| /** @file | |
| This protocol abstracts the 8259 interrupt controller. This includes | |
| PCI IRQ routing need to program the PCI Interrupt Line register. | |
| Copyright (c) 2006, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: Legacy8259.h | |
| @par Revision Reference: | |
| This protocol is defined in Framework for EFI Compatibility Support Module spec | |
| Version 0.96 | |
| **/ | |
| #ifndef _EFI_LEGACY_8259_H | |
| #define _EFI_LEGACY_8259_H | |
| #define EFI_LEGACY_8259_PROTOCOL_GUID \ | |
| { \ | |
| 0x38321dba, 0x4fe0, 0x4e17, {0x8a, 0xec, 0x41, 0x30, 0x55, 0xea, 0xed, 0xc1 } \ | |
| } | |
| typedef struct _EFI_LEGACY_8259_PROTOCOL EFI_LEGACY_8259_PROTOCOL; | |
| typedef enum { | |
| Efi8259Irq0, | |
| Efi8259Irq1, | |
| Efi8259Irq2, | |
| Efi8259Irq3, | |
| Efi8259Irq4, | |
| Efi8259Irq5, | |
| Efi8259Irq6, | |
| Efi8259Irq7, | |
| Efi8259Irq8, | |
| Efi8259Irq9, | |
| Efi8259Irq10, | |
| Efi8259Irq11, | |
| Efi8259Irq12, | |
| Efi8259Irq13, | |
| Efi8259Irq14, | |
| Efi8259Irq15, | |
| Efi8259IrqMax | |
| } EFI_8259_IRQ; | |
| typedef enum { | |
| Efi8259LegacyMode, | |
| Efi8259ProtectedMode, | |
| Efi8259MaxMode | |
| } EFI_8259_MODE; | |
| /** | |
| Get the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for | |
| the legacy mode mask and the protected mode mask. The base address for the 8259 | |
| is different for legacy and protected mode, so two masks are required. | |
| @param This Protocol instance pointer. | |
| @param MasterBase The base vector for the Master PIC in the 8259 controller | |
| @param Slavebase The base vector for the Master PIC in the 8259 controller | |
| @retval EFI_SUCCESS The new bases were programmed | |
| @retval EFI_DEVICE_ERROR A device erro occured programming the vector bases | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_SET_VECTOR_BASE) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN UINT8 MasterBase, | |
| IN UINT8 SlaveBase | |
| ) | |
| ; | |
| /** | |
| Get the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for | |
| the legacy mode mask and the protected mode mask. The base address for the 8259 | |
| is different for legacy and protected mode, so two masks are required. | |
| @param This Protocol instance pointer. | |
| @param LegacyMask Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param LegacyEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param ProtectedMask Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param ProtectedEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @retval EFI_SUCCESS 8259 status returned | |
| @retval EFI_DEVICE_ERROR Error reading 8259 | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_GET_MASK) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| OUT UINT16 *LegacyMask, OPTIONAL | |
| OUT UINT16 *LegacyEdgeLevel, OPTIONAL | |
| OUT UINT16 *ProtectedMask, OPTIONAL | |
| OUT UINT16 *ProtectedEdgeLevel OPTIONAL | |
| ) | |
| ; | |
| /** | |
| Set the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for | |
| the legacy mode mask and the protected mode mask. The base address for the 8259 | |
| is different for legacy and protected mode, so two masks are required. | |
| Also set the edge/level masks. | |
| @param This Protocol instance pointer. | |
| @param LegacyMask Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param LegacyEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param ProtectedMask Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @param ProtectedEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15 | |
| @retval EFI_SUCCESS 8259 status returned | |
| @retval EFI_DEVICE_ERROR Error reading 8259 | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_SET_MASK) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN UINT16 *LegacyMask, OPTIONAL | |
| IN UINT16 *LegacyEdgeLevel, OPTIONAL | |
| IN UINT16 *ProtectedMask, OPTIONAL | |
| IN UINT16 *ProtectedEdgeLevel OPTIONAL | |
| ) | |
| ; | |
| /** | |
| Set the 8259 mode of operation. The base address for the 8259 is different for | |
| legacy and protected mode. The legacy mode requires the master 8259 to have a | |
| master base of 0x08 and the slave base of 0x70. The protected mode base locations | |
| are not defined. Interrupts must be masked by the caller before this function | |
| is called. The interrupt mask from the current mode is saved. The interrupt | |
| mask for the new mode is Mask, or if Mask does not exist the previously saved | |
| mask is used. | |
| @param This Protocol instance pointer. | |
| @param Mode Mode of operation. i.e. real mode or protected mode | |
| @param Mask Optional interupt mask for the new mode. | |
| @param EdgeLevel Optional trigger mask for the new mode. | |
| @retval EFI_SUCCESS 8259 programmed | |
| @retval EFI_DEVICE_ERROR Error writting to 8259 | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_SET_MODE) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_8259_MODE Mode, | |
| IN UINT16 *Mask, OPTIONAL | |
| IN UINT16 *EdgeLevel OPTIONAL | |
| ) | |
| ; | |
| /** | |
| Convert from IRQ to processor interrupt vector number. | |
| @param This Protocol instance pointer. | |
| @param Irq 8259 IRQ0 - IRQ15 | |
| @param Vector Processor vector number that matches Irq | |
| @retval EFI_SUCCESS The Vector matching Irq is returned | |
| @retval EFI_INVALID_PARAMETER Irq not valid | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_GET_VECTOR) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_8259_IRQ Irq, | |
| OUT UINT8 *Vector | |
| ) | |
| ; | |
| /** | |
| Enable Irq by unmasking interrupt in 8259 | |
| @param This Protocol instance pointer. | |
| @param Irq 8259 IRQ0 - IRQ15 | |
| @param LevelTriggered TRUE if level triggered. FALSE if edge triggered. | |
| @retval EFI_SUCCESS Irq enabled on 8259 | |
| @retval EFI_INVALID_PARAMETER Irq not valid | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_ENABLE_IRQ) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_8259_IRQ Irq, | |
| IN BOOLEAN LevelTriggered | |
| ) | |
| ; | |
| /** | |
| Disable Irq by masking interrupt in 8259 | |
| @param This Protocol instance pointer. | |
| @param Irq 8259 IRQ0 - IRQ15 | |
| @retval EFI_SUCCESS Irq disabled on 8259 | |
| @retval EFI_INVALID_PARAMETER Irq not valid | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_DISABLE_IRQ) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_8259_IRQ Irq | |
| ) | |
| ; | |
| /** | |
| PciHandle represents a PCI config space of a PCI function. Vector | |
| represents Interrupt Pin (from PCI config space) and it is the data | |
| that is programmed into the Interrupt Line (from the PCI config space) | |
| register. | |
| @param This Protocol instance pointer. | |
| @param PciHandle PCI function to return vector for | |
| @param Vector Vector for fucntion that matches | |
| @retval EFI_SUCCESS A valid Vector is returned | |
| @retval EFI_INVALID_PARAMETER PciHandle not valid | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_GET_INTERRUPT_LINE) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_HANDLE PciHandle, | |
| OUT UINT8 *Vector | |
| ) | |
| ; | |
| /** | |
| Send an EOI to 8259 | |
| @param This Protocol instance pointer. | |
| @param Irq 8259 IRQ0 - IRQ15 | |
| @retval EFI_SUCCESS EOI successfully sent to 8259 | |
| @retval EFI_INVALID_PARAMETER Irq not valid | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_LEGACY_8259_END_OF_INTERRUPT) ( | |
| IN EFI_LEGACY_8259_PROTOCOL *This, | |
| IN EFI_8259_IRQ Irq | |
| ) | |
| ; | |
| /** | |
| @par Protocol Description: | |
| Abstracts the 8259 and APIC hardware control between EFI usage and | |
| Compatibility16 usage. | |
| @param SetVectorBase | |
| Sets the vector bases for master and slave PICs. | |
| @param GetMask | |
| Gets IRQ and edge/level masks for 16-bit real mode and 32-bit protected mode. | |
| @param SetMask | |
| Sets the IRQ and edge\level masks for 16-bit real mode and 32-bit protected mode. | |
| @param SetMode | |
| Sets PIC mode to 16-bit real mode or 32-bit protected mode. | |
| @param GetVector | |
| Gets the base vector assigned to an IRQ. | |
| @param EnableIrq | |
| Enables an IRQ. | |
| @param DisableIrq | |
| Disables an IRQ. | |
| @param GetInterruptLine | |
| Gets an IRQ that is assigned to a PCI device. | |
| @param EndOfInterrupt | |
| Issues the end of interrupt command. | |
| **/ | |
| struct _EFI_LEGACY_8259_PROTOCOL { | |
| EFI_LEGACY_8259_SET_VECTOR_BASE SetVectorBase; | |
| EFI_LEGACY_8259_GET_MASK GetMask; | |
| EFI_LEGACY_8259_SET_MASK SetMask; | |
| EFI_LEGACY_8259_SET_MODE SetMode; | |
| EFI_LEGACY_8259_GET_VECTOR GetVector; | |
| EFI_LEGACY_8259_ENABLE_IRQ EnableIrq; | |
| EFI_LEGACY_8259_DISABLE_IRQ DisableIrq; | |
| EFI_LEGACY_8259_GET_INTERRUPT_LINE GetInterruptLine; | |
| EFI_LEGACY_8259_END_OF_INTERRUPT EndOfInterrupt; | |
| }; | |
| extern EFI_GUID gEfiLegacy8259ProtocolGuid; | |
| #endif |