BaseTools/Source/C/VfrCompile/Pccts/NOTES.bcc - edk2 - Git at Google

 March 95
 Version 1.32 of pccts

 At the moment this file is available via anonymous FTP at

         Node: marvin.ecn.purdue.edu
         File: pub/pccts/1.32/NOTES.BCC

 Mail corrections or additions to David Seidel <71333.1575@compuserve.com>
 ===============================================================================
 Notes on Building PCCTS 1.32 with Borland C++

 David Seidel, Innovative Data Concepts Incorporated
 CompuServe: 71333,1575
 Internet:   71333.1575@compuserve.com
             dseidel@delphi.com

 I have gotten ANTLR and DLG to succesfully build with BCC 4.0, but have found
 from experience that ANTLR, in particular, is likely to run out of memory
 with grammars over a certain size, or with larger values for the -k and -ck
 options.  Now that BCC 4.02 and the new Borland Power Pack for DOS is now
 available, I feel that there is no excuse not to build these tools as
 32-bit executables, as they ought to be.

 For people without the Power Pack, the makefiles below should be fairly easily
 modified to build 16-bit real-mode executables, but I don't really recommend
 it.  As an alternative, you might consider the highly regarded DJGPP compiler
 (a DOS port of the Gnu GCC compiler, with a DOS extender included).  Hopefully
 some other PCCTS who has DJGPP can provode whatever advice is necessary.  The
 Watcom compiler is also an excellent possibility (albeit a commercial one),
 and I hope to make available Watcom makefiles in the near future.

 Here are the makefiles I am using.  Both makefiles use a compiler configuration
 file that contains compiler switches such as optimization settings.  I call
 this file bor32.cfg and keep a copy in both the ANTLR and DLG subdirectories.

 ==== File: bor32.cfg (cut here) ===============================================
 -w-
 -RT-
 -x-
 -N-
 -k-
 -d
 -O2-e-l
 -Z
 -D__STDC__=1
 ==== End of file bor32.cfg (cut here) =========================================

 ==== File: antlr\bor32.mak (cut here) =========================================
 #
 #  ANTLR 1.32 Makefile for Borland C++ 4.02 with DPMI 32-bit DOS extender by
 #  David Seidel
 #  Innovative Data Concepts Incorporated
 #  71333.1575@compuserve.com (or) dseidel@delphi.com
 #
 #  Notes:   1. Compiler switches (optimization etc.) are contained in the
 #              file bor32.cfg.
 #           2. This makefile requires Borland C++ 4.02 or greater with
 #              the DOS Power Pack add-on package.
 #           3. Change the BCCDIR macro below to the topmost directory in
 #              which BCC is installed on your system.
 #

 BCCDIR   =  d:\bc4
 CC       =  bcc32
 SET      =  ..\support\set
 PCCTS_H  =  ..\h
 ANTLR    =  ..\bin\antlr
 DLG      =  ..\bin\dlg
 CFLAGS   =  -I$(BCCDIR)\include -I. -I$(SET) -I$(PCCTS_H) -DUSER_ZZSYN \
  +bor32.cfg
 LIBS     =  dpmi32 cw32
 OBJ_EXT  =  obj
 OBJS     =  antlr.obj scan.obj err.obj bits.obj build.obj fset2.obj fset.obj \
  gen.obj globals.obj hash.obj lex.obj main.obj misc.obj pred.obj dialog.obj \
  set.obj

 .c.obj:
       $(CC) -c $(CFLAGS) {$&.c }

 antlr.exe: $(OBJS)
    tlink32 @&&|
 -Tpe -ax -c -s -L$(BCCDIR)\lib +
 $(BCCDIR)\lib\c0x32 $**
 $@

 $(LIBS)
 ;
 |
    copy *.exe ..\bin


 # *********** Target list of PC machines ***********
 #
 # Don't worry about the ambiguity messages coming from antlr
 # for making antlr.c etc...  [should be 10 of them, I think]
 #

 # leave this commented out for initial build!
 #antlr.c stdpccts.h parser.dlg tokens.h err.c : antlr.g
 #   $(ANTLR) antlr.g

 antlr.$(OBJ_EXT): antlr.c mode.h tokens.h

 scan.$(OBJ_EXT): scan.c mode.h tokens.h

 # leave this commented out for initial build!
 #scan.c mode.h: parser.dlg
 #   $(DLG) -C2 parser.dlg scan.c

 set.$(OBJ_EXT): $(SET)\set.c
    $(CC) -c $(CFLAGS) $(SET)\set.c

 ==== End of file antlr\bor32.mak (cut here) ===================================

 ==== File: dlg\bor32.mak (cut here) ===========================================
 #
 #  DLG 1.32 Makefile for Borland C++ 4.02 with DPMI 32-bit DOS extender by
 #  David Seidel
 #  Innovative Data Concepts Incorporated
 #  71333.1575@compuserve.com (or) dseidel@delphi.com
 #
 #  Notes:   1. Compiler switches (optimization etc.) are contained in the
 #              file bor32.cfg.
 #           2. This makefile requires Borland C++ 4.02 or greater with
 #              the DOS Power Pack add-on package.
 #           3. Change the BCCDIR macro below to the topmost directory in
 #              which BCC is installed on your system.
 #


 BCCDIR   =  d:\bc4
 CC       =  bcc32
 SET      =  ..\support\set
 PCCTS_H  =  ..\h
 ANTLR    =  ..\bin\antlr
 DLG      =  ..\bin\dlg
 CFLAGS   =  -I$(BCCDIR)\include -I. -I$(SET) -I$(PCCTS_H) -DUSER_ZZSYN \
  +bor32.cfg
 LIBS     =  dpmi32 cw32
 OBJ_EXT  =  obj
 OBJS     =  dlg_p.obj dlg_a.obj main.obj err.obj support.obj \
  output.obj relabel.obj automata.obj set.obj

 .c.obj:
       $(CC) -c $(CFLAGS) {$&.c }

 dlg.exe : $(OBJS)
    tlink32 @&&|
 -Tpe -ax -c -s -L$(BCCDIR)\lib +
 c0x32 $**
 $@

 $(LIBS)
 ;
 |
    copy *.exe ..\bin

 dlg_p.obj:  dlg_p.c

 dlg_a.obj:  dlg_a.c

 main.obj:   main.c

 err.obj:    err.c

 support.obj:   support.c

 output.obj: output.c

 relabel.obj:   relabel.c

 automata.obj:  automata.c

 set.$(OBJ_EXT): $(SET)\set.c
    $(CC) -c $(CFLAGS) $(SET)\set.c

 ==== End of file dlg\bor32.mak (cut here) =====================================
	March 95
	Version 1.32 of pccts

	At the moment this file is available via anonymous FTP at

	Node: marvin.ecn.purdue.edu
	File: pub/pccts/1.32/NOTES.BCC

	Mail corrections or additions to David Seidel <71333.1575@compuserve.com>
	===============================================================================
	Notes on Building PCCTS 1.32 with Borland C++

	David Seidel, Innovative Data Concepts Incorporated
	CompuServe: 71333,1575
	Internet: 71333.1575@compuserve.com
	dseidel@delphi.com

	I have gotten ANTLR and DLG to succesfully build with BCC 4.0, but have found
	from experience that ANTLR, in particular, is likely to run out of memory
	with grammars over a certain size, or with larger values for the -k and -ck
	options. Now that BCC 4.02 and the new Borland Power Pack for DOS is now
	available, I feel that there is no excuse not to build these tools as
	32-bit executables, as they ought to be.

	For people without the Power Pack, the makefiles below should be fairly easily
	modified to build 16-bit real-mode executables, but I don't really recommend
	it. As an alternative, you might consider the highly regarded DJGPP compiler
	(a DOS port of the Gnu GCC compiler, with a DOS extender included). Hopefully
	some other PCCTS who has DJGPP can provode whatever advice is necessary. The
	Watcom compiler is also an excellent possibility (albeit a commercial one),
	and I hope to make available Watcom makefiles in the near future.

	Here are the makefiles I am using. Both makefiles use a compiler configuration
	file that contains compiler switches such as optimization settings. I call
	this file bor32.cfg and keep a copy in both the ANTLR and DLG subdirectories.

	==== File: bor32.cfg (cut here) ===============================================
	-w-
	-RT-
	-x-
	-N-
	-k-
	-d
	-O2-e-l
	-Z
	-D__STDC__=1
	==== End of file bor32.cfg (cut here) =========================================

	==== File: antlr\bor32.mak (cut here) =========================================
	#
	# ANTLR 1.32 Makefile for Borland C++ 4.02 with DPMI 32-bit DOS extender by
	# David Seidel
	# Innovative Data Concepts Incorporated
	# 71333.1575@compuserve.com (or) dseidel@delphi.com
	#
	# Notes: 1. Compiler switches (optimization etc.) are contained in the
	# file bor32.cfg.
	# 2. This makefile requires Borland C++ 4.02 or greater with
	# the DOS Power Pack add-on package.
	# 3. Change the BCCDIR macro below to the topmost directory in
	# which BCC is installed on your system.
	#

	BCCDIR = d:\bc4
	CC = bcc32
	SET = ..\support\set
	PCCTS_H = ..\h
	ANTLR = ..\bin\antlr
	DLG = ..\bin\dlg
	CFLAGS = -I$(BCCDIR)\include -I. -I$(SET) -I$(PCCTS_H) -DUSER_ZZSYN \
	+bor32.cfg
	LIBS = dpmi32 cw32
	OBJ_EXT = obj
	OBJS = antlr.obj scan.obj err.obj bits.obj build.obj fset2.obj fset.obj \
	gen.obj globals.obj hash.obj lex.obj main.obj misc.obj pred.obj dialog.obj \
	set.obj

	.c.obj:
	$(CC) -c $(CFLAGS) {$&.c }

	antlr.exe: $(OBJS)
	tlink32 @&&\|
	-Tpe -ax -c -s -L$(BCCDIR)\lib +
	$(BCCDIR)\lib\c0x32 $**
	$@

	$(LIBS)
	;
	\|
	copy *.exe ..\bin


	# ********* Target list of PC machines *********
	#
	# Don't worry about the ambiguity messages coming from antlr
	# for making antlr.c etc... [should be 10 of them, I think]
	#

	# leave this commented out for initial build!
	#antlr.c stdpccts.h parser.dlg tokens.h err.c : antlr.g
	# $(ANTLR) antlr.g

	antlr.$(OBJ_EXT): antlr.c mode.h tokens.h

	scan.$(OBJ_EXT): scan.c mode.h tokens.h

	# leave this commented out for initial build!
	#scan.c mode.h: parser.dlg
	# $(DLG) -C2 parser.dlg scan.c

	set.$(OBJ_EXT): $(SET)\set.c
	$(CC) -c $(CFLAGS) $(SET)\set.c

	==== End of file antlr\bor32.mak (cut here) ===================================

	==== File: dlg\bor32.mak (cut here) ===========================================
	#
	# DLG 1.32 Makefile for Borland C++ 4.02 with DPMI 32-bit DOS extender by
	# David Seidel
	# Innovative Data Concepts Incorporated
	# 71333.1575@compuserve.com (or) dseidel@delphi.com
	#
	# Notes: 1. Compiler switches (optimization etc.) are contained in the
	# file bor32.cfg.
	# 2. This makefile requires Borland C++ 4.02 or greater with
	# the DOS Power Pack add-on package.
	# 3. Change the BCCDIR macro below to the topmost directory in
	# which BCC is installed on your system.
	#


	BCCDIR = d:\bc4
	CC = bcc32
	SET = ..\support\set
	PCCTS_H = ..\h
	ANTLR = ..\bin\antlr
	DLG = ..\bin\dlg
	CFLAGS = -I$(BCCDIR)\include -I. -I$(SET) -I$(PCCTS_H) -DUSER_ZZSYN \
	+bor32.cfg
	LIBS = dpmi32 cw32
	OBJ_EXT = obj
	OBJS = dlg_p.obj dlg_a.obj main.obj err.obj support.obj \
	output.obj relabel.obj automata.obj set.obj

	.c.obj:
	$(CC) -c $(CFLAGS) {$&.c }

	dlg.exe : $(OBJS)
	tlink32 @&&\|
	-Tpe -ax -c -s -L$(BCCDIR)\lib +
	c0x32 $**
	$@

	$(LIBS)
	;
	\|
	copy *.exe ..\bin

	dlg_p.obj: dlg_p.c

	dlg_a.obj: dlg_a.c

	main.obj: main.c

	err.obj: err.c

	support.obj: support.c

	output.obj: output.c

	relabel.obj: relabel.c

	automata.obj: automata.c

	set.$(OBJ_EXT): $(SET)\set.c
	$(CC) -c $(CFLAGS) $(SET)\set.c

	==== End of file dlg\bor32.mak (cut here) =====================================