| /** @file | |
| This module produce main entry for BDS phase - BdsEntry. | |
| When this module was dispatched by DxeCore, gEfiBdsArchProtocolGuid will be installed | |
| which contains interface of BdsEntry. | |
| After DxeCore finish DXE phase, gEfiBdsArchProtocolGuid->BdsEntry will be invoked | |
| to enter BDS phase. | |
| Copyright (c) 2004 - 2019, Intel Corporation. All rights reserved.<BR> | |
| (C) Copyright 2016-2019 Hewlett Packard Enterprise Development LP<BR> | |
| (C) Copyright 2015 Hewlett-Packard Development Company, L.P.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #include "Bds.h" | |
| #include "Language.h" | |
| #include "HwErrRecSupport.h" | |
| #include <Library/VariablePolicyHelperLib.h> | |
| #define SET_BOOT_OPTION_SUPPORT_KEY_COUNT(a, c) { \ | |
| (a) = ((a) & ~EFI_BOOT_OPTION_SUPPORT_COUNT) | (((c) << LowBitSet32 (EFI_BOOT_OPTION_SUPPORT_COUNT)) & EFI_BOOT_OPTION_SUPPORT_COUNT); \ | |
| } | |
| /// | |
| /// BDS arch protocol instance initial value. | |
| /// | |
| EFI_BDS_ARCH_PROTOCOL gBds = { | |
| BdsEntry | |
| }; | |
| // | |
| // gConnectConInEvent - Event which is signaled when ConIn connection is required | |
| // | |
| EFI_EVENT gConnectConInEvent = NULL; | |
| /// | |
| /// The read-only variables defined in UEFI Spec. | |
| /// | |
| CHAR16 *mReadOnlyVariables[] = { | |
| EFI_PLATFORM_LANG_CODES_VARIABLE_NAME, | |
| EFI_LANG_CODES_VARIABLE_NAME, | |
| EFI_BOOT_OPTION_SUPPORT_VARIABLE_NAME, | |
| EFI_HW_ERR_REC_SUPPORT_VARIABLE_NAME, | |
| EFI_OS_INDICATIONS_SUPPORT_VARIABLE_NAME | |
| }; | |
| CHAR16 *mBdsLoadOptionName[] = { | |
| L"Driver", | |
| L"SysPrep", | |
| L"Boot", | |
| L"PlatformRecovery" | |
| }; | |
| /** | |
| Event to Connect ConIn. | |
| @param Event Event whose notification function is being invoked. | |
| @param Context Pointer to the notification function's context, | |
| which is implementation-dependent. | |
| **/ | |
| VOID | |
| EFIAPI | |
| BdsDxeOnConnectConInCallBack ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // When Osloader call ReadKeyStroke to signal this event | |
| // no driver dependency is assumed existing. So use a non-dispatch version | |
| // | |
| Status = EfiBootManagerConnectConsoleVariable (ConIn); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Should not enter this case, if enter, the keyboard will not work. | |
| // May need platfrom policy to connect keyboard. | |
| // | |
| DEBUG ((DEBUG_WARN, "[Bds] Connect ConIn failed - %r!!!\n", Status)); | |
| } | |
| } | |
| /** | |
| Notify function for event group EFI_EVENT_GROUP_READY_TO_BOOT. This is used to | |
| check whether there is remaining deferred load images. | |
| @param[in] Event The Event that is being processed. | |
| @param[in] Context The Event Context. | |
| **/ | |
| VOID | |
| EFIAPI | |
| CheckDeferredLoadImageOnReadyToBoot ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_DEFERRED_IMAGE_LOAD_PROTOCOL *DeferredImage; | |
| UINTN HandleCount; | |
| EFI_HANDLE *Handles; | |
| UINTN Index; | |
| UINTN ImageIndex; | |
| EFI_DEVICE_PATH_PROTOCOL *ImageDevicePath; | |
| VOID *Image; | |
| UINTN ImageSize; | |
| BOOLEAN BootOption; | |
| CHAR16 *DevicePathStr; | |
| // | |
| // Find all the deferred image load protocols. | |
| // | |
| HandleCount = 0; | |
| Handles = NULL; | |
| Status = gBS->LocateHandleBuffer ( | |
| ByProtocol, | |
| &gEfiDeferredImageLoadProtocolGuid, | |
| NULL, | |
| &HandleCount, | |
| &Handles | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return; | |
| } | |
| for (Index = 0; Index < HandleCount; Index++) { | |
| Status = gBS->HandleProtocol (Handles[Index], &gEfiDeferredImageLoadProtocolGuid, (VOID **)&DeferredImage); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| for (ImageIndex = 0; ; ImageIndex++) { | |
| // | |
| // Load all the deferred images in this protocol instance. | |
| // | |
| Status = DeferredImage->GetImageInfo ( | |
| DeferredImage, | |
| ImageIndex, | |
| &ImageDevicePath, | |
| (VOID **)&Image, | |
| &ImageSize, | |
| &BootOption | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| break; | |
| } | |
| DevicePathStr = ConvertDevicePathToText (ImageDevicePath, FALSE, FALSE); | |
| DEBUG ((DEBUG_LOAD, "[Bds] Image was deferred but not loaded: %s.\n", DevicePathStr)); | |
| if (DevicePathStr != NULL) { | |
| FreePool (DevicePathStr); | |
| } | |
| } | |
| } | |
| if (Handles != NULL) { | |
| FreePool (Handles); | |
| } | |
| } | |
| /** | |
| Install Boot Device Selection Protocol | |
| @param ImageHandle The image handle. | |
| @param SystemTable The system table. | |
| @retval EFI_SUCEESS BDS has finished initializing. | |
| Return the dispatcher and recall BDS.Entry | |
| @retval Other Return status from AllocatePool() or gBS->InstallProtocolInterface | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| BdsInitialize ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_HANDLE Handle; | |
| // | |
| // Install protocol interface | |
| // | |
| Handle = NULL; | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &Handle, | |
| &gEfiBdsArchProtocolGuid, | |
| &gBds, | |
| NULL | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| DEBUG_CODE ( | |
| EFI_EVENT Event; | |
| // | |
| // Register notify function to check deferred images on ReadyToBoot Event. | |
| // | |
| Status = gBS->CreateEventEx ( | |
| EVT_NOTIFY_SIGNAL, | |
| TPL_CALLBACK, | |
| CheckDeferredLoadImageOnReadyToBoot, | |
| NULL, | |
| &gEfiEventReadyToBootGuid, | |
| &Event | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| ); | |
| return Status; | |
| } | |
| /** | |
| Function waits for a given event to fire, or for an optional timeout to expire. | |
| @param Event The event to wait for | |
| @param Timeout An optional timeout value in 100 ns units. | |
| @retval EFI_SUCCESS Event fired before Timeout expired. | |
| @retval EFI_TIME_OUT Timout expired before Event fired.. | |
| **/ | |
| EFI_STATUS | |
| BdsWaitForSingleEvent ( | |
| IN EFI_EVENT Event, | |
| IN UINT64 Timeout OPTIONAL | |
| ) | |
| { | |
| UINTN Index; | |
| EFI_STATUS Status; | |
| EFI_EVENT TimerEvent; | |
| EFI_EVENT WaitList[2]; | |
| if (Timeout != 0) { | |
| // | |
| // Create a timer event | |
| // | |
| Status = gBS->CreateEvent (EVT_TIMER, 0, NULL, NULL, &TimerEvent); | |
| if (!EFI_ERROR (Status)) { | |
| // | |
| // Set the timer event | |
| // | |
| gBS->SetTimer ( | |
| TimerEvent, | |
| TimerRelative, | |
| Timeout | |
| ); | |
| // | |
| // Wait for the original event or the timer | |
| // | |
| WaitList[0] = Event; | |
| WaitList[1] = TimerEvent; | |
| Status = gBS->WaitForEvent (2, WaitList, &Index); | |
| ASSERT_EFI_ERROR (Status); | |
| gBS->CloseEvent (TimerEvent); | |
| // | |
| // If the timer expired, change the return to timed out | |
| // | |
| if (Index == 1) { | |
| Status = EFI_TIMEOUT; | |
| } | |
| } | |
| } else { | |
| // | |
| // No timeout... just wait on the event | |
| // | |
| Status = gBS->WaitForEvent (1, &Event, &Index); | |
| ASSERT (!EFI_ERROR (Status)); | |
| ASSERT (Index == 0); | |
| } | |
| return Status; | |
| } | |
| /** | |
| The function reads user inputs. | |
| **/ | |
| VOID | |
| BdsReadKeys ( | |
| VOID | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_INPUT_KEY Key; | |
| if (PcdGetBool (PcdConInConnectOnDemand)) { | |
| return; | |
| } | |
| while (gST->ConIn != NULL) { | |
| Status = gST->ConIn->ReadKeyStroke (gST->ConIn, &Key); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // No more keys. | |
| // | |
| break; | |
| } | |
| } | |
| } | |
| /** | |
| The function waits for the boot manager timeout expires or hotkey is pressed. | |
| It calls PlatformBootManagerWaitCallback each second. | |
| @param HotkeyTriggered Input hotkey event. | |
| **/ | |
| VOID | |
| BdsWait ( | |
| IN EFI_EVENT HotkeyTriggered | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UINT16 TimeoutRemain; | |
| DEBUG ((DEBUG_INFO, "[Bds]BdsWait ...Zzzzzzzzzzzz...\n")); | |
| TimeoutRemain = PcdGet16 (PcdPlatformBootTimeOut); | |
| while (TimeoutRemain != 0) { | |
| DEBUG ((DEBUG_INFO, "[Bds]BdsWait(%d)..Zzzz...\n", (UINTN)TimeoutRemain)); | |
| PlatformBootManagerWaitCallback (TimeoutRemain); | |
| BdsReadKeys (); // BUGBUG: Only reading can signal HotkeyTriggered | |
| // Can be removed after all keyboard drivers invoke callback in timer callback. | |
| if (HotkeyTriggered != NULL) { | |
| Status = BdsWaitForSingleEvent (HotkeyTriggered, EFI_TIMER_PERIOD_SECONDS (1)); | |
| if (!EFI_ERROR (Status)) { | |
| break; | |
| } | |
| } else { | |
| gBS->Stall (1000000); | |
| } | |
| // | |
| // 0xffff means waiting forever | |
| // BDS with no hotkey provided and 0xffff as timeout will "hang" in the loop | |
| // | |
| if (TimeoutRemain != 0xffff) { | |
| TimeoutRemain--; | |
| } | |
| } | |
| // | |
| // If the platform configured a nonzero and finite time-out, and we have | |
| // actually reached that, report 100% completion to the platform. | |
| // | |
| // Note that the (TimeoutRemain == 0) condition excludes | |
| // PcdPlatformBootTimeOut=0xFFFF, and that's deliberate. | |
| // | |
| if ((PcdGet16 (PcdPlatformBootTimeOut) != 0) && (TimeoutRemain == 0)) { | |
| PlatformBootManagerWaitCallback (0); | |
| } | |
| DEBUG ((DEBUG_INFO, "[Bds]Exit the waiting!\n")); | |
| } | |
| /** | |
| Attempt to boot each boot option in the BootOptions array. | |
| @param BootOptions Input boot option array. | |
| @param BootOptionCount Input boot option count. | |
| @param BootManagerMenu Input boot manager menu. | |
| @retval TRUE Successfully boot one of the boot options. | |
| @retval FALSE Failed boot any of the boot options. | |
| **/ | |
| BOOLEAN | |
| BootBootOptions ( | |
| IN EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions, | |
| IN UINTN BootOptionCount, | |
| IN EFI_BOOT_MANAGER_LOAD_OPTION *BootManagerMenu OPTIONAL | |
| ) | |
| { | |
| UINTN Index; | |
| // | |
| // Report Status Code to indicate BDS starts attempting booting from the UEFI BootOrder list. | |
| // | |
| REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_ATTEMPT_BOOT_ORDER_EVENT)); | |
| // | |
| // Attempt boot each boot option | |
| // | |
| for (Index = 0; Index < BootOptionCount; Index++) { | |
| // | |
| // According to EFI Specification, if a load option is not marked | |
| // as LOAD_OPTION_ACTIVE, the boot manager will not automatically | |
| // load the option. | |
| // | |
| if ((BootOptions[Index].Attributes & LOAD_OPTION_ACTIVE) == 0) { | |
| continue; | |
| } | |
| // | |
| // Boot#### load options with LOAD_OPTION_CATEGORY_APP are executables which are not | |
| // part of the normal boot processing. Boot options with reserved category values will be | |
| // ignored by the boot manager. | |
| // | |
| if ((BootOptions[Index].Attributes & LOAD_OPTION_CATEGORY) != LOAD_OPTION_CATEGORY_BOOT) { | |
| continue; | |
| } | |
| // | |
| // All the driver options should have been processed since | |
| // now boot will be performed. | |
| // | |
| EfiBootManagerBoot (&BootOptions[Index]); | |
| // | |
| // If the boot via Boot#### returns with a status of EFI_SUCCESS, platform firmware | |
| // supports boot manager menu, and if firmware is configured to boot in an | |
| // interactive mode, the boot manager will stop processing the BootOrder variable and | |
| // present a boot manager menu to the user. | |
| // | |
| if ((BootManagerMenu != NULL) && (BootOptions[Index].Status == EFI_SUCCESS)) { | |
| EfiBootManagerBoot (BootManagerMenu); | |
| break; | |
| } | |
| } | |
| return (BOOLEAN)(Index < BootOptionCount); | |
| } | |
| /** | |
| The function will load and start every Driver####, SysPrep#### or PlatformRecovery####. | |
| @param LoadOptions Load option array. | |
| @param LoadOptionCount Load option count. | |
| **/ | |
| VOID | |
| ProcessLoadOptions ( | |
| IN EFI_BOOT_MANAGER_LOAD_OPTION *LoadOptions, | |
| IN UINTN LoadOptionCount | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UINTN Index; | |
| BOOLEAN ReconnectAll; | |
| EFI_BOOT_MANAGER_LOAD_OPTION_TYPE LoadOptionType; | |
| ReconnectAll = FALSE; | |
| LoadOptionType = LoadOptionTypeMax; | |
| // | |
| // Process the driver option | |
| // | |
| for (Index = 0; Index < LoadOptionCount; Index++) { | |
| // | |
| // All the load options in the array should be of the same type. | |
| // | |
| if (Index == 0) { | |
| LoadOptionType = LoadOptions[Index].OptionType; | |
| } | |
| ASSERT (LoadOptionType == LoadOptions[Index].OptionType); | |
| ASSERT (LoadOptionType != LoadOptionTypeBoot); | |
| Status = EfiBootManagerProcessLoadOption (&LoadOptions[Index]); | |
| // | |
| // Status indicates whether the load option is loaded and executed | |
| // LoadOptions[Index].Status is what the load option returns | |
| // | |
| if (!EFI_ERROR (Status)) { | |
| // | |
| // Stop processing if any PlatformRecovery#### returns success. | |
| // | |
| if ((LoadOptions[Index].Status == EFI_SUCCESS) && | |
| (LoadOptionType == LoadOptionTypePlatformRecovery)) | |
| { | |
| break; | |
| } | |
| // | |
| // Only set ReconnectAll flag when the load option executes successfully. | |
| // | |
| if (!EFI_ERROR (LoadOptions[Index].Status) && | |
| ((LoadOptions[Index].Attributes & LOAD_OPTION_FORCE_RECONNECT) != 0)) | |
| { | |
| ReconnectAll = TRUE; | |
| } | |
| } | |
| } | |
| // | |
| // If a driver load option is marked as LOAD_OPTION_FORCE_RECONNECT, | |
| // then all of the EFI drivers in the system will be disconnected and | |
| // reconnected after the last driver load option is processed. | |
| // | |
| if (ReconnectAll && (LoadOptionType == LoadOptionTypeDriver)) { | |
| EfiBootManagerDisconnectAll (); | |
| EfiBootManagerConnectAll (); | |
| } | |
| } | |
| /** | |
| Validate input console variable data. | |
| If found the device path is not a valid device path, remove the variable. | |
| @param VariableName Input console variable name. | |
| **/ | |
| VOID | |
| BdsFormalizeConsoleVariable ( | |
| IN CHAR16 *VariableName | |
| ) | |
| { | |
| EFI_DEVICE_PATH_PROTOCOL *DevicePath; | |
| UINTN VariableSize; | |
| EFI_STATUS Status; | |
| GetEfiGlobalVariable2 (VariableName, (VOID **)&DevicePath, &VariableSize); | |
| if ((DevicePath != NULL) && !IsDevicePathValid (DevicePath, VariableSize)) { | |
| Status = gRT->SetVariable ( | |
| VariableName, | |
| &gEfiGlobalVariableGuid, | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE, | |
| 0, | |
| NULL | |
| ); | |
| // | |
| // Deleting variable with current variable implementation shouldn't fail. | |
| // | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| if (DevicePath != NULL) { | |
| FreePool (DevicePath); | |
| } | |
| } | |
| /** | |
| Formalize OsIndication related variables. | |
| For OsIndicationsSupported, Create a BS/RT/UINT64 variable to report caps | |
| Delete OsIndications variable if it is not NV/BS/RT UINT64. | |
| Item 3 is used to solve case when OS corrupts OsIndications. Here simply delete this NV variable. | |
| Create a boot option for BootManagerMenu if it hasn't been created yet | |
| **/ | |
| VOID | |
| BdsFormalizeOSIndicationVariable ( | |
| VOID | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UINT64 OsIndicationSupport; | |
| UINT64 OsIndication; | |
| UINTN DataSize; | |
| UINT32 Attributes; | |
| EFI_BOOT_MANAGER_LOAD_OPTION BootManagerMenu; | |
| // | |
| // OS indicater support variable | |
| // | |
| Status = EfiBootManagerGetBootManagerMenu (&BootManagerMenu); | |
| if (Status != EFI_NOT_FOUND) { | |
| OsIndicationSupport = EFI_OS_INDICATIONS_BOOT_TO_FW_UI; | |
| EfiBootManagerFreeLoadOption (&BootManagerMenu); | |
| } else { | |
| OsIndicationSupport = 0; | |
| } | |
| if (PcdGetBool (PcdPlatformRecoverySupport)) { | |
| OsIndicationSupport |= EFI_OS_INDICATIONS_START_PLATFORM_RECOVERY; | |
| } | |
| if (PcdGetBool (PcdCapsuleOnDiskSupport)) { | |
| OsIndicationSupport |= EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED; | |
| } | |
| Status = gRT->SetVariable ( | |
| EFI_OS_INDICATIONS_SUPPORT_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS, | |
| sizeof (UINT64), | |
| &OsIndicationSupport | |
| ); | |
| // | |
| // Platform needs to make sure setting volatile variable before calling 3rd party code shouldn't fail. | |
| // | |
| ASSERT_EFI_ERROR (Status); | |
| // | |
| // If OsIndications is invalid, remove it. | |
| // Invalid case | |
| // 1. Data size != UINT64 | |
| // 2. OsIndication value inconsistence | |
| // 3. OsIndication attribute inconsistence | |
| // | |
| OsIndication = 0; | |
| Attributes = 0; | |
| DataSize = sizeof (UINT64); | |
| Status = gRT->GetVariable ( | |
| EFI_OS_INDICATIONS_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| &Attributes, | |
| &DataSize, | |
| &OsIndication | |
| ); | |
| if (Status == EFI_NOT_FOUND) { | |
| return; | |
| } | |
| if ((DataSize != sizeof (OsIndication)) || | |
| ((OsIndication & ~OsIndicationSupport) != 0) || | |
| (Attributes != (EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE)) | |
| ) | |
| { | |
| DEBUG ((DEBUG_ERROR, "[Bds] Unformalized OsIndications variable exists. Delete it\n")); | |
| Status = gRT->SetVariable ( | |
| EFI_OS_INDICATIONS_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| 0, | |
| 0, | |
| NULL | |
| ); | |
| // | |
| // Deleting variable with current variable implementation shouldn't fail. | |
| // | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| } | |
| /** | |
| Validate variables. | |
| **/ | |
| VOID | |
| BdsFormalizeEfiGlobalVariable ( | |
| VOID | |
| ) | |
| { | |
| // | |
| // Validate Console variable. | |
| // | |
| BdsFormalizeConsoleVariable (EFI_CON_IN_VARIABLE_NAME); | |
| BdsFormalizeConsoleVariable (EFI_CON_OUT_VARIABLE_NAME); | |
| BdsFormalizeConsoleVariable (EFI_ERR_OUT_VARIABLE_NAME); | |
| // | |
| // Validate OSIndication related variable. | |
| // | |
| BdsFormalizeOSIndicationVariable (); | |
| } | |
| /** | |
| Service routine for BdsInstance->Entry(). Devices are connected, the | |
| consoles are initialized, and the boot options are tried. | |
| @param This Protocol Instance structure. | |
| **/ | |
| VOID | |
| EFIAPI | |
| BdsEntry ( | |
| IN EFI_BDS_ARCH_PROTOCOL *This | |
| ) | |
| { | |
| EFI_BOOT_MANAGER_LOAD_OPTION *LoadOptions; | |
| UINTN LoadOptionCount; | |
| CHAR16 *FirmwareVendor; | |
| EFI_EVENT HotkeyTriggered; | |
| UINT64 OsIndication; | |
| UINTN DataSize; | |
| EFI_STATUS Status; | |
| UINT32 BootOptionSupport; | |
| UINT16 BootTimeOut; | |
| EDKII_VARIABLE_POLICY_PROTOCOL *VariablePolicy; | |
| UINTN Index; | |
| EFI_BOOT_MANAGER_LOAD_OPTION LoadOption; | |
| UINT16 *BootNext; | |
| CHAR16 BootNextVariableName[sizeof ("Boot####")]; | |
| EFI_BOOT_MANAGER_LOAD_OPTION BootManagerMenu; | |
| BOOLEAN BootFwUi; | |
| BOOLEAN PlatformRecovery; | |
| BOOLEAN BootSuccess; | |
| EFI_DEVICE_PATH_PROTOCOL *FilePath; | |
| EFI_STATUS BootManagerMenuStatus; | |
| EFI_BOOT_MANAGER_LOAD_OPTION PlatformDefaultBootOption; | |
| HotkeyTriggered = NULL; | |
| Status = EFI_SUCCESS; | |
| BootSuccess = FALSE; | |
| // | |
| // Insert the performance probe | |
| // | |
| PERF_CROSSMODULE_END ("DXE"); | |
| PERF_CROSSMODULE_BEGIN ("BDS"); | |
| DEBUG ((DEBUG_INFO, "[Bds] Entry...\n")); | |
| // | |
| // Fill in FirmwareVendor and FirmwareRevision from PCDs | |
| // | |
| FirmwareVendor = (CHAR16 *)PcdGetPtr (PcdFirmwareVendor); | |
| gST->FirmwareVendor = AllocateRuntimeCopyPool (StrSize (FirmwareVendor), FirmwareVendor); | |
| ASSERT (gST->FirmwareVendor != NULL); | |
| gST->FirmwareRevision = PcdGet32 (PcdFirmwareRevision); | |
| // | |
| // Fixup Tasble CRC after we updated Firmware Vendor and Revision | |
| // | |
| gST->Hdr.CRC32 = 0; | |
| gBS->CalculateCrc32 ((VOID *)gST, sizeof (EFI_SYSTEM_TABLE), &gST->Hdr.CRC32); | |
| // | |
| // Validate Variable. | |
| // | |
| BdsFormalizeEfiGlobalVariable (); | |
| // | |
| // Mark the read-only variables if the Variable Lock protocol exists | |
| // | |
| Status = gBS->LocateProtocol (&gEdkiiVariablePolicyProtocolGuid, NULL, (VOID **)&VariablePolicy); | |
| DEBUG ((DEBUG_INFO, "[BdsDxe] Locate Variable Policy protocol - %r\n", Status)); | |
| if (!EFI_ERROR (Status)) { | |
| for (Index = 0; Index < ARRAY_SIZE (mReadOnlyVariables); Index++) { | |
| Status = RegisterBasicVariablePolicy ( | |
| VariablePolicy, | |
| &gEfiGlobalVariableGuid, | |
| mReadOnlyVariables[Index], | |
| VARIABLE_POLICY_NO_MIN_SIZE, | |
| VARIABLE_POLICY_NO_MAX_SIZE, | |
| VARIABLE_POLICY_NO_MUST_ATTR, | |
| VARIABLE_POLICY_NO_CANT_ATTR, | |
| VARIABLE_POLICY_TYPE_LOCK_NOW | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| } | |
| InitializeHwErrRecSupport (); | |
| // | |
| // Initialize L"Timeout" EFI global variable. | |
| // | |
| BootTimeOut = PcdGet16 (PcdPlatformBootTimeOut); | |
| if (BootTimeOut != 0xFFFF) { | |
| // | |
| // If time out value equal 0xFFFF, no need set to 0xFFFF to variable area because UEFI specification | |
| // define same behavior between no value or 0xFFFF value for L"Timeout". | |
| // | |
| BdsDxeSetVariableAndReportStatusCodeOnError ( | |
| EFI_TIME_OUT_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE, | |
| sizeof (UINT16), | |
| &BootTimeOut | |
| ); | |
| } | |
| // | |
| // Initialize L"BootOptionSupport" EFI global variable. | |
| // Lazy-ConIn implictly disables BDS hotkey. | |
| // | |
| BootOptionSupport = EFI_BOOT_OPTION_SUPPORT_APP | EFI_BOOT_OPTION_SUPPORT_SYSPREP; | |
| if (!PcdGetBool (PcdConInConnectOnDemand)) { | |
| BootOptionSupport |= EFI_BOOT_OPTION_SUPPORT_KEY; | |
| SET_BOOT_OPTION_SUPPORT_KEY_COUNT (BootOptionSupport, 3); | |
| } | |
| Status = gRT->SetVariable ( | |
| EFI_BOOT_OPTION_SUPPORT_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS, | |
| sizeof (BootOptionSupport), | |
| &BootOptionSupport | |
| ); | |
| // | |
| // Platform needs to make sure setting volatile variable before calling 3rd party code shouldn't fail. | |
| // | |
| ASSERT_EFI_ERROR (Status); | |
| // | |
| // Cache the "BootNext" NV variable before calling any PlatformBootManagerLib APIs | |
| // This could avoid the "BootNext" set by PlatformBootManagerLib be consumed in this boot. | |
| // | |
| GetEfiGlobalVariable2 (EFI_BOOT_NEXT_VARIABLE_NAME, (VOID **)&BootNext, &DataSize); | |
| if (DataSize != sizeof (UINT16)) { | |
| if (BootNext != NULL) { | |
| FreePool (BootNext); | |
| } | |
| BootNext = NULL; | |
| } | |
| // | |
| // Initialize the platform language variables | |
| // | |
| InitializeLanguage (TRUE); | |
| FilePath = FileDevicePath (NULL, EFI_REMOVABLE_MEDIA_FILE_NAME); | |
| if (FilePath == NULL) { | |
| DEBUG ((DEBUG_ERROR, "Fail to allocate memory for default boot file path. Unable to boot.\n")); | |
| CpuDeadLoop (); | |
| } | |
| Status = EfiBootManagerInitializeLoadOption ( | |
| &PlatformDefaultBootOption, | |
| LoadOptionNumberUnassigned, | |
| LoadOptionTypePlatformRecovery, | |
| LOAD_OPTION_ACTIVE, | |
| L"Default PlatformRecovery", | |
| FilePath, | |
| NULL, | |
| 0 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| // | |
| // System firmware must include a PlatformRecovery#### variable specifying | |
| // a short-form File Path Media Device Path containing the platform default | |
| // file path for removable media if the platform supports Platform Recovery. | |
| // | |
| if (PcdGetBool (PcdPlatformRecoverySupport)) { | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypePlatformRecovery); | |
| if (EfiBootManagerFindLoadOption (&PlatformDefaultBootOption, LoadOptions, LoadOptionCount) == -1) { | |
| for (Index = 0; Index < LoadOptionCount; Index++) { | |
| // | |
| // The PlatformRecovery#### options are sorted by OptionNumber. | |
| // Find the the smallest unused number as the new OptionNumber. | |
| // | |
| if (LoadOptions[Index].OptionNumber != Index) { | |
| break; | |
| } | |
| } | |
| PlatformDefaultBootOption.OptionNumber = Index; | |
| Status = EfiBootManagerLoadOptionToVariable (&PlatformDefaultBootOption); | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| } | |
| FreePool (FilePath); | |
| // | |
| // Report Status Code to indicate connecting drivers will happen | |
| // | |
| REPORT_STATUS_CODE ( | |
| EFI_PROGRESS_CODE, | |
| (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_BEGIN_CONNECTING_DRIVERS) | |
| ); | |
| // | |
| // Initialize ConnectConIn event before calling platform code. | |
| // | |
| if (PcdGetBool (PcdConInConnectOnDemand)) { | |
| Status = gBS->CreateEventEx ( | |
| EVT_NOTIFY_SIGNAL, | |
| TPL_CALLBACK, | |
| BdsDxeOnConnectConInCallBack, | |
| NULL, | |
| &gConnectConInEventGuid, | |
| &gConnectConInEvent | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gConnectConInEvent = NULL; | |
| } | |
| } | |
| // | |
| // Do the platform init, can be customized by OEM/IBV | |
| // Possible things that can be done in PlatformBootManagerBeforeConsole: | |
| // > Update console variable: 1. include hot-plug devices; 2. Clear ConIn and add SOL for AMT | |
| // > Register new Driver#### or Boot#### | |
| // > Register new Key####: e.g.: F12 | |
| // > Signal ReadyToLock event | |
| // > Authentication action: 1. connect Auth devices; 2. Identify auto logon user. | |
| // | |
| PERF_INMODULE_BEGIN ("PlatformBootManagerBeforeConsole"); | |
| PlatformBootManagerBeforeConsole (); | |
| PERF_INMODULE_END ("PlatformBootManagerBeforeConsole"); | |
| // | |
| // Initialize hotkey service | |
| // | |
| EfiBootManagerStartHotkeyService (&HotkeyTriggered); | |
| // | |
| // Execute Driver Options | |
| // | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypeDriver); | |
| ProcessLoadOptions (LoadOptions, LoadOptionCount); | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| // | |
| // Connect consoles | |
| // | |
| PERF_INMODULE_BEGIN ("EfiBootManagerConnectAllDefaultConsoles"); | |
| if (PcdGetBool (PcdConInConnectOnDemand)) { | |
| EfiBootManagerConnectConsoleVariable (ConOut); | |
| EfiBootManagerConnectConsoleVariable (ErrOut); | |
| // | |
| // Do not connect ConIn devices when lazy ConIn feature is ON. | |
| // | |
| } else { | |
| EfiBootManagerConnectAllDefaultConsoles (); | |
| } | |
| PERF_INMODULE_END ("EfiBootManagerConnectAllDefaultConsoles"); | |
| // | |
| // Do the platform specific action after the console is ready | |
| // Possible things that can be done in PlatformBootManagerAfterConsole: | |
| // > Console post action: | |
| // > Dynamically switch output mode from 100x31 to 80x25 for certain senarino | |
| // > Signal console ready platform customized event | |
| // > Run diagnostics like memory testing | |
| // > Connect certain devices | |
| // > Dispatch aditional option roms | |
| // > Special boot: e.g.: USB boot, enter UI | |
| // | |
| PERF_INMODULE_BEGIN ("PlatformBootManagerAfterConsole"); | |
| PlatformBootManagerAfterConsole (); | |
| PERF_INMODULE_END ("PlatformBootManagerAfterConsole"); | |
| // | |
| // If any component set PcdTestKeyUsed to TRUE because use of a test key | |
| // was detected, then display a warning message on the debug log and the console | |
| // | |
| if (PcdGetBool (PcdTestKeyUsed)) { | |
| DEBUG ((DEBUG_ERROR, "**********************************\n")); | |
| DEBUG ((DEBUG_ERROR, "** WARNING: Test Key is used. **\n")); | |
| DEBUG ((DEBUG_ERROR, "**********************************\n")); | |
| Print (L"** WARNING: Test Key is used. **\n"); | |
| } | |
| // | |
| // Boot to Boot Manager Menu when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set. Skip HotkeyBoot | |
| // | |
| DataSize = sizeof (UINT64); | |
| Status = gRT->GetVariable ( | |
| EFI_OS_INDICATIONS_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| NULL, | |
| &DataSize, | |
| &OsIndication | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| OsIndication = 0; | |
| } | |
| DEBUG_CODE_BEGIN (); | |
| EFI_BOOT_MANAGER_LOAD_OPTION_TYPE LoadOptionType; | |
| DEBUG ((DEBUG_INFO, "[Bds]OsIndication: %016x\n", OsIndication)); | |
| DEBUG ((DEBUG_INFO, "[Bds]=============Begin Load Options Dumping ...=============\n")); | |
| for (LoadOptionType = 0; LoadOptionType < LoadOptionTypeMax; LoadOptionType++) { | |
| DEBUG (( | |
| DEBUG_INFO, | |
| " %s Options:\n", | |
| mBdsLoadOptionName[LoadOptionType] | |
| )); | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionType); | |
| for (Index = 0; Index < LoadOptionCount; Index++) { | |
| DEBUG (( | |
| DEBUG_INFO, | |
| " %s%04x: %s \t\t 0x%04x\n", | |
| mBdsLoadOptionName[LoadOptionType], | |
| LoadOptions[Index].OptionNumber, | |
| LoadOptions[Index].Description, | |
| LoadOptions[Index].Attributes | |
| )); | |
| } | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| } | |
| DEBUG ((DEBUG_INFO, "[Bds]=============End Load Options Dumping=============\n")); | |
| DEBUG_CODE_END (); | |
| // | |
| // BootManagerMenu doesn't contain the correct information when return status is EFI_NOT_FOUND. | |
| // | |
| BootManagerMenuStatus = EfiBootManagerGetBootManagerMenu (&BootManagerMenu); | |
| BootFwUi = (BOOLEAN)((OsIndication & EFI_OS_INDICATIONS_BOOT_TO_FW_UI) != 0); | |
| PlatformRecovery = (BOOLEAN)((OsIndication & EFI_OS_INDICATIONS_START_PLATFORM_RECOVERY) != 0); | |
| // | |
| // Clear EFI_OS_INDICATIONS_BOOT_TO_FW_UI to acknowledge OS | |
| // | |
| if (BootFwUi || PlatformRecovery) { | |
| OsIndication &= ~((UINT64)(EFI_OS_INDICATIONS_BOOT_TO_FW_UI | EFI_OS_INDICATIONS_START_PLATFORM_RECOVERY)); | |
| Status = gRT->SetVariable ( | |
| EFI_OS_INDICATIONS_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE, | |
| sizeof (UINT64), | |
| &OsIndication | |
| ); | |
| // | |
| // Changing the content without increasing its size with current variable implementation shouldn't fail. | |
| // | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| // | |
| // Launch Boot Manager Menu directly when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set. Skip HotkeyBoot | |
| // | |
| if (BootFwUi && (BootManagerMenuStatus != EFI_NOT_FOUND)) { | |
| // | |
| // Follow generic rule, Call BdsDxeOnConnectConInCallBack to connect ConIn before enter UI | |
| // | |
| if (PcdGetBool (PcdConInConnectOnDemand)) { | |
| BdsDxeOnConnectConInCallBack (NULL, NULL); | |
| } | |
| // | |
| // Directly enter the setup page. | |
| // | |
| EfiBootManagerBoot (&BootManagerMenu); | |
| } | |
| if (!PlatformRecovery) { | |
| // | |
| // Execute SysPrep#### | |
| // | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypeSysPrep); | |
| ProcessLoadOptions (LoadOptions, LoadOptionCount); | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| // | |
| // Execute Key#### | |
| // | |
| PERF_INMODULE_BEGIN ("BdsWait"); | |
| BdsWait (HotkeyTriggered); | |
| PERF_INMODULE_END ("BdsWait"); | |
| // | |
| // BdsReadKeys() can be removed after all keyboard drivers invoke callback in timer callback. | |
| // | |
| BdsReadKeys (); | |
| EfiBootManagerHotkeyBoot (); | |
| if (BootNext != NULL) { | |
| // | |
| // Delete "BootNext" NV variable before transferring control to it to prevent loops. | |
| // | |
| Status = gRT->SetVariable ( | |
| EFI_BOOT_NEXT_VARIABLE_NAME, | |
| &gEfiGlobalVariableGuid, | |
| 0, | |
| 0, | |
| NULL | |
| ); | |
| // | |
| // Deleting NV variable shouldn't fail unless it doesn't exist. | |
| // | |
| ASSERT (Status == EFI_SUCCESS || Status == EFI_NOT_FOUND); | |
| // | |
| // Boot to "BootNext" | |
| // | |
| UnicodeSPrint (BootNextVariableName, sizeof (BootNextVariableName), L"Boot%04x", *BootNext); | |
| Status = EfiBootManagerVariableToLoadOption (BootNextVariableName, &LoadOption); | |
| if (!EFI_ERROR (Status)) { | |
| EfiBootManagerBoot (&LoadOption); | |
| EfiBootManagerFreeLoadOption (&LoadOption); | |
| if ((LoadOption.Status == EFI_SUCCESS) && | |
| (BootManagerMenuStatus != EFI_NOT_FOUND) && | |
| (LoadOption.OptionNumber != BootManagerMenu.OptionNumber)) | |
| { | |
| // | |
| // Boot to Boot Manager Menu upon EFI_SUCCESS | |
| // Exception: Do not boot again when the BootNext points to Boot Manager Menu. | |
| // | |
| EfiBootManagerBoot (&BootManagerMenu); | |
| } | |
| } | |
| } | |
| do { | |
| // | |
| // Retry to boot if any of the boot succeeds | |
| // | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypeBoot); | |
| BootSuccess = BootBootOptions (LoadOptions, LoadOptionCount, (BootManagerMenuStatus != EFI_NOT_FOUND) ? &BootManagerMenu : NULL); | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| } while (BootSuccess); | |
| } | |
| if (BootManagerMenuStatus != EFI_NOT_FOUND) { | |
| EfiBootManagerFreeLoadOption (&BootManagerMenu); | |
| } | |
| if (!BootSuccess) { | |
| if (PcdGetBool (PcdPlatformRecoverySupport)) { | |
| LoadOptions = EfiBootManagerGetLoadOptions (&LoadOptionCount, LoadOptionTypePlatformRecovery); | |
| ProcessLoadOptions (LoadOptions, LoadOptionCount); | |
| EfiBootManagerFreeLoadOptions (LoadOptions, LoadOptionCount); | |
| } else { | |
| // | |
| // When platform recovery is not enabled, still boot to platform default file path. | |
| // | |
| EfiBootManagerProcessLoadOption (&PlatformDefaultBootOption); | |
| } | |
| } | |
| EfiBootManagerFreeLoadOption (&PlatformDefaultBootOption); | |
| DEBUG ((DEBUG_ERROR, "[Bds] Unable to boot!\n")); | |
| PlatformBootManagerUnableToBoot (); | |
| CpuDeadLoop (); | |
| } | |
| /** | |
| Set the variable and report the error through status code upon failure. | |
| @param VariableName A Null-terminated string that is the name of the vendor's variable. | |
| Each VariableName is unique for each VendorGuid. VariableName must | |
| contain 1 or more characters. If VariableName is an empty string, | |
| then EFI_INVALID_PARAMETER is returned. | |
| @param VendorGuid A unique identifier for the vendor. | |
| @param Attributes Attributes bitmask to set for the variable. | |
| @param DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE, | |
| or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero | |
| causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is | |
| set, then a SetVariable() call with a DataSize of zero will not cause any change to | |
| the variable value (the timestamp associated with the variable may be updated however | |
| even if no new data value is provided,see the description of the | |
| EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not | |
| be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated). | |
| @param Data The contents for the variable. | |
| @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as | |
| defined by the Attributes. | |
| @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits, name, and GUID was supplied, or the | |
| DataSize exceeds the maximum allowed. | |
| @retval EFI_INVALID_PARAMETER VariableName is an empty string. | |
| @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data. | |
| @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. | |
| @retval EFI_WRITE_PROTECTED The variable in question is read-only. | |
| @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted. | |
| @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS | |
| being set, but the AuthInfo does NOT pass the validation check carried out by the firmware. | |
| @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found. | |
| **/ | |
| EFI_STATUS | |
| BdsDxeSetVariableAndReportStatusCodeOnError ( | |
| IN CHAR16 *VariableName, | |
| IN EFI_GUID *VendorGuid, | |
| IN UINT32 Attributes, | |
| IN UINTN DataSize, | |
| IN VOID *Data | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EDKII_SET_VARIABLE_STATUS *SetVariableStatus; | |
| UINTN NameSize; | |
| Status = gRT->SetVariable ( | |
| VariableName, | |
| VendorGuid, | |
| Attributes, | |
| DataSize, | |
| Data | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| NameSize = StrSize (VariableName); | |
| SetVariableStatus = AllocatePool (sizeof (EDKII_SET_VARIABLE_STATUS) + NameSize + DataSize); | |
| if (SetVariableStatus != NULL) { | |
| CopyGuid (&SetVariableStatus->Guid, VendorGuid); | |
| SetVariableStatus->NameSize = NameSize; | |
| SetVariableStatus->DataSize = DataSize; | |
| SetVariableStatus->SetStatus = Status; | |
| SetVariableStatus->Attributes = Attributes; | |
| CopyMem (SetVariableStatus + 1, VariableName, NameSize); | |
| CopyMem (((UINT8 *)(SetVariableStatus + 1)) + NameSize, Data, DataSize); | |
| REPORT_STATUS_CODE_EX ( | |
| EFI_ERROR_CODE, | |
| PcdGet32 (PcdErrorCodeSetVariable), | |
| 0, | |
| NULL, | |
| &gEdkiiStatusCodeDataTypeVariableGuid, | |
| SetVariableStatus, | |
| sizeof (EDKII_SET_VARIABLE_STATUS) + NameSize + DataSize | |
| ); | |
| FreePool (SetVariableStatus); | |
| } | |
| } | |
| return Status; | |
| } |