| /** @file | |
| * | |
| * Copyright (c) 2011-2015, ARM Limited. All rights reserved. | |
| * | |
| * This program and the accompanying materials | |
| * are licensed and made available under the terms and conditions of the BSD License | |
| * which accompanies this distribution. The full text of the license may be found at | |
| * http://opensource.org/licenses/bsd-license.php | |
| * | |
| * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| * | |
| **/ | |
| #include <Library/ArmLib.h> | |
| #include <Library/PcdLib.h> | |
| #include <Guid/Fdt.h> | |
| #include "LinuxLoader.h" | |
| #define ALIGN32_BELOW(addr) ALIGN_POINTER(addr - 32,32) | |
| #define IS_ADDRESS_IN_REGION(RegionStart, RegionSize, Address) \ | |
| (((UINTN)(RegionStart) <= (UINTN)(Address)) && ((UINTN)(Address) <= ((UINTN)(RegionStart) + (UINTN)(RegionSize)))) | |
| EFI_STATUS | |
| PrepareAtagList ( | |
| IN EFI_PHYSICAL_ADDRESS SystemMemoryBase, | |
| IN CONST CHAR8* CommandLineString, | |
| IN EFI_PHYSICAL_ADDRESS InitrdImage, | |
| IN UINTN InitrdImageSize, | |
| OUT EFI_PHYSICAL_ADDRESS *AtagBase, | |
| OUT UINT32 *AtagSize | |
| ); | |
| STATIC | |
| VOID | |
| PreparePlatformHardware ( | |
| VOID | |
| ) | |
| { | |
| //Note: Interrupts will be disabled by the GIC driver when ExitBootServices() will be called. | |
| // Clean before Disable else the Stack gets corrupted with old data. | |
| ArmCleanDataCache (); | |
| ArmDisableDataCache (); | |
| // Invalidate all the entries that might have snuck in. | |
| ArmInvalidateDataCache (); | |
| // Invalidate and disable the Instruction cache | |
| ArmDisableInstructionCache (); | |
| ArmInvalidateInstructionCache (); | |
| // Turn off MMU | |
| ArmDisableMmu (); | |
| } | |
| STATIC | |
| EFI_STATUS | |
| StartLinux ( | |
| IN EFI_PHYSICAL_ADDRESS SystemMemoryBase, | |
| IN EFI_PHYSICAL_ADDRESS LinuxImage, | |
| IN UINTN LinuxImageSize, | |
| IN EFI_PHYSICAL_ADDRESS KernelParamsAddress, | |
| IN UINTN KernelParamsSize, | |
| IN UINT32 MachineType | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| LINUX_KERNEL LinuxKernel; | |
| // Shut down UEFI boot services. ExitBootServices() will notify every driver that created an event on | |
| // ExitBootServices event. Example the Interrupt DXE driver will disable the interrupts on this event. | |
| Status = ShutdownUefiBootServices (); | |
| if (EFI_ERROR (Status)) { | |
| DEBUG ((EFI_D_ERROR, "ERROR: Can not shutdown UEFI boot services. Status=0x%X\n", Status)); | |
| return Status; | |
| } | |
| // Move the kernel parameters to any address inside the first 1MB. | |
| // This is necessary because the ARM Linux kernel requires | |
| // the FTD / ATAG List to reside entirely inside the first 1MB of | |
| // physical memory. | |
| //Note: There is no requirement on the alignment | |
| if (MachineType != ARM_FDT_MACHINE_TYPE) { | |
| if (((UINTN)KernelParamsAddress > LINUX_ATAG_MAX_OFFSET) && (KernelParamsSize < PcdGet32 (PcdArmLinuxAtagMaxOffset))) { | |
| KernelParamsAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)CopyMem (ALIGN32_BELOW (LINUX_ATAG_MAX_OFFSET - KernelParamsSize), (VOID*)(UINTN)KernelParamsAddress, KernelParamsSize); | |
| } | |
| } else { | |
| if (((UINTN)KernelParamsAddress > LINUX_FDT_MAX_OFFSET) && (KernelParamsSize < PcdGet32 (PcdArmLinuxFdtMaxOffset))) { | |
| KernelParamsAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)CopyMem (ALIGN32_BELOW (LINUX_FDT_MAX_OFFSET - KernelParamsSize), (VOID*)(UINTN)KernelParamsAddress, KernelParamsSize); | |
| } | |
| } | |
| if ((UINTN)LinuxImage > LINUX_KERNEL_MAX_OFFSET) { | |
| //Note: There is no requirement on the alignment | |
| LinuxKernel = (LINUX_KERNEL)CopyMem (ALIGN32_BELOW (LINUX_KERNEL_MAX_OFFSET - LinuxImageSize), (VOID*)(UINTN)LinuxImage, LinuxImageSize); | |
| } else { | |
| LinuxKernel = (LINUX_KERNEL)(UINTN)LinuxImage; | |
| } | |
| // Check if the Linux Image is a uImage | |
| if (*(UINT32*)LinuxKernel == LINUX_UIMAGE_SIGNATURE) { | |
| // Assume the Image Entry Point is just after the uImage header (64-byte size) | |
| LinuxKernel = (LINUX_KERNEL)((UINTN)LinuxKernel + 64); | |
| LinuxImageSize -= 64; | |
| } | |
| // Check there is no overlapping between kernel and its parameters | |
| // We can only assert because it is too late to fallback to UEFI (ExitBootServices has been called). | |
| ASSERT (!IS_ADDRESS_IN_REGION (LinuxKernel, LinuxImageSize, KernelParamsAddress) && | |
| !IS_ADDRESS_IN_REGION (LinuxKernel, LinuxImageSize, KernelParamsAddress + KernelParamsSize)); | |
| // | |
| // Switch off interrupts, caches, mmu, etc | |
| // | |
| PreparePlatformHardware (); | |
| // Register and print out performance information | |
| PERF_END (NULL, "BDS", NULL, 0); | |
| if (PerformanceMeasurementEnabled ()) { | |
| PrintPerformance (); | |
| } | |
| // | |
| // Start the Linux Kernel | |
| // | |
| // Outside BootServices, so can't use Print(); | |
| DEBUG ((EFI_D_ERROR, "\nStarting the kernel:\n\n")); | |
| // Jump to kernel with register set | |
| LinuxKernel ((UINTN)0, MachineType, (UINTN)KernelParamsAddress); | |
| // Kernel should never exit | |
| // After Life services are not provided | |
| ASSERT (FALSE); | |
| // We cannot recover the execution at this stage | |
| while (1); | |
| } | |
| /** | |
| Start a Linux kernel from a Device Path | |
| @param SystemMemoryBase Base of the system memory | |
| @param LinuxKernel Device Path to the Linux Kernel | |
| @param Parameters Linux kernel arguments | |
| @param Fdt Device Path to the Flat Device Tree | |
| @param MachineType ARM machine type value | |
| @retval EFI_SUCCESS All drivers have been connected | |
| @retval EFI_NOT_FOUND The Linux kernel Device Path has not been found | |
| @retval EFI_OUT_OF_RESOURCES There is not enough resource memory to store the matching results. | |
| @retval RETURN_UNSUPPORTED ATAG is not support by this architecture | |
| **/ | |
| EFI_STATUS | |
| BootLinuxAtag ( | |
| IN EFI_PHYSICAL_ADDRESS SystemMemoryBase, | |
| IN EFI_DEVICE_PATH_PROTOCOL* LinuxKernelDevicePath, | |
| IN EFI_DEVICE_PATH_PROTOCOL* InitrdDevicePath, | |
| IN CONST CHAR8* CommandLineArguments, | |
| IN UINTN MachineType | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UINT32 LinuxImageSize; | |
| UINT32 InitrdImageBaseSize = 0; | |
| UINT32 InitrdImageSize = 0; | |
| UINT32 AtagSize; | |
| EFI_PHYSICAL_ADDRESS AtagBase; | |
| EFI_PHYSICAL_ADDRESS LinuxImage; | |
| EFI_PHYSICAL_ADDRESS InitrdImageBase = 0; | |
| EFI_PHYSICAL_ADDRESS InitrdImage = 0; | |
| PERF_START (NULL, "BDS", NULL, 0); | |
| // Load the Linux kernel from a device path | |
| LinuxImage = LINUX_KERNEL_MAX_OFFSET; | |
| Status = BdsLoadImage (LinuxKernelDevicePath, AllocateMaxAddress, &LinuxImage, &LinuxImageSize); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not find Linux kernel.\n"); | |
| return Status; | |
| } | |
| if (InitrdDevicePath) { | |
| // Load the initrd near to the Linux kernel | |
| InitrdImageBase = LINUX_KERNEL_MAX_OFFSET; | |
| Status = BdsLoadImage (InitrdDevicePath, AllocateMaxAddress, &InitrdImageBase, &InitrdImageBaseSize); | |
| if (Status == EFI_OUT_OF_RESOURCES) { | |
| Status = BdsLoadImage (InitrdDevicePath, AllocateAnyPages, &InitrdImageBase, &InitrdImageBaseSize); | |
| } | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not find initrd image.\n"); | |
| goto EXIT_FREE_LINUX; | |
| } | |
| // Check if the initrd is a uInitrd | |
| if (*(UINT32*)((UINTN)InitrdImageBase) == LINUX_UIMAGE_SIGNATURE) { | |
| // Skip the 64-byte image header | |
| InitrdImage = (EFI_PHYSICAL_ADDRESS)((UINTN)InitrdImageBase + 64); | |
| InitrdImageSize = InitrdImageBaseSize - 64; | |
| } else { | |
| InitrdImage = InitrdImageBase; | |
| InitrdImageSize = InitrdImageBaseSize; | |
| } | |
| } | |
| // | |
| // Setup the Linux Kernel Parameters | |
| // | |
| // By setting address=0 we leave the memory allocation to the function | |
| Status = PrepareAtagList (SystemMemoryBase, CommandLineArguments, InitrdImage, InitrdImageSize, &AtagBase, &AtagSize); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Can not prepare ATAG list. Status=0x%X\n", Status); | |
| goto EXIT_FREE_INITRD; | |
| } | |
| return StartLinux (SystemMemoryBase, LinuxImage, LinuxImageSize, AtagBase, AtagSize, MachineType); | |
| EXIT_FREE_INITRD: | |
| if (InitrdDevicePath) { | |
| gBS->FreePages (InitrdImageBase, EFI_SIZE_TO_PAGES (InitrdImageBaseSize)); | |
| } | |
| EXIT_FREE_LINUX: | |
| gBS->FreePages (LinuxImage, EFI_SIZE_TO_PAGES (LinuxImageSize)); | |
| return Status; | |
| } | |
| /** | |
| Start a Linux kernel from a Device Path | |
| @param LinuxKernelDevicePath Device Path to the Linux Kernel | |
| @param InitrdDevicePath Device Path to the Initrd | |
| @param CommandLineArguments Linux command line | |
| @retval EFI_SUCCESS All drivers have been connected | |
| @retval EFI_NOT_FOUND The Linux kernel Device Path has not been found | |
| @retval EFI_OUT_OF_RESOURCES There is not enough resource memory to store the matching results. | |
| **/ | |
| EFI_STATUS | |
| BootLinuxFdt ( | |
| IN EFI_PHYSICAL_ADDRESS SystemMemoryBase, | |
| IN EFI_DEVICE_PATH_PROTOCOL* LinuxKernelDevicePath, | |
| IN EFI_DEVICE_PATH_PROTOCOL* InitrdDevicePath, | |
| IN EFI_DEVICE_PATH_PROTOCOL* FdtDevicePath, | |
| IN CONST CHAR8* CommandLineArguments | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UINT32 LinuxImageSize; | |
| UINT32 InitrdImageBaseSize = 0; | |
| UINT32 InitrdImageSize = 0; | |
| VOID *InstalledFdtBase; | |
| UINT32 FdtBlobSize; | |
| EFI_PHYSICAL_ADDRESS FdtBlobBase; | |
| EFI_PHYSICAL_ADDRESS LinuxImage; | |
| EFI_PHYSICAL_ADDRESS InitrdImageBase = 0; | |
| EFI_PHYSICAL_ADDRESS InitrdImage = 0; | |
| PERF_START (NULL, "BDS", NULL, 0); | |
| // Load the Linux kernel from a device path | |
| LinuxImage = LINUX_KERNEL_MAX_OFFSET; | |
| Status = BdsLoadImage (LinuxKernelDevicePath, AllocateMaxAddress, &LinuxImage, &LinuxImageSize); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not find Linux kernel.\n"); | |
| return Status; | |
| } | |
| if (InitrdDevicePath) { | |
| InitrdImageBase = LINUX_KERNEL_MAX_OFFSET; | |
| Status = BdsLoadImage (InitrdDevicePath, AllocateMaxAddress, &InitrdImageBase, &InitrdImageBaseSize); | |
| if (Status == EFI_OUT_OF_RESOURCES) { | |
| Status = BdsLoadImage (InitrdDevicePath, AllocateAnyPages, &InitrdImageBase, &InitrdImageBaseSize); | |
| } | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not find initrd image.\n"); | |
| goto EXIT_FREE_LINUX; | |
| } | |
| // Check if the initrd is a uInitrd | |
| if (*(UINT32*)((UINTN)InitrdImageBase) == LINUX_UIMAGE_SIGNATURE) { | |
| // Skip the 64-byte image header | |
| InitrdImage = (EFI_PHYSICAL_ADDRESS)((UINTN)InitrdImageBase + 64); | |
| InitrdImageSize = InitrdImageBaseSize - 64; | |
| } else { | |
| InitrdImage = InitrdImageBase; | |
| InitrdImageSize = InitrdImageBaseSize; | |
| } | |
| } | |
| if (FdtDevicePath == NULL) { | |
| // | |
| // Get the FDT from the Configuration Table. | |
| // The FDT will be reloaded in PrepareFdt() to a more appropriate | |
| // location for the Linux Kernel. | |
| // | |
| Status = EfiGetSystemConfigurationTable (&gFdtTableGuid, &InstalledFdtBase); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not get the Device Tree blob (%r).\n", Status); | |
| goto EXIT_FREE_INITRD; | |
| } | |
| FdtBlobBase = (EFI_PHYSICAL_ADDRESS)(UINTN)InstalledFdtBase; | |
| FdtBlobSize = fdt_totalsize (InstalledFdtBase); | |
| } else { | |
| // | |
| // FDT device path explicitly defined. The FDT is relocated later to a | |
| // more appropriate location for the Linux kernel. | |
| // | |
| FdtBlobBase = LINUX_KERNEL_MAX_OFFSET; | |
| Status = BdsLoadImage (FdtDevicePath, AllocateMaxAddress, &FdtBlobBase, &FdtBlobSize); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Did not find Device Tree blob (%r).\n", Status); | |
| goto EXIT_FREE_INITRD; | |
| } | |
| } | |
| // Update the Fdt with the Initrd information. The FDT will increase in size. | |
| // By setting address=0 we leave the memory allocation to the function | |
| Status = PrepareFdt (SystemMemoryBase, CommandLineArguments, InitrdImage, InitrdImageSize, &FdtBlobBase, &FdtBlobSize); | |
| if (EFI_ERROR (Status)) { | |
| Print (L"ERROR: Can not load kernel with FDT. Status=%r\n", Status); | |
| goto EXIT_FREE_FDT; | |
| } | |
| return StartLinux (SystemMemoryBase, LinuxImage, LinuxImageSize, FdtBlobBase, FdtBlobSize, ARM_FDT_MACHINE_TYPE); | |
| EXIT_FREE_FDT: | |
| gBS->FreePages (FdtBlobBase, EFI_SIZE_TO_PAGES (FdtBlobSize)); | |
| EXIT_FREE_INITRD: | |
| if (InitrdDevicePath) { | |
| gBS->FreePages (InitrdImageBase, EFI_SIZE_TO_PAGES (InitrdImageBaseSize)); | |
| } | |
| EXIT_FREE_LINUX: | |
| gBS->FreePages (LinuxImage, EFI_SIZE_TO_PAGES (LinuxImageSize)); | |
| return Status; | |
| } |