| /** @file | |
| MP initialize support functions for PEI phase. | |
| Copyright (c) 2016 - 2020, Intel Corporation. All rights reserved.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #include "MpLib.h" | |
| #include <Library/PeiServicesLib.h> | |
| #include <Guid/S3SmmInitDone.h> | |
| #include <Ppi/ShadowMicrocode.h> | |
| STATIC UINT64 mSevEsPeiWakeupBuffer = BASE_1MB; | |
| /** | |
| S3 SMM Init Done notification function. | |
| @param PeiServices Indirect reference to the PEI Services Table. | |
| @param NotifyDesc Address of the notification descriptor data structure. | |
| @param InvokePpi Address of the PPI that was invoked. | |
| @retval EFI_SUCCESS The function completes successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| NotifyOnS3SmmInitDonePpi ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc, | |
| IN VOID *InvokePpi | |
| ); | |
| // | |
| // Global function | |
| // | |
| EFI_PEI_NOTIFY_DESCRIPTOR mS3SmmInitDoneNotifyDesc = { | |
| EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST, | |
| &gEdkiiS3SmmInitDoneGuid, | |
| NotifyOnS3SmmInitDonePpi | |
| }; | |
| /** | |
| S3 SMM Init Done notification function. | |
| @param PeiServices Indirect reference to the PEI Services Table. | |
| @param NotifyDesc Address of the notification descriptor data structure. | |
| @param InvokePpi Address of the PPI that was invoked. | |
| @retval EFI_SUCCESS The function completes successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| NotifyOnS3SmmInitDonePpi ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc, | |
| IN VOID *InvokePpi | |
| ) | |
| { | |
| CPU_MP_DATA *CpuMpData; | |
| CpuMpData = GetCpuMpData (); | |
| // | |
| // PiSmmCpuDxeSmm driver hardcode change the loop mode to HLT mode. | |
| // So in this notify function, code need to check the current loop | |
| // mode, if it is not HLT mode, code need to change loop mode back | |
| // to the original mode. | |
| // | |
| if (CpuMpData->ApLoopMode != ApInHltLoop) { | |
| CpuMpData->WakeUpByInitSipiSipi = TRUE; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Enable Debug Agent to support source debugging on AP function. | |
| **/ | |
| VOID | |
| EnableDebugAgent ( | |
| VOID | |
| ) | |
| { | |
| } | |
| /** | |
| Get pointer to CPU MP Data structure. | |
| For BSP, the pointer is retrieved from HOB. | |
| For AP, the structure is stored in the top of each AP's stack. | |
| @return The pointer to CPU MP Data structure. | |
| **/ | |
| CPU_MP_DATA * | |
| GetCpuMpData ( | |
| VOID | |
| ) | |
| { | |
| CPU_MP_DATA *CpuMpData; | |
| MSR_IA32_APIC_BASE_REGISTER ApicBaseMsr; | |
| UINTN ApTopOfStack; | |
| AP_STACK_DATA *ApStackData; | |
| ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE); | |
| if (ApicBaseMsr.Bits.BSP == 1) { | |
| CpuMpData = GetCpuMpDataFromGuidedHob (); | |
| ASSERT (CpuMpData != NULL); | |
| } else { | |
| ApTopOfStack = ALIGN_VALUE ((UINTN)&ApTopOfStack, (UINTN)PcdGet32 (PcdCpuApStackSize)); | |
| ApStackData = (AP_STACK_DATA *)((UINTN)ApTopOfStack- sizeof (AP_STACK_DATA)); | |
| CpuMpData = (CPU_MP_DATA *)ApStackData->MpData; | |
| } | |
| return CpuMpData; | |
| } | |
| /** | |
| Save the pointer to CPU MP Data structure. | |
| @param[in] CpuMpData The pointer to CPU MP Data structure will be saved. | |
| **/ | |
| VOID | |
| SaveCpuMpData ( | |
| IN CPU_MP_DATA *CpuMpData | |
| ) | |
| { | |
| UINT64 Data64; | |
| UINTN Index; | |
| CPU_INFO_IN_HOB *CpuInfoInHob; | |
| MP_HAND_OFF *MpHandOff; | |
| UINTN MpHandOffSize; | |
| // | |
| // When APs are in a state that can be waken up by a store operation to a memory address, | |
| // report the MP_HAND_OFF data for DXE to use. | |
| // | |
| CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob; | |
| MpHandOffSize = sizeof (MP_HAND_OFF) + sizeof (PROCESSOR_HAND_OFF) * CpuMpData->CpuCount; | |
| MpHandOff = (MP_HAND_OFF *)BuildGuidHob (&mMpHandOffGuid, MpHandOffSize); | |
| ASSERT (MpHandOff != NULL); | |
| ZeroMem (MpHandOff, MpHandOffSize); | |
| MpHandOff->ProcessorIndex = 0; | |
| MpHandOff->CpuCount = CpuMpData->CpuCount; | |
| if (CpuMpData->ApLoopMode != ApInHltLoop) { | |
| MpHandOff->StartupSignalValue = MP_HAND_OFF_SIGNAL; | |
| MpHandOff->WaitLoopExecutionMode = sizeof (VOID *); | |
| } | |
| for (Index = 0; Index < MpHandOff->CpuCount; Index++) { | |
| MpHandOff->Info[Index].ApicId = CpuInfoInHob[Index].ApicId; | |
| MpHandOff->Info[Index].Health = CpuInfoInHob[Index].Health; | |
| if (CpuMpData->ApLoopMode != ApInHltLoop) { | |
| MpHandOff->Info[Index].StartupSignalAddress = (UINT64)(UINTN)CpuMpData->CpuData[Index].StartupApSignal; | |
| MpHandOff->Info[Index].StartupProcedureAddress = (UINT64)(UINTN)&CpuMpData->CpuData[Index].ApFunction; | |
| } | |
| } | |
| // | |
| // Build location of CPU MP DATA buffer in HOB | |
| // | |
| Data64 = (UINT64)(UINTN)CpuMpData; | |
| BuildGuidDataHob ( | |
| &mCpuInitMpLibHobGuid, | |
| (VOID *)&Data64, | |
| sizeof (UINT64) | |
| ); | |
| } | |
| /** | |
| Check if AP wakeup buffer is overlapped with existing allocated buffer. | |
| @param[in] WakeupBufferStart AP wakeup buffer start address. | |
| @param[in] WakeupBufferEnd AP wakeup buffer end address. | |
| @retval TRUE There is overlap. | |
| @retval FALSE There is no overlap. | |
| **/ | |
| BOOLEAN | |
| CheckOverlapWithAllocatedBuffer ( | |
| IN UINT64 WakeupBufferStart, | |
| IN UINT64 WakeupBufferEnd | |
| ) | |
| { | |
| EFI_PEI_HOB_POINTERS Hob; | |
| EFI_HOB_MEMORY_ALLOCATION *MemoryHob; | |
| BOOLEAN Overlapped; | |
| UINT64 MemoryStart; | |
| UINT64 MemoryEnd; | |
| Overlapped = FALSE; | |
| // | |
| // Get the HOB list for processing | |
| // | |
| Hob.Raw = GetHobList (); | |
| // | |
| // Collect memory ranges | |
| // | |
| while (!END_OF_HOB_LIST (Hob)) { | |
| if (Hob.Header->HobType == EFI_HOB_TYPE_MEMORY_ALLOCATION) { | |
| MemoryHob = Hob.MemoryAllocation; | |
| MemoryStart = MemoryHob->AllocDescriptor.MemoryBaseAddress; | |
| MemoryEnd = MemoryHob->AllocDescriptor.MemoryBaseAddress + MemoryHob->AllocDescriptor.MemoryLength; | |
| if (!((WakeupBufferStart >= MemoryEnd) || (WakeupBufferEnd <= MemoryStart))) { | |
| Overlapped = TRUE; | |
| break; | |
| } | |
| } | |
| Hob.Raw = GET_NEXT_HOB (Hob); | |
| } | |
| return Overlapped; | |
| } | |
| /** | |
| Get available system memory below 1MB by specified size. | |
| @param[in] WakeupBufferSize Wakeup buffer size required | |
| @retval other Return wakeup buffer address below 1MB. | |
| @retval -1 Cannot find free memory below 1MB. | |
| **/ | |
| UINTN | |
| GetWakeupBuffer ( | |
| IN UINTN WakeupBufferSize | |
| ) | |
| { | |
| EFI_PEI_HOB_POINTERS Hob; | |
| UINT64 WakeupBufferStart; | |
| UINT64 WakeupBufferEnd; | |
| WakeupBufferSize = (WakeupBufferSize + SIZE_4KB - 1) & ~(SIZE_4KB - 1); | |
| // | |
| // Get the HOB list for processing | |
| // | |
| Hob.Raw = GetHobList (); | |
| // | |
| // Collect memory ranges | |
| // | |
| while (!END_OF_HOB_LIST (Hob)) { | |
| if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) { | |
| if ((Hob.ResourceDescriptor->PhysicalStart < BASE_1MB) && | |
| (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) && | |
| ((Hob.ResourceDescriptor->ResourceAttribute & | |
| (EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED | | |
| EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED | | |
| EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED | |
| )) == 0) | |
| ) | |
| { | |
| // | |
| // Need memory under 1MB to be collected here | |
| // | |
| WakeupBufferEnd = Hob.ResourceDescriptor->PhysicalStart + Hob.ResourceDescriptor->ResourceLength; | |
| if (ConfidentialComputingGuestHas (CCAttrAmdSevEs) && | |
| (WakeupBufferEnd > mSevEsPeiWakeupBuffer)) | |
| { | |
| // | |
| // SEV-ES Wakeup buffer should be under 1MB and under any previous one | |
| // | |
| WakeupBufferEnd = mSevEsPeiWakeupBuffer; | |
| } else if (WakeupBufferEnd > BASE_1MB) { | |
| // | |
| // Wakeup buffer should be under 1MB | |
| // | |
| WakeupBufferEnd = BASE_1MB; | |
| } | |
| while (WakeupBufferEnd > WakeupBufferSize) { | |
| // | |
| // Wakeup buffer should be aligned on 4KB | |
| // | |
| WakeupBufferStart = (WakeupBufferEnd - WakeupBufferSize) & ~(SIZE_4KB - 1); | |
| if (WakeupBufferStart < Hob.ResourceDescriptor->PhysicalStart) { | |
| break; | |
| } | |
| if (CheckOverlapWithAllocatedBuffer (WakeupBufferStart, WakeupBufferEnd)) { | |
| // | |
| // If this range is overlapped with existing allocated buffer, skip it | |
| // and find the next range | |
| // | |
| WakeupBufferEnd -= WakeupBufferSize; | |
| continue; | |
| } | |
| DEBUG (( | |
| DEBUG_INFO, | |
| "WakeupBufferStart = %x, WakeupBufferSize = %x\n", | |
| WakeupBufferStart, | |
| WakeupBufferSize | |
| )); | |
| if (ConfidentialComputingGuestHas (CCAttrAmdSevEs)) { | |
| // | |
| // Next SEV-ES wakeup buffer allocation must be below this | |
| // allocation | |
| // | |
| mSevEsPeiWakeupBuffer = WakeupBufferStart; | |
| } | |
| return (UINTN)WakeupBufferStart; | |
| } | |
| } | |
| } | |
| // | |
| // Find the next HOB | |
| // | |
| Hob.Raw = GET_NEXT_HOB (Hob); | |
| } | |
| return (UINTN)-1; | |
| } | |
| /** | |
| Get available EfiBootServicesCode memory below 4GB by specified size. | |
| This buffer is required to safely transfer AP from real address mode to | |
| protected mode or long mode, due to the fact that the buffer returned by | |
| GetWakeupBuffer() may be marked as non-executable. | |
| @param[in] BufferSize Wakeup transition buffer size. | |
| @retval other Return wakeup transition buffer address below 4GB. | |
| @retval 0 Cannot find free memory below 4GB. | |
| **/ | |
| UINTN | |
| AllocateCodeBuffer ( | |
| IN UINTN BufferSize | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_PHYSICAL_ADDRESS Address; | |
| Status = PeiServicesAllocatePages (EfiBootServicesCode, EFI_SIZE_TO_PAGES (BufferSize), &Address); | |
| if (EFI_ERROR (Status)) { | |
| Address = 0; | |
| } | |
| return (UINTN)Address; | |
| } | |
| /** | |
| Return the address of the SEV-ES AP jump table. | |
| This buffer is required in order for an SEV-ES guest to transition from | |
| UEFI into an OS. | |
| @return Return SEV-ES AP jump table buffer | |
| **/ | |
| UINTN | |
| GetSevEsAPMemory ( | |
| VOID | |
| ) | |
| { | |
| // | |
| // PEI phase doesn't need to do such transition. So simply return 0. | |
| // | |
| return 0; | |
| } | |
| /** | |
| Checks APs status and updates APs status if needed. | |
| **/ | |
| VOID | |
| CheckAndUpdateApsStatus ( | |
| VOID | |
| ) | |
| { | |
| } | |
| /** | |
| Build the microcode patch HOB that contains the base address and size of the | |
| microcode patch stored in the memory. | |
| @param[in] CpuMpData Pointer to the CPU_MP_DATA structure. | |
| **/ | |
| VOID | |
| BuildMicrocodeCacheHob ( | |
| IN CPU_MP_DATA *CpuMpData | |
| ) | |
| { | |
| EDKII_MICROCODE_PATCH_HOB *MicrocodeHob; | |
| UINTN HobDataLength; | |
| UINT32 Index; | |
| HobDataLength = sizeof (EDKII_MICROCODE_PATCH_HOB) + | |
| sizeof (UINT64) * CpuMpData->CpuCount; | |
| MicrocodeHob = AllocatePool (HobDataLength); | |
| if (MicrocodeHob == NULL) { | |
| ASSERT (FALSE); | |
| return; | |
| } | |
| // | |
| // Store the information of the memory region that holds the microcode patches. | |
| // | |
| MicrocodeHob->MicrocodePatchAddress = CpuMpData->MicrocodePatchAddress; | |
| MicrocodeHob->MicrocodePatchRegionSize = CpuMpData->MicrocodePatchRegionSize; | |
| // | |
| // Store the detected microcode patch for each processor as well. | |
| // | |
| MicrocodeHob->ProcessorCount = CpuMpData->CpuCount; | |
| for (Index = 0; Index < CpuMpData->CpuCount; Index++) { | |
| if (CpuMpData->CpuData[Index].MicrocodeEntryAddr != 0) { | |
| MicrocodeHob->ProcessorSpecificPatchOffset[Index] = | |
| CpuMpData->CpuData[Index].MicrocodeEntryAddr - CpuMpData->MicrocodePatchAddress; | |
| } else { | |
| MicrocodeHob->ProcessorSpecificPatchOffset[Index] = MAX_UINT64; | |
| } | |
| } | |
| BuildGuidDataHob ( | |
| &gEdkiiMicrocodePatchHobGuid, | |
| MicrocodeHob, | |
| HobDataLength | |
| ); | |
| return; | |
| } | |
| /** | |
| Initialize global data for MP support. | |
| @param[in] CpuMpData The pointer to CPU MP Data structure. | |
| **/ | |
| VOID | |
| InitMpGlobalData ( | |
| IN CPU_MP_DATA *CpuMpData | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| BuildMicrocodeCacheHob (CpuMpData); | |
| SaveCpuMpData (CpuMpData); | |
| /// | |
| /// Install Notify | |
| /// | |
| Status = PeiServicesNotifyPpi (&mS3SmmInitDoneNotifyDesc); | |
| ASSERT_EFI_ERROR (Status); | |
| } | |
| /** | |
| This service executes a caller provided function on all enabled APs. | |
| @param[in] Procedure A pointer to the function to be run on | |
| enabled APs of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] SingleThread If TRUE, then all the enabled APs execute | |
| the function specified by Procedure one by | |
| one, in ascending order of processor handle | |
| number. If FALSE, then all the enabled APs | |
| execute the function specified by Procedure | |
| simultaneously. | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until all APs finish | |
| or TimeoutInMicroSeconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on all the enabled | |
| APs, and go on executing immediately. If | |
| all return from Procedure, or TimeoutInMicroSeconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for | |
| APs to return from Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| all APs return from Procedure, then Procedure | |
| on the failed APs is terminated. All enabled | |
| APs are available for next function assigned | |
| by MpInitLibStartupAllAPs() or | |
| MPInitLibStartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure for | |
| all APs. | |
| @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise, | |
| if all APs finish successfully, then its | |
| content is set to NULL. If not all APs | |
| finish before timeout expires, then its | |
| content is set to address of the buffer | |
| holding handle numbers of the failed APs. | |
| The buffer is allocated by MP Initialization | |
| library, and it's the caller's responsibility to | |
| free the buffer with FreePool() service. | |
| In blocking mode, it is ready for consumption | |
| when the call returns. In non-blocking mode, | |
| it is ready when WaitEvent is signaled. The | |
| list of failed CPU is terminated by | |
| END_OF_CPU_LIST. | |
| @retval EFI_SUCCESS In blocking mode, all APs have finished before | |
| the timeout expired. | |
| @retval EFI_SUCCESS In non-blocking mode, function has been dispatched | |
| to all enabled APs. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not | |
| supported. | |
| @retval EFI_DEVICE_ERROR Caller processor is AP. | |
| @retval EFI_NOT_STARTED No enabled APs exist in the system. | |
| @retval EFI_NOT_READY Any enabled APs are busy. | |
| @retval EFI_NOT_READY MP Initialize Library is not initialized. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| all enabled APs have finished. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| MpInitLibStartupAllAPs ( | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN BOOLEAN SingleThread, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT UINTN **FailedCpuList OPTIONAL | |
| ) | |
| { | |
| if (WaitEvent != NULL) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| return StartupAllCPUsWorker ( | |
| Procedure, | |
| SingleThread, | |
| TRUE, | |
| NULL, | |
| TimeoutInMicroseconds, | |
| ProcedureArgument, | |
| FailedCpuList | |
| ); | |
| } | |
| /** | |
| This service lets the caller get one enabled AP to execute a caller-provided | |
| function. | |
| @param[in] Procedure A pointer to the function to be run on the | |
| designated AP of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is | |
| from 0 to the total number of logical | |
| processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| MpInitLibGetNumberOfProcessors(). | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until this AP finish | |
| or TimeoutInMicroSeconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on this AP, | |
| and go on executing immediately. If this AP | |
| return from Procedure or TimeoutInMicroSeconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for | |
| this AP to finish this Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| this AP returns from Procedure, then Procedure | |
| on the AP is terminated. The | |
| AP is available for next function assigned | |
| by MpInitLibStartupAllAPs() or | |
| MpInitLibStartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure on the | |
| specified AP. | |
| @param[out] Finished If NULL, this parameter is ignored. In | |
| blocking mode, this parameter is ignored. | |
| In non-blocking mode, if AP returns from | |
| Procedure before the timeout expires, its | |
| content is set to TRUE. Otherwise, the | |
| value is set to FALSE. The caller can | |
| determine if the AP returned from Procedure | |
| by evaluating this value. | |
| @retval EFI_SUCCESS In blocking mode, specified AP finished before | |
| the timeout expires. | |
| @retval EFI_SUCCESS In non-blocking mode, the function has been | |
| dispatched to specified AP. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not | |
| supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| the specified AP has finished. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| @retval EFI_NOT_READY MP Initialize Library is not initialized. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| MpInitLibStartupThisAP ( | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN UINTN ProcessorNumber, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT BOOLEAN *Finished OPTIONAL | |
| ) | |
| { | |
| if (WaitEvent != NULL) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| return StartupThisAPWorker ( | |
| Procedure, | |
| ProcessorNumber, | |
| NULL, | |
| TimeoutInMicroseconds, | |
| ProcedureArgument, | |
| Finished | |
| ); | |
| } | |
| /** | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. This call can only be performed | |
| by the current BSP. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| MpInitLibGetNumberOfProcessors(). | |
| @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an | |
| enabled AP. Otherwise, it will be disabled. | |
| @retval EFI_SUCCESS BSP successfully switched. | |
| @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to | |
| this service returning. | |
| @retval EFI_UNSUPPORTED Switching the BSP is not supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or | |
| a disabled AP. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| @retval EFI_NOT_READY MP Initialize Library is not initialized. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| MpInitLibSwitchBSP ( | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableOldBSP | |
| ) | |
| { | |
| return SwitchBSPWorker (ProcessorNumber, EnableOldBSP); | |
| } | |
| /** | |
| This service lets the caller enable or disable an AP from this point onward. | |
| This service may only be called from the BSP. | |
| @param[in] ProcessorNumber The handle number of AP. | |
| The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| MpInitLibGetNumberOfProcessors(). | |
| @param[in] EnableAP Specifies the new state for the processor for | |
| enabled, FALSE for disabled. | |
| @param[in] HealthFlag If not NULL, a pointer to a value that specifies | |
| the new health status of the AP. This flag | |
| corresponds to StatusFlag defined in | |
| EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only | |
| the PROCESSOR_HEALTH_STATUS_BIT is used. All other | |
| bits are ignored. If it is NULL, this parameter | |
| is ignored. | |
| @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed | |
| prior to this service returning. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber | |
| does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. | |
| @retval EFI_NOT_READY MP Initialize Library is not initialized. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| MpInitLibEnableDisableAP ( | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableAP, | |
| IN UINT32 *HealthFlag OPTIONAL | |
| ) | |
| { | |
| return EnableDisableApWorker (ProcessorNumber, EnableAP, HealthFlag); | |
| } | |
| /** | |
| This funtion will try to invoke platform specific microcode shadow logic to | |
| relocate microcode update patches into memory. | |
| @param[in, out] CpuMpData The pointer to CPU MP Data structure. | |
| @retval EFI_SUCCESS Shadow microcode success. | |
| @retval EFI_OUT_OF_RESOURCES No enough resource to complete the operation. | |
| @retval EFI_UNSUPPORTED Can't find platform specific microcode shadow | |
| PPI/Protocol. | |
| **/ | |
| EFI_STATUS | |
| PlatformShadowMicrocode ( | |
| IN OUT CPU_MP_DATA *CpuMpData | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EDKII_PEI_SHADOW_MICROCODE_PPI *ShadowMicrocodePpi; | |
| UINTN CpuCount; | |
| EDKII_PEI_MICROCODE_CPU_ID *MicrocodeCpuId; | |
| UINTN Index; | |
| UINTN BufferSize; | |
| VOID *Buffer; | |
| Status = PeiServicesLocatePpi ( | |
| &gEdkiiPeiShadowMicrocodePpiGuid, | |
| 0, | |
| NULL, | |
| (VOID **)&ShadowMicrocodePpi | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| CpuCount = CpuMpData->CpuCount; | |
| MicrocodeCpuId = (EDKII_PEI_MICROCODE_CPU_ID *)AllocateZeroPool (sizeof (EDKII_PEI_MICROCODE_CPU_ID) * CpuCount); | |
| if (MicrocodeCpuId == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| for (Index = 0; Index < CpuMpData->CpuCount; Index++) { | |
| MicrocodeCpuId[Index].ProcessorSignature = CpuMpData->CpuData[Index].ProcessorSignature; | |
| MicrocodeCpuId[Index].PlatformId = CpuMpData->CpuData[Index].PlatformId; | |
| } | |
| Status = ShadowMicrocodePpi->ShadowMicrocode ( | |
| ShadowMicrocodePpi, | |
| CpuCount, | |
| MicrocodeCpuId, | |
| &BufferSize, | |
| &Buffer | |
| ); | |
| FreePool (MicrocodeCpuId); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_NOT_FOUND; | |
| } | |
| CpuMpData->MicrocodePatchAddress = (UINTN)Buffer; | |
| CpuMpData->MicrocodePatchRegionSize = BufferSize; | |
| DEBUG (( | |
| DEBUG_INFO, | |
| "%a: Required microcode patches have been loaded at 0x%lx, with size 0x%lx.\n", | |
| __func__, | |
| CpuMpData->MicrocodePatchAddress, | |
| CpuMpData->MicrocodePatchRegionSize | |
| )); | |
| return EFI_SUCCESS; | |
| } |