BeagleBoardPkg/Include/BeagleBoard.h - edk2 - Git at Google

 /** @file
 *  Header defining the BeagleBoard constants (Base addresses, sizes, flags)
 *
 *  Copyright (c) 2011, ARM Limited. All rights reserved.
 *
 *  This program and the accompanying materials
 *  are licensed and made available under the terms and conditions of the BSD License
 *  which accompanies this distribution.  The full text of the license may be found at
 *  http://opensource.org/licenses/bsd-license.php
 *
 *  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
 *
 **/

 #ifndef __BEAGLEBOARD_PLATFORM_H__
 #define __BEAGLEBOARD_PLATFORM_H__

 // DDR attributes
 #define DDR_ATTRIBUTES_CACHED                ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
 #define DDR_ATTRIBUTES_UNCACHED              ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED

 // SoC registers. L3 interconnects
 #define SOC_REGISTERS_L3_PHYSICAL_BASE       0x68000000
 #define SOC_REGISTERS_L3_PHYSICAL_LENGTH     0x08000000
 #define SOC_REGISTERS_L3_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE

 // SoC registers. L4 interconnects
 #define SOC_REGISTERS_L4_PHYSICAL_BASE       0x48000000
 #define SOC_REGISTERS_L4_PHYSICAL_LENGTH     0x08000000
 #define SOC_REGISTERS_L4_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE


 #if 0
 /*******************************************
 // Platform Memory Map
 *******************************************/

 // Can be NOR, DOC, DRAM, SRAM
 #define ARM_EB_REMAP_BASE                     0x00000000
 #define ARM_EB_REMAP_SZ                       0x04000000

 // Motherboard Peripheral and On-chip peripheral
 #define ARM_EB_SMB_MB_ON_CHIP_PERIPH_BASE     0x10000000
 #define ARM_EB_SMB_MB_ON_CHIP_PERIPH_SZ       0x00100000
 #define ARM_EB_BOARD_PERIPH_BASE              0x10000000
 //#define ARM_EB_CHIP_PERIPH_BASE             0x10020000

 // SMC
 #define ARM_EB_SMC_BASE                       0x40000000
 #define ARM_EB_SMC_SZ                         0x20000000

 // NOR Flash 1
 #define ARM_EB_SMB_NOR_BASE                   0x40000000
 #define ARM_EB_SMB_NOR_SZ                     0x04000000 /* 64 MB */
 // DOC Flash
 #define ARM_EB_SMB_DOC_BASE                   0x44000000
 #define ARM_EB_SMB_DOC_SZ                     0x04000000 /* 64 MB */
 // SRAM
 #define ARM_EB_SMB_SRAM_BASE                  0x48000000
 #define ARM_EB_SMB_SRAM_SZ                    0x02000000 /* 32 MB */
 // USB, Ethernet, VRAM
 #define ARM_EB_SMB_PERIPH_BASE                0x4E000000
 //#define ARM_EB_SMB_PERIPH_VRAM              0x4C000000
 #define ARM_EB_SMB_PERIPH_SZ                  0x02000000 /* 32 MB */

 // DRAM
 #define ARM_EB_DRAM_BASE                      0x70000000
 #define ARM_EB_DRAM_SZ                        0x10000000

 // Logic Tile
 #define ARM_EB_LOGIC_TILE_BASE                0xC0000000
 #define ARM_EB_LOGIC_TILE_SZ                  0x40000000

 /*******************************************
 // Motherboard peripherals
 *******************************************/

 // Define MotherBoard SYS flags offsets (from ARM_EB_BOARD_PERIPH_BASE)
 #define ARM_EB_SYS_FLAGS_REG                  (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
 #define ARM_EB_SYS_FLAGS_SET_REG              (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
 #define ARM_EB_SYS_FLAGS_CLR_REG              (ARM_EB_BOARD_PERIPH_BASE + 0x00034)
 #define ARM_EB_SYS_FLAGS_NV_REG               (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
 #define ARM_EB_SYS_FLAGS_NV_SET_REG           (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
 #define ARM_EB_SYS_FLAGS_NV_CLR_REG           (ARM_EB_BOARD_PERIPH_BASE + 0x0003C)
 #define ARM_EB_SYS_CLCD                       (ARM_EB_BOARD_PERIPH_BASE + 0x00050)
 #define ARM_EB_SYS_PROCID0_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x00084)
 #define ARM_EB_SYS_PROCID1_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x00088)
 #define ARM_EB_SYS_CFGDATA_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A0)
 #define ARM_EB_SYS_CFGCTRL_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A4)
 #define ARM_EB_SYS_CFGSTAT_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A8)

 // SP810 Controller
 #define SP810_CTRL_BASE                       (ARM_EB_BOARD_PERIPH_BASE + 0x01000)

 // SYSTRCL Register
 #define ARM_EB_SYSCTRL                        0x10001000

 // Uart0
 #define PL011_CONSOLE_UART_BASE               (ARM_EB_BOARD_PERIPH_BASE + 0x09000)
 #define PL011_CONSOLE_UART_SPEED              115200

 // SP804 Timer Bases
 #define SP804_TIMER0_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x11000)
 #define SP804_TIMER1_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x11020)
 #define SP804_TIMER2_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x12000)
 #define SP804_TIMER3_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x12020)

 // PL301 RTC
 #define PL031_RTC_BASE                        (ARM_EB_BOARD_PERIPH_BASE + 0x17000)

 // Dynamic Memory Controller Base
 #define ARM_EB_DMC_BASE                       0x10018000

 // Static Memory Controller Base
 #define ARM_EB_SMC_CTRL_BASE                  0x10080000

 #define PL111_CLCD_BASE                       0x10020000
 //TODO: FIXME ... Reserved the memory in UEFI !!! Otherwise risk of corruption
 #define PL111_CLCD_VRAM_BASE                  0x78000000

 #define ARM_EB_SYS_OSCCLK4                    0x1000001C


 /*// System Configuration Controller register Base addresses
 //#define ARM_EB_SYS_CFG_CTRL_BASE                0x100E2000
 #define ARM_EB_SYS_CFGRW0_REG                   0x100E2000
 #define ARM_EB_SYS_CFGRW1_REG                   0x100E2004
 #define ARM_EB_SYS_CFGRW2_REG                   0x100E2008

 #define ARM_EB_CFGRW1_REMAP_NOR0                0
 #define ARM_EB_CFGRW1_REMAP_NOR1                (1 << 28)
 #define ARM_EB_CFGRW1_REMAP_EXT_AXI             (1 << 29)
 #define ARM_EB_CFGRW1_REMAP_DRAM                (1 << 30)

 // PL301 Fast AXI Base Address
 #define ARM_EB_FAXI_BASE                        0x100E9000

 // L2x0 Cache Controller Base Address
 //#define ARM_EB_L2x0_CTLR_BASE                   0x1E00A000*/


 // PL031 RTC - Other settings
 #define PL031_PPM_ACCURACY                      300000000

 /*******************************************
 // Interrupt Map
 *******************************************/

 // Timer Interrupts
 #define TIMER01_INTERRUPT_NUM                34
 #define TIMER23_INTERRUPT_NUM                35


 /*******************************************
 // EFI Memory Map in Permanent Memory (DRAM)
 *******************************************/

 // This region is allocated at the bottom of the DRAM. It will be used
 // for fixed address allocations such as Vector Table
 #define ARM_EB_EFI_FIX_ADDRESS_REGION_SZ        SIZE_8MB

 // This region is the memory declared to PEI as permanent memory for PEI
 // and DXE. EFI stacks and heaps will be declared in this region.
 #define ARM_EB_EFI_MEMORY_REGION_SZ             0x1000000
 #endif

 typedef enum {
   REVISION_XM,
   REVISION_UNKNOWN0,
   REVISION_UNKNOWN1,
   REVISION_UNKNOWN2,
   REVISION_UNKNOWN3,
   REVISION_C4,
   REVISION_C123,
   REVISION_AB,
 } BEAGLEBOARD_REVISION;

 #endif
	/** @file
	* Header defining the BeagleBoard constants (Base addresses, sizes, flags)
	*
	* Copyright (c) 2011, ARM Limited. All rights reserved.
	*
	* This program and the accompanying materials
	* are licensed and made available under the terms and conditions of the BSD License
	* which accompanies this distribution. The full text of the license may be found at
	* http://opensource.org/licenses/bsd-license.php
	*
	* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
	*
	**/

	#ifndef __BEAGLEBOARD_PLATFORM_H__
	#define __BEAGLEBOARD_PLATFORM_H__

	// DDR attributes
	#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
	#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED

	// SoC registers. L3 interconnects
	#define SOC_REGISTERS_L3_PHYSICAL_BASE 0x68000000
	#define SOC_REGISTERS_L3_PHYSICAL_LENGTH 0x08000000
	#define SOC_REGISTERS_L3_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE

	// SoC registers. L4 interconnects
	#define SOC_REGISTERS_L4_PHYSICAL_BASE 0x48000000
	#define SOC_REGISTERS_L4_PHYSICAL_LENGTH 0x08000000
	#define SOC_REGISTERS_L4_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE


	#if 0
	/*******************************************
	// Platform Memory Map
	*******************************************/

	// Can be NOR, DOC, DRAM, SRAM
	#define ARM_EB_REMAP_BASE 0x00000000
	#define ARM_EB_REMAP_SZ 0x04000000

	// Motherboard Peripheral and On-chip peripheral
	#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_BASE 0x10000000
	#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_SZ 0x00100000
	#define ARM_EB_BOARD_PERIPH_BASE 0x10000000
	//#define ARM_EB_CHIP_PERIPH_BASE 0x10020000

	// SMC
	#define ARM_EB_SMC_BASE 0x40000000
	#define ARM_EB_SMC_SZ 0x20000000

	// NOR Flash 1
	#define ARM_EB_SMB_NOR_BASE 0x40000000
	#define ARM_EB_SMB_NOR_SZ 0x04000000 /* 64 MB */
	// DOC Flash
	#define ARM_EB_SMB_DOC_BASE 0x44000000
	#define ARM_EB_SMB_DOC_SZ 0x04000000 /* 64 MB */
	// SRAM
	#define ARM_EB_SMB_SRAM_BASE 0x48000000
	#define ARM_EB_SMB_SRAM_SZ 0x02000000 /* 32 MB */
	// USB, Ethernet, VRAM
	#define ARM_EB_SMB_PERIPH_BASE 0x4E000000
	//#define ARM_EB_SMB_PERIPH_VRAM 0x4C000000
	#define ARM_EB_SMB_PERIPH_SZ 0x02000000 /* 32 MB */

	// DRAM
	#define ARM_EB_DRAM_BASE 0x70000000
	#define ARM_EB_DRAM_SZ 0x10000000

	// Logic Tile
	#define ARM_EB_LOGIC_TILE_BASE 0xC0000000
	#define ARM_EB_LOGIC_TILE_SZ 0x40000000

	/*******************************************
	// Motherboard peripherals
	*******************************************/

	// Define MotherBoard SYS flags offsets (from ARM_EB_BOARD_PERIPH_BASE)
	#define ARM_EB_SYS_FLAGS_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
	#define ARM_EB_SYS_FLAGS_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
	#define ARM_EB_SYS_FLAGS_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00034)
	#define ARM_EB_SYS_FLAGS_NV_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
	#define ARM_EB_SYS_FLAGS_NV_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
	#define ARM_EB_SYS_FLAGS_NV_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x0003C)
	#define ARM_EB_SYS_CLCD (ARM_EB_BOARD_PERIPH_BASE + 0x00050)
	#define ARM_EB_SYS_PROCID0_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00084)
	#define ARM_EB_SYS_PROCID1_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00088)
	#define ARM_EB_SYS_CFGDATA_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A0)
	#define ARM_EB_SYS_CFGCTRL_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A4)
	#define ARM_EB_SYS_CFGSTAT_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A8)

	// SP810 Controller
	#define SP810_CTRL_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x01000)

	// SYSTRCL Register
	#define ARM_EB_SYSCTRL 0x10001000

	// Uart0
	#define PL011_CONSOLE_UART_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x09000)
	#define PL011_CONSOLE_UART_SPEED 115200

	// SP804 Timer Bases
	#define SP804_TIMER0_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11000)
	#define SP804_TIMER1_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11020)
	#define SP804_TIMER2_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12000)
	#define SP804_TIMER3_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12020)

	// PL301 RTC
	#define PL031_RTC_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x17000)

	// Dynamic Memory Controller Base
	#define ARM_EB_DMC_BASE 0x10018000

	// Static Memory Controller Base
	#define ARM_EB_SMC_CTRL_BASE 0x10080000

	#define PL111_CLCD_BASE 0x10020000
	//TODO: FIXME ... Reserved the memory in UEFI !!! Otherwise risk of corruption
	#define PL111_CLCD_VRAM_BASE 0x78000000

	#define ARM_EB_SYS_OSCCLK4 0x1000001C


	/*// System Configuration Controller register Base addresses
	//#define ARM_EB_SYS_CFG_CTRL_BASE 0x100E2000
	#define ARM_EB_SYS_CFGRW0_REG 0x100E2000
	#define ARM_EB_SYS_CFGRW1_REG 0x100E2004
	#define ARM_EB_SYS_CFGRW2_REG 0x100E2008

	#define ARM_EB_CFGRW1_REMAP_NOR0 0
	#define ARM_EB_CFGRW1_REMAP_NOR1 (1 << 28)
	#define ARM_EB_CFGRW1_REMAP_EXT_AXI (1 << 29)
	#define ARM_EB_CFGRW1_REMAP_DRAM (1 << 30)

	// PL301 Fast AXI Base Address
	#define ARM_EB_FAXI_BASE 0x100E9000

	// L2x0 Cache Controller Base Address
	//#define ARM_EB_L2x0_CTLR_BASE 0x1E00A000*/


	// PL031 RTC - Other settings
	#define PL031_PPM_ACCURACY 300000000

	/*******************************************
	// Interrupt Map
	*******************************************/

	// Timer Interrupts
	#define TIMER01_INTERRUPT_NUM 34
	#define TIMER23_INTERRUPT_NUM 35


	/*******************************************
	// EFI Memory Map in Permanent Memory (DRAM)
	*******************************************/

	// This region is allocated at the bottom of the DRAM. It will be used
	// for fixed address allocations such as Vector Table
	#define ARM_EB_EFI_FIX_ADDRESS_REGION_SZ SIZE_8MB

	// This region is the memory declared to PEI as permanent memory for PEI
	// and DXE. EFI stacks and heaps will be declared in this region.
	#define ARM_EB_EFI_MEMORY_REGION_SZ 0x1000000
	#endif

	typedef enum {
	REVISION_XM,
	REVISION_UNKNOWN0,
	REVISION_UNKNOWN1,
	REVISION_UNKNOWN2,
	REVISION_UNKNOWN3,
	REVISION_C4,
	REVISION_C123,
	REVISION_AB,
	} BEAGLEBOARD_REVISION;

	#endif