| /** @file | |
| Implementation of SmBusLib class library for DXE phase. | |
| Copyright (c) 2006 - 2008, Intel Corporation<BR> | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "InternalSmbusLib.h" | |
| /** | |
| Executes an SMBUS quick read command. | |
| Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address field of SmBusAddress is required. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If PEC is set in SmBusAddress, then ASSERT(). | |
| If Command in SmBusAddress is not zero, then ASSERT(). | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| **/ | |
| VOID | |
| EFIAPI | |
| SmBusQuickRead ( | |
| IN UINTN SmBusAddress, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| ASSERT (!SMBUS_LIB_PEC (SmBusAddress)); | |
| ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusQuickRead, SmBusAddress, 0, NULL, Status); | |
| } | |
| /** | |
| Executes an SMBUS quick write command. | |
| Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address field of SmBusAddress is required. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If PEC is set in SmBusAddress, then ASSERT(). | |
| If Command in SmBusAddress is not zero, then ASSERT(). | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| **/ | |
| VOID | |
| EFIAPI | |
| SmBusQuickWrite ( | |
| IN UINTN SmBusAddress, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| ASSERT (!SMBUS_LIB_PEC (SmBusAddress)); | |
| ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusQuickWrite, SmBusAddress, 0, NULL, Status); | |
| } | |
| /** | |
| Executes an SMBUS receive byte command. | |
| Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address field of SmBusAddress is required. | |
| The byte received from the SMBUS is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Command in SmBusAddress is not zero, then ASSERT(). | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The byte received from the SMBUS. | |
| **/ | |
| UINT8 | |
| EFIAPI | |
| SmBusReceiveByte ( | |
| IN UINTN SmBusAddress, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT8 Byte; | |
| ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusReceiveByte, SmBusAddress, 1, &Byte, Status); | |
| return Byte; | |
| } | |
| /** | |
| Executes an SMBUS send byte command. | |
| Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. | |
| The byte specified by Value is sent. | |
| Only the SMBUS slave address field of SmBusAddress is required. Value is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Command in SmBusAddress is not zero, then ASSERT(). | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Value The 8-bit value to send. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The parameter of Value. | |
| **/ | |
| UINT8 | |
| EFIAPI | |
| SmBusSendByte ( | |
| IN UINTN SmBusAddress, | |
| IN UINT8 Value, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT8 Byte; | |
| ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| Byte = Value; | |
| InternalSmBusExec (EfiSmbusSendByte, SmBusAddress, 1, &Byte, Status); | |
| return Value; | |
| } | |
| /** | |
| Executes an SMBUS read data byte command. | |
| Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| The 8-bit value read from the SMBUS is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The byte read from the SMBUS. | |
| **/ | |
| UINT8 | |
| EFIAPI | |
| SmBusReadDataByte ( | |
| IN UINTN SmBusAddress, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT8 Byte; | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusReadByte, SmBusAddress, 1, &Byte, Status); | |
| return Byte; | |
| } | |
| /** | |
| Executes an SMBUS write data byte command. | |
| Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. | |
| The 8-bit value specified by Value is written. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| Value is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Value The 8-bit value to write. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The parameter of Value. | |
| **/ | |
| UINT8 | |
| EFIAPI | |
| SmBusWriteDataByte ( | |
| IN UINTN SmBusAddress, | |
| IN UINT8 Value, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT8 Byte; | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| Byte = Value; | |
| InternalSmBusExec (EfiSmbusWriteByte, SmBusAddress, 1, &Byte, Status); | |
| return Value; | |
| } | |
| /** | |
| Executes an SMBUS read data word command. | |
| Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| The 16-bit value read from the SMBUS is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The byte read from the SMBUS. | |
| **/ | |
| UINT16 | |
| EFIAPI | |
| SmBusReadDataWord ( | |
| IN UINTN SmBusAddress, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT16 Word; | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusReadWord, SmBusAddress, 2, &Word, Status); | |
| return Word; | |
| } | |
| /** | |
| Executes an SMBUS write data word command. | |
| Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. | |
| The 16-bit value specified by Value is written. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| Value is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Value The 16-bit value to write. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The parameter of Value. | |
| **/ | |
| UINT16 | |
| EFIAPI | |
| SmBusWriteDataWord ( | |
| IN UINTN SmBusAddress, | |
| IN UINT16 Value, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINT16 Word; | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| Word = Value; | |
| InternalSmBusExec (EfiSmbusWriteWord, SmBusAddress, 2, &Word, Status); | |
| return Value; | |
| } | |
| /** | |
| Executes an SMBUS process call command. | |
| Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. | |
| The 16-bit value specified by Value is written. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| The 16-bit value returned by the process call command is returned. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Value The 16-bit value to write. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The 16-bit value returned by the process call command. | |
| **/ | |
| UINT16 | |
| EFIAPI | |
| SmBusProcessCall ( | |
| IN UINTN SmBusAddress, | |
| IN UINT16 Value, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| InternalSmBusExec (EfiSmbusProcessCall, SmBusAddress, 2, &Value, Status); | |
| return Value; | |
| } | |
| /** | |
| Executes an SMBUS read block command. | |
| Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. | |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. | |
| Bytes are read from the SMBUS and stored in Buffer. | |
| The number of bytes read is returned, and will never return a value larger than 32-bytes. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. | |
| SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. | |
| If Length in SmBusAddress is not zero, then ASSERT(). | |
| If Buffer is NULL, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_SUCCESS The SMBUS command was executed. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The number of bytes read. | |
| **/ | |
| UINTN | |
| EFIAPI | |
| SmBusReadBlock ( | |
| IN UINTN SmBusAddress, | |
| OUT VOID *Buffer, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| ASSERT (Buffer != NULL); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| return InternalSmBusExec (EfiSmbusReadBlock, SmBusAddress, 0x20, Buffer, Status); | |
| } | |
| /** | |
| Executes an SMBUS write block command. | |
| Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. | |
| The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. | |
| Bytes are written to the SMBUS from Buffer. | |
| The number of bytes written is returned, and will never return a value larger than 32-bytes. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| If Length in SmBusAddress is zero or greater than 32, then ASSERT(). | |
| If Buffer is NULL, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| MBUS Command, SMBUS Data Length, and PEC. | |
| @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The number of bytes written. | |
| **/ | |
| UINTN | |
| EFIAPI | |
| SmBusWriteBlock ( | |
| IN UINTN SmBusAddress, | |
| OUT VOID *Buffer, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINTN Length; | |
| ASSERT (Buffer != NULL); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| Length = SMBUS_LIB_LENGTH (SmBusAddress); | |
| return InternalSmBusExec (EfiSmbusWriteBlock, SmBusAddress, Length, Buffer, Status); | |
| } | |
| /** | |
| Executes an SMBUS block process call command. | |
| Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. | |
| The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. | |
| Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. | |
| If Status is not NULL, then the status of the executed command is returned in Status. | |
| It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. | |
| SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. | |
| If Length in SmBusAddress is zero or greater than 32, then ASSERT(). | |
| If WriteBuffer is NULL, then ASSERT(). | |
| If ReadBuffer is NULL, then ASSERT(). | |
| If any reserved bits of SmBusAddress are set, then ASSERT(). | |
| @param SmBusAddress Address that encodes the SMBUS Slave Address, | |
| SMBUS Command, SMBUS Data Length, and PEC. | |
| @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS. | |
| @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS. | |
| @param Status Return status for the executed command. | |
| This is an optional parameter and may be NULL. | |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. | |
| RETURN_DEVICE_ERROR The request was not completed because a failure | |
| reflected in the Host Status Register bit. Device errors are a result | |
| of a transaction collision, illegal command field, unclaimed cycle | |
| (host initiated), or bus errors (collisions). | |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) | |
| RETURN_UNSUPPORTED The SMBus operation is not supported. | |
| @return The number of bytes written. | |
| **/ | |
| UINTN | |
| EFIAPI | |
| SmBusBlockProcessCall ( | |
| IN UINTN SmBusAddress, | |
| IN VOID *WriteBuffer, | |
| OUT VOID *ReadBuffer, | |
| OUT RETURN_STATUS *Status OPTIONAL | |
| ) | |
| { | |
| UINTN Length; | |
| ASSERT (WriteBuffer != NULL); | |
| ASSERT (ReadBuffer != NULL); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1); | |
| ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32); | |
| ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0); | |
| Length = SMBUS_LIB_LENGTH (SmBusAddress); | |
| // | |
| // Assuming that ReadBuffer is large enough to save another memory copy. | |
| // | |
| ReadBuffer = CopyMem (ReadBuffer, WriteBuffer, Length); | |
| return InternalSmBusExec (EfiSmbusBWBRProcessCall, SmBusAddress, Length, ReadBuffer, Status); | |
| } |