OldMdePkg/Include/Protocol/DeviceIo.h

/** @file
  Device IO protocol as defined in the EFI 1.0 specification.

  Device IO is used to abstract hardware access to devices. It includes
  memory mapped IO, IO, PCI Config space, and DMA.

  Copyright (c) 2006, Intel Corporation                                                         
  All rights reserved. This program and the accompanying materials                          
  are licensed and made available under the terms and conditions of the BSD License         
  which accompanies this distribution.  The full text of the license may be found at        
  http://opensource.org/licenses/bsd-license.php                                            

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

  Module Name:  DeviceIo.h

**/

#ifndef __DEVICE_IO_H__
#define __DEVICE_IO_H__

#define EFI_DEVICE_IO_PROTOCOL_GUID \
  { \
    0xaf6ac311, 0x84c3, 0x11d2, {0x8e, 0x3c, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
  }

typedef struct _EFI_DEVICE_IO_PROTOCOL EFI_DEVICE_IO_PROTOCOL;

typedef enum {
  IO_UINT8,
  IO_UINT16,
  IO_UINT32,
  IO_UINT64,
  MMIO_COPY_UINT8,
  MMIO_COPY_UINT16,
  MMIO_COPY_UINT32,
  MMIO_COPY_UINT64
} EFI_IO_WIDTH;

/**                                                                 
  Enables a driver to access device registers in the appropriate memory or I/O space.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.
  @param  Width                 Signifies the width of the I/O operations.                                                                   
  @param  Address               The base address of the I/O operations. 
  @param  Count                 The number of I/O operations to perform.
  @param  Buffer                For read operations, the destination buffer to store the results. For write
                                operations, the source buffer to write data from.                

  @retval EFI_SUCCESS           The data was read from or written to the device.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      
  @retval EFI_INVALID_PARAMETER Width is invalid.
                                   
**/
typedef
EFI_STATUS
(EFIAPI *EFI_DEVICE_IO) (
  IN EFI_DEVICE_IO_PROTOCOL         *This,
  IN EFI_IO_WIDTH                   Width,
  IN UINT64                         Address,
  IN UINTN                          Count,
  IN OUT VOID                       *Buffer
  );

typedef struct {
  EFI_DEVICE_IO Read;
  EFI_DEVICE_IO Write;
} EFI_IO_ACCESS;

/**                                                                 
  Provides an EFI Device Path for a PCI device with the given PCI configuration space address.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.
  @param  PciAddress            The PCI configuration space address of the device whose Device Path
                                is going to be returned.  
  @param  PciDevicePath         A pointer to the pointer for the EFI Device Path for PciAddress.
                                Memory for the Device Path is allocated from the pool.          

  @retval EFI_SUCCESS           The PciDevicePath returns a pointer to a valid EFI Device Path.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      
  @retval EFI_UNSUPPORTED       The PciAddress does not map to a valid EFI Device Path.
                                   
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PCI_DEVICE_PATH) (
  IN EFI_DEVICE_IO_PROTOCOL           *This,
  IN UINT64                           PciAddress,
  IN OUT EFI_DEVICE_PATH_PROTOCOL     **PciDevicePath
  );

typedef enum {
  EfiBusMasterRead,
  EfiBusMasterWrite,
  EfiBusMasterCommonBuffer
} EFI_IO_OPERATION_TYPE;

/**                                                                 
  Provides the device-specific addresses needed to access system memory.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.
  @param  Operation             Indicates if the bus master is going to read or write to system memory.
  @param  HostAddress           The system memory address to map to the device.
  @param  NumberOfBytes         On input the number of bytes to map.
  @param  DeviceAddress         The resulting map address for the bus master device to use to access the
                                hosts HostAddress.
  @param  Mapping               A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      
  @retval EFI_UNSUPPORTED       The HostAddress cannot be mapped as a common buffer.
  @retval EFI_INVALID_PARAMETER The Operation or HostAddress is undefined.
  @retval EFI_DEVICE_ERROR      The system hardware could not map the requested address.
                                   
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IO_MAP) (
  IN EFI_DEVICE_IO_PROTOCOL           *This,
  IN EFI_IO_OPERATION_TYPE            Operation,
  IN EFI_PHYSICAL_ADDRESS             *HostAddress,
  IN OUT UINTN                        *NumberOfBytes,
  OUT EFI_PHYSICAL_ADDRESS            *DeviceAddress,
  OUT VOID                            **Mapping
  );

/**                                                                 
  Completes the Map() operation and releases any corresponding resources.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.
  @param  Mapping               A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.
  @retval EFI_DEVICE_ERROR      The system hardware could not map the requested address.
                                   
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IO_UNMAP) (
  IN EFI_DEVICE_IO_PROTOCOL           *This,
  IN VOID                             *Mapping
  );

/**                                                                 
  Allocates pages that are suitable for an EFIBusMasterCommonBuffer mapping.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.
  @param  Type                  The type allocation to perform.
  @param  MemoryType            The type of memory to allocate, EfiBootServicesData or
                                EfiRuntimeServicesData.
  @param  Pages                 The number of pages to allocate.
  @param  HostAddress           A pointer to store the base address of the allocated range.                                

  @retval EFI_SUCCESS           The requested memory pages were allocated.
  @retval EFI_OUT_OF_RESOURCES  The memory pages could not be allocated.
  @retval EFI_INVALID_PARAMETER The requested memory type is invalid.
  @retval EFI_UNSUPPORTED       The requested HostAddress is not supported on
                                this platform.                               
                                   
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IO_ALLOCATE_BUFFER) (
  IN EFI_DEVICE_IO_PROTOCOL           *This,
  IN EFI_ALLOCATE_TYPE                Type,
  IN EFI_MEMORY_TYPE                  MemoryType,
  IN UINTN                            Pages,
  IN OUT EFI_PHYSICAL_ADDRESS         *HostAddress
  );

/**                                                                 
  Flushes any posted write data to the device.
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.

  @retval EFI_SUCCESS           The buffers were flushed.
  @retval EFI_DEVICE_ERROR      The buffers were not flushed due to a hardware error.                                 
  
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IO_FLUSH) (
  IN EFI_DEVICE_IO_PROTOCOL  *This
  );

/**                                                                 
  Frees pages that were allocated with AllocateBuffer().
    
  @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.  
  @param  Pages                 The number of pages to free.
  @param  HostAddress           The base address of the range to free.

  @retval EFI_SUCCESS           The requested memory pages were allocated.
  @retval EFI_NOT_FOUND         The requested memory pages were not allocated with
                                AllocateBuffer().  
  @retval EFI_INVALID_PARAMETER HostAddress is not page aligned or Pages is invalid.
  
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IO_FREE_BUFFER) (
  IN EFI_DEVICE_IO_PROTOCOL           *This,
  IN UINTN                            Pages,
  IN EFI_PHYSICAL_ADDRESS             HostAddress
  );

struct _EFI_DEVICE_IO_PROTOCOL {
  EFI_IO_ACCESS           Mem;
  EFI_IO_ACCESS           Io;
  EFI_IO_ACCESS           Pci;
  EFI_IO_MAP              Map;
  EFI_PCI_DEVICE_PATH     PciDevicePath;
  EFI_IO_UNMAP            Unmap;
  EFI_IO_ALLOCATE_BUFFER  AllocateBuffer;
  EFI_IO_FLUSH            Flush;
  EFI_IO_FREE_BUFFER      FreeBuffer;
};

extern EFI_GUID gEfiDeviceIoProtocolGuid;

#endif