Omap35xxPkg/Library/Omap35xxTimerLib/TimerLib.c

/** @file

  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <Uefi.h>

#include <Library/BaseLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/IoLib.h>
#include <Library/OmapLib.h>

#include <Omap3530/Omap3530.h>

RETURN_STATUS
EFIAPI
TimerConstructor (
  VOID
  )
{
  UINTN  Timer            = PcdGet32(PcdOmap35xxFreeTimer);
  UINT32 TimerBaseAddress = TimerBase(Timer);

  if ((MmioRead32 (TimerBaseAddress + GPTIMER_TCLR) & TCLR_ST_ON) == 0) {
    // Set source clock for GPT3 & GPT4 to SYS_CLK
    MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);

    // Set count & reload registers
    MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);
    MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000);

    // Disable interrupts
    MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE);

    // Start Timer
    MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);

    // Disable OMAP Watchdog timer (WDT2)
    MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA);
    DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n"));
    MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555);
  }
  return EFI_SUCCESS;
}

UINTN
EFIAPI
MicroSecondDelay (
  IN  UINTN MicroSeconds
  )
{
  UINT64  NanoSeconds;

  NanoSeconds = MultU64x32(MicroSeconds, 1000);

  while (NanoSeconds > (UINTN)-1) {
    NanoSecondDelay((UINTN)-1);
    NanoSeconds -= (UINTN)-1;
  }

  NanoSecondDelay(NanoSeconds);

  return MicroSeconds;
}

UINTN
EFIAPI
NanoSecondDelay (
  IN  UINTN NanoSeconds
  )
{
  UINT32  Delay;
  UINT32  StartTime;
  UINT32  CurrentTime;
  UINT32  ElapsedTime;
  UINT32  TimerCountRegister;

  Delay = (NanoSeconds / PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds)) + 1;

  TimerCountRegister = TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR;

  StartTime = MmioRead32 (TimerCountRegister);

  do
  {
    CurrentTime = MmioRead32 (TimerCountRegister);
    ElapsedTime = CurrentTime - StartTime;
  } while (ElapsedTime < Delay);

  NanoSeconds = ElapsedTime * PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds);

  return NanoSeconds;
}

UINT64
EFIAPI
GetPerformanceCounter (
  VOID
  )
{
  return (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR);
}

UINT64
EFIAPI
GetPerformanceCounterProperties (
  OUT UINT64  *StartValue,  OPTIONAL
  OUT UINT64  *EndValue     OPTIONAL
  )
{
  if (StartValue != NULL) {
    // Timer starts with the reload value
    *StartValue = (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TLDR);
  }

  if (EndValue != NULL) {
    // Timer counts up to 0xFFFFFFFF
    *EndValue = 0xFFFFFFFF;
  }

  return PcdGet64(PcdEmbeddedPerformanceCounterFrequencyInHz);
}

/**
  Converts elapsed ticks of performance counter to time in nanoseconds.

  This function converts the elapsed ticks of running performance counter to
  time value in unit of nanoseconds.

  @param  Ticks     The number of elapsed ticks of running performance counter.

  @return The elapsed time in nanoseconds.

**/
UINT64
EFIAPI
GetTimeInNanoSecond (
  IN      UINT64                     Ticks
  )
{
  UINT32 Period;

  Period = PcdGet32 (PcdEmbeddedPerformanceCounterPeriodInNanoseconds);

  return (Ticks * Period);
}