| /** @file | |
| EFI PCI IO protocol functions declaration for PCI Bus module. | |
| Copyright (c) 2006 - 2009, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _EFI_PCI_IO_PROTOCOL_H_ | |
| #define _EFI_PCI_IO_PROTOCOL_H_ | |
| /** | |
| Initializes a PCI I/O Instance. | |
| @param PciIoDevice Pci device instance. | |
| **/ | |
| VOID | |
| InitializePciIoInstance ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ); | |
| /** | |
| Verifies access to a PCI Base Address Register (BAR). | |
| @param PciIoDevice Pci device instance. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param Type Operation type could be memory or I/O. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Offset The offset within the PCI configuration space for the PCI controller. | |
| @retval EFI_INVALID_PARAMETER Invalid Width/BarIndex or Bar type. | |
| @retval EFI_SUCCESS Successfully verified. | |
| **/ | |
| EFI_STATUS | |
| PciIoVerifyBarAccess ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT8 BarIndex, | |
| IN PCI_BAR_TYPE Type, | |
| IN IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN IN UINTN Count, | |
| IN UINT64 *Offset | |
| ); | |
| /** | |
| Verifies access to a PCI Configuration Header. | |
| @param PciIoDevice Pci device instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Offset The offset within the PCI configuration space for the PCI controller. | |
| @retval EFI_INVALID_PARAMETER Invalid Width | |
| @retval EFI_UNSUPPORTED Offset overflowed. | |
| @retval EFI_SUCCESS Successfully verified. | |
| **/ | |
| EFI_STATUS | |
| PciIoVerifyConfigAccess ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINTN Count, | |
| IN UINT64 *Offset | |
| ); | |
| /** | |
| Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is | |
| satisfied or after a defined duration. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory operation. | |
| @param Mask Mask used for the polling criteria. | |
| @param Value The comparison value used for the polling exit criteria. | |
| @param Delay The number of 100 ns units to poll. | |
| @param Result Pointer to the last value read from the memory location. | |
| @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED Offset is not valid for the BarIndex of this PCI controller. | |
| @retval EFI_TIMEOUT Delay expired before a match occurred. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoPollMem ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINT64 Mask, | |
| IN UINT64 Value, | |
| IN UINT64 Delay, | |
| OUT UINT64 *Result | |
| ); | |
| /** | |
| Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is | |
| satisfied or after a defined duration. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory operation. | |
| @param Mask Mask used for the polling criteria. | |
| @param Value The comparison value used for the polling exit criteria. | |
| @param Delay The number of 100 ns units to poll. | |
| @param Result Pointer to the last value read from the memory location. | |
| @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED Offset is not valid for the BarIndex of this PCI controller. | |
| @retval EFI_TIMEOUT Delay expired before a match occurred. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoPollIo ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINT64 Mask, | |
| IN UINT64 Value, | |
| IN UINT64 Delay, | |
| OUT UINT64 *Result | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory or I/O operation. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI BAR specified by BarIndex. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMemRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory or I/O operation. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI BAR specified by BarIndex. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMemWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory or I/O operation. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI BAR specified by BarIndex. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoIoRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory or I/O operations. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param Offset The offset within the selected BAR to start the memory or I/O operation. | |
| @param Count The number of memory or I/O operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI BAR specified by BarIndex. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoIoWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in PCI configuration space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory operations. | |
| @param Offset The offset within the PCI configuration space for the PCI controller. | |
| @param Count The number of PCI configuration operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI configuration header of the PCI controller. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER Buffer is NULL or Width is invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoConfigRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT32 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enable a PCI driver to access PCI controller registers in PCI configuration space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory operations. | |
| @param Offset The offset within the PCI configuration space for the PCI controller. | |
| @param Count The number of PCI configuration operations to perform. | |
| @param Buffer For read operations, the destination buffer to store the results. For write | |
| operations, the source buffer to write data from. | |
| @retval EFI_SUCCESS The data was read from or written to the PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not | |
| valid for the PCI configuration header of the PCI controller. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_INVALID_PARAMETER Buffer is NULL or Width is invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoConfigWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT32 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| Enables a PCI driver to copy one region of PCI memory space to another region of PCI | |
| memory space. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Width Signifies the width of the memory operations. | |
| @param DestBarIndex The BAR index in the standard PCI Configuration header to use as the | |
| base address for the memory operation to perform. | |
| @param DestOffset The destination offset within the BAR specified by DestBarIndex to | |
| start the memory writes for the copy operation. | |
| @param SrcBarIndex The BAR index in the standard PCI Configuration header to use as the | |
| base address for the memory operation to perform. | |
| @param SrcOffset The source offset within the BAR specified by SrcBarIndex to start | |
| the memory reads for the copy operation. | |
| @param Count The number of memory operations to perform. Bytes moved is Width | |
| size * Count, starting at DestOffset and SrcOffset. | |
| @retval EFI_SUCCESS The data was copied from one memory region to another memory region. | |
| @retval EFI_UNSUPPORTED DestBarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED SrcBarIndex not valid for this PCI controller. | |
| @retval EFI_UNSUPPORTED The address range specified by DestOffset, Width, and Count | |
| is not valid for the PCI BAR specified by DestBarIndex. | |
| @retval EFI_UNSUPPORTED The address range specified by SrcOffset, Width, and Count is | |
| not valid for the PCI BAR specified by SrcBarIndex. | |
| @retval EFI_INVALID_PARAMETER Width is invalid. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoCopyMem ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 DestBarIndex, | |
| IN UINT64 DestOffset, | |
| IN UINT8 SrcBarIndex, | |
| IN UINT64 SrcOffset, | |
| IN UINTN Count | |
| ); | |
| /** | |
| Provides the PCI controller-specific addresses needed to access system memory. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Operation Indicates if the bus master is going to read or write to system memory. | |
| @param HostAddress The system memory address to map to the PCI controller. | |
| @param NumberOfBytes On input the number of bytes to map. On output the number of bytes | |
| that were mapped. | |
| @param DeviceAddress The resulting map address for the bus master PCI controller to use to | |
| access the hosts HostAddress. | |
| @param Mapping A resulting value to pass to Unmap(). | |
| @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. | |
| @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMap ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_OPERATION Operation, | |
| IN VOID *HostAddress, | |
| IN OUT UINTN *NumberOfBytes, | |
| OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, | |
| OUT VOID **Mapping | |
| ); | |
| /** | |
| Completes the Map() operation and releases any corresponding resources. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Mapping The mapping value returned from Map(). | |
| @retval EFI_SUCCESS The range was unmapped. | |
| @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoUnmap ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN VOID *Mapping | |
| ); | |
| /** | |
| Allocates pages that are suitable for an EfiPciIoOperationBusMasterCommonBuffer | |
| mapping. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Type This parameter is not used and must be ignored. | |
| @param MemoryType The type of memory to allocate, EfiBootServicesData or | |
| EfiRuntimeServicesData. | |
| @param Pages The number of pages to allocate. | |
| @param HostAddress A pointer to store the base system memory address of the | |
| allocated range. | |
| @param Attributes The requested bit mask of attributes for the allocated range. | |
| @retval EFI_SUCCESS The requested memory pages were allocated. | |
| @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are | |
| MEMORY_WRITE_COMBINE and MEMORY_CACHED. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoAllocateBuffer ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_ALLOCATE_TYPE Type, | |
| IN EFI_MEMORY_TYPE MemoryType, | |
| IN UINTN Pages, | |
| OUT VOID **HostAddress, | |
| IN UINT64 Attributes | |
| ); | |
| /** | |
| Frees memory that was allocated with AllocateBuffer(). | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Pages The number of pages to free. | |
| @param HostAddress The base system memory address of the allocated range. | |
| @retval EFI_SUCCESS The requested memory pages were freed. | |
| @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages | |
| was not allocated with AllocateBuffer(). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoFreeBuffer ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN UINTN Pages, | |
| IN VOID *HostAddress | |
| ); | |
| /** | |
| Flushes all PCI posted write transactions from a PCI host bridge to system memory. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host | |
| bridge to system memory. | |
| @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI | |
| host bridge due to a hardware error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoFlush ( | |
| IN EFI_PCI_IO_PROTOCOL *This | |
| ); | |
| /** | |
| Retrieves this PCI controller's current PCI bus number, device number, and function number. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param SegmentNumber The PCI controller's current PCI segment number. | |
| @param BusNumber The PCI controller's current PCI bus number. | |
| @param DeviceNumber The PCI controller's current PCI device number. | |
| @param FunctionNumber The PCI controller's current PCI function number. | |
| @retval EFI_SUCCESS The PCI controller location was returned. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoGetLocation ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| OUT UINTN *Segment, | |
| OUT UINTN *Bus, | |
| OUT UINTN *Device, | |
| OUT UINTN *Function | |
| ); | |
| /** | |
| Check BAR type for PCI resource. | |
| @param PciIoDevice PCI device instance. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for the memory or I/O operation to perform. | |
| @param BarType Memory or I/O. | |
| @retval TRUE Pci device's bar type is same with input BarType. | |
| @retval TRUE Pci device's bar type is not same with input BarType. | |
| **/ | |
| BOOLEAN | |
| CheckBarType ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT8 BarIndex, | |
| IN PCI_BAR_TYPE BarType | |
| ); | |
| /** | |
| Set/Disable new attributes to a Root Bridge. | |
| @param PciIoDevice Pci device instance. | |
| @param Attributes New attribute want to be set. | |
| @param Operation Set or Disable. | |
| @retval EFI_UNSUPPORTED If root bridge does not support change attribute. | |
| @retval EFI_SUCCESS Successfully set new attributs. | |
| **/ | |
| EFI_STATUS | |
| ModifyRootBridgeAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT64 Attributes, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
| ); | |
| /** | |
| Check whether this device can be enable/disable to snoop. | |
| @param PciIoDevice Pci device instance. | |
| @param Operation Enable/Disable. | |
| @retval EFI_UNSUPPORTED Pci device is not GFX device or not support snoop. | |
| @retval EFI_SUCCESS Snoop can be supported. | |
| **/ | |
| EFI_STATUS | |
| SupportPaletteSnoopAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
| ); | |
| /** | |
| Performs an operation on the attributes that this PCI controller supports. The operations include | |
| getting the set of supported attributes, retrieving the current attributes, setting the current | |
| attributes, enabling attributes, and disabling attributes. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Operation The operation to perform on the attributes for this PCI controller. | |
| @param Attributes The mask of attributes that are used for Set, Enable, and Disable | |
| operations. | |
| @param Result A pointer to the result mask of attributes that are returned for the Get | |
| and Supported operations. | |
| @retval EFI_SUCCESS The operation on the PCI controller's attributes was completed. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| @retval EFI_UNSUPPORTED one or more of the bits set in | |
| Attributes are not supported by this PCI controller or one of | |
| its parent bridges when Operation is Set, Enable or Disable. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL * This, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
| IN UINT64 Attributes, | |
| OUT UINT64 *Result OPTIONAL | |
| ); | |
| /** | |
| Gets the attributes that this PCI controller supports setting on a BAR using | |
| SetBarAttributes(), and retrieves the list of resource descriptors for a BAR. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for resource range. The legal range for this field is 0..5. | |
| @param Supports A pointer to the mask of attributes that this PCI controller supports | |
| setting for this BAR with SetBarAttributes(). | |
| @param Resources A pointer to the ACPI 2.0 resource descriptors that describe the current | |
| configuration of this BAR of the PCI controller. | |
| @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI | |
| controller supports are returned in Supports. If Resources | |
| is not NULL, then the ACPI 2.0 resource descriptors that the PCI | |
| controller is currently using are returned in Resources. | |
| @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources available to allocate | |
| Resources. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoGetBarAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL * This, | |
| IN UINT8 BarIndex, | |
| OUT UINT64 *Supports, OPTIONAL | |
| OUT VOID **Resources OPTIONAL | |
| ); | |
| /** | |
| Sets the attributes for a range of a BAR on a PCI controller. | |
| @param This A pointer to the EFI_PCI_IO_PROTOCOL instance. | |
| @param Attributes The mask of attributes to set for the resource range specified by | |
| BarIndex, Offset, and Length. | |
| @param BarIndex The BAR index of the standard PCI Configuration header to use as the | |
| base address for resource range. The legal range for this field is 0..5. | |
| @param Offset A pointer to the BAR relative base address of the resource range to be | |
| modified by the attributes specified by Attributes. | |
| @param Length A pointer to the length of the resource range to be modified by the | |
| attributes specified by Attributes. | |
| @retval EFI_SUCCESS The set of attributes specified by Attributes for the resource | |
| range specified by BarIndex, Offset, and Length were | |
| set on the PCI controller, and the actual resource range is returned | |
| in Offset and Length. | |
| @retval EFI_INVALID_PARAMETER Offset or Length is NULL. | |
| @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller. | |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources to set the attributes on the | |
| resource range specified by BarIndex, Offset, and | |
| Length. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoSetBarAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN UINT64 Attributes, | |
| IN UINT8 BarIndex, | |
| IN OUT UINT64 *Offset, | |
| IN OUT UINT64 *Length | |
| ); | |
| /** | |
| Program parent bridge's attribute recurrently. | |
| @param PciIoDevice Child Pci device instance | |
| @param Operation The operation to perform on the attributes for this PCI controller. | |
| @param Attributes The mask of attributes that are used for Set, Enable, and Disable | |
| operations. | |
| @retval EFI_SUCCESS The operation on the PCI controller's attributes was completed. | |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
| @retval EFI_UNSUPPORTED one or more of the bits set in | |
| Attributes are not supported by this PCI controller or one of | |
| its parent bridges when Operation is Set, Enable or Disable. | |
| **/ | |
| EFI_STATUS | |
| UpStreamBridgesAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
| IN UINT64 Attributes | |
| ); | |
| /** | |
| Test whether two Pci devices has same parent bridge. | |
| @param PciDevice1 The first pci device for testing. | |
| @param PciDevice2 The second pci device for testing. | |
| @retval TRUE Two Pci device has the same parent bridge. | |
| @retval FALSE Two Pci device has not the same parent bridge. | |
| **/ | |
| BOOLEAN | |
| PciDevicesOnTheSamePath ( | |
| IN PCI_IO_DEVICE *PciDevice1, | |
| IN PCI_IO_DEVICE *PciDevice2 | |
| ); | |
| #endif |