EdkModulePkg/Include/Protocol/ScsiIo.h - edk2 - Git at Google

 /*++

 Copyright (c) 2006, Intel Corporation
 All rights reserved. This program and the accompanying materials
 are licensed and made available under the terms and conditions of the BSD License
 which accompanies this distribution.  The full text of the license may be found at
 http://opensource.org/licenses/bsd-license.php

 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 Module Name:

   ScsiIo.h

 Abstract:

   SCSI I/O protocol.

 --*/

 #ifndef __SCSI_IO_H__
 #define __SCSI_IO_H__

 #define EFI_SCSI_IO_PROTOCOL_GUID \
   { 0x403cd195, 0xf233, 0x48ec, {0x84, 0x55, 0xb2, 0xe5, 0x2f, 0x1d, 0x9e, 0x2  } }

 //
 // Forward reference for pure ANSI compatability
 //
 typedef struct _EFI_SCSI_IO_PROTOCOL  EFI_SCSI_IO_PROTOCOL;

 //
 // SCSI Host Adapter Status definition
 //
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK                     0x00
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND        0x09    // timeout when processing the command
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT                0x0b    // timeout when waiting for the command processing
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT         0x0d    // a message reject was received when processing command
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET              0x0e    // a bus reset was detected
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR           0x0f
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED   0x10    // the adapter failed in issuing request sense command
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT      0x11    // selection timeout
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN  0x12    // data overrun or data underrun
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE               0x13    // Unexepected bus free
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR            0x14    // Target bus phase sequence failure
 #define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER                  0x7f


 //
 // SCSI Target Status definition
 //
 #define EFI_SCSI_IO_STATUS_TARGET_GOOD                         0x00
 #define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION              0x02    // check condition
 #define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET                0x04    // condition met
 #define EFI_SCSI_IO_STATUS_TARGET_BUSY                         0x08    // busy
 #define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE                 0x10    // intermediate
 #define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET   0x14    // intermediate-condition met
 #define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT         0x18    // reservation conflict
 #define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED           0x22    // command terminated
 #define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL                   0x28    // queue full

 typedef struct {
   UINT64      Timeout;
   VOID        *DataBuffer;
   VOID        *SenseData;
   VOID        *Cdb;
   UINT32      TransferLength;
   UINT8       CdbLength;
   UINT8       DataDirection;
   UINT8       HostAdapterStatus;
   UINT8       TargetStatus;
   UINT8       SenseDataLength;
 }EFI_SCSI_IO_SCSI_REQUEST_PACKET;

 typedef
 EFI_STATUS
 (EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE) (
   IN EFI_SCSI_IO_PROTOCOL     *This,
   OUT UINT8                           *DeviceType
   )
 /*++

   Routine Description:
     Retrieves the device type information of the SCSI Controller.

   Arguments:
     This                  - Protocol instance pointer.
     DeviceType            - A pointer to the device type information
                             retrieved from the SCSI Controller.

   Returns:
     EFI_SUCCESS            - Retrieves the device type information successfully.
     EFI_INVALID_PARAMETER  - The DeviceType is NULL.
 --*/
 ;

 typedef
 EFI_STATUS
 (EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION) (
   IN EFI_SCSI_IO_PROTOCOL   *This,
   OUT UINT32                        *Target,
   OUT UINT64                        *Lun
   )
 /*++
   Routine Description:
     Retrieves the device location in the SCSI channel.

   Arguments:
     This                  - Protocol instance pointer.
     Target                - A pointer to the Target ID of a SCSI device
                             on the SCSI channel.
     Lun                    - A pointer to the LUN of the SCSI device on
                             the SCSI channel.

   Returns:
     EFI_SUCCESS            - Retrieves the device location successfully.
     EFI_INVALID_PARAMETER  - The Target or Lun is NULL.
 --*/
 ;

 typedef
 EFI_STATUS
 (EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_BUS) (
   IN EFI_SCSI_IO_PROTOCOL     *This
   )
 /*++

   Routine Description:
     Resets the SCSI Bus that the SCSI Controller is attached to.

   Arguments:
     This                  - Protocol instance pointer.

   Returns:
     EFI_SUCCESS            - The SCSI bus is reset successfully.
     EFI_DEVICE_ERROR      - Errors encountered when resetting the SCSI bus.
     EFI_UNSUPPORTED        - The bus reset operation is not supported by the
                             SCSI Host Controller.
     EFI_TIMEOUT            - A timeout occurred while attempting to reset
                             the SCSI bus.
 --*/
 ;

 typedef
 EFI_STATUS
 (EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_DEVICE) (
   IN EFI_SCSI_IO_PROTOCOL     *This
   )
 /*++

   Routine Description:
     Resets the SCSI Controller that the device handle specifies.

   Arguments:
     This                  - Protocol instance pointer.


   Returns:
     EFI_SUCCESS            - Reset the SCSI controller successfully.
     EFI_DEVICE_ERROR      - Errors are encountered when resetting the
                             SCSI Controller.
     EFI_UNSUPPORTED        - The SCSI bus does not support a device
                             reset operation.
     EFI_TIMEOUT            - A timeout occurred while attempting to
                             reset the SCSI Controller.
 --*/
 ;


 typedef
 EFI_STATUS
 (EFIAPI *EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD) (
   IN EFI_SCSI_IO_PROTOCOL           *This,
   IN OUT  EFI_SCSI_IO_SCSI_REQUEST_PACKET   *Packet,
   IN EFI_EVENT                              Event  OPTIONAL
   )
 /*++

   Routine Description:
     Sends a SCSI Request Packet to the SCSI Controller for execution.

   Arguments:
     This                  - Protocol instance pointer.
     Packet                - The SCSI request packet to send to the SCSI
                             Controller specified by the device handle.
     Event                  - If the SCSI bus where the SCSI device is attached
                             does not support non-blocking I/O, then Event is
                             ignored, and blocking I/O is performed.
                             If Event is NULL, then blocking I/O is performed.
                             If Event is not NULL and non-blocking I/O is
                             supported, then non-blocking I/O is performed,
                             and Event will be signaled when the SCSI Request
                             Packet completes.
   Returns:
     EFI_SUCCESS            - The SCSI Request Packet was sent by the host
                             successfully, and TransferLength bytes were
                             transferred to/from DataBuffer.See
                             HostAdapterStatus, TargetStatus,
                             SenseDataLength, and SenseData in that order
                             for additional status information.
     EFI_WARN_BUFFER_TOO_SMALL  - The SCSI Request Packet was executed,
                             but the entire DataBuffer could not be transferred.
                             The actual number of bytes transferred is returned
                             in TransferLength. See HostAdapterStatus,
                             TargetStatus, SenseDataLength, and SenseData in
                             that order for additional status information.
     EFI_NOT_READY          - The SCSI Request Packet could not be sent because
                             there are too many SCSI Command Packets already
                             queued.The caller may retry again later.
     EFI_DEVICE_ERROR      - A device error occurred while attempting to send
                             the SCSI Request Packet. See HostAdapterStatus,
                             TargetStatus, SenseDataLength, and SenseData in
                             that order for additional status information.
     EFI_INVALID_PARAMETER  - The contents of CommandPacket are invalid.
                             The SCSI Request Packet was not sent, so no
                             additional status information is available.
     EFI_UNSUPPORTED        - The command described by the SCSI Request Packet
                             is not supported by the SCSI initiator(i.e., SCSI
                             Host Controller). The SCSI Request Packet was not
                             sent, so no additional status information is
                             available.
     EFI_TIMEOUT            - A timeout occurred while waiting for the SCSI
                             Request Packet to execute. See HostAdapterStatus,
                             TargetStatus, SenseDataLength, and SenseData in
                             that order for additional status information.
 --*/
 ;

 struct _EFI_SCSI_IO_PROTOCOL {
     EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE      GetDeviceType;
     EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION  GetDeviceLocation;
     EFI_SCSI_IO_PROTOCOL_RESET_BUS            ResetBus;
     EFI_SCSI_IO_PROTOCOL_RESET_DEVICE         ResetDevice;
     EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD        ExecuteSCSICommand;
 };

 extern EFI_GUID gEfiScsiIoProtocolGuid;

 #endif
	/*++

	Copyright (c) 2006, Intel Corporation
	All rights reserved. This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	Module Name:

	ScsiIo.h

	Abstract:

	SCSI I/O protocol.

	--*/

	#ifndef __SCSI_IO_H__
	#define __SCSI_IO_H__

	#define EFI_SCSI_IO_PROTOCOL_GUID \
	{ 0x403cd195, 0xf233, 0x48ec, {0x84, 0x55, 0xb2, 0xe5, 0x2f, 0x1d, 0x9e, 0x2 } }

	//
	// Forward reference for pure ANSI compatability
	//
	typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;

	//
	// SCSI Host Adapter Status definition
	//
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK 0x00
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure
	#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER 0x7f


	//
	// SCSI Target Status definition
	//
	#define EFI_SCSI_IO_STATUS_TARGET_GOOD 0x00
	#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition
	#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET 0x04 // condition met
	#define EFI_SCSI_IO_STATUS_TARGET_BUSY 0x08 // busy
	#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate
	#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met
	#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict
	#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated
	#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL 0x28 // queue full

	typedef struct {
	UINT64 Timeout;
	VOID *DataBuffer;
	VOID *SenseData;
	VOID *Cdb;
	UINT32 TransferLength;
	UINT8 CdbLength;
	UINT8 DataDirection;
	UINT8 HostAdapterStatus;
	UINT8 TargetStatus;
	UINT8 SenseDataLength;
	}EFI_SCSI_IO_SCSI_REQUEST_PACKET;

	typedef
	EFI_STATUS
	(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE) (
	IN EFI_SCSI_IO_PROTOCOL *This,
	OUT UINT8 *DeviceType
	)
	/*++

	Routine Description:
	Retrieves the device type information of the SCSI Controller.

	Arguments:
	This - Protocol instance pointer.
	DeviceType - A pointer to the device type information
	retrieved from the SCSI Controller.

	Returns:
	EFI_SUCCESS - Retrieves the device type information successfully.
	EFI_INVALID_PARAMETER - The DeviceType is NULL.
	--*/
	;

	typedef
	EFI_STATUS
	(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION) (
	IN EFI_SCSI_IO_PROTOCOL *This,
	OUT UINT32 *Target,
	OUT UINT64 *Lun
	)
	/*++
	Routine Description:
	Retrieves the device location in the SCSI channel.

	Arguments:
	This - Protocol instance pointer.
	Target - A pointer to the Target ID of a SCSI device
	on the SCSI channel.
	Lun - A pointer to the LUN of the SCSI device on
	the SCSI channel.

	Returns:
	EFI_SUCCESS - Retrieves the device location successfully.
	EFI_INVALID_PARAMETER - The Target or Lun is NULL.
	--*/
	;

	typedef
	EFI_STATUS
	(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_BUS) (
	IN EFI_SCSI_IO_PROTOCOL *This
	)
	/*++

	Routine Description:
	Resets the SCSI Bus that the SCSI Controller is attached to.

	Arguments:
	This - Protocol instance pointer.

	Returns:
	EFI_SUCCESS - The SCSI bus is reset successfully.
	EFI_DEVICE_ERROR - Errors encountered when resetting the SCSI bus.
	EFI_UNSUPPORTED - The bus reset operation is not supported by the
	SCSI Host Controller.
	EFI_TIMEOUT - A timeout occurred while attempting to reset
	the SCSI bus.
	--*/
	;

	typedef
	EFI_STATUS
	(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_DEVICE) (
	IN EFI_SCSI_IO_PROTOCOL *This
	)
	/*++

	Routine Description:
	Resets the SCSI Controller that the device handle specifies.

	Arguments:
	This - Protocol instance pointer.


	Returns:
	EFI_SUCCESS - Reset the SCSI controller successfully.
	EFI_DEVICE_ERROR - Errors are encountered when resetting the
	SCSI Controller.
	EFI_UNSUPPORTED - The SCSI bus does not support a device
	reset operation.
	EFI_TIMEOUT - A timeout occurred while attempting to
	reset the SCSI Controller.
	--*/
	;


	typedef
	EFI_STATUS
	(EFIAPI *EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD) (
	IN EFI_SCSI_IO_PROTOCOL *This,
	IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet,
	IN EFI_EVENT Event OPTIONAL
	)
	/*++

	Routine Description:
	Sends a SCSI Request Packet to the SCSI Controller for execution.

	Arguments:
	This - Protocol instance pointer.
	Packet - The SCSI request packet to send to the SCSI
	Controller specified by the device handle.
	Event - If the SCSI bus where the SCSI device is attached
	does not support non-blocking I/O, then Event is
	ignored, and blocking I/O is performed.
	If Event is NULL, then blocking I/O is performed.
	If Event is not NULL and non-blocking I/O is
	supported, then non-blocking I/O is performed,
	and Event will be signaled when the SCSI Request
	Packet completes.
	Returns:
	EFI_SUCCESS - The SCSI Request Packet was sent by the host
	successfully, and TransferLength bytes were
	transferred to/from DataBuffer.See
	HostAdapterStatus, TargetStatus,
	SenseDataLength, and SenseData in that order
	for additional status information.
	EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
	but the entire DataBuffer could not be transferred.
	The actual number of bytes transferred is returned
	in TransferLength. See HostAdapterStatus,
	TargetStatus, SenseDataLength, and SenseData in
	that order for additional status information.
	EFI_NOT_READY - The SCSI Request Packet could not be sent because
	there are too many SCSI Command Packets already
	queued.The caller may retry again later.
	EFI_DEVICE_ERROR - A device error occurred while attempting to send
	the SCSI Request Packet. See HostAdapterStatus,
	TargetStatus, SenseDataLength, and SenseData in
	that order for additional status information.
	EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
	The SCSI Request Packet was not sent, so no
	additional status information is available.
	EFI_UNSUPPORTED - The command described by the SCSI Request Packet
	is not supported by the SCSI initiator(i.e., SCSI
	Host Controller). The SCSI Request Packet was not
	sent, so no additional status information is
	available.
	EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
	Request Packet to execute. See HostAdapterStatus,
	TargetStatus, SenseDataLength, and SenseData in
	that order for additional status information.
	--*/
	;

	struct _EFI_SCSI_IO_PROTOCOL {
	EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE GetDeviceType;
	EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION GetDeviceLocation;
	EFI_SCSI_IO_PROTOCOL_RESET_BUS ResetBus;
	EFI_SCSI_IO_PROTOCOL_RESET_DEVICE ResetDevice;
	EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD ExecuteSCSICommand;
	};

	extern EFI_GUID gEfiScsiIoProtocolGuid;

	#endif