| /** @file | |
| The EmmcDxe driver is used to manage the EMMC device. | |
| It produces BlockIo, BlockIo2 and StorageSecurity protocols to allow upper layer | |
| access the EMMC device. | |
| Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "EmmcDxe.h" | |
| // | |
| // EmmcDxe Driver Binding Protocol Instance | |
| // | |
| EFI_DRIVER_BINDING_PROTOCOL gEmmcDxeDriverBinding = { | |
| EmmcDxeDriverBindingSupported, | |
| EmmcDxeDriverBindingStart, | |
| EmmcDxeDriverBindingStop, | |
| 0x10, | |
| NULL, | |
| NULL | |
| }; | |
| // | |
| // Template for Emmc Partitions. | |
| // | |
| EMMC_PARTITION mEmmcPartitionTemplate = { | |
| EMMC_PARTITION_SIGNATURE, // Signature | |
| FALSE, // Enable | |
| EmmcPartitionUnknown, // PartitionType | |
| NULL, // Handle | |
| NULL, // DevicePath | |
| { // BlockIo | |
| EFI_BLOCK_IO_PROTOCOL_REVISION, | |
| NULL, | |
| EmmcReset, | |
| EmmcReadBlocks, | |
| EmmcWriteBlocks, | |
| EmmcFlushBlocks | |
| }, | |
| { // BlockIo2 | |
| NULL, | |
| EmmcResetEx, | |
| EmmcReadBlocksEx, | |
| EmmcWriteBlocksEx, | |
| EmmcFlushBlocksEx | |
| }, | |
| { // BlockMedia | |
| 0, // MediaId | |
| FALSE, // RemovableMedia | |
| TRUE, // MediaPresent | |
| FALSE, // LogicPartition | |
| FALSE, // ReadOnly | |
| FALSE, // WritingCache | |
| 0x200, // BlockSize | |
| 0, // IoAlign | |
| 0 // LastBlock | |
| }, | |
| { // StorageSecurity | |
| EmmcSecurityProtocolIn, | |
| EmmcSecurityProtocolOut | |
| }, | |
| { // EraseBlock | |
| EFI_ERASE_BLOCK_PROTOCOL_REVISION, | |
| 1, | |
| EmmcEraseBlocks | |
| }, | |
| { // DiskInfo | |
| EFI_DISK_INFO_SD_MMC_INTERFACE_GUID, | |
| EmmcDiskInfoInquiry, | |
| EmmcDiskInfoIdentify, | |
| EmmcDiskInfoSenseData, | |
| EmmcDiskInfoWhichIde | |
| }, | |
| { | |
| NULL, | |
| NULL | |
| }, | |
| NULL // Device | |
| }; | |
| /** | |
| Decode and print EMMC CSD Register content. | |
| @param[in] Csd Pointer to EMMC_CSD data structure. | |
| @retval EFI_SUCCESS The function completed successfully | |
| **/ | |
| EFI_STATUS | |
| DumpCsd ( | |
| IN EMMC_CSD *Csd | |
| ) | |
| { | |
| DEBUG((DEBUG_INFO, "== Dump Emmc Csd Register==\n")); | |
| DEBUG((DEBUG_INFO, " CSD structure 0x%x\n", Csd->CsdStructure)); | |
| DEBUG((DEBUG_INFO, " System specification version 0x%x\n", Csd->SpecVers)); | |
| DEBUG((DEBUG_INFO, " Data read access-time 1 0x%x\n", Csd->Taac)); | |
| DEBUG((DEBUG_INFO, " Data read access-time 2 0x%x\n", Csd->Nsac)); | |
| DEBUG((DEBUG_INFO, " Max. bus clock frequency 0x%x\n", Csd->TranSpeed)); | |
| DEBUG((DEBUG_INFO, " Device command classes 0x%x\n", Csd->Ccc)); | |
| DEBUG((DEBUG_INFO, " Max. read data block length 0x%x\n", Csd->ReadBlLen)); | |
| DEBUG((DEBUG_INFO, " Partial blocks for read allowed 0x%x\n", Csd->ReadBlPartial)); | |
| DEBUG((DEBUG_INFO, " Write block misalignment 0x%x\n", Csd->WriteBlkMisalign)); | |
| DEBUG((DEBUG_INFO, " Read block misalignment 0x%x\n", Csd->ReadBlkMisalign)); | |
| DEBUG((DEBUG_INFO, " DSR implemented 0x%x\n", Csd->DsrImp)); | |
| DEBUG((DEBUG_INFO, " Device size 0x%x\n", Csd->CSizeLow | (Csd->CSizeHigh << 2))); | |
| DEBUG((DEBUG_INFO, " Max. read current @ VDD min 0x%x\n", Csd->VddRCurrMin)); | |
| DEBUG((DEBUG_INFO, " Max. read current @ VDD max 0x%x\n", Csd->VddRCurrMax)); | |
| DEBUG((DEBUG_INFO, " Max. write current @ VDD min 0x%x\n", Csd->VddWCurrMin)); | |
| DEBUG((DEBUG_INFO, " Max. write current @ VDD max 0x%x\n", Csd->VddWCurrMax)); | |
| DEBUG((DEBUG_INFO, " Device size multiplier 0x%x\n", Csd->CSizeMult)); | |
| DEBUG((DEBUG_INFO, " Erase group size 0x%x\n", Csd->EraseGrpSize)); | |
| DEBUG((DEBUG_INFO, " Erase group size multiplier 0x%x\n", Csd->EraseGrpMult)); | |
| DEBUG((DEBUG_INFO, " Write protect group size 0x%x\n", Csd->WpGrpSize)); | |
| DEBUG((DEBUG_INFO, " Write protect group enable 0x%x\n", Csd->WpGrpEnable)); | |
| DEBUG((DEBUG_INFO, " Manufacturer default ECC 0x%x\n", Csd->DefaultEcc)); | |
| DEBUG((DEBUG_INFO, " Write speed factor 0x%x\n", Csd->R2WFactor)); | |
| DEBUG((DEBUG_INFO, " Max. write data block length 0x%x\n", Csd->WriteBlLen)); | |
| DEBUG((DEBUG_INFO, " Partial blocks for write allowed 0x%x\n", Csd->WriteBlPartial)); | |
| DEBUG((DEBUG_INFO, " Content protection application 0x%x\n", Csd->ContentProtApp)); | |
| DEBUG((DEBUG_INFO, " File format group 0x%x\n", Csd->FileFormatGrp)); | |
| DEBUG((DEBUG_INFO, " Copy flag (OTP) 0x%x\n", Csd->Copy)); | |
| DEBUG((DEBUG_INFO, " Permanent write protection 0x%x\n", Csd->PermWriteProtect)); | |
| DEBUG((DEBUG_INFO, " Temporary write protection 0x%x\n", Csd->TmpWriteProtect)); | |
| DEBUG((DEBUG_INFO, " File format 0x%x\n", Csd->FileFormat)); | |
| DEBUG((DEBUG_INFO, " ECC code 0x%x\n", Csd->Ecc)); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Decode and print EMMC EXT_CSD Register content. | |
| @param[in] ExtCsd Pointer to the EMMC_EXT_CSD data structure. | |
| @retval EFI_SUCCESS The function completed successfully | |
| **/ | |
| EFI_STATUS | |
| DumpExtCsd ( | |
| IN EMMC_EXT_CSD *ExtCsd | |
| ) | |
| { | |
| DEBUG((DEBUG_INFO, "==Dump Emmc ExtCsd Register==\n")); | |
| DEBUG((DEBUG_INFO, " Supported Command Sets 0x%x\n", ExtCsd->CmdSet)); | |
| DEBUG((DEBUG_INFO, " HPI features 0x%x\n", ExtCsd->HpiFeatures)); | |
| DEBUG((DEBUG_INFO, " Background operations support 0x%x\n", ExtCsd->BkOpsSupport)); | |
| DEBUG((DEBUG_INFO, " Background operations status 0x%x\n", ExtCsd->BkopsStatus)); | |
| DEBUG((DEBUG_INFO, " Number of correctly programmed sectors 0x%x\n", *((UINT32*)&ExtCsd->CorrectlyPrgSectorsNum[0]))); | |
| DEBUG((DEBUG_INFO, " Initialization time after partitioning 0x%x\n", ExtCsd->IniTimeoutAp)); | |
| DEBUG((DEBUG_INFO, " TRIM Multiplier 0x%x\n", ExtCsd->TrimMult)); | |
| DEBUG((DEBUG_INFO, " Secure Feature support 0x%x\n", ExtCsd->SecFeatureSupport)); | |
| DEBUG((DEBUG_INFO, " Secure Erase Multiplier 0x%x\n", ExtCsd->SecEraseMult)); | |
| DEBUG((DEBUG_INFO, " Secure TRIM Multiplier 0x%x\n", ExtCsd->SecTrimMult)); | |
| DEBUG((DEBUG_INFO, " Boot information 0x%x\n", ExtCsd->BootInfo)); | |
| DEBUG((DEBUG_INFO, " Boot partition size 0x%x\n", ExtCsd->BootSizeMult)); | |
| DEBUG((DEBUG_INFO, " Access size 0x%x\n", ExtCsd->AccSize)); | |
| DEBUG((DEBUG_INFO, " High-capacity erase unit size 0x%x\n", ExtCsd->HcEraseGrpSize)); | |
| DEBUG((DEBUG_INFO, " High-capacity erase timeout 0x%x\n", ExtCsd->EraseTimeoutMult)); | |
| DEBUG((DEBUG_INFO, " Reliable write sector count 0x%x\n", ExtCsd->RelWrSecC)); | |
| DEBUG((DEBUG_INFO, " High-capacity write protect group size 0x%x\n", ExtCsd->HcWpGrpSize)); | |
| DEBUG((DEBUG_INFO, " Sleep/awake timeout 0x%x\n", ExtCsd->SATimeout)); | |
| DEBUG((DEBUG_INFO, " Sector Count 0x%x\n", *((UINT32*)&ExtCsd->SecCount[0]))); | |
| DEBUG((DEBUG_INFO, " Partition switching timing 0x%x\n", ExtCsd->PartitionSwitchTime)); | |
| DEBUG((DEBUG_INFO, " Out-of-interrupt busy timing 0x%x\n", ExtCsd->OutOfInterruptTime)); | |
| DEBUG((DEBUG_INFO, " I/O Driver Strength 0x%x\n", ExtCsd->DriverStrength)); | |
| DEBUG((DEBUG_INFO, " Device type 0x%x\n", ExtCsd->DeviceType)); | |
| DEBUG((DEBUG_INFO, " CSD STRUCTURE 0x%x\n", ExtCsd->CsdStructure)); | |
| DEBUG((DEBUG_INFO, " Extended CSD revision 0x%x\n", ExtCsd->ExtCsdRev)); | |
| DEBUG((DEBUG_INFO, " Command set 0x%x\n", ExtCsd->CmdSet)); | |
| DEBUG((DEBUG_INFO, " Command set revision 0x%x\n", ExtCsd->CmdSetRev)); | |
| DEBUG((DEBUG_INFO, " Power class 0x%x\n", ExtCsd->PowerClass)); | |
| DEBUG((DEBUG_INFO, " High-speed interface timing 0x%x\n", ExtCsd->HsTiming)); | |
| DEBUG((DEBUG_INFO, " Bus width mode 0x%x\n", ExtCsd->BusWidth)); | |
| DEBUG((DEBUG_INFO, " Erased memory content 0x%x\n", ExtCsd->ErasedMemCont)); | |
| DEBUG((DEBUG_INFO, " Partition configuration 0x%x\n", ExtCsd->PartitionConfig)); | |
| DEBUG((DEBUG_INFO, " Boot config protection 0x%x\n", ExtCsd->BootConfigProt)); | |
| DEBUG((DEBUG_INFO, " Boot bus Conditions 0x%x\n", ExtCsd->BootBusConditions)); | |
| DEBUG((DEBUG_INFO, " High-density erase group definition 0x%x\n", ExtCsd->EraseGroupDef)); | |
| DEBUG((DEBUG_INFO, " Boot write protection status register 0x%x\n", ExtCsd->BootWpStatus)); | |
| DEBUG((DEBUG_INFO, " Boot area write protection register 0x%x\n", ExtCsd->BootWp)); | |
| DEBUG((DEBUG_INFO, " User area write protection register 0x%x\n", ExtCsd->UserWp)); | |
| DEBUG((DEBUG_INFO, " FW configuration 0x%x\n", ExtCsd->FwConfig)); | |
| DEBUG((DEBUG_INFO, " RPMB Size 0x%x\n", ExtCsd->RpmbSizeMult)); | |
| DEBUG((DEBUG_INFO, " H/W reset function 0x%x\n", ExtCsd->RstFunction)); | |
| DEBUG((DEBUG_INFO, " Partitioning Support 0x%x\n", ExtCsd->PartitioningSupport)); | |
| DEBUG((DEBUG_INFO, " Max Enhanced Area Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->MaxEnhSizeMult[2], ExtCsd->MaxEnhSizeMult[1], ExtCsd->MaxEnhSizeMult[0])); | |
| DEBUG((DEBUG_INFO, " Partitions attribute 0x%x\n", ExtCsd->PartitionsAttribute)); | |
| DEBUG((DEBUG_INFO, " Partitioning Setting 0x%x\n", ExtCsd->PartitionSettingCompleted)); | |
| DEBUG((DEBUG_INFO, " General Purpose Partition 1 Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->GpSizeMult[2], ExtCsd->GpSizeMult[1], ExtCsd->GpSizeMult[0])); | |
| DEBUG((DEBUG_INFO, " General Purpose Partition 2 Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->GpSizeMult[5], ExtCsd->GpSizeMult[4], ExtCsd->GpSizeMult[3])); | |
| DEBUG((DEBUG_INFO, " General Purpose Partition 3 Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->GpSizeMult[8], ExtCsd->GpSizeMult[7], ExtCsd->GpSizeMult[6])); | |
| DEBUG((DEBUG_INFO, " General Purpose Partition 4 Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->GpSizeMult[11], ExtCsd->GpSizeMult[10], ExtCsd->GpSizeMult[9])); | |
| DEBUG((DEBUG_INFO, " Enhanced User Data Area Size 0x%02x%02x%02x\n", \ | |
| ExtCsd->EnhSizeMult[2], ExtCsd->EnhSizeMult[1], ExtCsd->EnhSizeMult[0])); | |
| DEBUG((DEBUG_INFO, " Enhanced User Data Start Address 0x%x\n", *((UINT32*)&ExtCsd->EnhStartAddr[0]))); | |
| DEBUG((DEBUG_INFO, " Bad Block Management mode 0x%x\n", ExtCsd->SecBadBlkMgmnt)); | |
| DEBUG((DEBUG_INFO, " Native sector size 0x%x\n", ExtCsd->NativeSectorSize)); | |
| DEBUG((DEBUG_INFO, " Sector size emulation 0x%x\n", ExtCsd->UseNativeSector)); | |
| DEBUG((DEBUG_INFO, " Sector size 0x%x\n", ExtCsd->DataSectorSize)); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Get EMMC device model name. | |
| @param[in, out] Device The pointer to the EMMC_DEVICE data structure. | |
| @param[in] Cid Pointer to EMMC_CID data structure. | |
| @retval EFI_SUCCESS The function completed successfully | |
| **/ | |
| EFI_STATUS | |
| GetEmmcModelName ( | |
| IN OUT EMMC_DEVICE *Device, | |
| IN EMMC_CID *Cid | |
| ) | |
| { | |
| CHAR8 String[EMMC_MODEL_NAME_MAX_LEN]; | |
| ZeroMem (String, sizeof (String)); | |
| CopyMem (String, &Cid->OemId, sizeof (Cid->OemId)); | |
| String[sizeof (Cid->OemId)] = ' '; | |
| CopyMem (String + sizeof (Cid->OemId) + 1, Cid->ProductName, sizeof (Cid->ProductName)); | |
| String[sizeof (Cid->OemId) + sizeof (Cid->ProductName)] = ' '; | |
| CopyMem (String + sizeof (Cid->OemId) + sizeof (Cid->ProductName) + 1, Cid->ProductSerialNumber, sizeof (Cid->ProductSerialNumber)); | |
| AsciiStrToUnicodeStrS (String, Device->ModelName, sizeof (Device->ModelName) / sizeof (Device->ModelName[0])); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Discover all partitions in the EMMC device. | |
| @param[in] Device The pointer to the EMMC_DEVICE data structure. | |
| @retval EFI_SUCCESS All the partitions in the device are successfully enumerated. | |
| @return Others Some error occurs when enumerating the partitions. | |
| **/ | |
| EFI_STATUS | |
| DiscoverAllPartitions ( | |
| IN EMMC_DEVICE *Device | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EMMC_PARTITION *Partition; | |
| EMMC_CSD *Csd; | |
| EMMC_CID *Cid; | |
| EMMC_EXT_CSD *ExtCsd; | |
| UINT8 Slot; | |
| UINT64 Capacity; | |
| UINT32 DevStatus; | |
| UINT8 Index; | |
| UINT32 SecCount; | |
| UINT32 GpSizeMult; | |
| Slot = Device->Slot; | |
| Status = EmmcSendStatus (Device, Slot + 1, &DevStatus); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Deselect the device to force it enter stby mode before getting CSD | |
| // register content. | |
| // Note here we don't judge return status as some EMMC devices return | |
| // error but the state has been stby. | |
| // | |
| EmmcSelect (Device, 0); | |
| Status = EmmcSendStatus (Device, Slot + 1, &DevStatus); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Csd = &Device->Csd; | |
| Status = EmmcGetCsd (Device, Slot + 1, Csd); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| DumpCsd (Csd); | |
| if ((Csd->CSizeLow | Csd->CSizeHigh << 2) == 0xFFF) { | |
| Device->SectorAddressing = TRUE; | |
| } else { | |
| Device->SectorAddressing = FALSE; | |
| } | |
| Cid = &Device->Cid; | |
| Status = EmmcGetCid (Device, Slot + 1, Cid); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = EmmcSelect (Device, Slot + 1); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| ExtCsd = &Device->ExtCsd; | |
| Status = EmmcGetExtCsd (Device, ExtCsd); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| DumpExtCsd (ExtCsd); | |
| if (ExtCsd->ExtCsdRev < 5) { | |
| DEBUG ((EFI_D_ERROR, "The EMMC device version is too low, we don't support!!!\n")); | |
| return EFI_UNSUPPORTED; | |
| } | |
| if ((ExtCsd->PartitioningSupport & BIT0) != BIT0) { | |
| DEBUG ((EFI_D_ERROR, "The EMMC device doesn't support Partition Feature!!!\n")); | |
| return EFI_UNSUPPORTED; | |
| } | |
| for (Index = 0; Index < EMMC_MAX_PARTITIONS; Index++) { | |
| Partition = &Device->Partition[Index]; | |
| CopyMem (Partition, &mEmmcPartitionTemplate, sizeof (EMMC_PARTITION)); | |
| Partition->Device = Device; | |
| InitializeListHead (&Partition->Queue); | |
| Partition->BlockIo.Media = &Partition->BlockMedia; | |
| Partition->BlockIo2.Media = &Partition->BlockMedia; | |
| Partition->PartitionType = Index; | |
| Partition->BlockMedia.IoAlign = Device->Private->PassThru->IoAlign; | |
| Partition->BlockMedia.BlockSize = 0x200; | |
| Partition->BlockMedia.LastBlock = 0x00; | |
| Partition->BlockMedia.RemovableMedia = FALSE; | |
| Partition->BlockMedia.MediaPresent = TRUE; | |
| Partition->BlockMedia.LogicalPartition = FALSE; | |
| switch (Index) { | |
| case EmmcPartitionUserData: | |
| SecCount = *(UINT32*)&ExtCsd->SecCount; | |
| Capacity = MultU64x32 ((UINT64) SecCount, 0x200); | |
| break; | |
| case EmmcPartitionBoot1: | |
| case EmmcPartitionBoot2: | |
| Capacity = ExtCsd->BootSizeMult * SIZE_128KB; | |
| break; | |
| case EmmcPartitionRPMB: | |
| Capacity = ExtCsd->RpmbSizeMult * SIZE_128KB; | |
| break; | |
| case EmmcPartitionGP1: | |
| GpSizeMult = (UINT32)(ExtCsd->GpSizeMult[0] | (ExtCsd->GpSizeMult[1] << 8) | (ExtCsd->GpSizeMult[2] << 16)); | |
| Capacity = MultU64x32 (MultU64x32 (MultU64x32 ((UINT64)GpSizeMult, ExtCsd->HcWpGrpSize), ExtCsd->HcEraseGrpSize), SIZE_512KB); | |
| break; | |
| case EmmcPartitionGP2: | |
| GpSizeMult = (UINT32)(ExtCsd->GpSizeMult[3] | (ExtCsd->GpSizeMult[4] << 8) | (ExtCsd->GpSizeMult[5] << 16)); | |
| Capacity = MultU64x32 (MultU64x32 (MultU64x32 ((UINT64)GpSizeMult, ExtCsd->HcWpGrpSize), ExtCsd->HcEraseGrpSize), SIZE_512KB); | |
| break; | |
| case EmmcPartitionGP3: | |
| GpSizeMult = (UINT32)(ExtCsd->GpSizeMult[6] | (ExtCsd->GpSizeMult[7] << 8) | (ExtCsd->GpSizeMult[8] << 16)); | |
| Capacity = MultU64x32 (MultU64x32 (MultU64x32 ((UINT64)GpSizeMult, ExtCsd->HcWpGrpSize), ExtCsd->HcEraseGrpSize), SIZE_512KB); | |
| break; | |
| case EmmcPartitionGP4: | |
| GpSizeMult = (UINT32)(ExtCsd->GpSizeMult[9] | (ExtCsd->GpSizeMult[10] << 8) | (ExtCsd->GpSizeMult[11] << 16)); | |
| Capacity = MultU64x32 (MultU64x32 (MultU64x32 ((UINT64)GpSizeMult, ExtCsd->HcWpGrpSize), ExtCsd->HcEraseGrpSize), SIZE_512KB); | |
| break; | |
| default: | |
| ASSERT (FALSE); | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (Capacity != 0) { | |
| Partition->Enable = TRUE; | |
| Partition->BlockMedia.LastBlock = DivU64x32 (Capacity, Partition->BlockMedia.BlockSize) - 1; | |
| } | |
| if ((ExtCsd->EraseGroupDef & BIT0) == 0) { | |
| if (Csd->WriteBlLen < 9) { | |
| Partition->EraseBlock.EraseLengthGranularity = 1; | |
| } else { | |
| Partition->EraseBlock.EraseLengthGranularity = (Csd->EraseGrpMult + 1) * (Csd->EraseGrpSize + 1) * (1 << (Csd->WriteBlLen - 9)); | |
| } | |
| } else { | |
| Partition->EraseBlock.EraseLengthGranularity = 1024 * ExtCsd->HcEraseGrpSize; | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Install BlkIo, BlkIo2 and Ssp protocols for the specified partition in the EMMC device. | |
| @param[in] Device The pointer to the EMMC_DEVICE data structure. | |
| @param[in] Index The index of the partition. | |
| @retval EFI_SUCCESS The protocols are installed successfully. | |
| @retval Others Some error occurs when installing the protocols. | |
| **/ | |
| EFI_STATUS | |
| InstallProtocolOnPartition ( | |
| IN EMMC_DEVICE *Device, | |
| IN UINT8 Index | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EMMC_PARTITION *Partition; | |
| CONTROLLER_DEVICE_PATH ControlNode; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_DEVICE_PATH_PROTOCOL *DevicePath; | |
| EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath; | |
| EFI_HANDLE DeviceHandle; | |
| // | |
| // Build device path | |
| // | |
| ParentDevicePath = Device->DevicePath; | |
| ControlNode.Header.Type = HARDWARE_DEVICE_PATH; | |
| ControlNode.Header.SubType = HW_CONTROLLER_DP; | |
| SetDevicePathNodeLength (&ControlNode.Header, sizeof (CONTROLLER_DEVICE_PATH)); | |
| ControlNode.ControllerNumber = Index; | |
| DevicePath = AppendDevicePathNode (ParentDevicePath, (EFI_DEVICE_PATH_PROTOCOL*)&ControlNode); | |
| if (DevicePath == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Error; | |
| } | |
| DeviceHandle = NULL; | |
| RemainingDevicePath = DevicePath; | |
| Status = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &RemainingDevicePath, &DeviceHandle); | |
| if (!EFI_ERROR (Status) && (DeviceHandle != NULL) && IsDevicePathEnd(RemainingDevicePath)) { | |
| Status = EFI_ALREADY_STARTED; | |
| goto Error; | |
| } | |
| Partition = &Device->Partition[Index]; | |
| Partition->DevicePath = DevicePath; | |
| if (Partition->Enable) { | |
| // | |
| // Install BlkIo/BlkIo2/Ssp for the specified partition | |
| // | |
| if (Partition->PartitionType != EmmcPartitionRPMB) { | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &Partition->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| Partition->DevicePath, | |
| &gEfiBlockIoProtocolGuid, | |
| &Partition->BlockIo, | |
| &gEfiBlockIo2ProtocolGuid, | |
| &Partition->BlockIo2, | |
| &gEfiEraseBlockProtocolGuid, | |
| &Partition->EraseBlock, | |
| &gEfiDiskInfoProtocolGuid, | |
| &Partition->DiskInfo, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| if (((Partition->PartitionType == EmmcPartitionUserData) || | |
| (Partition->PartitionType == EmmcPartitionBoot1) || | |
| (Partition->PartitionType == EmmcPartitionBoot2)) && | |
| ((Device->Csd.Ccc & BIT10) != 0)) { | |
| Status = gBS->InstallProtocolInterface ( | |
| &Partition->Handle, | |
| &gEfiStorageSecurityCommandProtocolGuid, | |
| EFI_NATIVE_INTERFACE, | |
| &Partition->StorageSecurity | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| &Partition->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| Partition->DevicePath, | |
| &gEfiBlockIoProtocolGuid, | |
| &Partition->BlockIo, | |
| &gEfiBlockIo2ProtocolGuid, | |
| &Partition->BlockIo2, | |
| &gEfiEraseBlockProtocolGuid, | |
| &Partition->EraseBlock, | |
| &gEfiDiskInfoProtocolGuid, | |
| &Partition->DiskInfo, | |
| NULL | |
| ); | |
| goto Error; | |
| } | |
| } | |
| gBS->OpenProtocol ( | |
| Device->Private->Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID **) &(Device->Private->PassThru), | |
| Device->Private->DriverBindingHandle, | |
| Partition->Handle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| } | |
| } else { | |
| Status = EFI_INVALID_PARAMETER; | |
| } | |
| Error: | |
| if (EFI_ERROR (Status) && (DevicePath != NULL)) { | |
| FreePool (DevicePath); | |
| } | |
| return Status; | |
| } | |
| /** | |
| Scan EMMC Bus to discover the device. | |
| @param[in] Private The EMMC driver private data structure. | |
| @param[in] Slot The slot number to check device present. | |
| @param[in] RemainingDevicePath The pointer to the remaining device path. | |
| @retval EFI_SUCCESS Successfully to discover the device and attach | |
| SdMmcIoProtocol to it. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack | |
| of resources. | |
| @retval EFI_ALREADY_STARTED The device was discovered before. | |
| @retval Others Fail to discover the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| DiscoverEmmcDevice ( | |
| IN EMMC_DRIVER_PRIVATE_DATA *Private, | |
| IN UINT8 Slot, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EMMC_DEVICE *Device; | |
| EFI_DEVICE_PATH_PROTOCOL *DevicePath; | |
| EFI_DEVICE_PATH_PROTOCOL *NewDevicePath; | |
| EFI_DEVICE_PATH_PROTOCOL *RemainingEmmcDevPath; | |
| EFI_DEV_PATH *Node; | |
| EFI_HANDLE DeviceHandle; | |
| EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru; | |
| UINT8 Index; | |
| Device = NULL; | |
| DevicePath = NULL; | |
| NewDevicePath = NULL; | |
| RemainingDevicePath = NULL; | |
| PassThru = Private->PassThru; | |
| Device = &Private->Device[Slot]; | |
| // | |
| // Build Device Path to check if the EMMC device present at the slot. | |
| // | |
| Status = PassThru->BuildDevicePath ( | |
| PassThru, | |
| Slot, | |
| &DevicePath | |
| ); | |
| if (EFI_ERROR(Status)) { | |
| return Status; | |
| } | |
| if (DevicePath->SubType != MSG_EMMC_DP) { | |
| Status = EFI_UNSUPPORTED; | |
| goto Error; | |
| } | |
| NewDevicePath = AppendDevicePathNode ( | |
| Private->ParentDevicePath, | |
| DevicePath | |
| ); | |
| if (NewDevicePath == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Error; | |
| } | |
| DeviceHandle = NULL; | |
| RemainingEmmcDevPath = NewDevicePath; | |
| Status = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &RemainingEmmcDevPath, &DeviceHandle); | |
| // | |
| // The device path to the EMMC device doesn't exist. It means the corresponding device private data hasn't been initialized. | |
| // | |
| if (EFI_ERROR (Status) || (DeviceHandle == NULL) || !IsDevicePathEnd (RemainingEmmcDevPath)) { | |
| Device->DevicePath = NewDevicePath; | |
| Device->Slot = Slot; | |
| Device->Private = Private; | |
| // | |
| // Expose user area in the Sd memory card to upper layer. | |
| // | |
| Status = DiscoverAllPartitions (Device); | |
| if (EFI_ERROR(Status)) { | |
| FreePool (NewDevicePath); | |
| goto Error; | |
| } | |
| Status = gBS->InstallProtocolInterface ( | |
| &Device->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| EFI_NATIVE_INTERFACE, | |
| Device->DevicePath | |
| ); | |
| if (EFI_ERROR(Status)) { | |
| FreePool (NewDevicePath); | |
| goto Error; | |
| } | |
| Device->ControllerNameTable = NULL; | |
| GetEmmcModelName (Device, &Device->Cid); | |
| AddUnicodeString2 ( | |
| "eng", | |
| gEmmcDxeComponentName.SupportedLanguages, | |
| &Device->ControllerNameTable, | |
| Device->ModelName, | |
| TRUE | |
| ); | |
| AddUnicodeString2 ( | |
| "en", | |
| gEmmcDxeComponentName.SupportedLanguages, | |
| &Device->ControllerNameTable, | |
| Device->ModelName, | |
| FALSE | |
| ); | |
| } | |
| if (RemainingDevicePath == NULL) { | |
| // | |
| // Expose all partitions in the Emmc device to upper layer. | |
| // | |
| for (Index = 0; Index < EMMC_MAX_PARTITIONS; Index++) { | |
| InstallProtocolOnPartition (Device, Index); | |
| } | |
| } else if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // Enumerate the specified partition | |
| // | |
| Node = (EFI_DEV_PATH *) RemainingDevicePath; | |
| if ((DevicePathType (&Node->DevPath) != HARDWARE_DEVICE_PATH) || | |
| (DevicePathSubType (&Node->DevPath) != HW_CONTROLLER_DP) || | |
| (DevicePathNodeLength (&Node->DevPath) != sizeof (CONTROLLER_DEVICE_PATH))) { | |
| Status = EFI_INVALID_PARAMETER; | |
| goto Error; | |
| } | |
| Index = (UINT8)Node->Controller.ControllerNumber; | |
| if (Index >= EMMC_MAX_PARTITIONS) { | |
| Status = EFI_INVALID_PARAMETER; | |
| goto Error; | |
| } | |
| Status = InstallProtocolOnPartition (Device, Index); | |
| } | |
| Error: | |
| FreePool (DevicePath); | |
| return Status; | |
| } | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is provided, | |
| it further tests to see if this driver supports creating a handle for the specified child device. | |
| This function checks to see if the driver specified by This supports the device specified by | |
| ControllerHandle. Drivers will typically use the device path attached to | |
| ControllerHandle and/or the services from the bus I/O abstraction attached to | |
| ControllerHandle to determine if the driver supports ControllerHandle. This function | |
| may be called many times during platform initialization. In order to reduce boot times, the tests | |
| performed by this function must be very small, and take as little time as possible to execute. This | |
| function must not change the state of any hardware devices, and this function must be aware that the | |
| device specified by ControllerHandle may already be managed by the same driver or a | |
| different driver. This function must match its calls to AllocatePages() with FreePages(), | |
| AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
| Since ControllerHandle may have been previously started by the same driver, if a protocol is | |
| already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
| to guarantee the state of ControllerHandle is not modified by this function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter is not NULL, then | |
| the bus driver must determine if the bus controller specified | |
| by ControllerHandle and the child controller specified | |
| by RemainingDevicePath are both supported by this | |
| bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by the driver | |
| specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by a different | |
| driver or an application that requires exclusive access. | |
| Currently not implemented. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EmmcDxeDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru; | |
| UINT8 Slot; | |
| // | |
| // Test EFI_SD_MMC_PASS_THRU_PROTOCOL on the controller handle. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID**) &PassThru, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (Status == EFI_ALREADY_STARTED) { | |
| return EFI_SUCCESS; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Test RemainingDevicePath is valid or not. | |
| // | |
| if ((RemainingDevicePath != NULL) && !IsDevicePathEnd (RemainingDevicePath)) { | |
| Status = PassThru->GetSlotNumber (PassThru, RemainingDevicePath, &Slot); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Close the I/O Abstraction(s) used to perform the supported test | |
| // | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| return Status; | |
| } | |
| } | |
| // | |
| // Close the I/O Abstraction(s) used to perform the supported test | |
| // | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| // | |
| // Open the EFI Device Path protocol needed to perform the supported test | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| return Status; | |
| } | |
| /** | |
| Starts a device controller or a bus controller. | |
| The Start() function is designed to be invoked from the EFI boot service ConnectController(). | |
| As a result, much of the error checking on the parameters to Start() has been moved into this | |
| common boot service. It is legal to call Start() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE. | |
| 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned | |
| EFI_DEVICE_PATH_PROTOCOL. | |
| 3. Prior to calling Start(), the Supported() function for the driver specified by This must | |
| have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to start. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For a bus driver, if this parameter is NULL, then handles | |
| for all the children of Controller are created by this driver. | |
| If this parameter is not NULL and the first Device Path Node is | |
| not the End of Device Path Node, then only the handle for the | |
| child device specified by the first Device Path Node of | |
| RemainingDevicePath is created by this driver. | |
| If the first Device Path Node of RemainingDevicePath is | |
| the End of Device Path Node, no child handle is created by this | |
| driver. | |
| @retval EFI_SUCCESS The device was started. | |
| @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval Others The driver failded to start the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EmmcDxeDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EMMC_DRIVER_PRIVATE_DATA *Private; | |
| UINT8 Slot; | |
| Private = NULL; | |
| PassThru = NULL; | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID **) &PassThru, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) { | |
| return Status; | |
| } | |
| // | |
| // Check EFI_ALREADY_STARTED to reuse the original EMMC_DRIVER_PRIVATE_DATA. | |
| // | |
| if (Status != EFI_ALREADY_STARTED) { | |
| Private = AllocateZeroPool (sizeof (EMMC_DRIVER_PRIVATE_DATA)); | |
| if (Private == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Error; | |
| } | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| Private->PassThru = PassThru; | |
| Private->Controller = Controller; | |
| Private->ParentDevicePath = ParentDevicePath; | |
| Private->DriverBindingHandle = This->DriverBindingHandle; | |
| Status = gBS->InstallProtocolInterface ( | |
| &Controller, | |
| &gEfiCallerIdGuid, | |
| EFI_NATIVE_INTERFACE, | |
| Private | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| } else { | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| (VOID **) &Private, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| } | |
| if (RemainingDevicePath == NULL) { | |
| Slot = 0xFF; | |
| while (TRUE) { | |
| Status = PassThru->GetNextSlot (PassThru, &Slot); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // Cannot find more legal slots. | |
| // | |
| Status = EFI_SUCCESS; | |
| break; | |
| } | |
| Status = DiscoverEmmcDevice (Private, Slot, NULL); | |
| if (EFI_ERROR (Status) && (Status != EFI_ALREADY_STARTED)) { | |
| break; | |
| } | |
| } | |
| } else if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| Status = PassThru->GetSlotNumber (PassThru, RemainingDevicePath, &Slot); | |
| if (!EFI_ERROR (Status)) { | |
| Status = DiscoverEmmcDevice (Private, Slot, NextDevicePathNode (RemainingDevicePath)); | |
| } | |
| } | |
| Error: | |
| if (EFI_ERROR (Status) && (Status != EFI_ALREADY_STARTED)) { | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| if (Private != NULL) { | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| Private, | |
| NULL | |
| ); | |
| FreePool (Private); | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Stops a device controller or a bus controller. | |
| The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). | |
| As a result, much of the error checking on the parameters to Stop() has been moved | |
| into this common boot service. It is legal to call Stop() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this | |
| same driver's Start() function. | |
| 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid | |
| EFI_HANDLE. In addition, all of these handles must have been created in this driver's | |
| Start() function, and the Start() function must have called OpenProtocol() on | |
| ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle A handle to the device being stopped. The handle must | |
| support a bus specific I/O protocol for the driver | |
| to use to stop the device. | |
| @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. | |
| @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL | |
| if NumberOfChildren is 0. | |
| @retval EFI_SUCCESS The device was stopped. | |
| @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EmmcDxeDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| BOOLEAN AllChildrenStopped; | |
| UINTN Index; | |
| EFI_DEVICE_PATH_PROTOCOL *DevicePath; | |
| EMMC_DRIVER_PRIVATE_DATA *Private; | |
| EMMC_DEVICE *Device; | |
| EMMC_PARTITION *Partition; | |
| EFI_BLOCK_IO_PROTOCOL *BlockIo; | |
| EFI_BLOCK_IO2_PROTOCOL *BlockIo2; | |
| EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *StorageSecurity; | |
| LIST_ENTRY *Link; | |
| LIST_ENTRY *NextLink; | |
| EMMC_REQUEST *Request; | |
| BlockIo = NULL; | |
| BlockIo2 = NULL; | |
| if (NumberOfChildren == 0) { | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| (VOID **) &Private, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| for (Index = 0; Index < EMMC_MAX_DEVICES; Index++) { | |
| Device = &Private->Device[Index]; | |
| Status = gBS->OpenProtocol ( | |
| Device->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &DevicePath, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| ASSERT (DevicePath == Device->DevicePath); | |
| gBS->UninstallProtocolInterface ( | |
| Device->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| DevicePath | |
| ); | |
| FreePool (Device->DevicePath); | |
| } | |
| gBS->UninstallProtocolInterface ( | |
| Controller, | |
| &gEfiCallerIdGuid, | |
| Private | |
| ); | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| FreePool (Private); | |
| return EFI_SUCCESS; | |
| } | |
| AllChildrenStopped = TRUE; | |
| for (Index = 0; Index < NumberOfChildren; Index++) { | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiBlockIoProtocolGuid, | |
| (VOID **) &BlockIo, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiBlockIo2ProtocolGuid, | |
| (VOID **) &BlockIo2, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| AllChildrenStopped = FALSE; | |
| continue; | |
| } | |
| } | |
| if (BlockIo != NULL) { | |
| Partition = EMMC_PARTITION_DATA_FROM_BLKIO (BlockIo); | |
| } else { | |
| ASSERT (BlockIo2 != NULL); | |
| Partition = EMMC_PARTITION_DATA_FROM_BLKIO2 (BlockIo2); | |
| } | |
| for (Link = GetFirstNode (&Partition->Queue); | |
| !IsNull (&Partition->Queue, Link); | |
| Link = NextLink) { | |
| NextLink = GetNextNode (&Partition->Queue, Link); | |
| RemoveEntryList (Link); | |
| Request = EMMC_REQUEST_FROM_LINK (Link); | |
| gBS->CloseEvent (Request->Event); | |
| Request->Token->TransactionStatus = EFI_ABORTED; | |
| if (Request->IsEnd) { | |
| gBS->SignalEvent (Request->Token->Event); | |
| } | |
| FreePool (Request); | |
| } | |
| // | |
| // Close the child handle | |
| // | |
| Status = gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index] | |
| ); | |
| Status = gBS->UninstallMultipleProtocolInterfaces ( | |
| ChildHandleBuffer[Index], | |
| &gEfiDevicePathProtocolGuid, | |
| Partition->DevicePath, | |
| &gEfiBlockIoProtocolGuid, | |
| &Partition->BlockIo, | |
| &gEfiBlockIo2ProtocolGuid, | |
| &Partition->BlockIo2, | |
| &gEfiEraseBlockProtocolGuid, | |
| &Partition->EraseBlock, | |
| &gEfiDiskInfoProtocolGuid, | |
| &Partition->DiskInfo, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| AllChildrenStopped = FALSE; | |
| gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID **)&Partition->Device->Private->PassThru, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index], | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| continue; | |
| } | |
| // | |
| // If Storage Security Command Protocol is installed, then uninstall this protocol. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiStorageSecurityCommandProtocolGuid, | |
| (VOID **) &StorageSecurity, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| Status = gBS->UninstallProtocolInterface ( | |
| ChildHandleBuffer[Index], | |
| &gEfiStorageSecurityCommandProtocolGuid, | |
| &Partition->StorageSecurity | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID **) &Partition->Device->Private->PassThru, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index], | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| AllChildrenStopped = FALSE; | |
| continue; | |
| } | |
| } | |
| FreePool (Partition->DevicePath); | |
| } | |
| if (!AllChildrenStopped) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| The user Entry Point for module EmmcDxe. The user code starts with this function. | |
| @param[in] ImageHandle The firmware allocated handle for the EFI image. | |
| @param[in] SystemTable A pointer to the EFI System Table. | |
| @retval EFI_SUCCESS The entry point is executed successfully. | |
| @retval other Some errors occur when executing this entry point. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| InitializeEmmcDxe ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // Install driver model protocol(s). | |
| // | |
| Status = EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gEmmcDxeDriverBinding, | |
| ImageHandle, | |
| &gEmmcDxeComponentName, | |
| &gEmmcDxeComponentName2 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| return Status; | |
| } | |