MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h

/** @file
  Header file for SdDxe Driver.

  This file defines common data structures, macro definitions and some module
  internal function header files.

  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef _SD_BLOCK_IO_H_
#define _SD_BLOCK_IO_H_

/**
  Reset the Block Device.

  @param  This                 Indicates a pointer to the calling context.
  @param  ExtendedVerification Driver may perform diagnostics on reset.

  @retval EFI_SUCCESS          The device was reset.
  @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
                               not be reset.

**/
EFI_STATUS
EFIAPI
SdReset (
  IN  EFI_BLOCK_IO_PROTOCOL  *This,
  IN  BOOLEAN                ExtendedVerification
  );

/**
  Read BufferSize bytes from Lba into Buffer.

  @param  This       Indicates a pointer to the calling context.
  @param  MediaId    Id of the media, changes every time the media is replaced.
  @param  Lba        The starting Logical Block Address to read from
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     A pointer to the destination buffer for the data. The caller is
                     responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS           The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdReadBlocks (
  IN     EFI_BLOCK_IO_PROTOCOL  *This,
  IN     UINT32                 MediaId,
  IN     EFI_LBA                Lba,
  IN     UINTN                  BufferSize,
  OUT VOID                      *Buffer
  );

/**
  Write BufferSize bytes from Lba into Buffer.

  @param  This       Indicates a pointer to the calling context.
  @param  MediaId    The media ID that the write request is for.
  @param  Lba        The starting logical block address to be written. The caller is
                     responsible for writing to only legitimate locations.
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     A pointer to the source buffer for the data.

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdWriteBlocks (
  IN  EFI_BLOCK_IO_PROTOCOL  *This,
  IN  UINT32                 MediaId,
  IN  EFI_LBA                Lba,
  IN  UINTN                  BufferSize,
  IN  VOID                   *Buffer
  );

/**
  Flush the Block Device.

  @param  This              Indicates a pointer to the calling context.

  @retval EFI_SUCCESS       All outstanding data was written to the device
  @retval EFI_DEVICE_ERROR  The device reported an error while writing back the data
  @retval EFI_NO_MEDIA      There is no media in the device.

**/
EFI_STATUS
EFIAPI
SdFlushBlocks (
  IN  EFI_BLOCK_IO_PROTOCOL  *This
  );

/**
  Reset the Block Device.

  @param[in]  This                 Indicates a pointer to the calling context.
  @param[in]  ExtendedVerification Driver may perform diagnostics on reset.

  @retval EFI_SUCCESS              The device was reset.
  @retval EFI_DEVICE_ERROR         The device is not functioning properly and could
                                   not be reset.

**/
EFI_STATUS
EFIAPI
SdResetEx (
  IN  EFI_BLOCK_IO2_PROTOCOL  *This,
  IN  BOOLEAN                 ExtendedVerification
  );

/**
  Read BufferSize bytes from Lba into Buffer.

  @param[in]       This         Indicates a pointer to the calling context.
  @param[in]       MediaId      Id of the media, changes every time the media is replaced.
  @param[in]       Lba          The starting Logical Block Address to read from.
  @param[in, out]  Token        A pointer to the token associated with the transaction.
  @param[in]       BufferSize   Size of Buffer, must be a multiple of device block size.
  @param[out]      Buffer       A pointer to the destination buffer for the data. The caller is
                                responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS           The read request was queued if Event is not NULL.
                                The data was read correctly from the device if
                                the Event is NULL.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing
                                the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId is not for the current media.
  @retval EFI_BAD_BUFFER_SIZE   The BufferSize parameter is not a multiple of the
                                intrinsic block size of the device.
  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack
                                of resources.

**/
EFI_STATUS
EFIAPI
SdReadBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL  *This,
  IN     UINT32                  MediaId,
  IN     EFI_LBA                 Lba,
  IN OUT EFI_BLOCK_IO2_TOKEN     *Token,
  IN     UINTN                   BufferSize,
  OUT VOID                       *Buffer
  );

/**
  Write BufferSize bytes from Lba into Buffer.

  @param[in]       This         Indicates a pointer to the calling context.
  @param[in]       MediaId      The media ID that the write request is for.
  @param[in]       Lba          The starting logical block address to be written. The
                                caller is responsible for writing to only legitimate
                                locations.
  @param[in, out]  Token        A pointer to the token associated with the transaction.
  @param[in]       BufferSize   Size of Buffer, must be a multiple of device block size.
  @param[in]       Buffer       A pointer to the source buffer for the data.

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdWriteBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL  *This,
  IN     UINT32                  MediaId,
  IN     EFI_LBA                 Lba,
  IN OUT EFI_BLOCK_IO2_TOKEN     *Token,
  IN     UINTN                   BufferSize,
  IN     VOID                    *Buffer
  );

/**
  Flush the Block Device.

  @param[in]       This     Indicates a pointer to the calling context.
  @param[in, out]  Token    A pointer to the token associated with the transaction.

  @retval EFI_SUCCESS       All outstanding data was written to the device
  @retval EFI_DEVICE_ERROR  The device reported an error while writing back the data
  @retval EFI_NO_MEDIA      There is no media in the device.

**/
EFI_STATUS
EFIAPI
SdFlushBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL  *This,
  IN OUT EFI_BLOCK_IO2_TOKEN     *Token
  );

/**
  Erase a specified number of device blocks.

  @param[in]       This           Indicates a pointer to the calling context.
  @param[in]       MediaId        The media ID that the erase request is for.
  @param[in]       Lba            The starting logical block address to be
                                  erased. The caller is responsible for erasing
                                  only legitimate locations.
  @param[in, out]  Token          A pointer to the token associated with the
                                  transaction.
  @param[in]       Size           The size in bytes to be erased. This must be
                                  a multiple of the physical block size of the
                                  device.

  @retval EFI_SUCCESS             The erase request was queued if Event is not
                                  NULL. The data was erased correctly to the
                                  device if the Event is NULL.to the device.
  @retval EFI_WRITE_PROTECTED     The device cannot be erased due to write
                                  protection.
  @retval EFI_DEVICE_ERROR        The device reported an error while attempting
                                  to perform the erase operation.
  @retval EFI_INVALID_PARAMETER   The erase request contains LBAs that are not
                                  valid.
  @retval EFI_NO_MEDIA            There is no media in the device.
  @retval EFI_MEDIA_CHANGED       The MediaId is not for the current media.

**/
EFI_STATUS
EFIAPI
SdEraseBlocks (
  IN     EFI_ERASE_BLOCK_PROTOCOL  *This,
  IN     UINT32                    MediaId,
  IN     EFI_LBA                   Lba,
  IN OUT EFI_ERASE_BLOCK_TOKEN     *Token,
  IN     UINTN                     Size
  );

#endif