blob: 360628ad2145d538e372bc13fa75fdef662fa76d [file] [log] [blame]
/** @file
Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_
#define _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_
#include <Protocol/DevicePath.h>
///
/// Global ID for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI.
///
#define EDKII_PEI_STORAGE_SECURITY_CMD_PPI_GUID \
{ \
0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } \
}
//
// Forward declaration for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI.
//
typedef struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI EDKII_PEI_STORAGE_SECURITY_CMD_PPI;
//
// Revision The revision to which the Storage Security Command interface adheres.
// All future revisions must be backwards compatible.
// If a future version is not back wards compatible it is not the same GUID.
//
#define EDKII_STORAGE_SECURITY_PPI_REVISION 0x00010000
/**
Gets the count of storage security devices that one specific driver detects.
@param[in] This The PPI instance pointer.
@param[out] NumberofDevices The number of storage security devices discovered.
@retval EFI_SUCCESS The operation performed successfully.
@retval EFI_INVALID_PARAMETER The parameters are invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES)(
IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This,
OUT UINTN *NumberofDevices
);
/**
Gets the device path of a specific storage security device.
@param[in] This The PPI instance pointer.
@param[in] DeviceIndex Specifies the storage security device to which
the function wants to talk. Because the driver
that implements Storage Security Command PPIs
will manage multiple storage devices, the PPIs
that want to talk to a single device must specify
the device index that was assigned during the
enumeration process. This index is a number from
one to NumberofDevices.
@param[out] DevicePathLength The length of the device path in bytes specified
by DevicePath.
@param[out] DevicePath The device path of storage security device.
This field re-uses EFI Device Path Protocol as
defined by Section 10.2 EFI Device Path Protocol
of UEFI 2.7 Specification.
@retval EFI_SUCCESS The operation succeeds.
@retval EFI_INVALID_PARAMETER DevicePathLength or DevicePath is NULL.
@retval EFI_NOT_FOUND The specified storage security device not found.
@retval EFI_OUT_OF_RESOURCES The operation fails due to lack of resources.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH)(
IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This,
IN UINTN DeviceIndex,
OUT UINTN *DevicePathLength,
OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
Send a security protocol command to a device that receives data and/or the result
of one or more commands sent by SendData.
The ReceiveData function sends a security protocol command to the given DeviceIndex.
The security protocol command sent is defined by SecurityProtocolId and contains
the security protocol specific data SecurityProtocolSpecificData. The function
returns the data from the security protocol command in PayloadBuffer.
For devices supporting the SCSI command set, the security protocol command is sent
using the SECURITY PROTOCOL IN command defined in SPC-4.
For devices supporting the ATA command set, the security protocol command is sent
using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
is non-zero.
If the PayloadBufferSize is zero, the security protocol command is sent using the
Trusted Non-Data command defined in ATA8-ACS.
If PayloadBufferSize is too small to store the available data from the security
protocol command, the function shall copy PayloadBufferSize bytes into the
PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
the function shall return EFI_INVALID_PARAMETER.
If the given DeviceIndex does not support security protocol commands, the function
shall return EFI_UNSUPPORTED.
If the security protocol fails to complete within the Timeout period, the function
shall return EFI_TIMEOUT.
If the security protocol command completes without an error, the function shall
return EFI_SUCCESS. If the security protocol command completes with an error, the
function shall return EFI_DEVICE_ERROR.
@param[in] This The PPI instance pointer.
@param[in] DeviceIndex Specifies the storage security device to which the
function wants to talk. Because the driver that
implements Storage Security Command PPIs will manage
multiple storage devices, the PPIs that want to talk
to a single device must specify the device index
that was assigned during the enumeration process.
This index is a number from one to NumberofDevices.
@param[in] Timeout The timeout, in 100ns units, to use for the execution
of the security protocol command. A Timeout value
of 0 means that this function will wait indefinitely
for the security protocol command to execute. If
Timeout is greater than zero, then this function
will return EFI_TIMEOUT if the time required to
execute the receive data command is greater than
Timeout.
@param[in] SecurityProtocolId
The value of the "Security Protocol" parameter of
the security protocol command to be sent.
@param[in] SecurityProtocolSpecificData
The value of the "Security Protocol Specific"
parameter of the security protocol command to be
sent.
@param[in] PayloadBufferSize
Size in bytes of the payload data buffer.
@param[out] PayloadBuffer A pointer to a destination buffer to store the
security protocol command specific payload data
for the security protocol command. The caller is
responsible for having either implicit or explicit
ownership of the buffer.
@param[out] PayloadTransferSize
A pointer to a buffer to store the size in bytes
of the data written to the payload data buffer.
@retval EFI_SUCCESS The security protocol command completed
successfully.
@retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to
store the available data from the device.
The PayloadBuffer contains the truncated
data.
@retval EFI_UNSUPPORTED The given DeviceIndex does not support
security protocol commands.
@retval EFI_DEVICE_ERROR The security protocol command completed
with an error.
@retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize
is NULL and PayloadBufferSize is non-zero.
@retval EFI_TIMEOUT A timeout occurred while waiting for the
security protocol command to execute.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA)(
IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This,
IN UINTN DeviceIndex,
IN UINT64 Timeout,
IN UINT8 SecurityProtocolId,
IN UINT16 SecurityProtocolSpecificData,
IN UINTN PayloadBufferSize,
OUT VOID *PayloadBuffer,
OUT UINTN *PayloadTransferSize
);
/**
Send a security protocol command to a device.
The SendData function sends a security protocol command containing the payload
PayloadBuffer to the given DeviceIndex. The security protocol command sent is
defined by SecurityProtocolId and contains the security protocol specific data
SecurityProtocolSpecificData. If the underlying protocol command requires a
specific padding for the command payload, the SendData function shall add padding
bytes to the command payload to satisfy the padding requirements.
For devices supporting the SCSI command set, the security protocol command is
sent using the SECURITY PROTOCOL OUT command defined in SPC-4.
For devices supporting the ATA command set, the security protocol command is
sent using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
is non-zero. If the PayloadBufferSize is zero, the security protocol command
is sent using the Trusted Non-Data command defined in ATA8-ACS.
If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
return EFI_INVALID_PARAMETER.
If the given DeviceIndex does not support security protocol commands, the function
shall return EFI_UNSUPPORTED.
If the security protocol fails to complete within the Timeout period, the function
shall return EFI_TIMEOUT.
If the security protocol command completes without an error, the function shall
return EFI_SUCCESS. If the security protocol command completes with an error,
the functio shall return EFI_DEVICE_ERROR.
@param[in] This The PPI instance pointer.
@param[in] DeviceIndex The ID of the device.
@param[in] Timeout The timeout, in 100ns units, to use for the execution
of the security protocol command. A Timeout value
of 0 means that this function will wait indefinitely
for the security protocol command to execute. If
Timeout is greater than zero, then this function
will return EFI_TIMEOUT if the time required to
execute the receive data command is greater than
Timeout.
@param[in] SecurityProtocolId
The value of the "Security Protocol" parameter of
the security protocol command to be sent.
@param[in] SecurityProtocolSpecificData
The value of the "Security Protocol Specific"
parameter of the security protocol command to be
sent.
@param[in] PayloadBufferSize Size in bytes of the payload data buffer.
@param[in] PayloadBuffer A pointer to a destination buffer to store the
security protocol command specific payload data
for the security protocol command.
@retval EFI_SUCCESS The security protocol command completed successfully.
@retval EFI_UNSUPPORTED The given DeviceIndex does not support security
protocol commands.
@retval EFI_DEVICE_ERROR The security protocol command completed with
an error.
@retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize
is non-zero.
@retval EFI_TIMEOUT A timeout occurred while waiting for the security
protocol command to execute.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_STORAGE_SECURITY_SEND_DATA)(
IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This,
IN UINTN DeviceIndex,
IN UINT64 Timeout,
IN UINT8 SecurityProtocolId,
IN UINT16 SecurityProtocolSpecificData,
IN UINTN PayloadBufferSize,
IN VOID *PayloadBuffer
);
//
// EDKII_PEI_STORAGE_SECURITY_CMD_PPI contains a set of services to send security
// protocol commands to a mass storage device. Two types of security protocol
// commands are supported. SendData sends a command with data to a device.
// ReceiveData sends a command that receives data and/or the result of one or
// more commands sent by SendData.
//
struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI {
UINT64 Revision;
EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES GetNumberofDevices;
EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH GetDevicePath;
EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA ReceiveData;
EDKII_PEI_STORAGE_SECURITY_SEND_DATA SendData;
};
extern EFI_GUID gEdkiiPeiStorageSecurityCommandPpiGuid;
#endif