| /** @file | |
| The SioBusDxe driver is used to create child devices on the ISA bus and | |
| installs the Super I/O protocols on them. | |
| Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #include "SioBusDxe.h" | |
| // | |
| // SioBus Driver Binding Protocol | |
| // | |
| EFI_DRIVER_BINDING_PROTOCOL gSioBusDriverBinding = { | |
| SioBusDriverBindingSupported, | |
| SioBusDriverBindingStart, | |
| SioBusDriverBindingStop, | |
| 0x10, | |
| NULL, | |
| NULL | |
| }; | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is | |
| provided, it further tests to see if this driver supports creating a handle | |
| for the specified child device. | |
| This function checks to see if the driver specified by This supports the | |
| device specified by ControllerHandle. Drivers will typically use the device | |
| path attached to ControllerHandle and/or the services from the bus I/O | |
| abstraction attached to ControllerHandle to determine if the driver supports | |
| ControllerHandle. This function may be called many times during platform | |
| initialization. In order to reduce boot times, the tests performed by this | |
| function must be very small, and take as little time as possible to execute. | |
| This function must not change the state of any hardware devices, and this | |
| function must be aware that the device specified by ControllerHandle may | |
| already be managed by the same driver or a different driver. This function | |
| must match its calls to AllocatePages() with FreePages(), AllocatePool() with | |
| FreePool(), and OpenProtocol() with CloseProtocol(). Since ControllerHandle | |
| may have been previously started by the same driver, if a protocol is already | |
| in the opened state, then it must not be closed with CloseProtocol(). This is | |
| required to guarantee the state of ControllerHandle is not modified by this | |
| function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL | |
| instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This | |
| handle must support a protocol interface | |
| that supplies an I/O abstraction to the | |
| driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a | |
| device path. This parameter is ignored by | |
| device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter | |
| is not NULL, then the bus driver must | |
| determine if the bus controller specified by | |
| ControllerHandle and the child controller | |
| specified by RemainingDevicePath are both | |
| supported by this bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the | |
| driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed | |
| by the driver specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed | |
| by a different driver or an application that | |
| requires exclusive access. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the | |
| driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SioBusDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| PCI_TYPE00 Pci; | |
| UINTN SegmentNumber; | |
| UINTN BusNumber; | |
| UINTN DeviceNumber; | |
| UINTN FunctionNumber; | |
| // | |
| // Get PciIo protocol instance | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| (VOID **)&PciIo, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = PciIo->Pci.Read ( | |
| PciIo, | |
| EfiPciIoWidthUint32, | |
| 0, | |
| sizeof (Pci) / sizeof (UINT32), | |
| &Pci | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| Status = EFI_UNSUPPORTED; | |
| if ((Pci.Hdr.Command & 0x03) == 0x03) { | |
| if (Pci.Hdr.ClassCode[2] == PCI_CLASS_BRIDGE) { | |
| // | |
| // See if this is a standard PCI to ISA Bridge from the Base Code and | |
| // Class Code | |
| // | |
| if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA) { | |
| Status = EFI_SUCCESS; | |
| } | |
| // | |
| // See if this is an Intel PCI to ISA bridge in Positive Decode Mode | |
| // | |
| if ((Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA_PDECODE) && | |
| (Pci.Hdr.VendorId == 0x8086)) | |
| { | |
| // | |
| // See if this is on Function #0 to avoid false positives on | |
| // PCI_CLASS_BRIDGE_OTHER that has the same value as | |
| // PCI_CLASS_BRIDGE_ISA_PDECODE | |
| // | |
| Status = PciIo->GetLocation ( | |
| PciIo, | |
| &SegmentNumber, | |
| &BusNumber, | |
| &DeviceNumber, | |
| &FunctionNumber | |
| ); | |
| if (!EFI_ERROR (Status) && (FunctionNumber == 0)) { | |
| Status = EFI_SUCCESS; | |
| } else { | |
| Status = EFI_UNSUPPORTED; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| return Status; | |
| } | |
| /** | |
| Starts a device controller or a bus controller. | |
| The Start() function is designed to be invoked from the EFI boot service | |
| ConnectController(). As a result, much of the error checking on the | |
| parameters to Start() has been moved into this common boot service. It is | |
| legal to call Start() from other locations, but the following calling | |
| restrictions must be followed or the system behavior will not be | |
| deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE. | |
| 2. If RemainingDevicePath is not NULL, then it must be a pointer to a | |
| naturally aligned EFI_DEVICE_PATH_PROTOCOL. | |
| 3. Prior to calling Start(), the Supported() function for the driver | |
| specified by This must have been called with the same calling parameters, | |
| and Supported() must have returned EFI_SUCCESS. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL | |
| instance. | |
| @param[in] ControllerHandle The handle of the controller to start. This | |
| handle must support a protocol interface | |
| that supplies an I/O abstraction to the | |
| driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a | |
| device path. This parameter is ignored by | |
| device drivers, and is optional for bus | |
| drivers. For a bus driver, if this parameter | |
| is NULL, then handles for all the children | |
| of Controller are created by this driver. If | |
| this parameter is not NULL and the first | |
| Device Path Node is not the End of Device | |
| Path Node, then only the handle for the | |
| child device specified by the first Device | |
| Path Node of RemainingDevicePath is created | |
| by this driver. If the first Device Path | |
| Node of RemainingDevicePath is the End of | |
| Device Path Node, no child handle is created | |
| by this driver. | |
| @retval EFI_SUCCESS The device was started. | |
| @retval EFI_DEVICE_ERROR The device could not be started due to a | |
| device error. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a | |
| lack of resources. | |
| @retval Others The driver failded to start the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SioBusDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| UINT64 Supports; | |
| UINT64 OriginalAttributes; | |
| UINT64 Attributes; | |
| BOOLEAN Enabled; | |
| SIO_BUS_DRIVER_PRIVATE_DATA *Private; | |
| UINT32 ChildDeviceNumber; | |
| Enabled = FALSE; | |
| Supports = 0; | |
| OriginalAttributes = 0; | |
| Private = NULL; | |
| // | |
| // Open the PCI I/O Protocol Interface | |
| // | |
| PciIo = NULL; | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| (VOID **)&PciIo, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Open Device Path Protocol | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **)&ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| return Status; | |
| } | |
| // | |
| // Get supported PCI attributes | |
| // | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationSupported, | |
| 0, | |
| &Supports | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Supports &= (UINT64)(EFI_PCI_IO_ATTRIBUTE_ISA_IO | | |
| EFI_PCI_IO_ATTRIBUTE_ISA_IO_16); | |
| if ((Supports == 0) || | |
| (Supports == (EFI_PCI_IO_ATTRIBUTE_ISA_IO | | |
| EFI_PCI_IO_ATTRIBUTE_ISA_IO_16))) | |
| { | |
| Status = EFI_UNSUPPORTED; | |
| goto Done; | |
| } | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationGet, | |
| 0, | |
| &OriginalAttributes | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Attributes = EFI_PCI_DEVICE_ENABLE | | |
| Supports | | |
| EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO; | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationEnable, | |
| Attributes, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Enabled = TRUE; | |
| // | |
| // Store the OriginalAttributes for the restore in BindingStop() | |
| // | |
| Private = AllocateZeroPool (sizeof (SIO_BUS_DRIVER_PRIVATE_DATA)); | |
| if (Private == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Done; | |
| } | |
| Private->PciIo = PciIo; | |
| Private->OriginalAttributes = OriginalAttributes; | |
| Status = gBS->InstallProtocolInterface ( | |
| &Controller, | |
| &gEfiCallerIdGuid, | |
| EFI_NATIVE_INTERFACE, | |
| Private | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| // | |
| // Report status code for the start of general controller initialization | |
| // | |
| REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
| EFI_PROGRESS_CODE, | |
| (EFI_IO_BUS_LPC | EFI_IOB_PC_INIT), | |
| ParentDevicePath | |
| ); | |
| // | |
| // Report status code for the start of enabling devices on the bus | |
| // | |
| REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
| EFI_PROGRESS_CODE, | |
| (EFI_IO_BUS_LPC | EFI_IOB_PC_ENABLE), | |
| ParentDevicePath | |
| ); | |
| // | |
| // Create all the children upon the first entrance | |
| // | |
| ChildDeviceNumber = SioCreateAllChildDevices ( | |
| This, | |
| Controller, | |
| PciIo, | |
| ParentDevicePath | |
| ); | |
| if (ChildDeviceNumber == 0) { | |
| Status = EFI_DEVICE_ERROR; | |
| } | |
| Done: | |
| if (EFI_ERROR (Status)) { | |
| if ((PciIo != NULL) && Enabled) { | |
| PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationSet, | |
| OriginalAttributes, | |
| NULL | |
| ); | |
| } | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| if (Private != NULL) { | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| Private, | |
| NULL | |
| ); | |
| FreePool (Private); | |
| } | |
| return Status; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Stops a device controller or a bus controller. | |
| The Stop() function is designed to be invoked from the EFI boot service | |
| DisconnectController(). As a result, much of the error checking on the | |
| parameters to Stop() has been moved into this common boot service. It is | |
| legal to call Stop() from other locations, but the following calling | |
| restrictions must be followed or the system behavior will not be | |
| deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous | |
| call to this same driver's Start() function. | |
| 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a | |
| valid EFI_HANDLE. In addition, all of these handles must have been created | |
| in this driver's Start() function, and the Start() function must have | |
| called OpenProtocol() on ControllerHandle with an Attribute of | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL | |
| instance. | |
| @param[in] ControllerHandle A handle to the device being stopped. The | |
| handle must support a bus specific I/O | |
| protocol for the driver to use to stop the | |
| device. | |
| @param[in] NumberOfChildren The number of child device handles in | |
| ChildHandleBuffer. | |
| @param[in] ChildHandleBuffer An array of child handles to be freed. May be | |
| NULL if NumberOfChildren is 0. | |
| @retval EFI_SUCCESS The device was stopped. | |
| @retval EFI_DEVICE_ERROR The device could not be stopped due to a | |
| device error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SioBusDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| SIO_BUS_DRIVER_PRIVATE_DATA *Private; | |
| UINTN Index; | |
| BOOLEAN AllChildrenStopped; | |
| EFI_SIO_PROTOCOL *Sio; | |
| SIO_DEV *SioDevice; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| if (NumberOfChildren == 0) { | |
| // | |
| // Restore PCI attributes | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| (VOID **)&Private, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = Private->PciIo->Attributes ( | |
| Private->PciIo, | |
| EfiPciIoAttributeOperationSet, | |
| Private->OriginalAttributes, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| gBS->UninstallProtocolInterface ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| Private | |
| ); | |
| FreePool (Private); | |
| // | |
| // Close the bus driver | |
| // | |
| Status = gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Stop all the children | |
| // | |
| AllChildrenStopped = TRUE; | |
| for (Index = 0; Index < NumberOfChildren; Index++) { | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiSioProtocolGuid, | |
| (VOID **)&Sio, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| SioDevice = SIO_DEV_FROM_SIO (Sio); | |
| // | |
| // Close the child handle | |
| // | |
| Status = gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index] | |
| ); | |
| Status = gBS->UninstallMultipleProtocolInterfaces ( | |
| ChildHandleBuffer[Index], | |
| &gEfiDevicePathProtocolGuid, | |
| SioDevice->DevicePath, | |
| &gEfiSioProtocolGuid, | |
| &SioDevice->Sio, | |
| NULL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| FreePool (SioDevice->DevicePath); | |
| FreePool (SioDevice); | |
| } else { | |
| // | |
| // Re-open PCI IO Protocol on behalf of the child device | |
| // because of failure of destroying the child device handle | |
| // | |
| gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| (VOID **)&PciIo, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index], | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| } | |
| } | |
| if (EFI_ERROR (Status)) { | |
| AllChildrenStopped = FALSE; | |
| } | |
| } | |
| if (!AllChildrenStopped) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| The entry point for the SioBusDxe driver. | |
| @param[in] ImageHandle The firmware allocated handle for the EFI image. | |
| @param[in] SystemTable A pointer to the EFI System Table. | |
| @retval EFI_SUCCESS The entry point is executed successfully. | |
| @retval other Some error occurs when executing this entry point. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SioBusDxeDriverEntryPoint ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| // | |
| // Install driver model protocol(s). | |
| // | |
| return EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gSioBusDriverBinding, | |
| ImageHandle, | |
| &gSioBusComponentName, | |
| &gSioBusComponentName2 | |
| ); | |
| } |