| /** @file | |
| Private Include file for IdeBus PEIM. | |
| Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions | |
| of the BSD License which accompanies this distribution. The | |
| full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _RECOVERY_ATAPI_H_ | |
| #define _RECOVERY_ATAPI_H_ | |
| #include <PiPei.h> | |
| #include <Ppi/BlockIo.h> | |
| #include <Ppi/BlockIo2.h> | |
| #include <Ppi/AtaController.h> | |
| #include <Library/DebugLib.h> | |
| #include <Library/TimerLib.h> | |
| #include <Library/PeimEntryPoint.h> | |
| #include <Library/PeiServicesLib.h> | |
| #include <Library/BaseMemoryLib.h> | |
| #include <Library/IoLib.h> | |
| #include <Library/PeiServicesTablePointerLib.h> | |
| #include <Library/MemoryAllocationLib.h> | |
| #include <Library/PcdLib.h> | |
| #include <IndustryStandard/Atapi.h> | |
| #define MAX_SENSE_KEY_COUNT 6 | |
| #define MAX_IDE_CHANNELS 4 // Ide and Sata Primary, Secondary Channel. | |
| #define MAX_IDE_DEVICES 8 // Ide, Sata Primary, Secondary and Master, Slave device. | |
| typedef enum { | |
| IdePrimary = 0, | |
| IdeSecondary = 1, | |
| IdeMaxChannel = 2 | |
| } EFI_IDE_CHANNEL; | |
| typedef enum { | |
| IdeMaster = 0, | |
| IdeSlave = 1, | |
| IdeMaxDevice = 2 | |
| } EFI_IDE_DEVICE; | |
| // | |
| // IDE Registers | |
| // | |
| typedef union { | |
| UINT16 Command; /* when write */ | |
| UINT16 Status; /* when read */ | |
| } IDE_CMD_OR_STATUS; | |
| typedef union { | |
| UINT16 Error; /* when read */ | |
| UINT16 Feature; /* when write */ | |
| } IDE_ERROR_OR_FEATURE; | |
| typedef union { | |
| UINT16 AltStatus; /* when read */ | |
| UINT16 DeviceControl; /* when write */ | |
| } IDE_ALTSTATUS_OR_DEVICECONTROL; | |
| // | |
| // IDE registers set | |
| // | |
| typedef struct { | |
| UINT16 Data; | |
| IDE_ERROR_OR_FEATURE Reg1; | |
| UINT16 SectorCount; | |
| UINT16 SectorNumber; | |
| UINT16 CylinderLsb; | |
| UINT16 CylinderMsb; | |
| UINT16 Head; | |
| IDE_CMD_OR_STATUS Reg; | |
| IDE_ALTSTATUS_OR_DEVICECONTROL Alt; | |
| UINT16 DriveAddress; | |
| } IDE_BASE_REGISTERS; | |
| typedef struct { | |
| UINTN DevicePosition; | |
| EFI_PEI_BLOCK_IO_MEDIA MediaInfo; | |
| EFI_PEI_BLOCK_IO2_MEDIA MediaInfo2; | |
| } PEI_ATAPI_DEVICE_INFO; | |
| #define ATAPI_BLK_IO_DEV_SIGNATURE SIGNATURE_32 ('a', 'b', 'i', 'o') | |
| typedef struct { | |
| UINTN Signature; | |
| EFI_PEI_RECOVERY_BLOCK_IO_PPI AtapiBlkIo; | |
| EFI_PEI_RECOVERY_BLOCK_IO2_PPI AtapiBlkIo2; | |
| EFI_PEI_PPI_DESCRIPTOR PpiDescriptor; | |
| EFI_PEI_PPI_DESCRIPTOR PpiDescriptor2; | |
| PEI_ATA_CONTROLLER_PPI *AtaControllerPpi; | |
| UINTN DeviceCount; | |
| PEI_ATAPI_DEVICE_INFO DeviceInfo[MAX_IDE_DEVICES]; //for max 8 device | |
| IDE_BASE_REGISTERS IdeIoPortReg[MAX_IDE_CHANNELS]; //for max 4 channel. | |
| } ATAPI_BLK_IO_DEV; | |
| #define PEI_RECOVERY_ATAPI_FROM_BLKIO_THIS(a) CR (a, ATAPI_BLK_IO_DEV, AtapiBlkIo, ATAPI_BLK_IO_DEV_SIGNATURE) | |
| #define PEI_RECOVERY_ATAPI_FROM_BLKIO2_THIS(a) CR (a, ATAPI_BLK_IO_DEV, AtapiBlkIo2, ATAPI_BLK_IO_DEV_SIGNATURE) | |
| #define STALL_1_MILLI_SECOND 1000 // stall 1 ms | |
| #define STALL_1_SECONDS 1000 * STALL_1_MILLI_SECOND | |
| // | |
| // Time Out Value For IDE Device Polling | |
| // | |
| // ATATIMEOUT is used for waiting time out for ATA device | |
| // | |
| #define ATATIMEOUT 1000 // 1 second | |
| // ATAPITIMEOUT is used for waiting operation | |
| // except read and write time out for ATAPI device | |
| // | |
| #define ATAPITIMEOUT 1000 // 1 second | |
| // ATAPILONGTIMEOUT is used for waiting read and | |
| // write operation timeout for ATAPI device | |
| // | |
| #define CDROMLONGTIMEOUT 2000 // 2 seconds | |
| #define ATAPILONGTIMEOUT 5000 // 5 seconds | |
| // | |
| // PEI Recovery Block I/O PPI | |
| // | |
| /** | |
| Gets the count of block I/O devices that one specific block driver detects. | |
| This function is used for getting the count of block I/O devices that one | |
| specific block driver detects. To the PEI ATAPI driver, it returns the number | |
| of all the detected ATAPI devices it detects during the enumeration process. | |
| To the PEI legacy floppy driver, it returns the number of all the legacy | |
| devices it finds during its enumeration process. If no device is detected, | |
| then the function will return zero. | |
| @param[in] PeiServices General-purpose services that are available | |
| to every PEIM. | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI | |
| instance. | |
| @param[out] NumberBlockDevices The number of block I/O devices discovered. | |
| @retval EFI_SUCCESS Operation performed successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiGetNumberOfBlockDevices ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, | |
| OUT UINTN *NumberBlockDevices | |
| ); | |
| /** | |
| Gets a block device's media information. | |
| This function will provide the caller with the specified block device's media | |
| information. If the media changes, calling this function will update the media | |
| information accordingly. | |
| @param[in] PeiServices General-purpose services that are available to every | |
| PEIM | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance. | |
| @param[in] DeviceIndex Specifies the block device to which the function wants | |
| to talk. Because the driver that implements Block I/O | |
| PPIs will manage multiple block devices, the PPIs that | |
| want to talk to a single device must specify the | |
| device index that was assigned during the enumeration | |
| process. This index is a number from one to | |
| NumberBlockDevices. | |
| @param[out] MediaInfo The media information of the specified block media. | |
| The caller is responsible for the ownership of this | |
| data structure. | |
| @retval EFI_SUCCESS Media information about the specified block device | |
| was obtained successfully. | |
| @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware | |
| error. | |
| @retval Others Other failure occurs. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiGetBlockDeviceMediaInfo ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, | |
| IN UINTN DeviceIndex, | |
| OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo | |
| ); | |
| /** | |
| Reads the requested number of blocks from the specified block device. | |
| The function reads the requested number of blocks from the device. All the | |
| blocks are read, or an error is returned. If there is no media in the device, | |
| the function returns EFI_NO_MEDIA. | |
| @param[in] PeiServices General-purpose services that are available to | |
| every PEIM. | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance. | |
| @param[in] DeviceIndex Specifies the block device to which the function wants | |
| to talk. Because the driver that implements Block I/O | |
| PPIs will manage multiple block devices, the PPIs that | |
| want to talk to a single device must specify the device | |
| index that was assigned during the enumeration process. | |
| This index is a number from one to NumberBlockDevices. | |
| @param[in] StartLBA The starting logical block address (LBA) to read from | |
| on the device | |
| @param[in] BufferSize The size of the Buffer in bytes. This number must be | |
| a multiple of the intrinsic block size of the device. | |
| @param[out] Buffer A pointer to the destination buffer for the data. | |
| The caller is responsible for the ownership of the | |
| buffer. | |
| @retval EFI_SUCCESS The data was read correctly from the device. | |
| @retval EFI_DEVICE_ERROR The device reported an error while attempting | |
| to perform the read operation. | |
| @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not | |
| valid, or the buffer is not properly aligned. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of | |
| the intrinsic block size of the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiReadBlocks ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, | |
| IN UINTN DeviceIndex, | |
| IN EFI_PEI_LBA StartLBA, | |
| IN UINTN BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| /** | |
| Gets the count of block I/O devices that one specific block driver detects. | |
| This function is used for getting the count of block I/O devices that one | |
| specific block driver detects. To the PEI ATAPI driver, it returns the number | |
| of all the detected ATAPI devices it detects during the enumeration process. | |
| To the PEI legacy floppy driver, it returns the number of all the legacy | |
| devices it finds during its enumeration process. If no device is detected, | |
| then the function will return zero. | |
| @param[in] PeiServices General-purpose services that are available | |
| to every PEIM. | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI | |
| instance. | |
| @param[out] NumberBlockDevices The number of block I/O devices discovered. | |
| @retval EFI_SUCCESS Operation performed successfully. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiGetNumberOfBlockDevices2 ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, | |
| OUT UINTN *NumberBlockDevices | |
| ); | |
| /** | |
| Gets a block device's media information. | |
| This function will provide the caller with the specified block device's media | |
| information. If the media changes, calling this function will update the media | |
| information accordingly. | |
| @param[in] PeiServices General-purpose services that are available to every | |
| PEIM | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. | |
| @param[in] DeviceIndex Specifies the block device to which the function wants | |
| to talk. Because the driver that implements Block I/O | |
| PPIs will manage multiple block devices, the PPIs that | |
| want to talk to a single device must specify the | |
| device index that was assigned during the enumeration | |
| process. This index is a number from one to | |
| NumberBlockDevices. | |
| @param[out] MediaInfo The media information of the specified block media. | |
| The caller is responsible for the ownership of this | |
| data structure. | |
| @retval EFI_SUCCESS Media information about the specified block device | |
| was obtained successfully. | |
| @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware | |
| error. | |
| @retval Others Other failure occurs. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiGetBlockDeviceMediaInfo2 ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, | |
| IN UINTN DeviceIndex, | |
| OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo | |
| ); | |
| /** | |
| Reads the requested number of blocks from the specified block device. | |
| The function reads the requested number of blocks from the device. All the | |
| blocks are read, or an error is returned. If there is no media in the device, | |
| the function returns EFI_NO_MEDIA. | |
| @param[in] PeiServices General-purpose services that are available to | |
| every PEIM. | |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. | |
| @param[in] DeviceIndex Specifies the block device to which the function wants | |
| to talk. Because the driver that implements Block I/O | |
| PPIs will manage multiple block devices, the PPIs that | |
| want to talk to a single device must specify the device | |
| index that was assigned during the enumeration process. | |
| This index is a number from one to NumberBlockDevices. | |
| @param[in] StartLBA The starting logical block address (LBA) to read from | |
| on the device | |
| @param[in] BufferSize The size of the Buffer in bytes. This number must be | |
| a multiple of the intrinsic block size of the device. | |
| @param[out] Buffer A pointer to the destination buffer for the data. | |
| The caller is responsible for the ownership of the | |
| buffer. | |
| @retval EFI_SUCCESS The data was read correctly from the device. | |
| @retval EFI_DEVICE_ERROR The device reported an error while attempting | |
| to perform the read operation. | |
| @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not | |
| valid, or the buffer is not properly aligned. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of | |
| the intrinsic block size of the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| AtapiReadBlocks2 ( | |
| IN EFI_PEI_SERVICES **PeiServices, | |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, | |
| IN UINTN DeviceIndex, | |
| IN EFI_PEI_LBA StartLBA, | |
| IN UINTN BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| // | |
| // Internal functions | |
| // | |
| /** | |
| Enumerate Atapi devices. | |
| This function is used to enumerate Atatpi device in Ide channel. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device | |
| **/ | |
| VOID | |
| AtapiEnumerateDevices ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev | |
| ); | |
| /** | |
| Detect Atapi devices. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[out] MediaInfo The media information of the specified block media. | |
| @param[out] MediaInfo2 The media information 2 of the specified block media. | |
| @retval TRUE Atapi device exists in specified position. | |
| @retval FALSE Atapi device does not exist in specified position. | |
| **/ | |
| BOOLEAN | |
| DiscoverAtapiDevice ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, | |
| OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 | |
| ); | |
| /** | |
| Detect if an IDE controller exists in specified position. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @retval TRUE The Atapi device exists. | |
| @retval FALSE The Atapi device does not present. | |
| **/ | |
| BOOLEAN | |
| DetectIDEController ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition | |
| ); | |
| /** | |
| Wait specified time interval to poll for BSY bit clear in the Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS BSY bit is cleared in the specified time interval. | |
| @retval EFI_TIMEOUT BSY bit is not cleared in the specified time interval. | |
| **/ | |
| EFI_STATUS | |
| WaitForBSYClear ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Wait specified time interval to poll for DRDY bit set in the Status register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS DRDY bit is set in the specified time interval. | |
| @retval EFI_TIMEOUT DRDY bit is not set in the specified time interval. | |
| **/ | |
| EFI_STATUS | |
| DRDYReady ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Wait specified time interval to poll for DRQ bit clear in the Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS DRQ bit is cleared in the specified time interval. | |
| @retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval. | |
| **/ | |
| EFI_STATUS | |
| DRQClear ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Wait specified time interval to poll for DRQ bit clear in the Alternate Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS DRQ bit is cleared in the specified time interval. | |
| @retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval. | |
| **/ | |
| EFI_STATUS | |
| DRQClear2 ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Wait specified time interval to poll for DRQ bit set in the Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS DRQ bit is set in the specified time interval. | |
| @retval EFI_TIMEOUT DRQ bit is not set in the specified time interval. | |
| @retval EFI_ABORTED Operation Aborted. | |
| **/ | |
| EFI_STATUS | |
| DRQReady ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Wait specified time interval to poll for DRQ bit set in the Alternate Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] IdeIoRegisters A pointer to IDE IO registers. | |
| @param[in] TimeoutInMilliSeconds Time specified in milliseconds. | |
| @retval EFI_SUCCESS DRQ bit is set in the specified time interval. | |
| @retval EFI_TIMEOUT DRQ bit is not set in the specified time interval. | |
| @retval EFI_ABORTED Operation Aborted. | |
| **/ | |
| EFI_STATUS | |
| DRQReady2 ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN IDE_BASE_REGISTERS *IdeIoRegisters, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Check if there is an error in Status Register. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] StatusReg The address to IDE IO registers. | |
| @retval EFI_SUCCESS Operation success. | |
| @retval EFI_DEVICE_ERROR Device error. | |
| **/ | |
| EFI_STATUS | |
| CheckErrorStatus ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINT16 StatusReg | |
| ); | |
| /** | |
| Idendify Atapi devices. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @retval EFI_SUCCESS Identify successfully. | |
| @retval EFI_DEVICE_ERROR Device cannot be identified successfully. | |
| **/ | |
| EFI_STATUS | |
| ATAPIIdentify ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition | |
| ); | |
| /** | |
| Sends out ATAPI Test Unit Ready Packet Command to the specified device | |
| to find out whether device is accessible. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @retval EFI_SUCCESS TestUnit command executed successfully. | |
| @retval EFI_DEVICE_ERROR Device cannot be executed TestUnit command successfully. | |
| **/ | |
| EFI_STATUS | |
| TestUnitReady ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition | |
| ) ; | |
| /** | |
| Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in] Packet A pointer to ATAPI command packet. | |
| @param[in] Buffer Buffer to contain requested transfer data from device. | |
| @param[in] ByteCount Requested transfer data length. | |
| @param[in] TimeoutInMilliSeconds Time out value, in unit of milliseconds. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Device cannot be executed command successfully. | |
| **/ | |
| EFI_STATUS | |
| AtapiPacketCommandIn ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN ATAPI_PACKET_COMMAND *Packet, | |
| IN UINT16 *Buffer, | |
| IN UINT32 ByteCount, | |
| IN UINTN TimeoutInMilliSeconds | |
| ); | |
| /** | |
| Sends out ATAPI Inquiry Packet Command to the specified device. | |
| This command will return INQUIRY data of the device. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[out] MediaInfo The media information of the specified block media. | |
| @param[out] MediaInfo2 The media information 2 of the specified block media. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Device cannot be executed command successfully. | |
| @retval EFI_UNSUPPORTED Unsupported device type. | |
| **/ | |
| EFI_STATUS | |
| Inquiry ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, | |
| OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 | |
| ); | |
| /** | |
| Used before read/write blocks from/to ATAPI device media. | |
| Since ATAPI device media is removable, it is necessary to detect | |
| whether media is present and get current present media's information. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in, out] MediaInfo The media information of the specified block media. | |
| @param[in, out] MediaInfo2 The media information 2 of the specified block media. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Some device errors happen. | |
| @retval EFI_OUT_OF_RESOURCES Can not allocate required resources. | |
| **/ | |
| EFI_STATUS | |
| DetectMedia ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, | |
| IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 | |
| ); | |
| /** | |
| Reset specified Atapi device. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in] Extensive If TRUE, use ATA soft reset, otherwise use Atapi soft reset. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Some device errors happen. | |
| **/ | |
| EFI_STATUS | |
| ResetDevice ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN BOOLEAN Extensive | |
| ); | |
| /** | |
| Sends out ATAPI Request Sense Packet Command to the specified device. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in] SenseBuffers Pointer to sense buffer. | |
| @param[in, out] SenseCounts Length of sense buffer. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Some device errors happen. | |
| **/ | |
| EFI_STATUS | |
| RequestSense ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN ATAPI_REQUEST_SENSE_DATA *SenseBuffers, | |
| IN OUT UINT8 *SenseCounts | |
| ); | |
| /** | |
| Sends out ATAPI Read Capacity Packet Command to the specified device. | |
| This command will return the information regarding the capacity of the | |
| media in the device. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in, out] MediaInfo The media information of the specified block media. | |
| @param[in, out] MediaInfo2 The media information 2 of the specified block media. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Some device errors happen. | |
| **/ | |
| EFI_STATUS | |
| ReadCapacity ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, | |
| IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 | |
| ); | |
| /** | |
| Perform read from disk in block unit. | |
| @param[in] AtapiBlkIoDev A pointer to atapi block IO device. | |
| @param[in] DevicePosition An integer to signify device position. | |
| @param[in] Buffer Buffer to contain read data. | |
| @param[in] StartLba Starting LBA address. | |
| @param[in] NumberOfBlocks Number of blocks to read. | |
| @param[in] BlockSize Size of each block. | |
| @retval EFI_SUCCESS Command executed successfully. | |
| @retval EFI_DEVICE_ERROR Some device errors happen. | |
| **/ | |
| EFI_STATUS | |
| ReadSectors ( | |
| IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, | |
| IN UINTN DevicePosition, | |
| IN VOID *Buffer, | |
| IN EFI_PEI_LBA StartLba, | |
| IN UINTN NumberOfBlocks, | |
| IN UINTN BlockSize | |
| ); | |
| /** | |
| Check if there is media according to sense data. | |
| @param[in] SenseData Pointer to sense data. | |
| @param[in] SenseCounts Count of sense data. | |
| @retval TRUE No media | |
| @retval FALSE Media exists | |
| **/ | |
| BOOLEAN | |
| IsNoMedia ( | |
| IN ATAPI_REQUEST_SENSE_DATA *SenseData, | |
| IN UINTN SenseCounts | |
| ); | |
| /** | |
| Check if device state is unclear according to sense data. | |
| @param[in] SenseData Pointer to sense data. | |
| @param[in] SenseCounts Count of sense data. | |
| @retval TRUE Device state is unclear | |
| @retval FALSE Device state is clear | |
| **/ | |
| BOOLEAN | |
| IsDeviceStateUnclear ( | |
| IN ATAPI_REQUEST_SENSE_DATA *SenseData, | |
| IN UINTN SenseCounts | |
| ); | |
| /** | |
| Check if there is media error according to sense data. | |
| @param[in] SenseData Pointer to sense data. | |
| @param[in] SenseCounts Count of sense data. | |
| @retval TRUE Media error | |
| @retval FALSE No media error | |
| **/ | |
| BOOLEAN | |
| IsMediaError ( | |
| IN ATAPI_REQUEST_SENSE_DATA *SenseData, | |
| IN UINTN SenseCounts | |
| ); | |
| /** | |
| Check if drive is ready according to sense data. | |
| @param[in] SenseData Pointer to sense data. | |
| @param[in] SenseCounts Count of sense data. | |
| @param[out] NeedRetry Indicate if retry is needed. | |
| @retval TRUE Drive ready | |
| @retval FALSE Drive not ready | |
| **/ | |
| BOOLEAN | |
| IsDriveReady ( | |
| IN ATAPI_REQUEST_SENSE_DATA *SenseData, | |
| IN UINTN SenseCounts, | |
| OUT BOOLEAN *NeedRetry | |
| ); | |
| #endif |