| /**@file | |
| Copyright (c) 2006, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "pcibus.h" | |
| // | |
| // Internal use only | |
| // | |
| STATIC | |
| EFI_STATUS | |
| ReportErrorStatusCode ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_STATUS_CODE_VALUE Code | |
| ); | |
| // | |
| // PCI I/O Support Function Prototypes | |
| // | |
| // | |
| // | |
| // Pci Io Protocol Interface | |
| // | |
| static EFI_PCI_IO_PROTOCOL PciIoInterface = { | |
| PciIoPollMem, | |
| PciIoPollIo, | |
| { | |
| PciIoMemRead, | |
| PciIoMemWrite | |
| }, | |
| { | |
| PciIoIoRead, | |
| PciIoIoWrite | |
| }, | |
| { | |
| PciIoConfigRead, | |
| PciIoConfigWrite | |
| }, | |
| PciIoCopyMem, | |
| PciIoMap, | |
| PciIoUnmap, | |
| PciIoAllocateBuffer, | |
| PciIoFreeBuffer, | |
| PciIoFlush, | |
| PciIoGetLocation, | |
| PciIoAttributes, | |
| PciIoGetBarAttributes, | |
| PciIoSetBarAttributes, | |
| 0, | |
| NULL | |
| }; | |
| STATIC | |
| EFI_STATUS | |
| ReportErrorStatusCode ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_STATUS_CODE_VALUE Code | |
| ) | |
| /*++ | |
| Routine Description: | |
| report a error Status code of PCI bus driver controller | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Code - add argument and description to function comment | |
| { | |
| return REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
| EFI_ERROR_CODE | EFI_ERROR_MINOR, | |
| Code, | |
| PciIoDevice->DevicePath | |
| ); | |
| } | |
| EFI_STATUS | |
| InitializePciIoInstance ( | |
| PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Initializes a PCI I/O Instance | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| CopyMem (&PciIoDevice->PciIo, &PciIoInterface, sizeof (EFI_PCI_IO_PROTOCOL)); | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PciIoVerifyBarAccess ( | |
| PCI_IO_DEVICE *PciIoDevice, | |
| UINT8 BarIndex, | |
| PCI_BAR_TYPE Type, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINTN Count, | |
| UINT64 *Offset | |
| ) | |
| /*++ | |
| Routine Description: | |
| Verifies access to a PCI Base Address Register (BAR) | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Type - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (BarIndex == EFI_PCI_IO_PASS_THROUGH_BAR) { | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // BarIndex 0-5 is legal | |
| // | |
| if (BarIndex >= PCI_MAX_BAR) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!CheckBarType (PciIoDevice, BarIndex, Type)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // If Width is EfiPciIoWidthFifoUintX then convert to EfiPciIoWidthUintX | |
| // If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX | |
| // | |
| if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { | |
| Count = 1; | |
| } | |
| Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & 0x03); | |
| if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PciIoDevice->PciBar[BarIndex].Length) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| *Offset = *Offset + PciIoDevice->PciBar[BarIndex].BaseAddress; | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PciIoVerifyConfigAccess ( | |
| PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINTN Count, | |
| IN UINT64 *Offset | |
| ) | |
| /*++ | |
| Routine Description: | |
| Verifies access to a PCI Config Header | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| UINT64 ExtendOffset; | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX | |
| // | |
| Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & 0x03); | |
| if (PciIoDevice->IsPciExp) { | |
| if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_EXP_MAX_CONFIG_OFFSET) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| ExtendOffset = LShiftU64 (*Offset, 32); | |
| *Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, 0); | |
| *Offset = (*Offset) | ExtendOffset; | |
| } else { | |
| if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_MAX_CONFIG_OFFSET) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| *Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, *Offset); | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoPollMem ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINT64 Mask, | |
| IN UINT64 Value, | |
| IN UINT64 Delay, | |
| OUT UINT64 *Result | |
| ) | |
| /*++ | |
| Routine Description: | |
| Poll PCI Memmory | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Mask - add argument and description to function comment | |
| // TODO: Value - add argument and description to function comment | |
| // TODO: Delay - add argument and description to function comment | |
| // TODO: Result - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, 1, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| if (Width > EfiPciIoWidthUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->PollMem ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Mask, | |
| Value, | |
| Delay, | |
| Result | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoPollIo ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINT64 Mask, | |
| IN UINT64 Value, | |
| IN UINT64 Delay, | |
| OUT UINT64 *Result | |
| ) | |
| /*++ | |
| Routine Description: | |
| Poll PCI IO | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Mask - add argument and description to function comment | |
| // TODO: Value - add argument and description to function comment | |
| // TODO: Delay - add argument and description to function comment | |
| // TODO: Result - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width > EfiPciIoWidthUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, 1, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->PollIo ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Mask, | |
| Value, | |
| Delay, | |
| Result | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMemRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI Memory Read Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Mem.Read ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMemWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI Memory Write Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Mem.Write ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoIoRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI I/O Read Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Io.Read ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoIoWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 BarIndex, | |
| IN UINT64 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI I/O Write Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Io.Write ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Offset, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoConfigRead ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT32 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI Configuration Read Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| UINT64 Address; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| Address = Offset; | |
| Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Pci.Read ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Address, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoConfigWrite ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT32 Offset, | |
| IN UINTN Count, | |
| IN OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Performs a PCI Configuration Write Cycle | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: Buffer - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| UINT64 Address; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| Address = Offset; | |
| Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Pci.Write ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| Address, | |
| Count, | |
| Buffer | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoCopyMem ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
| IN UINT8 DestBarIndex, | |
| IN UINT64 DestOffset, | |
| IN UINT8 SrcBarIndex, | |
| IN UINT64 SrcOffset, | |
| IN UINTN Count | |
| ) | |
| /*++ | |
| Routine Description: | |
| Copy PCI Memory | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Width - add argument and description to function comment | |
| // TODO: DestBarIndex - add argument and description to function comment | |
| // TODO: DestOffset - add argument and description to function comment | |
| // TODO: SrcBarIndex - add argument and description to function comment | |
| // TODO: SrcOffset - add argument and description to function comment | |
| // TODO: Count - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (Width == EfiPciIoWidthFifoUint8 || | |
| Width == EfiPciIoWidthFifoUint16 || | |
| Width == EfiPciIoWidthFifoUint32 || | |
| Width == EfiPciIoWidthFifoUint64 || | |
| Width == EfiPciIoWidthFillUint8 || | |
| Width == EfiPciIoWidthFillUint16 || | |
| Width == EfiPciIoWidthFillUint32 || | |
| Width == EfiPciIoWidthFillUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, DestBarIndex, PciBarTypeMem, Width, Count, &DestOffset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoVerifyBarAccess (PciIoDevice, SrcBarIndex, PciBarTypeMem, Width, Count, &SrcOffset); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->CopyMem ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
| DestOffset, | |
| SrcOffset, | |
| Count | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoMap ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_PCI_IO_PROTOCOL_OPERATION Operation, | |
| IN VOID *HostAddress, | |
| IN OUT UINTN *NumberOfBytes, | |
| OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, | |
| OUT VOID **Mapping | |
| ) | |
| /*++ | |
| Routine Description: | |
| Maps a memory region for DMA | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Operation - add argument and description to function comment | |
| // TODO: HostAddress - add argument and description to function comment | |
| // TODO: NumberOfBytes - add argument and description to function comment | |
| // TODO: DeviceAddress - add argument and description to function comment | |
| // TODO: Mapping - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Operation < 0 || Operation >= EfiPciIoOperationMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) { | |
| Operation = (EFI_PCI_IO_PROTOCOL_OPERATION) (Operation + EfiPciOperationBusMasterRead64); | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->Map ( | |
| PciIoDevice->PciRootBridgeIo, | |
| (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION) Operation, | |
| HostAddress, | |
| NumberOfBytes, | |
| DeviceAddress, | |
| Mapping | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoUnmap ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN VOID *Mapping | |
| ) | |
| /*++ | |
| Routine Description: | |
| Unmaps a memory region for DMA | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Mapping - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| Status = PciIoDevice->PciRootBridgeIo->Unmap ( | |
| PciIoDevice->PciRootBridgeIo, | |
| Mapping | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoAllocateBuffer ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN EFI_ALLOCATE_TYPE Type, | |
| IN EFI_MEMORY_TYPE MemoryType, | |
| IN UINTN Pages, | |
| OUT VOID **HostAddress, | |
| IN UINT64 Attributes | |
| ) | |
| /*++ | |
| Routine Description: | |
| Allocates a common buffer for DMA | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Type - add argument and description to function comment | |
| // TODO: MemoryType - add argument and description to function comment | |
| // TODO: Pages - add argument and description to function comment | |
| // TODO: HostAddress - add argument and description to function comment | |
| // TODO: Attributes - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| if (Attributes & | |
| (~(EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE | EFI_PCI_ATTRIBUTE_MEMORY_CACHED))) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE; | |
| } | |
| Status = PciIoDevice->PciRootBridgeIo->AllocateBuffer ( | |
| PciIoDevice->PciRootBridgeIo, | |
| Type, | |
| MemoryType, | |
| Pages, | |
| HostAddress, | |
| Attributes | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoFreeBuffer ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN UINTN Pages, | |
| IN VOID *HostAddress | |
| ) | |
| /*++ | |
| Routine Description: | |
| Frees a common buffer | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Pages - add argument and description to function comment | |
| // TODO: HostAddress - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| Status = PciIoDevice->PciRootBridgeIo->FreeBuffer ( | |
| PciIoDevice->PciRootBridgeIo, | |
| Pages, | |
| HostAddress | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoFlush ( | |
| IN EFI_PCI_IO_PROTOCOL *This | |
| ) | |
| /*++ | |
| Routine Description: | |
| Flushes a DMA buffer | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| Status = PciIoDevice->PciRootBridgeIo->Flush ( | |
| PciIoDevice->PciRootBridgeIo | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoGetLocation ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| OUT UINTN *Segment, | |
| OUT UINTN *Bus, | |
| OUT UINTN *Device, | |
| OUT UINTN *Function | |
| ) | |
| /*++ | |
| Routine Description: | |
| Gets a PCI device's current bus number, device number, and function number. | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Segment - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Function - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Segment == NULL || Bus == NULL || Device == NULL || Function == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| *Segment = PciIoDevice->PciRootBridgeIo->SegmentNumber; | |
| *Bus = PciIoDevice->BusNumber; | |
| *Device = PciIoDevice->DeviceNumber; | |
| *Function = PciIoDevice->FunctionNumber; | |
| return EFI_SUCCESS; | |
| } | |
| BOOLEAN | |
| CheckBarType ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| UINT8 BarIndex, | |
| PCI_BAR_TYPE BarType | |
| ) | |
| /*++ | |
| Routine Description: | |
| Sets a PCI controllers attributes on a resource range | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: BarType - add argument and description to function comment | |
| { | |
| switch (BarType) { | |
| case PciBarTypeMem: | |
| if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem32 && | |
| PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem32 && | |
| PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem64 && | |
| PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem64 ) { | |
| return FALSE; | |
| } | |
| return TRUE; | |
| case PciBarTypeIo: | |
| if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo32 && | |
| PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo16){ | |
| return FALSE; | |
| } | |
| return TRUE; | |
| default: | |
| break; | |
| } | |
| return FALSE; | |
| } | |
| EFI_STATUS | |
| ModifyRootBridgeAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT64 Attributes, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
| ) | |
| /*++ | |
| Routine Description: | |
| Set new attributes to a Root Bridge | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Attributes - add argument and description to function comment | |
| // TODO: Operation - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| UINT64 PciRootBridgeSupports; | |
| UINT64 PciRootBridgeAttributes; | |
| UINT64 NewPciRootBridgeAttributes; | |
| EFI_STATUS Status; | |
| // | |
| // Get the current attributes of this PCI device's PCI Root Bridge | |
| // | |
| Status = PciIoDevice->PciRootBridgeIo->GetAttributes ( | |
| PciIoDevice->PciRootBridgeIo, | |
| &PciRootBridgeSupports, | |
| &PciRootBridgeAttributes | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Record the new attribute of the Root Bridge | |
| // | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| NewPciRootBridgeAttributes = PciRootBridgeAttributes | Attributes; | |
| } else { | |
| NewPciRootBridgeAttributes = PciRootBridgeAttributes & (~Attributes); | |
| } | |
| // | |
| // Call the PCI Root Bridge to attempt to modify the attributes | |
| // | |
| if (NewPciRootBridgeAttributes ^ PciRootBridgeAttributes) { | |
| Status = PciIoDevice->PciRootBridgeIo->SetAttributes ( | |
| PciIoDevice->PciRootBridgeIo, | |
| NewPciRootBridgeAttributes, | |
| NULL, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // The PCI Root Bridge could not modify the attributes, so return the error. | |
| // | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| // | |
| // Also update the attributes for this Root Bridge structure | |
| // | |
| PciIoDevice->Attributes = NewPciRootBridgeAttributes; | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| SupportPaletteSnoopAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check whether this device can be enable/disable to snoop | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Operation - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| PCI_IO_DEVICE *Temp; | |
| UINT16 VGACommand; | |
| // | |
| // Snoop attribute can be only modified by GFX | |
| // | |
| if (!IS_PCI_GFX (&PciIoDevice->Pci)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Get the boot VGA on the same segement | |
| // | |
| Temp = ActiveVGADeviceOnTheSameSegment (PciIoDevice); | |
| if (!Temp) { | |
| // | |
| // If there is no VGA device on the segement, set | |
| // this graphics card to decode the palette range | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Check these two agents are on the same path | |
| // | |
| if (!PciDevicesOnTheSamePath (Temp, PciIoDevice)) { | |
| // | |
| // they are not on the same path, so snoop can be enabled or disabled | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Check if they are on the same bus | |
| // | |
| if (Temp->Parent == PciIoDevice->Parent) { | |
| PciReadCommandRegister (Temp, &VGACommand); | |
| // | |
| // If they are on the same bus, either one can | |
| // be set to snoop, the other set to decode | |
| // | |
| if (VGACommand & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) { | |
| // | |
| // VGA has set to snoop, so GFX can be only set to disable snoop | |
| // | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } else { | |
| // | |
| // VGA has disabled to snoop, so GFX can be only enabled | |
| // | |
| if (Operation == EfiPciIoAttributeOperationDisable) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // If they are on the same path but on the different bus | |
| // The first agent is set to snoop, the second one set to | |
| // decode | |
| // | |
| if (Temp->BusNumber < PciIoDevice->BusNumber) { | |
| // | |
| // GFX should be set to decode | |
| // | |
| if (Operation == EfiPciIoAttributeOperationDisable) { | |
| PciEnableCommandRegister (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
| Temp->Attributes |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; | |
| } else { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } else { | |
| // | |
| // GFX should be set to snoop | |
| // | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| PciDisableCommandRegister (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
| Temp->Attributes &= (~EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
| } else { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL * This, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
| IN UINT64 Attributes, | |
| OUT UINT64 *Result OPTIONAL | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Operation - add argument and description to function comment | |
| // TODO: Attributes - add argument and description to function comment | |
| // TODO: Result - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PCI_IO_DEVICE *UpStreamBridge; | |
| PCI_IO_DEVICE *Temp; | |
| UINT64 Supports; | |
| UINT64 UpStreamAttributes; | |
| UINT16 BridgeControl; | |
| UINT16 Command; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| switch (Operation) { | |
| case EfiPciIoAttributeOperationGet: | |
| if (Result == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| *Result = PciIoDevice->Attributes; | |
| return EFI_SUCCESS; | |
| case EfiPciIoAttributeOperationSupported: | |
| if (Result == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| *Result = PciIoDevice->Supports; | |
| return EFI_SUCCESS; | |
| case EfiPciIoAttributeOperationSet: | |
| Status = PciIoDevice->PciIo.Attributes ( | |
| &(PciIoDevice->PciIo), | |
| EfiPciIoAttributeOperationEnable, | |
| Attributes, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Status = PciIoDevice->PciIo.Attributes ( | |
| &(PciIoDevice->PciIo), | |
| EfiPciIoAttributeOperationDisable, | |
| (~Attributes) & (PciIoDevice->Supports), | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| return EFI_SUCCESS; | |
| case EfiPciIoAttributeOperationEnable: | |
| case EfiPciIoAttributeOperationDisable: | |
| break; | |
| default: | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // Just a trick for ENABLE attribute | |
| // | |
| if ((Attributes & EFI_PCI_DEVICE_ENABLE) == EFI_PCI_DEVICE_ENABLE) { | |
| Attributes &= (PciIoDevice->Supports); | |
| // | |
| // Raise the EFI_P_PC_ENABLE Status code | |
| // | |
| REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
| EFI_PROGRESS_CODE, | |
| EFI_IO_BUS_PCI | EFI_P_PC_ENABLE, | |
| PciIoDevice->DevicePath | |
| ); | |
| } | |
| // | |
| // If no attributes can be supported, then return. | |
| // Otherwise, set the attributes that it can support. | |
| // | |
| Supports = (PciIoDevice->Supports) & Attributes; | |
| if (Supports != Attributes) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // For Root Bridge, just call RootBridgeIo to set attributes; | |
| // | |
| if (!PciIoDevice->Parent) { | |
| Status = ModifyRootBridgeAttributes (PciIoDevice, Attributes, Operation); | |
| return Status; | |
| } | |
| Command = 0; | |
| BridgeControl = 0; | |
| // | |
| // Check VGA and VGA16, they can not be set at the same time | |
| // | |
| if (((Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO) && | |
| (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) || | |
| ((Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO) && | |
| (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) || | |
| ((Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO) && | |
| (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) || | |
| ((Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO) && | |
| (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) ) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // For PPB & P2C, set relevant attribute bits | |
| // | |
| if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
| if (Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_IO | EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) { | |
| BridgeControl |= EFI_PCI_BRIDGE_CONTROL_VGA; | |
| } | |
| if (Attributes & EFI_PCI_IO_ATTRIBUTE_ISA_IO) { | |
| BridgeControl |= EFI_PCI_BRIDGE_CONTROL_ISA; | |
| } | |
| if (Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) { | |
| Command |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO; | |
| } | |
| if (Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 | EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) { | |
| BridgeControl |= EFI_PCI_BRIDGE_CONTROL_VGA_16; | |
| } | |
| } else { | |
| // | |
| // Do with the attributes on VGA | |
| // Only for VGA's legacy resource, we just can enable once. | |
| // | |
| if (Attributes & | |
| (EFI_PCI_IO_ATTRIBUTE_VGA_IO | | |
| EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 | | |
| EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY)) { | |
| // | |
| // Check if a VGA has been enabled before enabling a new one | |
| // | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| // | |
| // Check if there have been an active VGA device on the same segment | |
| // | |
| Temp = ActiveVGADeviceOnTheSameSegment (PciIoDevice); | |
| if (Temp && Temp != PciIoDevice) { | |
| // | |
| // An active VGA has been detected, so can not enable another | |
| // | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| } | |
| // | |
| // Do with the attributes on GFX | |
| // | |
| if (Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) { | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| // | |
| // Check if snoop can be enabled in current configuration | |
| // | |
| Status = SupportPaletteSnoopAttributes (PciIoDevice, Operation); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Enable operation is forbidden, so mask the bit in attributes | |
| // so as to keep consistent with the actual Status | |
| // | |
| // Attributes &= (~EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO); | |
| // | |
| // | |
| // | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| // | |
| // It can be supported, so get ready to set the bit | |
| // | |
| Command |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; | |
| } | |
| } | |
| if (Attributes & EFI_PCI_IO_ATTRIBUTE_IO) { | |
| Command |= EFI_PCI_COMMAND_IO_SPACE; | |
| } | |
| if (Attributes & EFI_PCI_IO_ATTRIBUTE_MEMORY) { | |
| Command |= EFI_PCI_COMMAND_MEMORY_SPACE; | |
| } | |
| if (Attributes & EFI_PCI_IO_ATTRIBUTE_BUS_MASTER) { | |
| Command |= EFI_PCI_COMMAND_BUS_MASTER; | |
| } | |
| // | |
| // The upstream bridge should be also set to revelant attribute | |
| // expect for IO, Mem and BusMaster | |
| // | |
| UpStreamAttributes = Attributes & | |
| (~(EFI_PCI_IO_ATTRIBUTE_IO | | |
| EFI_PCI_IO_ATTRIBUTE_MEMORY | | |
| EFI_PCI_IO_ATTRIBUTE_BUS_MASTER | |
| ) | |
| ); | |
| UpStreamBridge = PciIoDevice->Parent; | |
| if (Operation == EfiPciIoAttributeOperationEnable) { | |
| // | |
| // Enable relevant attributes to command register and bridge control register | |
| // | |
| Status = PciEnableCommandRegister (PciIoDevice, Command); | |
| if (BridgeControl) { | |
| Status = PciEnableBridgeControlRegister (PciIoDevice, BridgeControl); | |
| } | |
| PciIoDevice->Attributes |= Attributes; | |
| // | |
| // Enable attributes of the upstream bridge | |
| // | |
| Status = UpStreamBridge->PciIo.Attributes ( | |
| &(UpStreamBridge->PciIo), | |
| EfiPciIoAttributeOperationEnable, | |
| UpStreamAttributes, | |
| NULL | |
| ); | |
| } else { | |
| // | |
| // Disable relevant attributes to command register and bridge control register | |
| // | |
| Status = PciDisableCommandRegister (PciIoDevice, Command); | |
| if (BridgeControl) { | |
| Status = PciDisableBridgeControlRegister (PciIoDevice, BridgeControl); | |
| } | |
| PciIoDevice->Attributes &= (~Attributes); | |
| Status = EFI_SUCCESS; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
| } | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoGetBarAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL * This, | |
| IN UINT8 BarIndex, | |
| OUT UINT64 *Supports, OPTIONAL | |
| OUT VOID **Resources OPTIONAL | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Supports - add argument and description to function comment | |
| // TODO: Resources - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| UINT8 *Configuration; | |
| UINT8 NumConfig; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; | |
| EFI_ACPI_END_TAG_DESCRIPTOR *PtrEnd; | |
| NumConfig = 0; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| if (Supports == NULL && Resources == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (BarIndex >= PCI_MAX_BAR) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // This driver does not support modifications to the WRITE_COMBINE or | |
| // CACHED attributes for BAR ranges. | |
| // | |
| if (Supports != NULL) { | |
| *Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE; | |
| } | |
| if (Resources != NULL) { | |
| if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeUnknown) { | |
| NumConfig = 1; | |
| } | |
| Configuration = AllocatePool (sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) * NumConfig + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR)); | |
| if (Configuration == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| ZeroMem ( | |
| Configuration, | |
| sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) * NumConfig + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR) | |
| ); | |
| Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; | |
| if (NumConfig == 1) { | |
| Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; | |
| Ptr->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3; | |
| Ptr->AddrRangeMin = PciIoDevice->PciBar[BarIndex].BaseAddress; | |
| Ptr->AddrLen = PciIoDevice->PciBar[BarIndex].Length; | |
| Ptr->AddrRangeMax = PciIoDevice->PciBar[BarIndex].Alignment; | |
| switch (PciIoDevice->PciBar[BarIndex].BarType) { | |
| case PciBarTypeIo16: | |
| case PciBarTypeIo32: | |
| // | |
| // Io | |
| // | |
| Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; | |
| break; | |
| case PciBarTypeMem32: | |
| // | |
| // Mem | |
| // | |
| Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
| // | |
| // 32 bit | |
| // | |
| Ptr->AddrSpaceGranularity = 32; | |
| break; | |
| case PciBarTypePMem32: | |
| // | |
| // Mem | |
| // | |
| Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
| // | |
| // prefechable | |
| // | |
| Ptr->SpecificFlag = 0x6; | |
| // | |
| // 32 bit | |
| // | |
| Ptr->AddrSpaceGranularity = 32; | |
| break; | |
| case PciBarTypeMem64: | |
| // | |
| // Mem | |
| // | |
| Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
| // | |
| // 64 bit | |
| // | |
| Ptr->AddrSpaceGranularity = 64; | |
| break; | |
| case PciBarTypePMem64: | |
| // | |
| // Mem | |
| // | |
| Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
| // | |
| // prefechable | |
| // | |
| Ptr->SpecificFlag = 0x6; | |
| // | |
| // 64 bit | |
| // | |
| Ptr->AddrSpaceGranularity = 64; | |
| break; | |
| default: | |
| break; | |
| } | |
| Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) ((UINT8 *) Ptr + sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR)); | |
| } | |
| // | |
| // put the checksum | |
| // | |
| PtrEnd = (EFI_ACPI_END_TAG_DESCRIPTOR *) ((UINT8 *) Ptr); | |
| PtrEnd->Desc = ACPI_END_TAG_DESCRIPTOR; | |
| PtrEnd->Checksum = 0; | |
| *Resources = Configuration; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| PciIoSetBarAttributes ( | |
| IN EFI_PCI_IO_PROTOCOL *This, | |
| IN UINT64 Attributes, | |
| IN UINT8 BarIndex, | |
| IN OUT UINT64 *Offset, | |
| IN OUT UINT64 *Length | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Attributes - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: Length - add argument and description to function comment | |
| // TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| UINT64 NonRelativeOffset; | |
| UINT64 Supports; | |
| PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
| // | |
| // Make sure Offset and Length are not NULL | |
| // | |
| if (Offset == NULL || Length == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeUnknown) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // This driver does not support setting the WRITE_COMBINE or the CACHED attributes. | |
| // If Attributes is not 0, then return EFI_UNSUPPORTED. | |
| // | |
| Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE; | |
| if (Attributes != (Attributes & Supports)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Attributes must be supported. Make sure the BAR range describd by BarIndex, Offset, and | |
| // Length are valid for this PCI device. | |
| // | |
| NonRelativeOffset = *Offset; | |
| Status = PciIoVerifyBarAccess ( | |
| PciIoDevice, | |
| BarIndex, | |
| PciBarTypeMem, | |
| EfiPciIoWidthUint8, | |
| (UINT32) *Length, | |
| &NonRelativeOffset | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| UpStreamBridgesAttributes ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
| IN UINT64 Attributes | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Operation - add argument and description to function comment | |
| // TODO: Attributes - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| PCI_IO_DEVICE *Parent; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| Parent = PciIoDevice->Parent; | |
| while (Parent && IS_PCI_BRIDGE (&Parent->Pci)) { | |
| // | |
| // Get the PciIo Protocol | |
| // | |
| PciIo = &Parent->PciIo; | |
| PciIo->Attributes (PciIo, Operation, Attributes, NULL); | |
| Parent = Parent->Parent; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| BOOLEAN | |
| PciDevicesOnTheSamePath ( | |
| IN PCI_IO_DEVICE *PciDevice1, | |
| IN PCI_IO_DEVICE *PciDevice2 | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciDevice1 - add argument and description to function comment | |
| // TODO: PciDevice2 - add argument and description to function comment | |
| { | |
| BOOLEAN Existed1; | |
| BOOLEAN Existed2; | |
| if (PciDevice1->Parent == PciDevice2->Parent) { | |
| return TRUE; | |
| } | |
| Existed1 = PciDeviceExisted (PciDevice1->Parent, PciDevice2); | |
| Existed2 = PciDeviceExisted (PciDevice2->Parent, PciDevice1); | |
| return (BOOLEAN) (Existed1 || Existed2); | |
| } |