| /* opensslconf.h */ | |
| /* WARNING: Generated automatically from opensslconf.h.in by Configure. */ | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| /* OpenSSL was configured with the following options: */ | |
| #ifndef OPENSSL_SYSNAME_UEFI | |
| # define OPENSSL_SYSNAME_UEFI | |
| #endif | |
| #ifndef OPENSSL_DOING_MAKEDEPEND | |
| #ifndef OPENSSL_NO_BF | |
| # define OPENSSL_NO_BF | |
| #endif | |
| #ifndef OPENSSL_NO_CAMELLIA | |
| # define OPENSSL_NO_CAMELLIA | |
| #endif | |
| #ifndef OPENSSL_NO_CAPIENG | |
| # define OPENSSL_NO_CAPIENG | |
| #endif | |
| #ifndef OPENSSL_NO_CAST | |
| # define OPENSSL_NO_CAST | |
| #endif | |
| #ifndef OPENSSL_NO_CMS | |
| # define OPENSSL_NO_CMS | |
| #endif | |
| #ifndef OPENSSL_NO_DEPRECATED | |
| # define OPENSSL_NO_DEPRECATED | |
| #endif | |
| #ifndef OPENSSL_NO_DGRAM | |
| # define OPENSSL_NO_DGRAM | |
| #endif | |
| #ifndef OPENSSL_NO_DSA | |
| # define OPENSSL_NO_DSA | |
| #endif | |
| #ifndef OPENSSL_NO_DYNAMIC_ENGINE | |
| # define OPENSSL_NO_DYNAMIC_ENGINE | |
| #endif | |
| #ifndef OPENSSL_NO_EC | |
| # define OPENSSL_NO_EC | |
| #endif | |
| #ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 | |
| # define OPENSSL_NO_EC_NISTP_64_GCC_128 | |
| #endif | |
| #ifndef OPENSSL_NO_ECDH | |
| # define OPENSSL_NO_ECDH | |
| #endif | |
| #ifndef OPENSSL_NO_ECDSA | |
| # define OPENSSL_NO_ECDSA | |
| #endif | |
| #ifndef OPENSSL_NO_ENGINE | |
| # define OPENSSL_NO_ENGINE | |
| #endif | |
| #ifndef OPENSSL_NO_ENGINES | |
| # define OPENSSL_NO_ENGINES | |
| #endif | |
| #ifndef OPENSSL_NO_FILENAMES | |
| # define OPENSSL_NO_FILENAMES | |
| #endif | |
| #ifndef OPENSSL_NO_FP_API | |
| # define OPENSSL_NO_FP_API | |
| #endif | |
| #ifndef OPENSSL_NO_GMP | |
| # define OPENSSL_NO_GMP | |
| #endif | |
| #ifndef OPENSSL_NO_GOST | |
| # define OPENSSL_NO_GOST | |
| #endif | |
| #ifndef OPENSSL_NO_IDEA | |
| # define OPENSSL_NO_IDEA | |
| #endif | |
| #ifndef OPENSSL_NO_JPAKE | |
| # define OPENSSL_NO_JPAKE | |
| #endif | |
| #ifndef OPENSSL_NO_KRB5 | |
| # define OPENSSL_NO_KRB5 | |
| #endif | |
| #ifndef OPENSSL_NO_LIBUNBOUND | |
| # define OPENSSL_NO_LIBUNBOUND | |
| #endif | |
| #ifndef OPENSSL_NO_LOCKING | |
| # define OPENSSL_NO_LOCKING | |
| #endif | |
| #ifndef OPENSSL_NO_MD2 | |
| # define OPENSSL_NO_MD2 | |
| #endif | |
| #ifndef OPENSSL_NO_MDC2 | |
| # define OPENSSL_NO_MDC2 | |
| #endif | |
| #ifndef OPENSSL_NO_POSIX_IO | |
| # define OPENSSL_NO_POSIX_IO | |
| #endif | |
| #ifndef OPENSSL_NO_PQUEUE | |
| # define OPENSSL_NO_PQUEUE | |
| #endif | |
| #ifndef OPENSSL_NO_RC2 | |
| # define OPENSSL_NO_RC2 | |
| #endif | |
| #ifndef OPENSSL_NO_RC5 | |
| # define OPENSSL_NO_RC5 | |
| #endif | |
| #ifndef OPENSSL_NO_RCS | |
| # define OPENSSL_NO_RCS | |
| #endif | |
| #ifndef OPENSSL_NO_RFC3779 | |
| # define OPENSSL_NO_RFC3779 | |
| #endif | |
| #ifndef OPENSSL_NO_RIPEMD | |
| # define OPENSSL_NO_RIPEMD | |
| #endif | |
| #ifndef OPENSSL_NO_SCRYPT | |
| # define OPENSSL_NO_SCRYPT | |
| #endif | |
| #ifndef OPENSSL_NO_SCT | |
| # define OPENSSL_NO_SCT | |
| #endif | |
| #ifndef OPENSSL_NO_SCTP | |
| # define OPENSSL_NO_SCTP | |
| #endif | |
| #ifndef OPENSSL_NO_SEED | |
| # define OPENSSL_NO_SEED | |
| #endif | |
| #ifndef OPENSSL_NO_SHA0 | |
| # define OPENSSL_NO_SHA0 | |
| #endif | |
| #ifndef OPENSSL_NO_SOCK | |
| # define OPENSSL_NO_SOCK | |
| #endif | |
| #ifndef OPENSSL_NO_SRP | |
| # define OPENSSL_NO_SRP | |
| #endif | |
| #ifndef OPENSSL_NO_SSL_TRACE | |
| # define OPENSSL_NO_SSL_TRACE | |
| #endif | |
| #ifndef OPENSSL_NO_SSL2 | |
| # define OPENSSL_NO_SSL2 | |
| #endif | |
| #ifndef OPENSSL_NO_SSL3 | |
| # define OPENSSL_NO_SSL3 | |
| #endif | |
| #ifndef OPENSSL_NO_STDIO | |
| # define OPENSSL_NO_STDIO | |
| #endif | |
| #ifndef OPENSSL_NO_STORE | |
| # define OPENSSL_NO_STORE | |
| #endif | |
| #ifndef OPENSSL_NO_TS | |
| # define OPENSSL_NO_TS | |
| #endif | |
| #ifndef OPENSSL_NO_UI | |
| # define OPENSSL_NO_UI | |
| #endif | |
| #ifndef OPENSSL_NO_UNIT_TEST | |
| # define OPENSSL_NO_UNIT_TEST | |
| #endif | |
| #ifndef OPENSSL_NO_WEAK_SSL_CIPHERS | |
| # define OPENSSL_NO_WEAK_SSL_CIPHERS | |
| #endif | |
| #ifndef OPENSSL_NO_WHIRLPOOL | |
| # define OPENSSL_NO_WHIRLPOOL | |
| #endif | |
| #endif /* OPENSSL_DOING_MAKEDEPEND */ | |
| #ifndef OPENSSL_NO_ASM | |
| # define OPENSSL_NO_ASM | |
| #endif | |
| #ifndef OPENSSL_NO_ERR | |
| # define OPENSSL_NO_ERR | |
| #endif | |
| #ifndef OPENSSL_NO_HW | |
| # define OPENSSL_NO_HW | |
| #endif | |
| #ifndef OPENSSL_NO_DYNAMIC_ENGINE | |
| # define OPENSSL_NO_DYNAMIC_ENGINE | |
| #endif | |
| /* The OPENSSL_NO_* macros are also defined as NO_* if the application | |
| asks for it. This is a transient feature that is provided for those | |
| who haven't had the time to do the appropriate changes in their | |
| applications. */ | |
| #ifdef OPENSSL_ALGORITHM_DEFINES | |
| # if defined(OPENSSL_NO_BF) && !defined(NO_BF) | |
| # define NO_BF | |
| # endif | |
| # if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA) | |
| # define NO_CAMELLIA | |
| # endif | |
| # if defined(OPENSSL_NO_CAPIENG) && !defined(NO_CAPIENG) | |
| # define NO_CAPIENG | |
| # endif | |
| # if defined(OPENSSL_NO_CAST) && !defined(NO_CAST) | |
| # define NO_CAST | |
| # endif | |
| # if defined(OPENSSL_NO_CMS) && !defined(NO_CMS) | |
| # define NO_CMS | |
| # endif | |
| # if defined(OPENSSL_NO_DEPRECATED) && !defined(NO_DEPRECATED) | |
| # define NO_DEPRECATED | |
| # endif | |
| # if defined(OPENSSL_NO_DGRAM) && !defined(NO_DGRAM) | |
| # define NO_DGRAM | |
| # endif | |
| # if defined(OPENSSL_NO_DSA) && !defined(NO_DSA) | |
| # define NO_DSA | |
| # endif | |
| # if defined(OPENSSL_NO_DYNAMIC_ENGINE) && !defined(NO_DYNAMIC_ENGINE) | |
| # define NO_DYNAMIC_ENGINE | |
| # endif | |
| # if defined(OPENSSL_NO_EC) && !defined(NO_EC) | |
| # define NO_EC | |
| # endif | |
| # if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) | |
| # define NO_EC_NISTP_64_GCC_128 | |
| # endif | |
| # if defined(OPENSSL_NO_ECDH) && !defined(NO_ECDH) | |
| # define NO_ECDH | |
| # endif | |
| # if defined(OPENSSL_NO_ECDSA) && !defined(NO_ECDSA) | |
| # define NO_ECDSA | |
| # endif | |
| # if defined(OPENSSL_NO_ENGINE) && !defined(NO_ENGINE) | |
| # define NO_ENGINE | |
| # endif | |
| # if defined(OPENSSL_NO_ENGINES) && !defined(NO_ENGINES) | |
| # define NO_ENGINES | |
| # endif | |
| # if defined(OPENSSL_NO_FILENAMES) && !defined(NO_FILENAMES) | |
| # define NO_FILENAMES | |
| # endif | |
| # if defined(OPENSSL_NO_FP_API) && !defined(NO_FP_API) | |
| # define NO_FP_API | |
| # endif | |
| # if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) | |
| # define NO_GMP | |
| # endif | |
| # if defined(OPENSSL_NO_GOST) && !defined(NO_GOST) | |
| # define NO_GOST | |
| # endif | |
| # if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA) | |
| # define NO_IDEA | |
| # endif | |
| # if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) | |
| # define NO_JPAKE | |
| # endif | |
| # if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) | |
| # define NO_KRB5 | |
| # endif | |
| # if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND) | |
| # define NO_LIBUNBOUND | |
| # endif | |
| # if defined(OPENSSL_NO_LOCKING) && !defined(NO_LOCKING) | |
| # define NO_LOCKING | |
| # endif | |
| # if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) | |
| # define NO_MD2 | |
| # endif | |
| # if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2) | |
| # define NO_MDC2 | |
| # endif | |
| # if defined(OPENSSL_NO_POSIX_IO) && !defined(NO_POSIX_IO) | |
| # define NO_POSIX_IO | |
| # endif | |
| # if defined(OPENSSL_NO_PQUEUE) && !defined(NO_PQUEUE) | |
| # define NO_PQUEUE | |
| # endif | |
| # if defined(OPENSSL_NO_RC2) && !defined(NO_RC2) | |
| # define NO_RC2 | |
| # endif | |
| # if defined(OPENSSL_NO_RC5) && !defined(NO_RC5) | |
| # define NO_RC5 | |
| # endif | |
| # if defined(OPENSSL_NO_RCS) && !defined(NO_RCS) | |
| # define NO_RCS | |
| # endif | |
| # if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779) | |
| # define NO_RFC3779 | |
| # endif | |
| # if defined(OPENSSL_NO_RIPEMD) && !defined(NO_RIPEMD) | |
| # define NO_RIPEMD | |
| # endif | |
| # if defined(OPENSSL_NO_SCRYPT) && !defined(NO_SCRYPT) | |
| # define NO_SCRYPT | |
| # endif | |
| # if defined(OPENSSL_NO_SCT) && !defined(NO_SCT) | |
| # define NO_SCT | |
| # endif | |
| # if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) | |
| # define NO_SCTP | |
| # endif | |
| # if defined(OPENSSL_NO_SEED) && !defined(NO_SEED) | |
| # define NO_SEED | |
| # endif | |
| # if defined(OPENSSL_NO_SHA0) && !defined(NO_SHA0) | |
| # define NO_SHA0 | |
| # endif | |
| # if defined(OPENSSL_NO_SOCK) && !defined(NO_SOCK) | |
| # define NO_SOCK | |
| # endif | |
| # if defined(OPENSSL_NO_SRP) && !defined(NO_SRP) | |
| # define NO_SRP | |
| # endif | |
| # if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE) | |
| # define NO_SSL_TRACE | |
| # endif | |
| # if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2) | |
| # define NO_SSL2 | |
| # endif | |
| # if defined(OPENSSL_NO_SSL3) && !defined(NO_SSL3) | |
| # define NO_SSL3 | |
| # endif | |
| # if defined(OPENSSL_NO_STDIO) && !defined(NO_STDIO) | |
| # define NO_STDIO | |
| # endif | |
| # if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) | |
| # define NO_STORE | |
| # endif | |
| # if defined(OPENSSL_NO_TS) && !defined(NO_TS) | |
| # define NO_TS | |
| # endif | |
| # if defined(OPENSSL_NO_UI) && !defined(NO_UI) | |
| # define NO_UI | |
| # endif | |
| # if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) | |
| # define NO_UNIT_TEST | |
| # endif | |
| # if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) | |
| # define NO_WEAK_SSL_CIPHERS | |
| # endif | |
| # if defined(OPENSSL_NO_WHIRLPOOL) && !defined(NO_WHIRLPOOL) | |
| # define NO_WHIRLPOOL | |
| # endif | |
| #endif | |
| /* crypto/opensslconf.h.in */ | |
| #ifndef OPENSSL_FILE | |
| #ifdef OPENSSL_NO_FILENAMES | |
| #define OPENSSL_FILE "" | |
| #define OPENSSL_LINE 0 | |
| #else | |
| #define OPENSSL_FILE __FILE__ | |
| #define OPENSSL_LINE __LINE__ | |
| #endif | |
| #endif | |
| /* Generate 80386 code? */ | |
| #undef I386_ONLY | |
| #if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ | |
| #if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) | |
| #define ENGINESDIR "/usr/local/ssl/lib/engines" | |
| #define OPENSSLDIR "/usr/local/ssl" | |
| #endif | |
| #endif | |
| #undef OPENSSL_UNISTD | |
| #define OPENSSL_UNISTD <unistd.h> | |
| #undef OPENSSL_EXPORT_VAR_AS_FUNCTION | |
| #if defined(HEADER_IDEA_H) && !defined(IDEA_INT) | |
| #define IDEA_INT unsigned int | |
| #endif | |
| #if defined(HEADER_MD2_H) && !defined(MD2_INT) | |
| #define MD2_INT unsigned int | |
| #endif | |
| #if defined(HEADER_RC2_H) && !defined(RC2_INT) | |
| /* I need to put in a mod for the alpha - eay */ | |
| #define RC2_INT unsigned int | |
| #endif | |
| #if defined(HEADER_RC4_H) | |
| #if !defined(RC4_INT) | |
| /* using int types make the structure larger but make the code faster | |
| * on most boxes I have tested - up to %20 faster. */ | |
| /* | |
| * I don't know what does "most" mean, but declaring "int" is a must on: | |
| * - Intel P6 because partial register stalls are very expensive; | |
| * - elder Alpha because it lacks byte load/store instructions; | |
| */ | |
| #define RC4_INT unsigned int | |
| #endif | |
| #if !defined(RC4_CHUNK) | |
| /* | |
| * This enables code handling data aligned at natural CPU word | |
| * boundary. See crypto/rc4/rc4_enc.c for further details. | |
| */ | |
| #undef RC4_CHUNK | |
| #endif | |
| #endif | |
| #if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) | |
| /* If this is set to 'unsigned int' on a DEC Alpha, this gives about a | |
| * %20 speed up (longs are 8 bytes, int's are 4). */ | |
| #ifndef DES_LONG | |
| #define DES_LONG unsigned long | |
| #endif | |
| #endif | |
| #if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) && !defined(OPENSSL_SYSNAME_UEFI) | |
| #define CONFIG_HEADER_BN_H | |
| #undef BN_LLONG | |
| /* Should we define BN_DIV2W here? */ | |
| /* Only one for the following should be defined */ | |
| #undef SIXTY_FOUR_BIT_LONG | |
| #undef SIXTY_FOUR_BIT | |
| #define THIRTY_TWO_BIT | |
| #endif | |
| #if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) | |
| #define CONFIG_HEADER_RC4_LOCL_H | |
| /* if this is defined data[i] is used instead of *data, this is a %20 | |
| * speedup on x86 */ | |
| #undef RC4_INDEX | |
| #endif | |
| #if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) | |
| #define CONFIG_HEADER_BF_LOCL_H | |
| #undef BF_PTR | |
| #endif /* HEADER_BF_LOCL_H */ | |
| #if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) | |
| #define CONFIG_HEADER_DES_LOCL_H | |
| #ifndef DES_DEFAULT_OPTIONS | |
| /* the following is tweaked from a config script, that is why it is a | |
| * protected undef/define */ | |
| #ifndef DES_PTR | |
| #undef DES_PTR | |
| #endif | |
| /* This helps C compiler generate the correct code for multiple functional | |
| * units. It reduces register dependancies at the expense of 2 more | |
| * registers */ | |
| #ifndef DES_RISC1 | |
| #undef DES_RISC1 | |
| #endif | |
| #ifndef DES_RISC2 | |
| #undef DES_RISC2 | |
| #endif | |
| #if defined(DES_RISC1) && defined(DES_RISC2) | |
| #error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! | |
| #endif | |
| /* Unroll the inner loop, this sometimes helps, sometimes hinders. | |
| * Very mucy CPU dependant */ | |
| #ifndef DES_UNROLL | |
| #undef DES_UNROLL | |
| #endif | |
| /* These default values were supplied by | |
| * Peter Gutman <pgut001@cs.auckland.ac.nz> | |
| * They are only used if nothing else has been defined */ | |
| #if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) | |
| /* Special defines which change the way the code is built depending on the | |
| CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find | |
| even newer MIPS CPU's, but at the moment one size fits all for | |
| optimization options. Older Sparc's work better with only UNROLL, but | |
| there's no way to tell at compile time what it is you're running on */ | |
| #if defined( __sun ) || defined ( sun ) /* Newer Sparc's */ | |
| # define DES_PTR | |
| # define DES_RISC1 | |
| # define DES_UNROLL | |
| #elif defined( __ultrix ) /* Older MIPS */ | |
| # define DES_PTR | |
| # define DES_RISC2 | |
| # define DES_UNROLL | |
| #elif defined( __osf1__ ) /* Alpha */ | |
| # define DES_PTR | |
| # define DES_RISC2 | |
| #elif defined ( _AIX ) /* RS6000 */ | |
| /* Unknown */ | |
| #elif defined( __hpux ) /* HP-PA */ | |
| /* Unknown */ | |
| #elif defined( __aux ) /* 68K */ | |
| /* Unknown */ | |
| #elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ | |
| # define DES_UNROLL | |
| #elif defined( __sgi ) /* Newer MIPS */ | |
| # define DES_PTR | |
| # define DES_RISC2 | |
| # define DES_UNROLL | |
| #elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ | |
| # define DES_PTR | |
| # define DES_RISC1 | |
| # define DES_UNROLL | |
| #endif /* Systems-specific speed defines */ | |
| #endif | |
| #endif /* DES_DEFAULT_OPTIONS */ | |
| #endif /* HEADER_DES_LOCL_H */ | |
| #ifdef __cplusplus | |
| } | |
| #endif |