT_OF_RESOURCES The request could not be completed
   due to a lack of resources.

   @retval EFI_DEVICE_ERROR The request was not completed because
   a failure reflected in the Host Status Register bit.

   @retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
   Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and
   EfiSmbusQuickWrite. Length is outside the range of valid values.

   @retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.

   @retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION) (
   IN      EFI_PEI_SERVICES          **PeiServices,
   IN EFI_PEI_SMBUS_PPI              *This,
   IN      EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
   IN      EFI_SMBUS_DEVICE_COMMAND  Command,
   IN      EFI_SMBUS_OPERATION       Operation,
   IN      BOOLEAN                   PecCheck,
   IN OUT  UINTN                     *Length,
   IN OUT  VOID                      *Buffer
   );

 typedef struct {
   UINT32  VendorSpecificId;
   UINT16  SubsystemDeviceId;
   UINT16  SubsystemVendorId;
   UINT16  Interface;
   UINT16  DeviceId;
   UINT16  VendorId;
   UINT8   VendorRevision;
   UINT8   DeviceCapabilities;
 } EFI_SMBUS_UDID;

 /**
   CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.

   @param  PeiServices A pointer to the system PEI Services Table.

   @param  This A pointer to the EFI_PEI_SMBUS_PPI instance.

   @param  SlaveAddress The SMBUS hardware address to which the SMBUS
   device is preassigned or allocated.

   @param  Data Data of the SMBus host notify command that
   the caller wants to be called.

   @return Status Code

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_PEI_SMBUS_NOTIFY_FUNCTION) (
   IN      EFI_PEI_SERVICES              **PeiServices,
   IN EFI_PEI_SMBUS_PPI                  *SmbusPpi,
   IN      EFI_SMBUS_DEVICE_ADDRESS      SlaveAddress,
   IN      UINTN                         Data
   );

 /**
   The ArpDevice() function enumerates the entire bus or enumerates a specific
   device that is identified by SmbusUdid.

   @param  PeiServices A pointer to the system PEI Services Table.

   @param  This A pointer to the EFI_PEI_SMBUS_PPI instance.

   @param  ArpAll A Boolean expression that indicates if the host drivers need
   to enumerate all the devices or enumerate only the device that is identified
   by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.
   If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address
   will be at SlaveAddress.

   @param  SmbusUdid The targeted SMBus Unique Device Identifier (UDID).
   The UDID may not exist for SMBus devices with fixed addresses.

   @param  SlaveAddress The new SMBus address for the slave device for
   which the operation is targeted.

   @retval EFI_SUCCESS The SMBus slave device address was set.

   @retval EFI_INVALID_PARAMETER SlaveAddress is NULL.

   @retval EFI_OUT_OF_RESOURCES The request could not be completed
   due to a lack of resources.

   @retval EFI_TIMEOUT The SMBus slave device did not respond.

   @retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_PEI_SMBUS_PPI_ARP_DEVICE) (
   IN      EFI_PEI_SERVICES          **PeiServices,
   IN EFI_PEI_SMBUS_PPI              *This,
   IN      BOOLEAN                   ArpAll,
   IN      EFI_SMBUS_UDID            *SmbusUdid, OPTIONAL
   IN OUT  EFI_SMBUS_DEVICE_ADDRESS  *SlaveAddress OPTIONAL
   );

 typedef struct {
   EFI_SMBUS_DEVICE_ADDRESS  SmbusDeviceAddress;
   EFI_SMBUS_UDID            SmbusDeviceUdid;
 } EFI_SMBUS_DEVICE_MAP;

 /**
   The GetArpMap() function returns the mapping of all the SMBus devices
   that are enumerated by the SMBus host driver.

   @param  PeiServices A pointer to the system PEI Services Table.

   @param  This A pointer to the EFI_PEI_SMBUS_PPI instance.

   @param  Length Size of the buffer that contains the SMBus device map.

   @param  SmbusDeviceMap The pointer to the device map as enumerated
   by the SMBus controller driver.

   @retval EFI_SUCCESS The device map was returned correctly in the buffer.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_PEI_SMBUS_PPI_GET_ARP_MAP) (
   IN      EFI_PEI_SERVICES          **PeiServices,
   IN EFI_PEI_SMBUS_PPI              *This,
   IN OUT  UINTN                     *Length,
   IN OUT  EFI_SMBUS_DEVICE_MAP      **SmbusDeviceMap
   );

 /**
   The Notify() function registers all the callback functions to allow the
   bus driver to call these functions when the SlaveAddress/Data pair happens.

   @param  PeiServices A pointer to the system PEI Services Table.

   @param  This A pointer to the EFI_PEI_SMBUS_PPI instance.

   @param  SlaveAddress Address that the host controller detects as
   sending a message and calls all the registered functions.

   @param  Data Data that the host controller detects as sending a message
   and calls all the registered functions.

   @param  NotifyFunction The function to call when the bus driver
   detects the SlaveAddress and Data pair.

   @retval EFI_SUCCESS NotifyFunction has been registered.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY) (
   IN      EFI_PEI_SERVICES          **PeiServices,
   IN EFI_PEI_SMBUS_PPI              *This,
   IN      EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
   IN      UINTN                     Data,
   IN  EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction
   );

 /**
   @par Ppi Description:
   Provides the basic I/O interfaces that a PEIM uses to access
   its SMBus controller and the slave devices attached to it.

   @param Execute
   Executes the SMBus operation to an SMBus slave device.

   @param ArpDevice
   Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)

   @param GetArpMap
   Allows a PEIM to retrieve the address that was allocated by the SMBus
   host controller during enumeration/ARP.

   @param Notify
   Allows a driver to register for a callback to the SMBus host
   controller driver when the bus issues a notification to the bus controller PEIM.

 **/
 struct _EFI_PEI_SMBUS_PPI {
   EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION Execute;
   EFI_PEI_SMBUS_PPI_ARP_DEVICE        ArpDevice;
   EFI_PEI_SMBUS_PPI_GET_ARP_MAP       GetArpMap;
   EFI_PEI_SMBUS_PPI_NOTIFY            Notify;
 };

 extern EFI_GUID gEfiPeiSmbusPpiGuid;

 #endif
	/** @file
	This file declares Smbus PPI.

	Copyright (c) 2006, Intel Corporation
	All rights reserved. This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	Module Name: Smbus.h

	@par Revision Reference:
	This PPI is defined in Framework of EFI SmBus PPI spec.
	Version 0.9

	**/

	#ifndef _PEI_SMBUS_PPI_H
	#define _PEI_SMBUS_PPI_H

	#define EFI_PEI_SMBUS_PPI_GUID \
	{ \
	0xabd42895, 0x78cf, 0x4872, {0x84, 0x44, 0x1b, 0x5c, 0x18, 0xb, 0xfb, 0xda } \
	}

	typedef struct _EFI_PEI_SMBUS_PPI EFI_PEI_SMBUS_PPI;

	/**
	Executes an SMBus operation to an SMBus controller.

	@param PeiServices A pointer to the system PEI Services Table.

	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.

	@param SlaveAddress The SMBUS hardware address to which the SMBUS
	device is preassigned or allocated.

	@param Command This command is transmitted by the SMBus host
	controller to the SMBus slave device and the interpretation is
	SMBus slave device specific.

	@param Operation Signifies which particular SMBus hardware protocol
	instance that it will use to execute the SMBus transactions.

	@param PecCheck Defines if Packet Error Code (PEC) checking is required
	for this operation.

	@param Length Signifies the number of bytes that this operation will do.

	@param Buffer Contains the value of data to execute to the SMBus slave device.

	@retval EFI_SUCCESS The last data that was returned from the access
	matched the poll exit criteria.

	@retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect)

	@retval EFI_TIMEOUT Timeout expired before the operation was completed.
	Timeout is determined by the SMBus host controller device.

	@retval EFI_OUT_OF_RESOURCES The request could not be completed
	due to a lack of resources.

	@retval EFI_DEVICE_ERROR The request was not completed because
	a failure reflected in the Host Status Register bit.

	@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
	Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and
	EfiSmbusQuickWrite. Length is outside the range of valid values.

	@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.

	@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION) (
	IN EFI_PEI_SERVICES **PeiServices,
	IN EFI_PEI_SMBUS_PPI *This,
	IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
	IN EFI_SMBUS_DEVICE_COMMAND Command,
	IN EFI_SMBUS_OPERATION Operation,
	IN BOOLEAN PecCheck,
	IN OUT UINTN *Length,
	IN OUT VOID *Buffer
	);

	typedef struct {
	UINT32 VendorSpecificId;
	UINT16 SubsystemDeviceId;
	UINT16 SubsystemVendorId;
	UINT16 Interface;
	UINT16 DeviceId;
	UINT16 VendorId;
	UINT8 VendorRevision;
	UINT8 DeviceCapabilities;
	} EFI_SMBUS_UDID;

	/**
	CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.

	@param PeiServices A pointer to the system PEI Services Table.

	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.

	@param SlaveAddress The SMBUS hardware address to which the SMBUS
	device is preassigned or allocated.

	@param Data Data of the SMBus host notify command that
	the caller wants to be called.

	@return Status Code

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_PEI_SMBUS_NOTIFY_FUNCTION) (
	IN EFI_PEI_SERVICES **PeiServices,
	IN EFI_PEI_SMBUS_PPI *SmbusPpi,
	IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
	IN UINTN Data
	);

	/**
	The ArpDevice() function enumerates the entire bus or enumerates a specific
	device that is identified by SmbusUdid.

	@param PeiServices A pointer to the system PEI Services Table.

	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.

	@param ArpAll A Boolean expression that indicates if the host drivers need
	to enumerate all the devices or enumerate only the device that is identified
	by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.
	If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address
	will be at SlaveAddress.

	@param SmbusUdid The targeted SMBus Unique Device Identifier (UDID).
	The UDID may not exist for SMBus devices with fixed addresses.

	@param SlaveAddress The new SMBus address for the slave device for
	which the operation is targeted.

	@retval EFI_SUCCESS The SMBus slave device address was set.

	@retval EFI_INVALID_PARAMETER SlaveAddress is NULL.

	@retval EFI_OUT_OF_RESOURCES The request could not be completed
	due to a lack of resources.

	@retval EFI_TIMEOUT The SMBus slave device did not respond.

	@retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_PEI_SMBUS_PPI_ARP_DEVICE) (
	IN EFI_PEI_SERVICES **PeiServices,
	IN EFI_PEI_SMBUS_PPI *This,
	IN BOOLEAN ArpAll,
	IN EFI_SMBUS_UDID *SmbusUdid, OPTIONAL
	IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL
	);

	typedef struct {
	EFI_SMBUS_DEVICE_ADDRESS SmbusDeviceAddress;
	EFI_SMBUS_UDID SmbusDeviceUdid;
	} EFI_SMBUS_DEVICE_MAP;

	/**
	The GetArpMap() function returns the mapping of all the SMBus devices
	that are enumerated by the SMBus host driver.

	@param PeiServices A pointer to the system PEI Services Table.

	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.

	@param Length Size of the buffer that contains the SMBus device map.

	@param SmbusDeviceMap The pointer to the device map as enumerated
	by the SMBus controller driver.

	@retval EFI_SUCCESS The device map was returned correctly in the buffer.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_PEI_SMBUS_PPI_GET_ARP_MAP) (
	IN EFI_PEI_SERVICES **PeiServices,
	IN EFI_PEI_SMBUS_PPI *This,
	IN OUT UINTN *Length,
	IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
	);

	/**
	The Notify() function registers all the callback functions to allow the
	bus driver to call these functions when the SlaveAddress/Data pair happens.

	@param PeiServices A pointer to the system PEI Services Table.

	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.

	@param SlaveAddress Address that the host controller detects as
	sending a message and calls all the registered functions.

	@param Data Data that the host controller detects as sending a message
	and calls all the registered functions.

	@param NotifyFunction The function to call when the bus driver
	detects the SlaveAddress and Data pair.

	@retval EFI_SUCCESS NotifyFunction has been registered.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY) (
	IN EFI_PEI_SERVICES **PeiServices,
	IN EFI_PEI_SMBUS_PPI *This,
	IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
	IN UINTN Data,
	IN EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction
	);

	/**
	@par Ppi Description:
	Provides the basic I/O interfaces that a PEIM uses to access
	its SMBus controller and the slave devices attached to it.

	@param Execute
	Executes the SMBus operation to an SMBus slave device.

	@param ArpDevice
	Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)

	@param GetArpMap
	Allows a PEIM to retrieve the address that was allocated by the SMBus
	host controller during enumeration/ARP.

	@param Notify
	Allows a driver to register for a callback to the SMBus host
	controller driver when the bus issues a notification to the bus controller PEIM.

	**/
	struct _EFI_PEI_SMBUS_PPI {
	EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION Execute;
	EFI_PEI_SMBUS_PPI_ARP_DEVICE ArpDevice;
	EFI_PEI_SMBUS_PPI_GET_ARP_MAP GetArpMap;
	EFI_PEI_SMBUS_PPI_NOTIFY Notify;
	};

	extern EFI_GUID gEfiPeiSmbusPpiGuid;

	#endif