IntelFspPkg/Library/SecFspSecPlatformLibNull/Ia32/Flat32.s

#------------------------------------------------------------------------------
#
# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution.  The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
# Abstract:
#
#  This is the code that goes from real-mode to protected mode.
#  It consumes the reset vector, configures the stack.
#
#------------------------------------------------------------------------------


#
# Contrary to the name, this file contains 16 bit code as well.
#
.text
#----------------------------------------------------------------------------
#
# Procedure:    _ModuleEntryPoint
#
# Input:        None
#
# Output:       None
#
# Destroys:     Assume all registers
#
# Description:
#
#   Transition to non-paged flat-model protected mode from a
#   hard-coded GDT that provides exactly two descriptors.
#   This is a bare bones transition to protected mode only
#   used for a while in PEI and possibly DXE.
#
#   After enabling protected mode, a far jump is executed to
#   transfer to PEI using the newly loaded GDT.
#
# Return:       None
#
#----------------------------------------------------------------------------
ASM_GLOBAL ASM_PFX(_ModuleEntryPoint)
ASM_PFX(_ModuleEntryPoint):

  #
  # Load the GDT table in GdtDesc
  #
  .byte   0x66,0xbe        #movl    $GdtDesc, %esi
  .long   GdtDesc
  
  .byte   0x66,0x2e,0x0f,0x01,0x14   #lgdt    %cs:(%si)

  #
  # Transition to 16 bit protected mode
  #
  .byte   0x0f,0x20,0xc0       #movl    %cr0, %eax                  # Get control register 0
  .byte   0x66,0x83,0xc8,0x03  #orl     $0x0000003, %eax            # Set PE bit (bit #0) & MP bit (bit #1)
  .byte   0x0f,0x22,0xc0       #movl    %eax, %cr0                  # Activate protected mode

  #
  # Now we're in 16 bit protected mode
  # Set up the selectors for 32 bit protected mode entry
  # 
  .byte   0xb8                 #movw    SYS_DATA_SEL, %ax
  .word   SYS_DATA_SEL
  
  .byte   0x8e,0xd8            #movw    %ax, %ds
  .byte   0x8e,0xc0            #movw    %ax, %es
  .byte   0x8e,0xe0            #movw    %ax, %fs
  .byte   0x8e,0xe8            #movw    %ax, %gs
  .byte   0x8e,0xd0            #movw    %ax, %ss

  #
  # Transition to Flat 32 bit protected mode
  # The jump to a far pointer causes the transition to 32 bit mode
  #
  .byte   0x66,0xbe            #movl   ProtectedModeEntryLinearAddress, %esi
  .long   ProtectedModeEntryLinearAddress 
  .byte   0x66,0x2e,0xff,0x2c  #jmp    %cs:(%esi)

#
# Protected mode portion initializes stack, configures cache, and calls C entry point
#

#----------------------------------------------------------------------------
#
# Procedure:    ProtectedModeEntryPoint
#
# Input:        Executing in 32 Bit Protected (flat) mode
#               cs: 0-4GB
#               ds: 0-4GB
#               es: 0-4GB
#               fs: 0-4GB
#               gs: 0-4GB
#               ss: 0-4GB
#
# Output:       This function never returns
#
# Destroys:
#               ecx
#               edi
#               esi
#               esp
#
# Description:
#               Perform any essential early platform initilaisation
#               Setup a stack
#
#----------------------------------------------------------------------------
ProtectedModeEntryPoint:
  #
  # Dummy function. Consume 2 API to make sure they can be linked.
  #
  movl   ASM_PFX(TempRamInitApi), %eax
  movl   ASM_PFX(FspInitApi), %eax
  #
  # Should never return
  #
  jmp     . #'$'

#
# ROM-based Global-Descriptor Table for the PEI Phase
#
.align 16
#
# GDT[0]: 000h: Null entry, never used.
#
.equ   NULL_SEL, . - GDT_BASE         # Selector [0]
GDT_BASE: 
BootGdtTable:   
        .long   0
        .long   0
#
# Linear code segment descriptor
#
.equ     LINEAR_CODE_SEL, . - GDT_BASE         # Selector [08h]
        .word   0xFFFF                      # limit 0FFFFh
        .word   0                           # base 0
        .byte   0
        .byte   0x9B                        # present, ring 0, data, expand-up, not-writable
        .byte   0xCF                        # page-granular, 32-bit
        .byte   0
#
# System data segment descriptor
#
.equ    SYS_DATA_SEL, . - GDT_BASE         # Selector [010h]
        .word   0xFFFF                      # limit 0FFFFh
        .word   0                           # base 0
        .byte   0
        .byte   0x93                        # present, ring 0, data, expand-up, not-writable
        .byte   0xCF                        # page-granular, 32-bit
        .byte   0

.equ            GDT_SIZE, . - BootGdtTable  # Size, in bytes

#
# GDT Descriptor
#
GdtDesc:                                     # GDT descriptor
       .word    GDT_SIZE - 1               
       .long    BootGdtTable        

ProtectedModeEntryLinearAddress:
ProtectedModeEntryLinearOffset:
       .long    ProtectedModeEntryPoint
       .word    LINEAR_CODE_SEL