MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.c

/** @file

  SPI bus SMM driver

  Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/
#include <Base.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/MmServicesTableLib.h>
#include <Protocol/SpiSmmConfiguration.h>
#include <Protocol/SpiSmmHc.h>
#include <Protocol/SpiIo.h>
#include "SpiBus.h"

/**
  Entry point of the Spi Bus layer

  @param[in] ImageHandle  Image handle of this driver.
  @param[in] SystemTable  Pointer to standard EFI system table.

  @retval EFI_SUCCESS       Succeed.
  @retval EFI_DEVICE_ERROR  Fail to install EFI_SPI_HC_PROTOCOL protocol.
  @retval EFI_NOT_FOUND     fail to locate SpiHcProtocol or SpiIoConfigurationProtocol
  @retval EFI_OUT_OF_RESOURCES  Failed to allocate SpiIoChip
**/
EFI_STATUS
EFIAPI
SpiBusEntry (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  EFI_STATUS                      Status;
  SPI_IO_CHIP                     *SpiChip;
  EFI_SPI_HC_PROTOCOL             *SpiHc;
  EFI_SPI_CONFIGURATION_PROTOCOL  *SpiConfiguration;
  EFI_SPI_PERIPHERAL              *SpiPeripheral;
  EFI_SPI_BUS                     *Bus;

  DEBUG ((DEBUG_VERBOSE, "%a - ENTRY\n", __func__));

  // Only a single Spi HC protocol in SMM
  Status = gMmst->MmLocateProtocol (
                    &gEfiSpiSmmHcProtocolGuid,
                    NULL,
                    (VOID **)&SpiHc
                    );

  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_VERBOSE, "No SpiHcProtocol is found\n"));
    Status = EFI_NOT_FOUND;
    goto Exit;
  }

  // Locate the SPI Configuration Protocol
  Status = gMmst->MmLocateProtocol (
                    &gEfiSpiSmmConfigurationProtocolGuid,
                    NULL,
                    (VOID **)&SpiConfiguration
                    );

  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_VERBOSE, "No SpiConfigurationProtocol is found\n"));
    Status = EFI_NOT_FOUND;
    goto Exit;
  }

  // Only one SpiBus supported in SMM
  if (SpiConfiguration->BusCount != 1) {
    DEBUG ((DEBUG_VERBOSE, "Only one SPI Bus supported in SMM\n"));
    Status = EFI_UNSUPPORTED;
    goto Exit;
  }

  Bus = (EFI_SPI_BUS *)SpiConfiguration->Buslist[0];

  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_VERBOSE, "%a - Error getting SpiHc from Handle\n", __func__));
    goto Exit;
  }

  SpiPeripheral = (EFI_SPI_PERIPHERAL *)Bus->Peripherallist;
  if (SpiPeripheral != NULL) {
    do {
      DEBUG ((
        DEBUG_VERBOSE,
        "%a: Installing SPI IO protocol for %s, by %s, PN=%s\n",
        __func__,
        SpiPeripheral->FriendlyName,
        SpiPeripheral->SpiPart->Vendor,
        SpiPeripheral->SpiPart->PartNumber
        ));
      // Allocate the SPI IO Device
      SpiChip = AllocateZeroPool (sizeof (SPI_IO_CHIP));
      ASSERT (SpiChip != NULL);
      if (SpiChip != NULL) {
        // Fill in the SpiChip
        SpiChip->Signature                      = SPI_IO_SIGNATURE;
        SpiChip->SpiConfig                      = SpiConfiguration;
        SpiChip->SpiHc                          = SpiHc;
        SpiChip->SpiBus                         = Bus;
        SpiChip->Protocol.SpiPeripheral         = SpiPeripheral;
        SpiChip->Protocol.OriginalSpiPeripheral = SpiPeripheral;
        SpiChip->Protocol.FrameSizeSupportMask  = SpiHc->FrameSizeSupportMask;
        SpiChip->Protocol.MaximumTransferBytes  = SpiHc->MaximumTransferBytes;
        if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_ADDRESS) != 0) {
          SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_ADDRESS;
        }

        if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_OPCODE) != 0) {
          SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_OPCODE;
        }

        if ((SpiHc->Attributes & HC_SUPPORTS_8_BIT_DATA_BUS_WIDTH) != 0) {
          SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_8_BIT_DATA_BUS_WIDTH;
        }

        if ((SpiHc->Attributes & HC_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != 0) {
          SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH;
        }

        if ((SpiHc->Attributes & HC_SUPPORTS_2_BIT_DATA_BUS_WIDTH) != 0) {
          SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_2_BIT_DATA_BUS_WIDTH;
        }

        SpiChip->Protocol.Transaction         = Transaction;
        SpiChip->Protocol.UpdateSpiPeripheral = UpdateSpiPeripheral;
        // Install the SPI IO Protocol
        Status = gMmst->MmInstallProtocolInterface (
                          &SpiChip->Handle,
                          (GUID *)SpiPeripheral->SpiPeripheralDriverGuid,
                          EFI_NATIVE_INTERFACE,
                          &SpiChip->Protocol
                          );
        if (EFI_ERROR (Status)) {
          DEBUG ((DEBUG_VERBOSE, "%a - Error installing SpiIoProtocol\n", __func__));
          continue;
        }
      } else {
        Status = EFI_OUT_OF_RESOURCES;
        DEBUG ((
          DEBUG_ERROR,
          "%a: Out of Memory resources\n",
          __func__
          ));
        break;
      }

      SpiPeripheral = (EFI_SPI_PERIPHERAL *)SpiPeripheral->NextSpiPeripheral;
    } while (SpiPeripheral != NULL);
  } else {
    Status = EFI_DEVICE_ERROR;
  }

Exit:
  DEBUG ((DEBUG_VERBOSE, "%a - EXIT (Status = %r)\n", __func__, Status));
  return Status;
}