MdeModulePkg/Universal/Network/SnpDxe/transmit.c

/** @file
Copyright (c) 2004 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

Module name:

    transmit.c

Abstract:

Revision history:
  2000-Feb-03 M(f)J   Genesis.

**/

#include "Snp.h"


/**
  This routine calls undi to create the meadia header for the given data buffer.

  @param  snp                 pointer to SNP driver structure
  @param  MacHeaderPtr        address where the media header will be filled in.
  @param  MacHeaderSize       size of the memory at MacHeaderPtr
  @param  BufferPtr           data buffer pointer
  @param  BufferLength        Size of data in the BufferPtr
  @param  DestinationAddrPtr  address of the destination mac address buffer
  @param  SourceAddrPtr       address of the source mac address buffer
  @param  ProtocolPtr         address of the protocol type

  @retval EFI_SUCCESS         if successfully completed the undi call
  @retval Other               error return from undi call.

**/
STATIC
EFI_STATUS
pxe_fillheader (
  SNP_DRIVER      *snp,
  VOID            *MacHeaderPtr,
  UINTN           MacHeaderSize,
  VOID            *BufferPtr,
  UINTN           BufferLength,
  EFI_MAC_ADDRESS *DestinationAddrPtr,
  EFI_MAC_ADDRESS *SourceAddrPtr,
  UINT16          *ProtocolPtr
  )
{
  PXE_CPB_FILL_HEADER_FRAGMENTED  *cpb;
  EFI_STATUS                      Status;
  struct s_v2p                    *pkt_v2p;
  UINT64                          TempData;

  cpb = snp->cpb;
  if (SourceAddrPtr) {
    CopyMem (
      (VOID *) cpb->SrcAddr,
      (VOID *) SourceAddrPtr,
      snp->mode.HwAddressSize
      );
  } else {
    CopyMem (
      (VOID *) cpb->SrcAddr,
      (VOID *) &(snp->mode.CurrentAddress),
      snp->mode.HwAddressSize
      );
  }

  CopyMem (
    (VOID *) cpb->DestAddr,
    (VOID *) DestinationAddrPtr,
    snp->mode.HwAddressSize
    );

  //
  // we need to do the byte swapping
  //
  cpb->Protocol             = (UINT16) PXE_SWAP_UINT16 (*ProtocolPtr);

  cpb->PacketLen            = (UINT32) (BufferLength);
  cpb->MediaHeaderLen       = (UINT16) MacHeaderSize;

  cpb->FragCnt              = 2;
  cpb->reserved             = 0;

  cpb->FragDesc[0].FragAddr = (UINT64)(UINTN) MacHeaderPtr;
  cpb->FragDesc[0].FragLen  = (UINT32) MacHeaderSize;
  cpb->FragDesc[1].FragAddr = (UINT64)(UINTN) BufferPtr;
  cpb->FragDesc[1].FragLen  = (UINT32) BufferLength;

  cpb->FragDesc[0].reserved = cpb->FragDesc[1].reserved = 0;

  if (snp->IsOldUndi) {
    TempData = (UINT64) (UINTN) MacHeaderPtr;
    if (TempData >= FOUR_GIGABYTES) {
      cpb->FragDesc[0].FragAddr = (UINT64) (UINTN) snp->fill_hdr_buf;
      cpb->FragDesc[0].FragLen  = (UINT32) snp->init_info.MediaHeaderLen;
    }

    TempData = (UINT64) (UINTN) (BufferPtr);
    if (TempData >= FOUR_GIGABYTES) {
      //
      // Let the device just read this buffer
      //
      Status = add_v2p (
                &pkt_v2p,
                EfiPciIoOperationBusMasterRead,
                BufferPtr,
                BufferLength
                );
      if (Status != EFI_SUCCESS) {
        return Status;
      }
      //
      // give the virtual address to UNDI and it will call back on Virt2Phys
      // to get the mapped address, if it needs it
      //
      cpb->FragDesc[1].FragLen = (UINT32) pkt_v2p->bsize;
    }
  }

  snp->cdb.OpCode     = PXE_OPCODE_FILL_HEADER;
  snp->cdb.OpFlags    = PXE_OPFLAGS_FILL_HEADER_FRAGMENTED;

  snp->cdb.DBsize     = PXE_DBSIZE_NOT_USED;
  snp->cdb.DBaddr     = PXE_DBADDR_NOT_USED;

  snp->cdb.CPBsize    = sizeof (PXE_CPB_FILL_HEADER_FRAGMENTED);
  snp->cdb.CPBaddr    = (UINT64)(UINTN) cpb;

  snp->cdb.StatCode   = PXE_STATCODE_INITIALIZE;
  snp->cdb.StatFlags  = PXE_STATFLAGS_INITIALIZE;
  snp->cdb.IFnum      = snp->if_num;
  snp->cdb.Control    = PXE_CONTROL_LAST_CDB_IN_LIST;

  //
  // Issue UNDI command and check result.
  //
  DEBUG ((EFI_D_NET, "\nsnp->undi.fill_header()  "));

  (*snp->issue_undi32_command) ((UINT64) (UINTN) &snp->cdb);

  if (snp->IsOldUndi) {
    TempData = (UINT64) (UINTN) (BufferPtr);
    if (TempData >= FOUR_GIGABYTES) {
      del_v2p (BufferPtr);
    }
    //
    // if we used the global buffer for header, copy the contents
    //
    TempData = (UINT64) (UINTN) MacHeaderPtr;
    if (TempData >= FOUR_GIGABYTES) {
      CopyMem (
        MacHeaderPtr,
        snp->fill_hdr_buf,
        snp->init_info.MediaHeaderLen
        );
    }
  }

  switch (snp->cdb.StatCode) {
  case PXE_STATCODE_SUCCESS:
    return EFI_SUCCESS;

  case PXE_STATCODE_INVALID_PARAMETER:
    DEBUG (
      (EFI_D_ERROR,
      "\nsnp->undi.fill_header()  %xh:%xh\n",
      snp->cdb.StatFlags,
      snp->cdb.StatCode)
      );

    return EFI_INVALID_PARAMETER;

  default:
    DEBUG (
      (EFI_D_ERROR,
      "\nsnp->undi.fill_header()  %xh:%xh\n",
      snp->cdb.StatFlags,
      snp->cdb.StatCode)
      );

    return EFI_DEVICE_ERROR;
  }
}


/**
  This routine calls undi to transmit the given data buffer

  @param  snp                 pointer to SNP driver structure
  @param  BufferPtr           data buffer pointer
  @param  BufferLength        Size of data in the BufferPtr

  @retval EFI_SUCCESS         if successfully completed the undi call
  @retval Other               error return from undi call.

**/
STATIC
EFI_STATUS
pxe_transmit (
  SNP_DRIVER *snp,
  VOID       *BufferPtr,
  UINTN      BufferLength
  )
{
  PXE_CPB_TRANSMIT  *cpb;
  EFI_STATUS        Status;
  struct s_v2p      *v2p;
  UINT64            TempData;

  cpb             = snp->cpb;
  cpb->FrameAddr  = (UINT64) (UINTN) BufferPtr;
  cpb->DataLen    = (UINT32) BufferLength;
  
  TempData = (UINT64) (UINTN) BufferPtr;
  if (snp->IsOldUndi && (TempData >= FOUR_GIGABYTES)) {
    //
    // we need to create a mapping now and give it to the undi when it calls
    // the Virt2Phys on this address.
    // this is a transmit, just map it for the device to READ
    //
    Status = add_v2p (
              &v2p,
              EfiPciIoOperationBusMasterRead,
              BufferPtr,
              BufferLength
              );
    if (Status != EFI_SUCCESS) {
      return Status;
    }

    cpb->DataLen = (UINT32) v2p->bsize;
  }

  cpb->MediaheaderLen = 0;
  cpb->reserved       = 0;

  snp->cdb.OpFlags    = PXE_OPFLAGS_TRANSMIT_WHOLE;

  snp->cdb.CPBsize    = sizeof (PXE_CPB_TRANSMIT);
  snp->cdb.CPBaddr    = (UINT64)(UINTN) cpb;

  snp->cdb.OpCode     = PXE_OPCODE_TRANSMIT;
  snp->cdb.DBsize     = PXE_DBSIZE_NOT_USED;
  snp->cdb.DBaddr     = PXE_DBADDR_NOT_USED;

  snp->cdb.StatCode   = PXE_STATCODE_INITIALIZE;
  snp->cdb.StatFlags  = PXE_STATFLAGS_INITIALIZE;
  snp->cdb.IFnum      = snp->if_num;
  snp->cdb.Control    = PXE_CONTROL_LAST_CDB_IN_LIST;

  //
  // Issue UNDI command and check result.
  //
  DEBUG ((EFI_D_NET, "\nsnp->undi.transmit()  "));
  DEBUG ((EFI_D_NET, "\nsnp->cdb.OpCode  == %x", snp->cdb.OpCode));
  DEBUG ((EFI_D_NET, "\nsnp->cdb.CPBaddr == %X", snp->cdb.CPBaddr));
  DEBUG ((EFI_D_NET, "\nsnp->cdb.DBaddr  == %X", snp->cdb.DBaddr));
  DEBUG ((EFI_D_NET, "\ncpb->FrameAddr   == %X\n", cpb->FrameAddr));

  (*snp->issue_undi32_command) ((UINT64) (UINTN) &snp->cdb);

  DEBUG ((EFI_D_NET, "\nexit snp->undi.transmit()  "));
  DEBUG ((EFI_D_NET, "\nsnp->cdb.StatCode == %r", snp->cdb.StatCode));

  //
  // we will unmap the buffers in get_status call, not here
  //
  switch (snp->cdb.StatCode) {
  case PXE_STATCODE_SUCCESS:
    return EFI_SUCCESS;

  case PXE_STATCODE_QUEUE_FULL:
  case PXE_STATCODE_BUSY:
    Status = EFI_NOT_READY;
    break;

  default:
    Status = EFI_DEVICE_ERROR;
  }

  DEBUG (
    (EFI_D_ERROR,
    "\nsnp->undi.transmit()  %xh:%xh\n",
    snp->cdb.StatFlags,
    snp->cdb.StatCode)
    );

  return Status;
}


/**
  This is the snp interface routine for transmitting a packet. this routine
  basically retrieves the snp structure, checks the snp state and calls
  pxe_fill_header and pxe_transmit calls to complete the transmission.

  @param  this                pointer to SNP driver context
  @param  MacHeaderSize       size of the memory at MacHeaderPtr
  @param  BufferLength        Size of data in the BufferPtr
  @param  BufferPtr           data buffer pointer
  @param  SourceAddrPtr       address of the source mac address buffer
  @param  DestinationAddrPtr  address of the destination mac address buffer
  @param  ProtocolPtr         address of the protocol type

  @retval EFI_SUCCESS         if successfully completed the undi call
  @retval Other               error return from undi call.

**/
EFI_STATUS
EFIAPI
snp_undi32_transmit (
  IN EFI_SIMPLE_NETWORK_PROTOCOL * this,
  IN UINTN                       MacHeaderSize,
  IN UINTN                       BufferLength,
  IN VOID                        *BufferPtr,
  IN EFI_MAC_ADDRESS             * SourceAddrPtr OPTIONAL,
  IN EFI_MAC_ADDRESS             * DestinationAddrPtr OPTIONAL,
  IN UINT16                      *ProtocolPtr OPTIONAL
  )
{
  SNP_DRIVER  *snp;
  EFI_STATUS  Status;
  EFI_TPL     OldTpl;

  if (this == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  snp = EFI_SIMPLE_NETWORK_DEV_FROM_THIS (this);

  OldTpl = gBS->RaiseTPL (TPL_CALLBACK);

  if (snp == NULL) {
    return EFI_DEVICE_ERROR;
  }

  switch (snp->mode.State) {
  case EfiSimpleNetworkInitialized:
    break;

  case EfiSimpleNetworkStopped:
    Status = EFI_NOT_STARTED;
    goto ON_EXIT;

  default:
    Status = EFI_DEVICE_ERROR;
    goto ON_EXIT;
  }

  if (BufferPtr == NULL) {
    Status = EFI_INVALID_PARAMETER;
    goto ON_EXIT;
  }

  if (BufferLength < snp->mode.MediaHeaderSize) {
    Status = EFI_BUFFER_TOO_SMALL;
    goto ON_EXIT;
  }

  //
  // if the MacHeaderSize is non-zero, we need to fill up the header and for that
  // we need the destination address and the protocol
  //
  if (MacHeaderSize != 0) {
    if (MacHeaderSize != snp->mode.MediaHeaderSize || DestinationAddrPtr == 0 || ProtocolPtr == 0) {
      Status = EFI_INVALID_PARAMETER;
      goto ON_EXIT;
    }

    Status = pxe_fillheader (
              snp,
              BufferPtr,
              MacHeaderSize,
              (UINT8 *) BufferPtr + MacHeaderSize,
              BufferLength - MacHeaderSize,
              DestinationAddrPtr,
              SourceAddrPtr,
              ProtocolPtr
              );

    if (EFI_ERROR (Status)) {
      goto ON_EXIT;
    }
  }

  Status = pxe_transmit (snp, BufferPtr, BufferLength);

ON_EXIT:
  gBS->RestoreTPL (OldTpl);

  return Status;
}