ArmVirtPkg/ArmVirtQemuKernel.fdf

#
#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
#  Copyright (c) 2014, Linaro Limited. All rights reserved.
#  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
#
#  SPDX-License-Identifier: BSD-2-Clause-Patent
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[Defines]
!if $(FD_SIZE_IN_MB) == 2
  DEFINE FVMAIN_COMPACT_SIZE  = 0x1f8000
!endif
!if $(FD_SIZE_IN_MB) == 3
  DEFINE FVMAIN_COMPACT_SIZE  = 0x2f8000
!endif

[FD.QEMU_EFI]
BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM
Size          = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
ErasePolarity = 1

# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize     = 0x00001000
NumBlocks     = $(FD_NUM_BLOCKS)

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

#
# Implement the Linux kernel header layout so that the loader will identify
# it as something bootable, and execute it with a FDT pointer in x0 or r2.
# This area will be reused to store a copy of the FDT so round it up to 32 KB.
#
0x00000000|0x00008000
DATA = {
!if $(ARCH) == AARCH64
  0x01, 0x00, 0x00, 0x10,                         # code0: adr x1, .
  0xff, 0x1f, 0x00, 0x14,                         # code1: b 0x8000
  0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
!if $(FD_SIZE_IN_MB) == 2
  0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
!endif
!if $(FD_SIZE_IN_MB) == 3
  0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
!endif
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
  0x41, 0x52, 0x4d, 0x64,                         # magic: "ARM\x64"
  0x00, 0x00, 0x00, 0x00                          # res5
!else
  0x08, 0x10, 0x4f, 0xe2, # adr r1, .
  0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
  0x00, 0x00, 0xa0, 0xe1, # nop
  0x00, 0x00, 0xa0, 0xe1, # nop
  0x00, 0x00, 0xa0, 0xe1, # nop
  0x00, 0x00, 0xa0, 0xe1, # nop
  0x00, 0x00, 0xa0, 0xe1, # nop
  0x00, 0x00, 0xa0, 0xe1, # nop

  0xf6, 0x1f, 0x00, 0xea, # b 0x8000
  0x18, 0x28, 0x6f, 0x01, # magic
  0x00, 0x00, 0x00, 0x00, # start
!if $(FD_SIZE_IN_MB) == 2
  0x00, 0x00, 0x20, 0x00, # image size: 2 MB
!endif
!if $(FD_SIZE_IN_MB) == 3
  0x00, 0x00, 0x30, 0x00, # image size: 3 MB
!endif
  0x01, 0x02, 0x03, 0x04  # endiannness flag
!endif
}

0x00008000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT

!include VarStore.fdf.inc

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

!include ArmVirtQemuFvMain.fdf.inc

[FV.FVMAIN_COMPACT]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF RuleOverride = SELF_RELOC ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf

  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }

!include ArmVirtRules.fdf.inc