| # @file | |
| # Workspace file for KVMTool virtual platform. | |
| # | |
| # Copyright (c) 2018 - 2023, Arm Limited. All rights reserved. | |
| # | |
| # SPDX-License-Identifier: BSD-2-Clause-Patent | |
| # | |
| # | |
| ################################################################################ | |
| # | |
| # Defines Section - statements that will be processed to create a Makefile. | |
| # | |
| ################################################################################ | |
| [Defines] | |
| PLATFORM_NAME = ArmVirtKvmTool | |
| PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43 | |
| PLATFORM_VERSION = 0.1 | |
| DSC_SPECIFICATION = 0x0001001B | |
| !ifdef $(EDK2_OUT_DIR) | |
| OUTPUT_DIRECTORY = $(EDK2_OUT_DIR) | |
| !else | |
| OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-AARCH64 | |
| !endif | |
| SUPPORTED_ARCHITECTURES = AARCH64 | |
| BUILD_TARGETS = DEBUG|RELEASE | |
| SKUID_IDENTIFIER = DEFAULT | |
| FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf | |
| DEFINE PLAT_KVMTOOL = TRUE | |
| DEFINE ACPIVIEW_ENABLE = TRUE | |
| # This comes at the beginning of includes to pick all relevant defines early on. | |
| !include ArmVirtPkg/ArmVirtStackCookies.dsc.inc | |
| !include DynamicTablesPkg/DynamicTables.dsc.inc | |
| !include MdePkg/MdeLibs.dsc.inc | |
| # This comes at the end of includes to pick all relevant components without any | |
| # unintentional overrides. | |
| !include ArmVirtPkg/ArmVirt.dsc.inc | |
| [LibraryClasses.common] | |
| ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf | |
| ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf | |
| VirtNorFlashDeviceLib|OvmfPkg/Library/VirtNorFlashDeviceLib/VirtNorFlashDeviceLib.inf | |
| VirtNorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | |
| # BDS Libraries | |
| PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf | |
| PciHostBridgeUtilityLib|ArmVirtPkg/Library/ArmVirtPciHostBridgeUtilityLib/ArmVirtPciHostBridgeUtilityLib.inf | |
| AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf | |
| PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf | |
| PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf | |
| PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf | |
| SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | |
| !if $(TARGET) != RELEASE | |
| DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf | |
| !endif | |
| HwInfoParserLib|DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf | |
| DynamicPlatRepoLib|DynamicTablesPkg/Library/Common/DynamicPlatRepoLib/DynamicPlatRepoLib.inf | |
| ArmMonitorLib|ArmVirtPkg/Library/ArmVirtMonitorLib/ArmVirtMonitorLib.inf | |
| # OpensslLibFull/FullAccel is required for ECDH, see CryptoPkg/Readme.md | |
| OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLibFullAccel.inf | |
| ArmCcaBootSyncCryptoLib|ArmVirtPkg/Library/ArmCcaBootSyncCryptoLib/ArmCcaBootSyncCryptoLib.inf | |
| [LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM] | |
| PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf | |
| PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf | |
| SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | |
| !if $(TARGET) != RELEASE | |
| DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf | |
| !endif | |
| [LibraryClasses.common.DXE_RUNTIME_DRIVER] | |
| !if $(TARGET) != RELEASE | |
| DebugLib|MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf | |
| !endif | |
| [BuildOptions] | |
| *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES | |
| # | |
| # We need to avoid jump tables in SEC and BASE modules, so that the PE/COFF | |
| # self-relocation code itself is guaranteed to be position independent. | |
| # | |
| GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables | |
| ################################################################################ | |
| # | |
| # Pcd Section - list of all EDK II PCD Entries defined by this Platform | |
| # | |
| ################################################################################ | |
| [PcdsFeatureFlag.common] | |
| ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe. | |
| # It could be set FALSE to save size. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE | |
| # Use MMIO for accessing RTC controller registers. | |
| gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE | |
| [PcdsFixedAtBuild.common] | |
| gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F | |
| gArmPlatformTokenSpaceGuid.PcdCoreCount|1 | |
| gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800 | |
| # Size of the region used by UEFI in permanent memory (Reserved 64MB) | |
| gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000 | |
| # | |
| # TTY Terminal Type | |
| # 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM | |
| gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4 | |
| # Use MMIO for accessing Serial port registers. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF} | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 } | |
| # | |
| # The maximum physical I/O addressability of the processor, set with | |
| # BuildCpuHob(). | |
| # | |
| gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16 | |
| [PcdsPatchableInModule.common] | |
| # | |
| # This will be overridden in the code | |
| # | |
| gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0 | |
| gArmTokenSpaceGuid.PcdSystemMemorySize|0x0 | |
| # | |
| # The device tree base address is handed off by kvmtool. | |
| # We are booting from RAM using the Linux kernel boot protocol, | |
| # x0 will point to the DTB image in memory. | |
| # | |
| gUefiOvmfPkgTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0 | |
| gArmTokenSpaceGuid.PcdFdBaseAddress|0x0 | |
| gArmTokenSpaceGuid.PcdFvBaseAddress|0x0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0 | |
| [PcdsDynamicHii] | |
| gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5 | |
| [PcdsDynamicDefault.common] | |
| gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0 | |
| gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0 | |
| gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0 | |
| gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0 | |
| gArmTokenSpaceGuid.PcdArmArchTimerHypVirtIntrNum|0x0 | |
| # | |
| # ARM General Interrupt Controller | |
| # | |
| gArmTokenSpaceGuid.PcdGicDistributorBase|0x0 | |
| gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0 | |
| gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0 | |
| # | |
| # PCI settings | |
| # | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|TRUE | |
| # set PcdPciExpressBaseAddress to MAX_UINT64, which signifies that this | |
| # PCD and PcdPciDisableBusEnumeration above have not been assigned yet | |
| gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xFFFFFFFFFFFFFFFF | |
| gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation|0x0 | |
| # | |
| # Set video resolution for boot options and for text setup. | |
| # PlatformDxe can set the former at runtime. | |
| # | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480 | |
| # Setup Flash storage variables | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0 | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000 | |
| # Define PCD for emulating Runtime Variable storage when | |
| # CFI flash is absent. | |
| gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE | |
| ## RTC Register address in MMIO space. | |
| gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0 | |
| gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0 | |
| ################################################################################ | |
| # | |
| # Components Section - list of all EDK II Modules needed by this Platform | |
| # | |
| ################################################################################ | |
| [Components.common] | |
| # | |
| # PEI Phase modules | |
| # | |
| ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf { | |
| <LibraryClasses> | |
| ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf | |
| NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf | |
| PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf | |
| HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf | |
| PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf | |
| MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf | |
| NULL|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortProbeLib.inf | |
| } | |
| # | |
| # Architectural Protocols | |
| # | |
| MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf { | |
| <LibraryClasses> | |
| NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf | |
| NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf | |
| BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf | |
| } | |
| MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf | |
| MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf { | |
| <LibraryClasses> | |
| NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | |
| } | |
| PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf { | |
| <LibraryClasses> | |
| NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf | |
| } | |
| OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf { | |
| <LibraryClasses> | |
| # don't use unaligned CopyMem () on the UEFI varstore NOR flash region | |
| BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf | |
| } | |
| # | |
| # Platform Driver | |
| # | |
| ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf { | |
| <LibraryClasses> | |
| NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | |
| } | |
| OvmfPkg/VirtioNetDxe/VirtioNet.inf | |
| # | |
| # PCI support | |
| # | |
| MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf { | |
| <LibraryClasses> | |
| PciExpressLib|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf | |
| } | |
| # | |
| # Rng Support | |
| # | |
| SecurityPkg/RandomNumberGenerator/RngDxe/RngDxe.inf | |
| # | |
| # ACPI Support | |
| # | |
| ArmVirtPkg/KvmtoolCfgMgrDxe/ConfigurationManagerDxe.inf |