blob: f740f9cd507c59410f95c8b18eae79682085bca1 [file] [log] [blame]
/** @file
The firmware file related definitions in PI.
Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Revision Reference:
PI Version 1.6.
**/
#ifndef __PI_FIRMWARE_FILE_H__
#define __PI_FIRMWARE_FILE_H__
#pragma pack(1)
///
/// Used to verify the integrity of the file.
///
typedef union {
struct {
///
/// The IntegrityCheck.Checksum.Header field is an 8-bit checksum of the file
/// header. The State and IntegrityCheck.Checksum.File fields are assumed
/// to be zero and the checksum is calculated such that the entire header sums to zero.
///
UINT8 Header;
///
/// If the FFS_ATTRIB_CHECKSUM (see definition below) bit of the Attributes
/// field is set to one, the IntegrityCheck.Checksum.File field is an 8-bit
/// checksum of the file data.
/// If the FFS_ATTRIB_CHECKSUM bit of the Attributes field is cleared to zero,
/// the IntegrityCheck.Checksum.File field must be initialized with a value of
/// 0xAA. The IntegrityCheck.Checksum.File field is valid any time the
/// EFI_FILE_DATA_VALID bit is set in the State field.
///
UINT8 File;
} Checksum;
///
/// This is the full 16 bits of the IntegrityCheck field.
///
UINT16 Checksum16;
} EFI_FFS_INTEGRITY_CHECK;
///
/// FFS_FIXED_CHECKSUM is the checksum value used when the
/// FFS_ATTRIB_CHECKSUM attribute bit is clear.
///
#define FFS_FIXED_CHECKSUM 0xAA
typedef UINT8 EFI_FV_FILETYPE;
typedef UINT8 EFI_FFS_FILE_ATTRIBUTES;
typedef UINT8 EFI_FFS_FILE_STATE;
///
/// File Types Definitions
///
#define EFI_FV_FILETYPE_ALL 0x00
#define EFI_FV_FILETYPE_RAW 0x01
#define EFI_FV_FILETYPE_FREEFORM 0x02
#define EFI_FV_FILETYPE_SECURITY_CORE 0x03
#define EFI_FV_FILETYPE_PEI_CORE 0x04
#define EFI_FV_FILETYPE_DXE_CORE 0x05
#define EFI_FV_FILETYPE_PEIM 0x06
#define EFI_FV_FILETYPE_DRIVER 0x07
#define EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER 0x08
#define EFI_FV_FILETYPE_APPLICATION 0x09
#define EFI_FV_FILETYPE_MM 0x0A
#define EFI_FV_FILETYPE_SMM EFI_FV_FILETYPE_MM
#define EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE 0x0B
#define EFI_FV_FILETYPE_COMBINED_MM_DXE 0x0C
#define EFI_FV_FILETYPE_COMBINED_SMM_DXE EFI_FV_FILETYPE_COMBINED_MM_DXE
#define EFI_FV_FILETYPE_MM_CORE 0x0D
#define EFI_FV_FILETYPE_SMM_CORE EFI_FV_FILETYPE_MM_CORE
#define EFI_FV_FILETYPE_MM_STANDALONE 0x0E
#define EFI_FV_FILETYPE_MM_CORE_STANDALONE 0x0F
#define EFI_FV_FILETYPE_OEM_MIN 0xc0
#define EFI_FV_FILETYPE_OEM_MAX 0xdf
#define EFI_FV_FILETYPE_DEBUG_MIN 0xe0
#define EFI_FV_FILETYPE_DEBUG_MAX 0xef
#define EFI_FV_FILETYPE_FFS_MIN 0xf0
#define EFI_FV_FILETYPE_FFS_MAX 0xff
#define EFI_FV_FILETYPE_FFS_PAD 0xf0
///
/// FFS File Attributes.
///
#define FFS_ATTRIB_LARGE_FILE 0x01
#define FFS_ATTRIB_DATA_ALIGNMENT_2 0x02
#define FFS_ATTRIB_FIXED 0x04
#define FFS_ATTRIB_DATA_ALIGNMENT 0x38
#define FFS_ATTRIB_CHECKSUM 0x40
///
/// FFS File State Bits.
///
#define EFI_FILE_HEADER_CONSTRUCTION 0x01
#define EFI_FILE_HEADER_VALID 0x02
#define EFI_FILE_DATA_VALID 0x04
#define EFI_FILE_MARKED_FOR_UPDATE 0x08
#define EFI_FILE_DELETED 0x10
#define EFI_FILE_HEADER_INVALID 0x20
///
/// Each file begins with the header that describe the
/// contents and state of the files.
///
typedef struct {
///
/// This GUID is the file name. It is used to uniquely identify the file.
///
EFI_GUID Name;
///
/// Used to verify the integrity of the file.
///
EFI_FFS_INTEGRITY_CHECK IntegrityCheck;
///
/// Identifies the type of file.
///
EFI_FV_FILETYPE Type;
///
/// Declares various file attribute bits.
///
EFI_FFS_FILE_ATTRIBUTES Attributes;
///
/// The length of the file in bytes, including the FFS header.
///
UINT8 Size[3];
///
/// Used to track the state of the file throughout the life of the file from creation to deletion.
///
EFI_FFS_FILE_STATE State;
} EFI_FFS_FILE_HEADER;
typedef struct {
///
/// This GUID is the file name. It is used to uniquely identify the file. There may be only
/// one instance of a file with the file name GUID of Name in any given firmware
/// volume, except if the file type is EFI_FV_FILETYPE_FFS_PAD.
///
EFI_GUID Name;
///
/// Used to verify the integrity of the file.
///
EFI_FFS_INTEGRITY_CHECK IntegrityCheck;
///
/// Identifies the type of file.
///
EFI_FV_FILETYPE Type;
///
/// Declares various file attribute bits.
///
EFI_FFS_FILE_ATTRIBUTES Attributes;
///
/// The length of the file in bytes, including the FFS header.
/// The length of the file data is either (Size - sizeof(EFI_FFS_FILE_HEADER)). This calculation means a
/// zero-length file has a Size of 24 bytes, which is sizeof(EFI_FFS_FILE_HEADER).
/// Size is not required to be a multiple of 8 bytes. Given a file F, the next file header is
/// located at the next 8-byte aligned firmware volume offset following the last byte of the file F.
///
UINT8 Size[3];
///
/// Used to track the state of the file throughout the life of the file from creation to deletion.
///
EFI_FFS_FILE_STATE State;
///
/// If FFS_ATTRIB_LARGE_FILE is set in Attributes, then ExtendedSize exists and Size must be set to zero.
/// If FFS_ATTRIB_LARGE_FILE is not set then EFI_FFS_FILE_HEADER is used.
///
UINT64 ExtendedSize;
} EFI_FFS_FILE_HEADER2;
#define IS_FFS_FILE2(FfsFileHeaderPtr) \
(((((EFI_FFS_FILE_HEADER *) (UINTN) FfsFileHeaderPtr)->Attributes) & FFS_ATTRIB_LARGE_FILE) == FFS_ATTRIB_LARGE_FILE)
///
/// The argument passed as the FfsFileHeaderPtr parameter to the
/// FFS_FILE_SIZE() function-like macro below must not have side effects:
/// FfsFileHeaderPtr is evaluated multiple times.
///
#define FFS_FILE_SIZE(FfsFileHeaderPtr) ((UINT32) (\
(((EFI_FFS_FILE_HEADER *) (UINTN) (FfsFileHeaderPtr))->Size[0] ) | \
(((EFI_FFS_FILE_HEADER *) (UINTN) (FfsFileHeaderPtr))->Size[1] << 8) | \
(((EFI_FFS_FILE_HEADER *) (UINTN) (FfsFileHeaderPtr))->Size[2] << 16)))
#define FFS_FILE2_SIZE(FfsFileHeaderPtr) \
((UINT32) (((EFI_FFS_FILE_HEADER2 *) (UINTN) FfsFileHeaderPtr)->ExtendedSize))
typedef UINT8 EFI_SECTION_TYPE;
///
/// Pseudo type. It is used as a wild card when retrieving sections.
/// The section type EFI_SECTION_ALL matches all section types.
///
#define EFI_SECTION_ALL 0x00
///
/// Encapsulation section Type values.
///
#define EFI_SECTION_COMPRESSION 0x01
#define EFI_SECTION_GUID_DEFINED 0x02
#define EFI_SECTION_DISPOSABLE 0x03
///
/// Leaf section Type values.
///
#define EFI_SECTION_PE32 0x10
#define EFI_SECTION_PIC 0x11
#define EFI_SECTION_TE 0x12
#define EFI_SECTION_DXE_DEPEX 0x13
#define EFI_SECTION_VERSION 0x14
#define EFI_SECTION_USER_INTERFACE 0x15
#define EFI_SECTION_COMPATIBILITY16 0x16
#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17
#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18
#define EFI_SECTION_RAW 0x19
#define EFI_SECTION_PEI_DEPEX 0x1B
#define EFI_SECTION_MM_DEPEX 0x1C
#define EFI_SECTION_SMM_DEPEX EFI_SECTION_MM_DEPEX
///
/// Common section header.
///
typedef struct {
///
/// A 24-bit unsigned integer that contains the total size of the section in bytes,
/// including the EFI_COMMON_SECTION_HEADER.
///
UINT8 Size[3];
EFI_SECTION_TYPE Type;
///
/// Declares the section type.
///
} EFI_COMMON_SECTION_HEADER;
typedef struct {
///
/// A 24-bit unsigned integer that contains the total size of the section in bytes,
/// including the EFI_COMMON_SECTION_HEADER.
///
UINT8 Size[3];
EFI_SECTION_TYPE Type;
///
/// If Size is 0xFFFFFF, then ExtendedSize contains the size of the section. If
/// Size is not equal to 0xFFFFFF, then this field does not exist.
///
UINT32 ExtendedSize;
} EFI_COMMON_SECTION_HEADER2;
///
/// Leaf section type that contains an
/// IA-32 16-bit executable image.
///
typedef EFI_COMMON_SECTION_HEADER EFI_COMPATIBILITY16_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_COMPATIBILITY16_SECTION2;
///
/// CompressionType of EFI_COMPRESSION_SECTION.
///
#define EFI_NOT_COMPRESSED 0x00
#define EFI_STANDARD_COMPRESSION 0x01
///
/// An encapsulation section type in which the
/// section data is compressed.
///
typedef struct {
///
/// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION.
///
EFI_COMMON_SECTION_HEADER CommonHeader;
///
/// The UINT32 that indicates the size of the section data after decompression.
///
UINT32 UncompressedLength;
///
/// Indicates which compression algorithm is used.
///
UINT8 CompressionType;
} EFI_COMPRESSION_SECTION;
typedef struct {
///
/// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION.
///
EFI_COMMON_SECTION_HEADER2 CommonHeader;
///
/// UINT32 that indicates the size of the section data after decompression.
///
UINT32 UncompressedLength;
///
/// Indicates which compression algorithm is used.
///
UINT8 CompressionType;
} EFI_COMPRESSION_SECTION2;
///
/// An encapsulation section type in which the section data is disposable.
/// A disposable section is an encapsulation section in which the section data may be disposed of during
/// the process of creating or updating a firmware image without significant impact on the usefulness of
/// the file. The Type field in the section header is set to EFI_SECTION_DISPOSABLE. This
/// allows optional or descriptive data to be included with the firmware file which can be removed in
/// order to conserve space. The contents of this section are implementation specific, but might contain
/// debug data or detailed integration instructions.
///
typedef EFI_COMMON_SECTION_HEADER EFI_DISPOSABLE_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_DISPOSABLE_SECTION2;
///
/// The leaf section which could be used to determine the dispatch order of DXEs.
///
typedef EFI_COMMON_SECTION_HEADER EFI_DXE_DEPEX_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_DXE_DEPEX_SECTION2;
///
/// The leaf section which contains a PI FV.
///
typedef EFI_COMMON_SECTION_HEADER EFI_FIRMWARE_VOLUME_IMAGE_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_FIRMWARE_VOLUME_IMAGE_SECTION2;
///
/// The leaf section which contains a single GUID.
///
typedef struct {
///
/// Common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID.
///
EFI_COMMON_SECTION_HEADER CommonHeader;
///
/// This GUID is defined by the creator of the file. It is a vendor-defined file type.
///
EFI_GUID SubTypeGuid;
} EFI_FREEFORM_SUBTYPE_GUID_SECTION;
typedef struct {
///
/// The common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID.
///
EFI_COMMON_SECTION_HEADER2 CommonHeader;
///
/// This GUID is defined by the creator of the file. It is a vendor-defined file type.
///
EFI_GUID SubTypeGuid;
} EFI_FREEFORM_SUBTYPE_GUID_SECTION2;
///
/// Attributes of EFI_GUID_DEFINED_SECTION.
///
#define EFI_GUIDED_SECTION_PROCESSING_REQUIRED 0x01
#define EFI_GUIDED_SECTION_AUTH_STATUS_VALID 0x02
///
/// The leaf section which is encapsulation defined by specific GUID.
///
typedef struct {
///
/// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED.
///
EFI_COMMON_SECTION_HEADER CommonHeader;
///
/// The GUID that defines the format of the data that follows. It is a vendor-defined section type.
///
EFI_GUID SectionDefinitionGuid;
///
/// Contains the offset in bytes from the beginning of the common header to the first byte of the data.
///
UINT16 DataOffset;
///
/// The bit field that declares some specific characteristics of the section contents.
///
UINT16 Attributes;
} EFI_GUID_DEFINED_SECTION;
typedef struct {
///
/// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED.
///
EFI_COMMON_SECTION_HEADER2 CommonHeader;
///
/// The GUID that defines the format of the data that follows. It is a vendor-defined section type.
///
EFI_GUID SectionDefinitionGuid;
///
/// Contains the offset in bytes from the beginning of the common header to the first byte of the data.
///
UINT16 DataOffset;
///
/// The bit field that declares some specific characteristics of the section contents.
///
UINT16 Attributes;
} EFI_GUID_DEFINED_SECTION2;
///
/// The leaf section which contains PE32+ image.
///
typedef EFI_COMMON_SECTION_HEADER EFI_PE32_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_PE32_SECTION2;
///
/// The leaf section used to determine the dispatch order of PEIMs.
///
typedef EFI_COMMON_SECTION_HEADER EFI_PEI_DEPEX_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_PEI_DEPEX_SECTION2;
///
/// A leaf section type that contains a position-independent-code (PIC) image.
/// A PIC image section is a leaf section that contains a position-independent-code (PIC) image.
/// In addition to normal PE32+ images that contain relocation information, PEIM executables may be
/// PIC and are referred to as PIC images. A PIC image is the same as a PE32+ image except that all
/// relocation information has been stripped from the image and the image can be moved and will
/// execute correctly without performing any relocation or other fix-ups. EFI_PIC_SECTION2 must
/// be used if the section is 16MB or larger.
///
typedef EFI_COMMON_SECTION_HEADER EFI_PIC_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_PIC_SECTION2;
///
/// The leaf section which constains the position-independent-code image.
///
typedef EFI_COMMON_SECTION_HEADER EFI_TE_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_TE_SECTION2;
///
/// The leaf section which contains an array of zero or more bytes.
///
typedef EFI_COMMON_SECTION_HEADER EFI_RAW_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_RAW_SECTION2;
///
/// The SMM dependency expression section is a leaf section that contains a dependency expression that
/// is used to determine the dispatch order for SMM drivers. Before the SMRAM invocation of the
/// SMM driver's entry point, this dependency expression must evaluate to TRUE. See the Platform
/// Initialization Specification, Volume 2, for details regarding the format of the dependency expression.
/// The dependency expression may refer to protocols installed in either the UEFI or the SMM protocol
/// database. EFI_SMM_DEPEX_SECTION2 must be used if the section is 16MB or larger.
///
typedef EFI_COMMON_SECTION_HEADER EFI_SMM_DEPEX_SECTION;
typedef EFI_COMMON_SECTION_HEADER2 EFI_SMM_DEPEX_SECTION2;
///
/// The leaf section which contains a unicode string that
/// is human readable file name.
///
typedef struct {
EFI_COMMON_SECTION_HEADER CommonHeader;
///
/// Array of unicode string.
///
CHAR16 FileNameString[1];
} EFI_USER_INTERFACE_SECTION;
typedef struct {
EFI_COMMON_SECTION_HEADER2 CommonHeader;
CHAR16 FileNameString[1];
} EFI_USER_INTERFACE_SECTION2;
///
/// The leaf section which contains a numeric build number and
/// an optional unicode string that represents the file revision.
///
typedef struct {
EFI_COMMON_SECTION_HEADER CommonHeader;
UINT16 BuildNumber;
///
/// Array of unicode string.
///
CHAR16 VersionString[1];
} EFI_VERSION_SECTION;
typedef struct {
EFI_COMMON_SECTION_HEADER2 CommonHeader;
///
/// A UINT16 that represents a particular build. Subsequent builds have monotonically
/// increasing build numbers relative to earlier builds.
///
UINT16 BuildNumber;
CHAR16 VersionString[1];
} EFI_VERSION_SECTION2;
///
/// The argument passed as the SectionHeaderPtr parameter to the SECTION_SIZE()
/// and IS_SECTION2() function-like macros below must not have side effects:
/// SectionHeaderPtr is evaluated multiple times.
///
#define SECTION_SIZE(SectionHeaderPtr) ((UINT32) (\
(((EFI_COMMON_SECTION_HEADER *) (UINTN) (SectionHeaderPtr))->Size[0] ) | \
(((EFI_COMMON_SECTION_HEADER *) (UINTN) (SectionHeaderPtr))->Size[1] << 8) | \
(((EFI_COMMON_SECTION_HEADER *) (UINTN) (SectionHeaderPtr))->Size[2] << 16)))
#define IS_SECTION2(SectionHeaderPtr) \
(SECTION_SIZE (SectionHeaderPtr) == 0x00ffffff)
#define SECTION2_SIZE(SectionHeaderPtr) \
(((EFI_COMMON_SECTION_HEADER2 *) (UINTN) SectionHeaderPtr)->ExtendedSize)
#pragma pack()
#endif