/** @file | |
Produces a Firmware Management Protocol that supports updates to a firmware | |
image stored in a firmware device with platform and firmware device specific | |
information provided through PCDs and libraries. | |
Copyright (c) Microsoft Corporation.<BR> | |
Copyright (c) 2018 - 2021, Intel Corporation. All rights reserved.<BR> | |
SPDX-License-Identifier: BSD-2-Clause-Patent | |
**/ | |
#ifndef _FMP_DXE_H_ | |
#define _FMP_DXE_H_ | |
#include <PiDxe.h> | |
#include <Library/DebugLib.h> | |
#include <Library/BaseLib.h> | |
#include <Library/BaseMemoryLib.h> | |
#include <Library/BaseCryptLib.h> | |
#include <Library/PcdLib.h> | |
#include <Library/UefiBootServicesTableLib.h> | |
#include <Library/UefiRuntimeServicesTableLib.h> | |
#include <Library/MemoryAllocationLib.h> | |
#include <Library/UefiLib.h> | |
#include <Library/PrintLib.h> | |
#include <Library/FmpAuthenticationLib.h> | |
#include <Library/FmpDeviceLib.h> | |
#include <Library/FmpPayloadHeaderLib.h> | |
#include <Library/CapsuleUpdatePolicyLib.h> | |
#include <Library/FmpDependencyLib.h> | |
#include <Library/FmpDependencyCheckLib.h> | |
#include <Library/FmpDependencyDeviceLib.h> | |
#include <Protocol/FirmwareManagement.h> | |
#include <Protocol/FirmwareManagementProgress.h> | |
#include <Guid/SystemResourceTable.h> | |
#include <Guid/EventGroup.h> | |
#include <LastAttemptStatus.h> | |
#include <FmpLastAttemptStatus.h> | |
#include <Library/VariablePolicyHelperLib.h> | |
#define VERSION_STRING_NOT_SUPPORTED L"VERSION STRING NOT SUPPORTED" | |
#define VERSION_STRING_NOT_AVAILABLE L"VERSION STRING NOT AVAILABLE" | |
/// | |
/// | |
/// | |
#define FIRMWARE_MANAGEMENT_PRIVATE_DATA_SIGNATURE SIGNATURE_32 ('f','m','p','p') | |
typedef struct { | |
UINTN Signature; | |
EFI_HANDLE Handle; | |
EFI_FIRMWARE_MANAGEMENT_PROTOCOL Fmp; | |
BOOLEAN DescriptorPopulated; | |
EFI_FIRMWARE_IMAGE_DESCRIPTOR Descriptor; | |
CHAR16 *ImageIdName; | |
CHAR16 *VersionName; | |
BOOLEAN RuntimeVersionSupported; | |
EFI_EVENT FmpDeviceLockEvent; | |
// | |
// Indicates if an attempt has been made to lock a | |
// FLASH storage device by calling FmpDeviceLock(). | |
// A FLASH storage device may not support being locked, | |
// so this variable is set to TRUE even if FmpDeviceLock() | |
// returns an error. | |
// | |
BOOLEAN FmpDeviceLocked; | |
VOID *FmpDeviceContext; | |
CHAR16 *VersionVariableName; | |
CHAR16 *LsvVariableName; | |
CHAR16 *LastAttemptStatusVariableName; | |
CHAR16 *LastAttemptVersionVariableName; | |
CHAR16 *FmpStateVariableName; | |
BOOLEAN DependenciesSatisfied; | |
} FIRMWARE_MANAGEMENT_PRIVATE_DATA; | |
/// | |
/// | |
/// | |
#define FIRMWARE_MANAGEMENT_PRIVATE_DATA_FROM_THIS(a) \ | |
CR (a, FIRMWARE_MANAGEMENT_PRIVATE_DATA, Fmp, FIRMWARE_MANAGEMENT_PRIVATE_DATA_SIGNATURE) | |
/// | |
/// Null-terminated Unicode string retrieved from PcdFmpDeviceImageIdName. | |
/// | |
extern CHAR16 *mImageIdName; | |
/** | |
Check to see if any of the keys in PcdFmpDevicePkcs7CertBufferXdr matches | |
the test key. PcdFmpDeviceTestKeySha256Digest contains the SHA256 hash of | |
the test key. For each key in PcdFmpDevicePkcs7CertBufferXdr, compute the | |
SHA256 hash and compare it to PcdFmpDeviceTestKeySha256Digest. If the | |
SHA256 hash matches or there is then error computing the SHA256 hash, then | |
set PcdTestKeyUsed to TRUE. Skip this check if PcdTestKeyUsed is already | |
TRUE or PcdFmpDeviceTestKeySha256Digest is not exactly SHA256_DIGEST_SIZE | |
bytes. | |
**/ | |
VOID | |
DetectTestKey ( | |
VOID | |
); | |
/** | |
Returns information about the current firmware image(s) of the device. | |
This function allows a copy of the current firmware image to be created and saved. | |
The saved copy could later been used, for example, in firmware image recovery or rollback. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[in, out] ImageInfoSize A pointer to the size, in bytes, of the ImageInfo buffer. | |
On input, this is the size of the buffer allocated by the caller. | |
On output, it is the size of the buffer returned by the firmware | |
if the buffer was large enough, or the size of the buffer needed | |
to contain the image(s) information if the buffer was too small. | |
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s) | |
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs. | |
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number | |
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR. | |
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of | |
descriptors or firmware images within this device. | |
@param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes, | |
of an individual EFI_FIRMWARE_IMAGE_DESCRIPTOR. | |
@param[out] PackageVersion A version number that represents all the firmware images in the device. | |
The format is vendor specific and new version must have a greater value | |
than the old version. If PackageVersion is not supported, the value is | |
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version comparison | |
is to be performed using PackageVersionName. A value of 0xFFFFFFFD indicates | |
that package version update is in progress. | |
@param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing the | |
package version name. The buffer is allocated by this function with | |
AllocatePool(), and it is the caller's responsibility to free it with a call | |
to FreePool(). | |
@retval EFI_SUCCESS The device was successfully updated with the new image. | |
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size | |
needed to hold the image(s) information is returned in ImageInfoSize. | |
@retval EFI_INVALID_PARAMETER ImageInfoSize is NULL. | |
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetTheImageInfo ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
IN OUT UINTN *ImageInfoSize, | |
IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo, | |
OUT UINT32 *DescriptorVersion, | |
OUT UINT8 *DescriptorCount, | |
OUT UINTN *DescriptorSize, | |
OUT UINT32 *PackageVersion, | |
OUT CHAR16 **PackageVersionName | |
); | |
/** | |
Retrieves a copy of the current firmware image of the device. | |
This function allows a copy of the current firmware image to be created and saved. | |
The saved copy could later been used, for example, in firmware image recovery or rollback. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device. | |
The number is between 1 and DescriptorCount. | |
@param[in, out] Image Points to the buffer where the current image is copied to. | |
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes. | |
On return, points to the length of the image, in bytes. | |
@retval EFI_SUCCESS The device was successfully updated with the new image. | |
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the | |
image. The current buffer size needed to hold the image is returned | |
in ImageSize. | |
@retval EFI_INVALID_PARAMETER The Image was NULL. | |
@retval EFI_NOT_FOUND The current image is not copied to the buffer. | |
@retval EFI_UNSUPPORTED The operation is not supported. | |
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetTheImage ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
IN UINT8 ImageIndex, | |
IN OUT VOID *Image, | |
IN OUT UINTN *ImageSize | |
); | |
/** | |
Checks if the firmware image is valid for the device. | |
This function allows firmware update application to validate the firmware image without | |
invoking the SetImage() first. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device. | |
The number is between 1 and DescriptorCount. | |
@param[in] Image Points to the new image. | |
@param[in] ImageSize Size of the new image in bytes. | |
@param[out] ImageUpdatable Indicates if the new image is valid for update. It also provides, | |
if available, additional information if the image is invalid. | |
@retval EFI_SUCCESS The image was successfully checked. | |
@retval EFI_ABORTED The operation is aborted. | |
@retval EFI_INVALID_PARAMETER The Image was NULL. | |
@retval EFI_UNSUPPORTED The operation is not supported. | |
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
CheckTheImage ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
IN UINT8 ImageIndex, | |
IN CONST VOID *Image, | |
IN UINTN ImageSize, | |
OUT UINT32 *ImageUpdatable | |
); | |
/** | |
Updates the firmware image of the device. | |
This function updates the hardware with the new firmware image. | |
This function returns EFI_UNSUPPORTED if the firmware image is not updatable. | |
If the firmware image is updatable, the function should perform the following minimal validations | |
before proceeding to do the firmware image update. | |
- Validate the image authentication if image has attribute | |
IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED. The function returns | |
EFI_SECURITY_VIOLATION if the validation fails. | |
- Validate the image is a supported image for this device. The function returns EFI_ABORTED if | |
the image is unsupported. The function can optionally provide more detailed information on | |
why the image is not a supported image. | |
- Validate the data from VendorCode if not null. Image validation must be performed before | |
VendorCode data validation. VendorCode data is ignored or considered invalid if image | |
validation failed. The function returns EFI_ABORTED if the data is invalid. | |
VendorCode enables vendor to implement vendor-specific firmware image update policy. Null if | |
the caller did not specify the policy or use the default policy. As an example, vendor can implement | |
a policy to allow an option to force a firmware image update when the abort reason is due to the new | |
firmware image version is older than the current firmware image version or bad image checksum. | |
Sensitive operations such as those wiping the entire firmware image and render the device to be | |
non-functional should be encoded in the image itself rather than passed with the VendorCode. | |
AbortReason enables vendor to have the option to provide a more detailed description of the abort | |
reason to the caller. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device. | |
The number is between 1 and DescriptorCount. | |
@param[in] Image Points to the new image. | |
@param[in] ImageSize Size of the new image in bytes. | |
@param[in] VendorCode This enables vendor to implement vendor-specific firmware image update policy. | |
Null indicates the caller did not specify the policy or use the default policy. | |
@param[in] Progress A function used by the driver to report the progress of the firmware update. | |
@param[out] AbortReason A pointer to a pointer to a null-terminated string providing more | |
details for the aborted operation. The buffer is allocated by this function | |
with AllocatePool(), and it is the caller's responsibility to free it with a | |
call to FreePool(). | |
@retval EFI_SUCCESS The device was successfully updated with the new image. | |
@retval EFI_ABORTED The operation is aborted. | |
@retval EFI_INVALID_PARAMETER The Image was NULL. | |
@retval EFI_UNSUPPORTED The operation is not supported. | |
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SetTheImage ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
IN UINT8 ImageIndex, | |
IN CONST VOID *Image, | |
IN UINTN ImageSize, | |
IN CONST VOID *VendorCode, | |
IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress, | |
OUT CHAR16 **AbortReason | |
); | |
/** | |
Returns information about the firmware package. | |
This function returns package information. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[out] PackageVersion A version number that represents all the firmware images in the device. | |
The format is vendor specific and new version must have a greater value | |
than the old version. If PackageVersion is not supported, the value is | |
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version | |
comparison is to be performed using PackageVersionName. A value of | |
0xFFFFFFFD indicates that package version update is in progress. | |
@param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing | |
the package version name. The buffer is allocated by this function with | |
AllocatePool(), and it is the caller's responsibility to free it with a | |
call to FreePool(). | |
@param[out] PackageVersionNameMaxLen The maximum length of package version name if device supports update of | |
package version name. A value of 0 indicates the device does not support | |
update of package version name. Length is the number of Unicode characters, | |
including the terminating null character. | |
@param[out] AttributesSupported Package attributes that are supported by this device. See 'Package Attribute | |
Definitions' for possible returned values of this parameter. A value of 1 | |
indicates the attribute is supported and the current setting value is | |
indicated in AttributesSetting. A value of 0 indicates the attribute is not | |
supported and the current setting value in AttributesSetting is meaningless. | |
@param[out] AttributesSetting Package attributes. See 'Package Attribute Definitions' for possible returned | |
values of this parameter | |
@retval EFI_SUCCESS The package information was successfully returned. | |
@retval EFI_UNSUPPORTED The operation is not supported. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
GetPackageInfo ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
OUT UINT32 *PackageVersion, | |
OUT CHAR16 **PackageVersionName, | |
OUT UINT32 *PackageVersionNameMaxLen, | |
OUT UINT64 *AttributesSupported, | |
OUT UINT64 *AttributesSetting | |
); | |
/** | |
Updates information about the firmware package. | |
This function updates package information. | |
This function returns EFI_UNSUPPORTED if the package information is not updatable. | |
VendorCode enables vendor to implement vendor-specific package information update policy. | |
Null if the caller did not specify this policy or use the default policy. | |
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. | |
@param[in] Image Points to the authentication image. | |
Null if authentication is not required. | |
@param[in] ImageSize Size of the authentication image in bytes. | |
0 if authentication is not required. | |
@param[in] VendorCode This enables vendor to implement vendor-specific firmware | |
image update policy. | |
Null indicates the caller did not specify this policy or use | |
the default policy. | |
@param[in] PackageVersion The new package version. | |
@param[in] PackageVersionName A pointer to the new null-terminated Unicode string representing | |
the package version name. | |
The string length is equal to or less than the value returned in | |
PackageVersionNameMaxLen. | |
@retval EFI_SUCCESS The device was successfully updated with the new package | |
information. | |
@retval EFI_INVALID_PARAMETER The PackageVersionName length is longer than the value | |
returned in PackageVersionNameMaxLen. | |
@retval EFI_UNSUPPORTED The operation is not supported. | |
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SetPackageInfo ( | |
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, | |
IN CONST VOID *Image, | |
IN UINTN ImageSize, | |
IN CONST VOID *VendorCode, | |
IN UINT32 PackageVersion, | |
IN CONST CHAR16 *PackageVersionName | |
); | |
#endif |