| /** @file | |
| Tiano PE/COFF loader. | |
| This PE/COFF loader supports loading any PE32 or PE32+ image type, but | |
| only supports relocating IA32, X64, IPF, and EBC images. | |
| Copyright (c) 2006, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: PeCoffLoader.c | |
| **/ | |
| #include "BasePeCoffLibInternals.h" | |
| /** | |
| Retrieves the magic value from the PE/COFF header. | |
| @param Hdr The buffer in which to return the PE32, PE32+, or TE header. | |
| @return EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC - Image is PE32 | |
| @return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC - Image is PE32+ | |
| **/ | |
| UINT16 | |
| PeCoffLoaderGetPeHeaderMagicValue ( | |
| IN EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr | |
| ) | |
| { | |
| // | |
| // NOTE: Some versions of Linux ELILO for Itanium have an incorrect magic value | |
| // in the PE/COFF Header. If the MachineType is Itanium(IA64) and the | |
| // Magic value in the OptionalHeader is EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC | |
| // then override the returned value to EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC | |
| // | |
| if (Hdr.Pe32->FileHeader.Machine == EFI_IMAGE_MACHINE_IA64 && Hdr.Pe32->OptionalHeader.Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC; | |
| } | |
| // | |
| // Return the magic value from the PC/COFF Optional Header | |
| // | |
| return Hdr.Pe32->OptionalHeader.Magic; | |
| } | |
| /** | |
| Retrieves the PE or TE Header from a PE/COFF or TE image. | |
| @param ImageContext The context of the image being loaded. | |
| @param Hdr The buffer in which to return the PE32, PE32+, or TE header. | |
| @retval RETURN_SUCCESS The PE or TE Header is read. | |
| @retval Other The error status from reading the PE/COFF or TE image using the ImageRead function. | |
| **/ | |
| RETURN_STATUS | |
| PeCoffLoaderGetPeHeader ( | |
| IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext, | |
| OUT EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr | |
| ) | |
| { | |
| RETURN_STATUS Status; | |
| EFI_IMAGE_DOS_HEADER DosHdr; | |
| UINTN Size; | |
| UINT16 Magic; | |
| // | |
| // Read the DOS image header to check for it's existance | |
| // | |
| Size = sizeof (EFI_IMAGE_DOS_HEADER); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| 0, | |
| &Size, | |
| &DosHdr | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| ImageContext->PeCoffHeaderOffset = 0; | |
| if (DosHdr.e_magic == EFI_IMAGE_DOS_SIGNATURE) { | |
| // | |
| // DOS image header is present, so read the PE header after the DOS image | |
| // header | |
| // | |
| ImageContext->PeCoffHeaderOffset = DosHdr.e_lfanew; | |
| } | |
| // | |
| // Read the PE/COFF Header. For PE32 (32-bit) this will read in too much | |
| // data, but that should not hurt anythine. Hdr.Pe32->OptionalHeader.Magic | |
| // determins if this is a PE32 or PE32+ image. The magic is in the same | |
| // location in both images. | |
| // | |
| Size = sizeof (EFI_IMAGE_OPTIONAL_HEADER_UNION); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| ImageContext->PeCoffHeaderOffset, | |
| &Size, | |
| Hdr.Pe32 | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| // | |
| // Use Signature to figure out if we understand the image format | |
| // | |
| if (Hdr.Te->Signature == EFI_TE_IMAGE_HEADER_SIGNATURE) { | |
| ImageContext->IsTeImage = TRUE; | |
| ImageContext->Machine = Hdr.Te->Machine; | |
| ImageContext->ImageType = (UINT16)(Hdr.Te->Subsystem); | |
| ImageContext->ImageSize = 0; | |
| ImageContext->SectionAlignment = 4096; | |
| ImageContext->SizeOfHeaders = sizeof (EFI_TE_IMAGE_HEADER) + (UINTN)Hdr.Te->BaseOfCode - (UINTN)Hdr.Te->StrippedSize; | |
| } else if (Hdr.Pe32->Signature == EFI_IMAGE_NT_SIGNATURE) { | |
| ImageContext->IsTeImage = FALSE; | |
| ImageContext->Machine = Hdr.Pe32->FileHeader.Machine; | |
| Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr); | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| ImageContext->ImageType = Hdr.Pe32->OptionalHeader.Subsystem; | |
| ImageContext->ImageSize = (UINT64)Hdr.Pe32->OptionalHeader.SizeOfImage; | |
| ImageContext->SectionAlignment = Hdr.Pe32->OptionalHeader.SectionAlignment; | |
| ImageContext->SizeOfHeaders = Hdr.Pe32->OptionalHeader.SizeOfHeaders; | |
| } else if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC) { | |
| // | |
| // Use PE32+ offset | |
| // | |
| ImageContext->ImageType = Hdr.Pe32Plus->OptionalHeader.Subsystem; | |
| ImageContext->ImageSize = (UINT64) Hdr.Pe32Plus->OptionalHeader.SizeOfImage; | |
| ImageContext->SectionAlignment = Hdr.Pe32Plus->OptionalHeader.SectionAlignment; | |
| ImageContext->SizeOfHeaders = Hdr.Pe32Plus->OptionalHeader.SizeOfHeaders; | |
| } else { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_MACHINE_TYPE; | |
| return RETURN_UNSUPPORTED; | |
| } | |
| } else { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_MACHINE_TYPE; | |
| return RETURN_UNSUPPORTED; | |
| } | |
| if (!PeCoffLoaderImageFormatSupported (ImageContext->Machine)) { | |
| // | |
| // If the PE/COFF loader does not support the image type return | |
| // unsupported. This library can suport lots of types of images | |
| // this does not mean the user of this library can call the entry | |
| // point of the image. | |
| // | |
| return RETURN_UNSUPPORTED; | |
| } | |
| return RETURN_SUCCESS; | |
| } | |
| /** | |
| Retrieves information about a PE/COFF image. | |
| Computes the PeCoffHeaderOffset, ImageAddress, ImageSize, DestinationAddress, CodeView, | |
| PdbPointer, RelocationsStripped, SectionAlignment, SizeOfHeaders, and DebugDirectoryEntryRva | |
| fields of the ImageContext structure. If ImageContext is NULL, then return RETURN_INVALID_PARAMETER. | |
| If the PE/COFF image accessed through the ImageRead service in the ImageContext structure is not | |
| a supported PE/COFF image type, then return RETURN_UNSUPPORTED. If any errors occur while | |
| computing the fields of ImageContext, then the error status is returned in the ImageError field of | |
| ImageContext. | |
| @param ImageContext Pointer to the image context structure that describes the PE/COFF | |
| image that needs to be examined by this function. | |
| @retval RETURN_SUCCESS The information on the PE/COFF image was collected. | |
| @retval RETURN_INVALID_PARAMETER ImageContext is NULL. | |
| @retval RETURN_UNSUPPORTED The PE/COFF image is not supported. | |
| **/ | |
| RETURN_STATUS | |
| EFIAPI | |
| PeCoffLoaderGetImageInfo ( | |
| IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext | |
| ) | |
| { | |
| RETURN_STATUS Status; | |
| EFI_IMAGE_OPTIONAL_HEADER_UNION HdrData; | |
| EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr; | |
| EFI_IMAGE_DATA_DIRECTORY *DebugDirectoryEntry; | |
| UINTN Size; | |
| UINTN Index; | |
| UINTN DebugDirectoryEntryRva; | |
| UINTN DebugDirectoryEntryFileOffset; | |
| UINTN SectionHeaderOffset; | |
| EFI_IMAGE_SECTION_HEADER SectionHeader; | |
| EFI_IMAGE_DEBUG_DIRECTORY_ENTRY DebugEntry; | |
| UINT32 NumberOfRvaAndSizes; | |
| UINT16 Magic; | |
| if (NULL == ImageContext) { | |
| return RETURN_INVALID_PARAMETER; | |
| } | |
| // | |
| // Assume success | |
| // | |
| ImageContext->ImageError = IMAGE_ERROR_SUCCESS; | |
| Hdr.Union = &HdrData; | |
| Status = PeCoffLoaderGetPeHeader (ImageContext, Hdr); | |
| if (RETURN_ERROR (Status)) { | |
| return Status; | |
| } | |
| Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr); | |
| // | |
| // Retrieve the base address of the image | |
| // | |
| if (!(ImageContext->IsTeImage)) { | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| ImageContext->ImageAddress = Hdr.Pe32->OptionalHeader.ImageBase; | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| ImageContext->ImageAddress = Hdr.Pe32Plus->OptionalHeader.ImageBase; | |
| } | |
| } else { | |
| ImageContext->ImageAddress = (PHYSICAL_ADDRESS)(Hdr.Te->ImageBase + Hdr.Te->StrippedSize - sizeof (EFI_TE_IMAGE_HEADER)); | |
| } | |
| // | |
| // Initialize the alternate destination address to 0 indicating that it | |
| // should not be used. | |
| // | |
| ImageContext->DestinationAddress = 0; | |
| // | |
| // Initialize the codeview pointer. | |
| // | |
| ImageContext->CodeView = NULL; | |
| ImageContext->PdbPointer = NULL; | |
| // | |
| // Three cases with regards to relocations: | |
| // - Image has base relocs, RELOCS_STRIPPED==0 => image is relocatable | |
| // - Image has no base relocs, RELOCS_STRIPPED==1 => Image is not relocatable | |
| // - Image has no base relocs, RELOCS_STRIPPED==0 => Image is relocatable but | |
| // has no base relocs to apply | |
| // Obviously having base relocations with RELOCS_STRIPPED==1 is invalid. | |
| // | |
| // Look at the file header to determine if relocations have been stripped, and | |
| // save this info in the image context for later use. | |
| // | |
| if ((!(ImageContext->IsTeImage)) && ((Hdr.Pe32->FileHeader.Characteristics & EFI_IMAGE_FILE_RELOCS_STRIPPED) != 0)) { | |
| ImageContext->RelocationsStripped = TRUE; | |
| } else { | |
| ImageContext->RelocationsStripped = FALSE; | |
| } | |
| if (!(ImageContext->IsTeImage)) { | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes; | |
| DebugDirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_DEBUG]); | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes; | |
| DebugDirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_DEBUG]); | |
| } | |
| if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_DEBUG) { | |
| DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress; | |
| // | |
| // Determine the file offset of the debug directory... This means we walk | |
| // the sections to find which section contains the RVA of the debug | |
| // directory | |
| // | |
| DebugDirectoryEntryFileOffset = 0; | |
| SectionHeaderOffset = (UINTN)( | |
| ImageContext->PeCoffHeaderOffset + | |
| sizeof (UINT32) + | |
| sizeof (EFI_IMAGE_FILE_HEADER) + | |
| Hdr.Pe32->FileHeader.SizeOfOptionalHeader | |
| ); | |
| for (Index = 0; Index < Hdr.Pe32->FileHeader.NumberOfSections; Index++) { | |
| // | |
| // Read section header from file | |
| // | |
| Size = sizeof (EFI_IMAGE_SECTION_HEADER); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| SectionHeaderOffset, | |
| &Size, | |
| &SectionHeader | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress && | |
| DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) { | |
| DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva - SectionHeader.VirtualAddress + SectionHeader.PointerToRawData; | |
| break; | |
| } | |
| SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER); | |
| } | |
| if (DebugDirectoryEntryFileOffset != 0) { | |
| for (Index = 0; Index < DebugDirectoryEntry->Size; Index += sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)) { | |
| // | |
| // Read next debug directory entry | |
| // | |
| Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| DebugDirectoryEntryFileOffset, | |
| &Size, | |
| &DebugEntry | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) { | |
| ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index); | |
| if (DebugEntry.RVA == 0 && DebugEntry.FileOffset != 0) { | |
| ImageContext->ImageSize += DebugEntry.SizeOfData; | |
| } | |
| return RETURN_SUCCESS; | |
| } | |
| } | |
| } | |
| } | |
| } else { | |
| DebugDirectoryEntry = &Hdr.Te->DataDirectory[1]; | |
| DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress; | |
| SectionHeaderOffset = (UINTN)(sizeof (EFI_TE_IMAGE_HEADER)); | |
| DebugDirectoryEntryFileOffset = 0; | |
| for (Index = 0; Index < Hdr.Te->NumberOfSections;) { | |
| // | |
| // Read section header from file | |
| // | |
| Size = sizeof (EFI_IMAGE_SECTION_HEADER); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| SectionHeaderOffset, | |
| &Size, | |
| &SectionHeader | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress && | |
| DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) { | |
| DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva - | |
| SectionHeader.VirtualAddress + | |
| SectionHeader.PointerToRawData + | |
| sizeof (EFI_TE_IMAGE_HEADER) - | |
| Hdr.Te->StrippedSize; | |
| // | |
| // File offset of the debug directory was found, if this is not the last | |
| // section, then skip to the last section for calculating the image size. | |
| // | |
| if (Index < (UINTN) Hdr.Te->NumberOfSections - 1) { | |
| SectionHeaderOffset += (Hdr.Te->NumberOfSections - 1 - Index) * sizeof (EFI_IMAGE_SECTION_HEADER); | |
| Index = Hdr.Te->NumberOfSections - 1; | |
| continue; | |
| } | |
| } | |
| // | |
| // In Te image header there is not a field to describe the ImageSize. | |
| // Actually, the ImageSize equals the RVA plus the VirtualSize of | |
| // the last section mapped into memory (Must be rounded up to | |
| // a mulitple of Section Alignment). Per the PE/COFF specification, the | |
| // section headers in the Section Table must appear in order of the RVA | |
| // values for the corresponding sections. So the ImageSize can be determined | |
| // by the RVA and the VirtualSize of the last section header in the | |
| // Section Table. | |
| // | |
| if ((++Index) == (UINTN)Hdr.Te->NumberOfSections) { | |
| ImageContext->ImageSize = (SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize + | |
| ImageContext->SectionAlignment - 1) & ~(ImageContext->SectionAlignment - 1); | |
| } | |
| SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER); | |
| } | |
| if (DebugDirectoryEntryFileOffset != 0) { | |
| for (Index = 0; Index < DebugDirectoryEntry->Size; Index += sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)) { | |
| // | |
| // Read next debug directory entry | |
| // | |
| Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY); | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| DebugDirectoryEntryFileOffset, | |
| &Size, | |
| &DebugEntry | |
| ); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) { | |
| ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index); | |
| return RETURN_SUCCESS; | |
| } | |
| } | |
| } | |
| } | |
| return RETURN_SUCCESS; | |
| } | |
| /** | |
| Converts an image address to the loaded address. | |
| @param ImageContext The context of the image being loaded. | |
| @param Address The address to be converted to the loaded address. | |
| @return The converted address or NULL if the address can not be converted. | |
| **/ | |
| VOID * | |
| PeCoffLoaderImageAddress ( | |
| IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext, | |
| IN UINTN Address | |
| ) | |
| { | |
| // | |
| // @bug Check to make sure ImageSize is correct for the relocated image. | |
| // it may only work for the file we start with and not the relocated image | |
| // | |
| if (Address >= ImageContext->ImageSize) { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; | |
| return NULL; | |
| } | |
| return (CHAR8 *)((UINTN) ImageContext->ImageAddress + Address); | |
| } | |
| /** | |
| Applies relocation fixups to a PE/COFF image that was loaded with PeCoffLoaderLoadImage(). | |
| If the DestinationAddress field of ImageContext is 0, then use the ImageAddress field of | |
| ImageContext as the relocation base address. Otherwise, use the DestinationAddress field | |
| of ImageContext as the relocation base address. The caller must allocate the relocation | |
| fixup log buffer and fill in the FixupData field of ImageContext prior to calling this function. | |
| If ImageContext is NULL, then ASSERT(). | |
| @param ImageContext Pointer to the image context structure that describes the PE/COFF | |
| image that is being relocated. | |
| @retval RETURN_SUCCESS The PE/COFF image was relocated. | |
| Extended status information is in the ImageError field of ImageContext. | |
| @retval RETURN_LOAD_ERROR The image in not a valid PE/COFF image. | |
| Extended status information is in the ImageError field of ImageContext. | |
| @retval RETURN_UNSUPPORTED A relocation record type is not supported. | |
| Extended status information is in the ImageError field of ImageContext. | |
| **/ | |
| RETURN_STATUS | |
| EFIAPI | |
| PeCoffLoaderRelocateImage ( | |
| IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext | |
| ) | |
| { | |
| RETURN_STATUS Status; | |
| EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr; | |
| EFI_IMAGE_DATA_DIRECTORY *RelocDir; | |
| UINT64 Adjust; | |
| EFI_IMAGE_BASE_RELOCATION *RelocBase; | |
| EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd; | |
| UINT16 *Reloc; | |
| UINT16 *RelocEnd; | |
| CHAR8 *Fixup; | |
| CHAR8 *FixupBase; | |
| UINT16 *F16; | |
| UINT32 *F32; | |
| UINT64 *F64; | |
| CHAR8 *FixupData; | |
| PHYSICAL_ADDRESS BaseAddress; | |
| UINT32 NumberOfRvaAndSizes; | |
| UINT16 Magic; | |
| ASSERT (ImageContext != NULL); | |
| // | |
| // Assume success | |
| // | |
| ImageContext->ImageError = IMAGE_ERROR_SUCCESS; | |
| // | |
| // If there are no relocation entries, then we are done | |
| // | |
| if (ImageContext->RelocationsStripped) { | |
| return RETURN_SUCCESS; | |
| } | |
| // | |
| // If the destination address is not 0, use that rather than the | |
| // image address as the relocation target. | |
| // | |
| if (ImageContext->DestinationAddress != 0) { | |
| BaseAddress = ImageContext->DestinationAddress; | |
| } else if (!(ImageContext->IsTeImage)) { | |
| BaseAddress = ImageContext->ImageAddress; | |
| } else { | |
| Hdr.Te = (EFI_TE_IMAGE_HEADER *)(UINTN)(ImageContext->ImageAddress); | |
| BaseAddress = ImageContext->ImageAddress + sizeof (EFI_TE_IMAGE_HEADER) - Hdr.Te->StrippedSize; | |
| } | |
| if (!(ImageContext->IsTeImage)) { | |
| Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset); | |
| Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr); | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| Adjust = (UINT64)BaseAddress - Hdr.Pe32->OptionalHeader.ImageBase; | |
| Hdr.Pe32->OptionalHeader.ImageBase = (UINT32)BaseAddress; | |
| NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes; | |
| RelocDir = &Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| Adjust = (UINT64) BaseAddress - Hdr.Pe32Plus->OptionalHeader.ImageBase; | |
| Hdr.Pe32Plus->OptionalHeader.ImageBase = (UINT64)BaseAddress; | |
| NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes; | |
| RelocDir = &Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; | |
| } | |
| // | |
| // Find the relocation block | |
| // Per the PE/COFF spec, you can't assume that a given data directory | |
| // is present in the image. You have to check the NumberOfRvaAndSizes in | |
| // the optional header to verify a desired directory entry is there. | |
| // | |
| if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) { | |
| RelocBase = PeCoffLoaderImageAddress (ImageContext, RelocDir->VirtualAddress); | |
| RelocBaseEnd = PeCoffLoaderImageAddress ( | |
| ImageContext, | |
| RelocDir->VirtualAddress + RelocDir->Size - 1 | |
| ); | |
| } else { | |
| // | |
| // Set base and end to bypass processing below. | |
| // | |
| RelocBase = RelocBaseEnd = 0; | |
| } | |
| } else { | |
| Hdr.Te = (EFI_TE_IMAGE_HEADER *)(UINTN)(ImageContext->ImageAddress); | |
| Adjust = (UINT64) (BaseAddress - Hdr.Te->ImageBase); | |
| Hdr.Te->ImageBase = (UINT64) (BaseAddress); | |
| // | |
| // Find the relocation block | |
| // | |
| RelocDir = &Hdr.Te->DataDirectory[0]; | |
| RelocBase = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)( | |
| ImageContext->ImageAddress + | |
| RelocDir->VirtualAddress + | |
| sizeof(EFI_TE_IMAGE_HEADER) - | |
| Hdr.Te->StrippedSize | |
| ); | |
| RelocBaseEnd = (EFI_IMAGE_BASE_RELOCATION *) ((UINTN) RelocBase + (UINTN) RelocDir->Size - 1); | |
| } | |
| // | |
| // Run the relocation information and apply the fixups | |
| // | |
| FixupData = ImageContext->FixupData; | |
| while (RelocBase < RelocBaseEnd) { | |
| Reloc = (UINT16 *) ((CHAR8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION)); | |
| RelocEnd = (UINT16 *) ((CHAR8 *) RelocBase + RelocBase->SizeOfBlock); | |
| if (!(ImageContext->IsTeImage)) { | |
| FixupBase = PeCoffLoaderImageAddress (ImageContext, RelocBase->VirtualAddress); | |
| } else { | |
| FixupBase = (CHAR8 *)(UINTN)(ImageContext->ImageAddress + | |
| RelocBase->VirtualAddress + | |
| sizeof(EFI_TE_IMAGE_HEADER) - | |
| Hdr.Te->StrippedSize | |
| ); | |
| } | |
| if ((CHAR8 *) RelocEnd < (CHAR8 *) ((UINTN) ImageContext->ImageAddress) || | |
| (CHAR8 *) RelocEnd > (CHAR8 *)((UINTN)ImageContext->ImageAddress + | |
| (UINTN)ImageContext->ImageSize)) { | |
| ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| // | |
| // Run this relocation record | |
| // | |
| while (Reloc < RelocEnd) { | |
| Fixup = FixupBase + (*Reloc & 0xFFF); | |
| switch ((*Reloc) >> 12) { | |
| case EFI_IMAGE_REL_BASED_ABSOLUTE: | |
| break; | |
| case EFI_IMAGE_REL_BASED_HIGH: | |
| F16 = (UINT16 *) Fixup; | |
| *F16 = (UINT16) (*F16 + ((UINT16) ((UINT32) Adjust >> 16))); | |
| if (FixupData != NULL) { | |
| *(UINT16 *) FixupData = *F16; | |
| FixupData = FixupData + sizeof (UINT16); | |
| } | |
| break; | |
| case EFI_IMAGE_REL_BASED_LOW: | |
| F16 = (UINT16 *) Fixup; | |
| *F16 = (UINT16) (*F16 + (UINT16) Adjust); | |
| if (FixupData != NULL) { | |
| *(UINT16 *) FixupData = *F16; | |
| FixupData = FixupData + sizeof (UINT16); | |
| } | |
| break; | |
| case EFI_IMAGE_REL_BASED_HIGHLOW: | |
| F32 = (UINT32 *) Fixup; | |
| *F32 = *F32 + (UINT32) Adjust; | |
| if (FixupData != NULL) { | |
| FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32)); | |
| *(UINT32 *)FixupData = *F32; | |
| FixupData = FixupData + sizeof (UINT32); | |
| } | |
| break; | |
| case EFI_IMAGE_REL_BASED_DIR64: | |
| F64 = (UINT64 *) Fixup; | |
| *F64 = *F64 + (UINT64) Adjust; | |
| if (FixupData != NULL) { | |
| FixupData = ALIGN_POINTER (FixupData, sizeof(UINT64)); | |
| *(UINT64 *)(FixupData) = *F64; | |
| FixupData = FixupData + sizeof(UINT64); | |
| } | |
| break; | |
| default: | |
| // | |
| // The common code does not handle some of the stranger IPF relocations | |
| // PeCoffLoaderRelocateImageEx () addes support for these complex fixups | |
| // on IPF and is a No-Op on other archtiectures. | |
| // | |
| Status = PeCoffLoaderRelocateImageEx (Reloc, Fixup, &FixupData, Adjust); | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION; | |
| return Status; | |
| } | |
| } | |
| // | |
| // Next relocation record | |
| // | |
| Reloc += 1; | |
| } | |
| // | |
| // Next reloc block | |
| // | |
| RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd; | |
| } | |
| return RETURN_SUCCESS; | |
| } | |
| /** | |
| Loads a PE/COFF image into memory. | |
| Loads the PE/COFF image accessed through the ImageRead service of ImageContext into the buffer | |
| specified by the ImageAddress and ImageSize fields of ImageContext. The caller must allocate | |
| the load buffer and fill in the ImageAddress and ImageSize fields prior to calling this function. | |
| The EntryPoint, FixupDataSize, CodeView, and PdbPointer fields of ImageContext are computed. | |
| If ImageContext is NULL, then ASSERT(). | |
| @param ImageContext Pointer to the image context structure that describes the PE/COFF | |
| image that is being loaded. | |
| @retval RETURN_SUCCESS The PE/COFF image was loaded into the buffer specified by | |
| the ImageAddress and ImageSize fields of ImageContext. | |
| Extended status information is in the ImageError field of ImageContext. | |
| @retval RETURN_BUFFER_TOO_SMALL The caller did not provide a large enough buffer. | |
| Extended status information is in the ImageError field of ImageContext. | |
| @retval RETURN_LOAD_ERROR The PE/COFF image is an EFI Runtime image with no relocations. | |
| Extended status information is in the ImageError field of ImageContext. | |
| @retval RETURN_INVALID_PARAMETER The image address is invalid. | |
| Extended status information is in the ImageError field of ImageContext. | |
| **/ | |
| RETURN_STATUS | |
| EFIAPI | |
| PeCoffLoaderLoadImage ( | |
| IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext | |
| ) | |
| { | |
| RETURN_STATUS Status; | |
| EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr; | |
| PE_COFF_LOADER_IMAGE_CONTEXT CheckContext; | |
| EFI_IMAGE_SECTION_HEADER *FirstSection; | |
| EFI_IMAGE_SECTION_HEADER *Section; | |
| UINTN NumberOfSections; | |
| UINTN Index; | |
| CHAR8 *Base; | |
| CHAR8 *End; | |
| CHAR8 *MaxEnd; | |
| EFI_IMAGE_DATA_DIRECTORY *DirectoryEntry; | |
| EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *DebugEntry; | |
| UINTN Size; | |
| UINT32 TempDebugEntryRva; | |
| UINT32 NumberOfRvaAndSizes; | |
| UINT16 Magic; | |
| ASSERT (ImageContext != NULL); | |
| // | |
| // Assume success | |
| // | |
| ImageContext->ImageError = IMAGE_ERROR_SUCCESS; | |
| // | |
| // Copy the provided context info into our local version, get what we | |
| // can from the original image, and then use that to make sure everything | |
| // is legit. | |
| // | |
| CopyMem (&CheckContext, ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT)); | |
| Status = PeCoffLoaderGetImageInfo (&CheckContext); | |
| if (RETURN_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Make sure there is enough allocated space for the image being loaded | |
| // | |
| if (ImageContext->ImageSize < CheckContext.ImageSize) { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_SIZE; | |
| return RETURN_BUFFER_TOO_SMALL; | |
| } | |
| if (ImageContext->ImageAddress == 0) { | |
| // | |
| // Image cannot be loaded into 0 address. | |
| // | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; | |
| return RETURN_INVALID_PARAMETER; | |
| } | |
| // | |
| // If there's no relocations, then make sure it's not a runtime driver, | |
| // and that it's being loaded at the linked address. | |
| // | |
| if (CheckContext.RelocationsStripped) { | |
| // | |
| // If the image does not contain relocations and it is a runtime driver | |
| // then return an error. | |
| // | |
| if (CheckContext.ImageType == EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER) { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_SUBSYSTEM; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| // | |
| // If the image does not contain relocations, and the requested load address | |
| // is not the linked address, then return an error. | |
| // | |
| if (CheckContext.ImageAddress != ImageContext->ImageAddress) { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; | |
| return RETURN_INVALID_PARAMETER; | |
| } | |
| } | |
| // | |
| // Make sure the allocated space has the proper section alignment | |
| // | |
| if (!(ImageContext->IsTeImage)) { | |
| if ((ImageContext->ImageAddress & (CheckContext.SectionAlignment - 1)) != 0) { | |
| ImageContext->ImageError = IMAGE_ERROR_INVALID_SECTION_ALIGNMENT; | |
| return RETURN_INVALID_PARAMETER; | |
| } | |
| } | |
| // | |
| // Read the entire PE/COFF or TE header into memory | |
| // | |
| if (!(ImageContext->IsTeImage)) { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| 0, | |
| &ImageContext->SizeOfHeaders, | |
| (VOID *) (UINTN) ImageContext->ImageAddress | |
| ); | |
| Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset); | |
| FirstSection = (EFI_IMAGE_SECTION_HEADER *) ( | |
| (UINTN)ImageContext->ImageAddress + | |
| ImageContext->PeCoffHeaderOffset + | |
| sizeof(UINT32) + | |
| sizeof(EFI_IMAGE_FILE_HEADER) + | |
| Hdr.Pe32->FileHeader.SizeOfOptionalHeader | |
| ); | |
| NumberOfSections = (UINTN) (Hdr.Pe32->FileHeader.NumberOfSections); | |
| } else { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| 0, | |
| &ImageContext->SizeOfHeaders, | |
| (void *)(UINTN)ImageContext->ImageAddress | |
| ); | |
| Hdr.Te = (EFI_TE_IMAGE_HEADER *)(UINTN)(ImageContext->ImageAddress); | |
| FirstSection = (EFI_IMAGE_SECTION_HEADER *) ( | |
| (UINTN)ImageContext->ImageAddress + | |
| sizeof(EFI_TE_IMAGE_HEADER) | |
| ); | |
| NumberOfSections = (UINTN) (Hdr.Te->NumberOfSections); | |
| } | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| // | |
| // Load each section of the image | |
| // | |
| Section = FirstSection; | |
| for (Index = 0, MaxEnd = NULL; Index < NumberOfSections; Index++) { | |
| // | |
| // Compute sections address | |
| // | |
| Base = PeCoffLoaderImageAddress (ImageContext, Section->VirtualAddress); | |
| End = PeCoffLoaderImageAddress ( | |
| ImageContext, | |
| Section->VirtualAddress + Section->Misc.VirtualSize - 1 | |
| ); | |
| if (ImageContext->IsTeImage) { | |
| Base = (CHAR8 *)((UINTN) Base + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize); | |
| End = (CHAR8 *)((UINTN) End + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize); | |
| } | |
| if (End > MaxEnd) { | |
| MaxEnd = End; | |
| } | |
| // | |
| // If the base start or end address resolved to 0, then fail. | |
| // | |
| if ((Base == NULL) || (End == NULL)) { | |
| ImageContext->ImageError = IMAGE_ERROR_SECTION_NOT_LOADED; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| // | |
| // Read the section | |
| // | |
| Size = (UINTN) Section->Misc.VirtualSize; | |
| if ((Size == 0) || (Size > Section->SizeOfRawData)) { | |
| Size = (UINTN) Section->SizeOfRawData; | |
| } | |
| if (Section->SizeOfRawData) { | |
| if (!(ImageContext->IsTeImage)) { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| Section->PointerToRawData, | |
| &Size, | |
| Base | |
| ); | |
| } else { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| Section->PointerToRawData + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN)Hdr.Te->StrippedSize, | |
| &Size, | |
| Base | |
| ); | |
| } | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return Status; | |
| } | |
| } | |
| // | |
| // If raw size is less then virt size, zero fill the remaining | |
| // | |
| if (Size < Section->Misc.VirtualSize) { | |
| ZeroMem (Base + Size, Section->Misc.VirtualSize - Size); | |
| } | |
| // | |
| // Next Section | |
| // | |
| Section += 1; | |
| } | |
| // | |
| // Get image's entry point | |
| // | |
| Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr); | |
| if (!(ImageContext->IsTeImage)) { | |
| // | |
| // Sizes of AddressOfEntryPoint are different so we need to do this safely | |
| // | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| ImageContext->EntryPoint = (PHYSICAL_ADDRESS)(UINTN)PeCoffLoaderImageAddress ( | |
| ImageContext, | |
| (UINTN)Hdr.Pe32->OptionalHeader.AddressOfEntryPoint | |
| ); | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| ImageContext->EntryPoint = (PHYSICAL_ADDRESS)(UINTN)PeCoffLoaderImageAddress ( | |
| ImageContext, | |
| (UINTN)Hdr.Pe32Plus->OptionalHeader.AddressOfEntryPoint | |
| ); | |
| } | |
| } else { | |
| ImageContext->EntryPoint = (PHYSICAL_ADDRESS) ( | |
| (UINTN)ImageContext->ImageAddress + | |
| (UINTN)Hdr.Te->AddressOfEntryPoint + | |
| (UINTN)sizeof(EFI_TE_IMAGE_HEADER) - | |
| (UINTN)Hdr.Te->StrippedSize | |
| ); | |
| } | |
| // | |
| // Determine the size of the fixup data | |
| // | |
| // Per the PE/COFF spec, you can't assume that a given data directory | |
| // is present in the image. You have to check the NumberOfRvaAndSizes in | |
| // the optional header to verify a desired directory entry is there. | |
| // | |
| if (!(ImageContext->IsTeImage)) { | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes; | |
| DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes; | |
| DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *)&Hdr.Pe32Plus->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; | |
| } | |
| if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) { | |
| ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN); | |
| } else { | |
| ImageContext->FixupDataSize = 0; | |
| } | |
| } else { | |
| DirectoryEntry = &Hdr.Te->DataDirectory[0]; | |
| ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN); | |
| } | |
| // | |
| // Consumer must allocate a buffer for the relocation fixup log. | |
| // Only used for runtime drivers. | |
| // | |
| ImageContext->FixupData = NULL; | |
| // | |
| // Load the Codeview info if present | |
| // | |
| if (ImageContext->DebugDirectoryEntryRva != 0) { | |
| if (!(ImageContext->IsTeImage)) { | |
| DebugEntry = PeCoffLoaderImageAddress ( | |
| ImageContext, | |
| ImageContext->DebugDirectoryEntryRva | |
| ); | |
| } else { | |
| DebugEntry = (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *)(UINTN)( | |
| ImageContext->ImageAddress + | |
| ImageContext->DebugDirectoryEntryRva + | |
| sizeof(EFI_TE_IMAGE_HEADER) - | |
| Hdr.Te->StrippedSize | |
| ); | |
| } | |
| if (DebugEntry != NULL) { | |
| TempDebugEntryRva = DebugEntry->RVA; | |
| if (DebugEntry->RVA == 0 && DebugEntry->FileOffset != 0) { | |
| Section--; | |
| if ((UINTN)Section->SizeOfRawData < Section->Misc.VirtualSize) { | |
| TempDebugEntryRva = Section->VirtualAddress + Section->Misc.VirtualSize; | |
| } else { | |
| TempDebugEntryRva = Section->VirtualAddress + Section->SizeOfRawData; | |
| } | |
| } | |
| if (TempDebugEntryRva != 0) { | |
| if (!(ImageContext->IsTeImage)) { | |
| ImageContext->CodeView = PeCoffLoaderImageAddress (ImageContext, TempDebugEntryRva); | |
| } else { | |
| ImageContext->CodeView = (VOID *)( | |
| (UINTN)ImageContext->ImageAddress + | |
| (UINTN)TempDebugEntryRva + | |
| (UINTN)sizeof (EFI_TE_IMAGE_HEADER) - | |
| (UINTN) Hdr.Te->StrippedSize | |
| ); | |
| } | |
| if (ImageContext->CodeView == NULL) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| if (DebugEntry->RVA == 0) { | |
| Size = DebugEntry->SizeOfData; | |
| if (!(ImageContext->IsTeImage)) { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| DebugEntry->FileOffset, | |
| &Size, | |
| ImageContext->CodeView | |
| ); | |
| } else { | |
| Status = ImageContext->ImageRead ( | |
| ImageContext->Handle, | |
| DebugEntry->FileOffset + sizeof (EFI_TE_IMAGE_HEADER) - Hdr.Te->StrippedSize, | |
| &Size, | |
| ImageContext->CodeView | |
| ); | |
| // | |
| // Should we apply fix up to this field according to the size difference between PE and TE? | |
| // Because now we maintain TE header fields unfixed, this field will also remain as they are | |
| // in original PE image. | |
| // | |
| } | |
| if (RETURN_ERROR (Status)) { | |
| ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; | |
| return RETURN_LOAD_ERROR; | |
| } | |
| DebugEntry->RVA = TempDebugEntryRva; | |
| } | |
| switch (*(UINT32 *) ImageContext->CodeView) { | |
| case CODEVIEW_SIGNATURE_NB10: | |
| ImageContext->PdbPointer = (CHAR8 *)ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY); | |
| break; | |
| case CODEVIEW_SIGNATURE_RSDS: | |
| ImageContext->PdbPointer = (CHAR8 *)ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_RSDS_ENTRY); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Reapply fixups on a fixed up PE32/PE32+ image to allow virutal calling at EFI | |
| runtime. | |
| PE_COFF_LOADER_IMAGE_CONTEXT.FixupData stores information needed to reapply | |
| the fixups with a virtual mapping. | |
| @param ImageBase Base address of relocated image | |
| @param VirtImageBase Virtual mapping for ImageBase | |
| @param ImageSize Size of the image to relocate | |
| @param RelocationData Location to place results of read | |
| **/ | |
| VOID | |
| EFIAPI | |
| PeCoffLoaderRelocateImageForRuntime ( | |
| IN PHYSICAL_ADDRESS ImageBase, | |
| IN PHYSICAL_ADDRESS VirtImageBase, | |
| IN UINTN ImageSize, | |
| IN VOID *RelocationData | |
| ) | |
| { | |
| CHAR8 *OldBase; | |
| CHAR8 *NewBase; | |
| EFI_IMAGE_DOS_HEADER *DosHdr; | |
| EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr; | |
| UINT32 NumberOfRvaAndSizes; | |
| EFI_IMAGE_DATA_DIRECTORY *DataDirectory; | |
| EFI_IMAGE_DATA_DIRECTORY *RelocDir; | |
| EFI_IMAGE_BASE_RELOCATION *RelocBase; | |
| EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd; | |
| UINT16 *Reloc; | |
| UINT16 *RelocEnd; | |
| CHAR8 *Fixup; | |
| CHAR8 *FixupBase; | |
| UINT16 *F16; | |
| UINT32 *F32; | |
| UINT64 *F64; | |
| CHAR8 *FixupData; | |
| UINTN Adjust; | |
| RETURN_STATUS Status; | |
| UINT16 Magic; | |
| OldBase = (CHAR8 *)((UINTN)ImageBase); | |
| NewBase = (CHAR8 *)((UINTN)VirtImageBase); | |
| Adjust = (UINTN) NewBase - (UINTN) OldBase; | |
| // | |
| // Find the image's relocate dir info | |
| // | |
| DosHdr = (EFI_IMAGE_DOS_HEADER *)OldBase; | |
| if (DosHdr->e_magic == EFI_IMAGE_DOS_SIGNATURE) { | |
| // | |
| // Valid DOS header so get address of PE header | |
| // | |
| Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)(((CHAR8 *)DosHdr) + DosHdr->e_lfanew); | |
| } else { | |
| // | |
| // No Dos header so assume image starts with PE header. | |
| // | |
| Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)OldBase; | |
| } | |
| if (Hdr.Pe32->Signature != EFI_IMAGE_NT_SIGNATURE) { | |
| // | |
| // Not a valid PE image so Exit | |
| // | |
| return ; | |
| } | |
| Magic = PeCoffLoaderGetPeHeaderMagicValue (Hdr); | |
| if (Magic == EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC) { | |
| // | |
| // Use PE32 offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32->OptionalHeader.NumberOfRvaAndSizes; | |
| DataDirectory = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32->OptionalHeader.DataDirectory[0]); | |
| } else { | |
| // | |
| // Use PE32+ offset | |
| // | |
| NumberOfRvaAndSizes = Hdr.Pe32Plus->OptionalHeader.NumberOfRvaAndSizes; | |
| DataDirectory = (EFI_IMAGE_DATA_DIRECTORY *)&(Hdr.Pe32Plus->OptionalHeader.DataDirectory[0]); | |
| } | |
| // | |
| // Find the relocation block | |
| // | |
| // Per the PE/COFF spec, you can't assume that a given data directory | |
| // is present in the image. You have to check the NumberOfRvaAndSizes in | |
| // the optional header to verify a desired directory entry is there. | |
| // | |
| if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) { | |
| RelocDir = DataDirectory + EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC; | |
| RelocBase = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)(ImageBase + RelocDir->VirtualAddress); | |
| RelocBaseEnd = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)(ImageBase + RelocDir->VirtualAddress + RelocDir->Size); | |
| } else { | |
| // | |
| // Cannot find relocations, cannot continue | |
| // | |
| ASSERT (FALSE); | |
| return ; | |
| } | |
| ASSERT (RelocBase != NULL && RelocBaseEnd != NULL); | |
| // | |
| // Run the whole relocation block. And re-fixup data that has not been | |
| // modified. The FixupData is used to see if the image has been modified | |
| // since it was relocated. This is so data sections that have been updated | |
| // by code will not be fixed up, since that would set them back to | |
| // defaults. | |
| // | |
| FixupData = RelocationData; | |
| while (RelocBase < RelocBaseEnd) { | |
| Reloc = (UINT16 *) ((UINT8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION)); | |
| RelocEnd = (UINT16 *) ((UINT8 *) RelocBase + RelocBase->SizeOfBlock); | |
| FixupBase = (CHAR8 *) ((UINTN)ImageBase) + RelocBase->VirtualAddress; | |
| // | |
| // Run this relocation record | |
| // | |
| while (Reloc < RelocEnd) { | |
| Fixup = FixupBase + (*Reloc & 0xFFF); | |
| switch ((*Reloc) >> 12) { | |
| case EFI_IMAGE_REL_BASED_ABSOLUTE: | |
| break; | |
| case EFI_IMAGE_REL_BASED_HIGH: | |
| F16 = (UINT16 *) Fixup; | |
| if (*(UINT16 *) FixupData == *F16) { | |
| *F16 = (UINT16) (*F16 + ((UINT16) ((UINT32) Adjust >> 16))); | |
| } | |
| FixupData = FixupData + sizeof (UINT16); | |
| break; | |
| case EFI_IMAGE_REL_BASED_LOW: | |
| F16 = (UINT16 *) Fixup; | |
| if (*(UINT16 *) FixupData == *F16) { | |
| *F16 = (UINT16) (*F16 + ((UINT16) Adjust & 0xffff)); | |
| } | |
| FixupData = FixupData + sizeof (UINT16); | |
| break; | |
| case EFI_IMAGE_REL_BASED_HIGHLOW: | |
| F32 = (UINT32 *) Fixup; | |
| FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32)); | |
| if (*(UINT32 *) FixupData == *F32) { | |
| *F32 = *F32 + (UINT32) Adjust; | |
| } | |
| FixupData = FixupData + sizeof (UINT32); | |
| break; | |
| case EFI_IMAGE_REL_BASED_DIR64: | |
| F64 = (UINT64 *)Fixup; | |
| FixupData = ALIGN_POINTER (FixupData, sizeof (UINT64)); | |
| if (*(UINT64 *) FixupData == *F64) { | |
| *F64 = *F64 + (UINT64)Adjust; | |
| } | |
| FixupData = FixupData + sizeof (UINT64); | |
| break; | |
| case EFI_IMAGE_REL_BASED_HIGHADJ: | |
| // | |
| // Not implemented, but not used in EFI 1.0 | |
| // | |
| ASSERT (FALSE); | |
| break; | |
| default: | |
| // | |
| // Only Itanium requires ConvertPeImage_Ex | |
| // | |
| Status = PeHotRelocateImageEx (Reloc, Fixup, &FixupData, Adjust); | |
| if (RETURN_ERROR (Status)) { | |
| return ; | |
| } | |
| } | |
| // | |
| // Next relocation record | |
| // | |
| Reloc += 1; | |
| } | |
| // | |
| // next reloc block | |
| // | |
| RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd; | |
| } | |
| } | |
| /** | |
| ImageRead function that operates on a memory buffer whos base is passed into | |
| FileHandle. | |
| @param FileHandle Ponter to baes of the input stream | |
| @param FileOffset Offset to the start of the buffer | |
| @param ReadSize Number of bytes to copy into the buffer | |
| @param Buffer Location to place results of read | |
| @retval RETURN_SUCCESS Data is read from FileOffset from the Handle into | |
| the buffer. | |
| **/ | |
| RETURN_STATUS | |
| EFIAPI | |
| PeCoffLoaderImageReadFromMemory ( | |
| IN VOID *FileHandle, | |
| IN UINTN FileOffset, | |
| IN OUT UINTN *ReadSize, | |
| OUT VOID *Buffer | |
| ) | |
| { | |
| CopyMem (Buffer, ((UINT8 *)FileHandle) + FileOffset, *ReadSize); | |
| return RETURN_SUCCESS; | |
| } | |