| /** @file | |
| Interface routine for Mtftp4. | |
| Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php<BR> | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "Mtftp4Impl.h" | |
| /** | |
| Clean up the MTFTP session to get ready for new operation. | |
| @param Instance The MTFTP session to clean up | |
| @param Result The result to return to the caller who initiated | |
| the operation. | |
| **/ | |
| VOID | |
| Mtftp4CleanOperation ( | |
| IN OUT MTFTP4_PROTOCOL *Instance, | |
| IN EFI_STATUS Result | |
| ) | |
| { | |
| LIST_ENTRY *Entry; | |
| LIST_ENTRY *Next; | |
| MTFTP4_BLOCK_RANGE *Block; | |
| EFI_MTFTP4_TOKEN *Token; | |
| // | |
| // Free various resources. | |
| // | |
| Token = Instance->Token; | |
| if (Token != NULL) { | |
| Token->Status = Result; | |
| if (Token->Event != NULL) { | |
| gBS->SignalEvent (Token->Event); | |
| } | |
| Instance->Token = NULL; | |
| } | |
| ASSERT (Instance->UnicastPort != NULL); | |
| UdpIoCleanIo (Instance->UnicastPort); | |
| if (Instance->LastPacket != NULL) { | |
| NetbufFree (Instance->LastPacket); | |
| Instance->LastPacket = NULL; | |
| } | |
| if (Instance->McastUdpPort != NULL) { | |
| UdpIoFreeIo (Instance->McastUdpPort); | |
| Instance->McastUdpPort = NULL; | |
| } | |
| NET_LIST_FOR_EACH_SAFE (Entry, Next, &Instance->Blocks) { | |
| Block = NET_LIST_USER_STRUCT (Entry, MTFTP4_BLOCK_RANGE, Link); | |
| RemoveEntryList (Entry); | |
| FreePool (Block); | |
| } | |
| ZeroMem (&Instance->RequestOption, sizeof (MTFTP4_OPTION)); | |
| Instance->Operation = 0; | |
| Instance->BlkSize = MTFTP4_DEFAULT_BLKSIZE; | |
| Instance->LastBlock = 0; | |
| Instance->ServerIp = 0; | |
| Instance->ListeningPort = 0; | |
| Instance->ConnectedPort = 0; | |
| Instance->Gateway = 0; | |
| Instance->PacketToLive = 0; | |
| Instance->MaxRetry = 0; | |
| Instance->CurRetry = 0; | |
| Instance->Timeout = 0; | |
| Instance->McastIp = 0; | |
| Instance->McastPort = 0; | |
| Instance->Master = TRUE; | |
| } | |
| /** | |
| Check packet for GetInfo. | |
| GetInfo is implemented with EfiMtftp4ReadFile. It use Mtftp4GetInfoCheckPacket | |
| to inspect the first packet from server, then abort the session. | |
| @param This The MTFTP4 protocol instance | |
| @param Token The user's token | |
| @param PacketLen The length of the packet | |
| @param Packet The received packet. | |
| @retval EFI_ABORTED Abort the ReadFile operation and return. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Mtftp4GetInfoCheckPacket ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_TOKEN *Token, | |
| IN UINT16 PacketLen, | |
| IN EFI_MTFTP4_PACKET *Packet | |
| ) | |
| { | |
| MTFTP4_GETINFO_STATE *State; | |
| EFI_STATUS Status; | |
| UINT16 OpCode; | |
| State = (MTFTP4_GETINFO_STATE *) Token->Context; | |
| OpCode = NTOHS (Packet->OpCode); | |
| // | |
| // Set the GetInfo's return status according to the OpCode. | |
| // | |
| switch (OpCode) { | |
| case EFI_MTFTP4_OPCODE_ERROR: | |
| State->Status = EFI_TFTP_ERROR; | |
| break; | |
| case EFI_MTFTP4_OPCODE_OACK: | |
| State->Status = EFI_SUCCESS; | |
| break; | |
| default: | |
| State->Status = EFI_PROTOCOL_ERROR; | |
| } | |
| // | |
| // Allocate buffer then copy the packet over. Use gBS->AllocatePool | |
| // in case AllocatePool will implements something tricky. | |
| // | |
| Status = gBS->AllocatePool (EfiBootServicesData, PacketLen, (VOID **) State->Packet); | |
| if (EFI_ERROR (Status)) { | |
| State->Status = EFI_OUT_OF_RESOURCES; | |
| return EFI_ABORTED; | |
| } | |
| *(State->PacketLen) = PacketLen; | |
| CopyMem (*(State->Packet), Packet, PacketLen); | |
| return EFI_ABORTED; | |
| } | |
| /** | |
| Check whether the override data is valid. | |
| It will first validate whether the server is a valid unicast. If a gateway | |
| is provided in the Override, it also check that it is a unicast on the | |
| connected network. | |
| @param Instance The MTFTP instance | |
| @param Override The override data to validate. | |
| @retval TRUE The override data is valid | |
| @retval FALSE The override data is invalid | |
| **/ | |
| BOOLEAN | |
| Mtftp4OverrideValid ( | |
| IN MTFTP4_PROTOCOL *Instance, | |
| IN EFI_MTFTP4_OVERRIDE_DATA *Override | |
| ) | |
| { | |
| EFI_MTFTP4_CONFIG_DATA *Config; | |
| IP4_ADDR Ip; | |
| IP4_ADDR Netmask; | |
| IP4_ADDR Gateway; | |
| CopyMem (&Ip, &Override->ServerIp, sizeof (IP4_ADDR)); | |
| if (!NetIp4IsUnicast (NTOHL (Ip), 0)) { | |
| return FALSE; | |
| } | |
| Config = &Instance->Config; | |
| CopyMem (&Gateway, &Override->GatewayIp, sizeof (IP4_ADDR)); | |
| Gateway = NTOHL (Gateway); | |
| if (!Config->UseDefaultSetting && (Gateway != 0)) { | |
| CopyMem (&Netmask, &Config->SubnetMask, sizeof (IP4_ADDR)); | |
| CopyMem (&Ip, &Config->StationIp, sizeof (IP4_ADDR)); | |
| Netmask = NTOHL (Netmask); | |
| Ip = NTOHL (Ip); | |
| if (!NetIp4IsUnicast (Gateway, Netmask) || !IP4_NET_EQUAL (Gateway, Ip, Netmask)) { | |
| return FALSE; | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /** | |
| Poll the UDP to get the IP4 default address, which may be retrieved | |
| by DHCP. | |
| The default time out value is 5 seconds. If IP has retrieved the default address, | |
| the UDP is reconfigured. | |
| @param Instance The Mtftp instance | |
| @param UdpIo The UDP_IO to poll | |
| @param UdpCfgData The UDP configure data to reconfigure the UDP_IO | |
| @retval TRUE The default address is retrieved and UDP is reconfigured. | |
| @retval FALSE Some error occured. | |
| **/ | |
| BOOLEAN | |
| Mtftp4GetMapping ( | |
| IN MTFTP4_PROTOCOL *Instance, | |
| IN UDP_IO *UdpIo, | |
| IN EFI_UDP4_CONFIG_DATA *UdpCfgData | |
| ) | |
| { | |
| MTFTP4_SERVICE *Service; | |
| EFI_IP4_MODE_DATA Ip4Mode; | |
| EFI_UDP4_PROTOCOL *Udp; | |
| EFI_STATUS Status; | |
| ASSERT (Instance->Config.UseDefaultSetting); | |
| Service = Instance->Service; | |
| Udp = UdpIo->Protocol.Udp4; | |
| Status = gBS->SetTimer ( | |
| Service->TimerToGetMap, | |
| TimerRelative, | |
| MTFTP4_TIME_TO_GETMAP * TICKS_PER_SECOND | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return FALSE; | |
| } | |
| while (!EFI_ERROR (gBS->CheckEvent (Service->TimerToGetMap))) { | |
| Udp->Poll (Udp); | |
| if (!EFI_ERROR (Udp->GetModeData (Udp, NULL, &Ip4Mode, NULL, NULL)) && | |
| Ip4Mode.IsConfigured) { | |
| Udp->Configure (Udp, NULL); | |
| return (BOOLEAN) (Udp->Configure (Udp, UdpCfgData) == EFI_SUCCESS); | |
| } | |
| } | |
| return FALSE; | |
| } | |
| /** | |
| Configure the UDP port for unicast receiving. | |
| @param UdpIo The UDP_IO instance | |
| @param Instance The MTFTP session | |
| @retval EFI_SUCCESS The UDP port is successfully configured for the | |
| session to unicast receive. | |
| **/ | |
| EFI_STATUS | |
| Mtftp4ConfigUnicastPort ( | |
| IN UDP_IO *UdpIo, | |
| IN MTFTP4_PROTOCOL *Instance | |
| ) | |
| { | |
| EFI_MTFTP4_CONFIG_DATA *Config; | |
| EFI_UDP4_CONFIG_DATA UdpConfig; | |
| EFI_STATUS Status; | |
| IP4_ADDR Ip; | |
| Config = &Instance->Config; | |
| UdpConfig.AcceptBroadcast = FALSE; | |
| UdpConfig.AcceptPromiscuous = FALSE; | |
| UdpConfig.AcceptAnyPort = FALSE; | |
| UdpConfig.AllowDuplicatePort = FALSE; | |
| UdpConfig.TypeOfService = 0; | |
| UdpConfig.TimeToLive = 64; | |
| UdpConfig.DoNotFragment = FALSE; | |
| UdpConfig.ReceiveTimeout = 0; | |
| UdpConfig.TransmitTimeout = 0; | |
| UdpConfig.UseDefaultAddress = Config->UseDefaultSetting; | |
| UdpConfig.StationAddress = Config->StationIp; | |
| UdpConfig.SubnetMask = Config->SubnetMask; | |
| UdpConfig.StationPort = 0; | |
| UdpConfig.RemotePort = 0; | |
| Ip = HTONL (Instance->ServerIp); | |
| CopyMem (&UdpConfig.RemoteAddress, &Ip, sizeof (EFI_IPv4_ADDRESS)); | |
| Status = UdpIo->Protocol.Udp4->Configure (UdpIo->Protocol.Udp4, &UdpConfig); | |
| if ((Status == EFI_NO_MAPPING) && Mtftp4GetMapping (Instance, UdpIo, &UdpConfig)) { | |
| return EFI_SUCCESS; | |
| } | |
| if (!Config->UseDefaultSetting && !EFI_IP4_EQUAL (&mZeroIp4Addr, &Config->GatewayIp)) { | |
| // | |
| // The station IP address is manually configured and the Gateway IP is not 0. | |
| // Add the default route for this UDP instance. | |
| // | |
| Status = UdpIo->Protocol.Udp4->Routes ( | |
| UdpIo->Protocol.Udp4, | |
| FALSE, | |
| &mZeroIp4Addr, | |
| &mZeroIp4Addr, | |
| &Config->GatewayIp | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| UdpIo->Protocol.Udp4->Configure (UdpIo->Protocol.Udp4, NULL); | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Start the MTFTP session to do the operation, such as read file, | |
| write file, and read directory. | |
| @param This The MTFTP session | |
| @param Token The token than encapsues the user's request. | |
| @param Operation The operation to do | |
| @retval EFI_INVALID_PARAMETER Some of the parameters are invalid. | |
| @retval EFI_NOT_STARTED The MTFTP session hasn't been configured. | |
| @retval EFI_ALREADY_STARTED There is pending operation for the session. | |
| @retval EFI_SUCCESS The operation is successfully started. | |
| **/ | |
| EFI_STATUS | |
| Mtftp4Start ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_TOKEN *Token, | |
| IN UINT16 Operation | |
| ) | |
| { | |
| MTFTP4_PROTOCOL *Instance; | |
| EFI_MTFTP4_OVERRIDE_DATA *Override; | |
| EFI_MTFTP4_CONFIG_DATA *Config; | |
| EFI_TPL OldTpl; | |
| EFI_STATUS Status; | |
| // | |
| // Validate the parameters | |
| // | |
| if ((This == NULL) || (Token == NULL) || (Token->Filename == NULL) || | |
| ((Token->OptionCount != 0) && (Token->OptionList == NULL))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // User must provide at least one method to collect the data for download. | |
| // | |
| if (((Operation == EFI_MTFTP4_OPCODE_RRQ) || (Operation == EFI_MTFTP4_OPCODE_DIR)) && | |
| ((Token->Buffer == NULL) && (Token->CheckPacket == NULL))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // User must provide at least one method to provide the data for upload. | |
| // | |
| if ((Operation == EFI_MTFTP4_OPCODE_WRQ) && | |
| ((Token->Buffer == NULL) && (Token->PacketNeeded == NULL))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = MTFTP4_PROTOCOL_FROM_THIS (This); | |
| Status = EFI_SUCCESS; | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| if (Instance->State != MTFTP4_STATE_CONFIGED) { | |
| Status = EFI_NOT_STARTED; | |
| } | |
| if (Instance->Operation != 0) { | |
| Status = EFI_ACCESS_DENIED; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| // | |
| // Set the Operation now to prevent the application start other | |
| // operations. | |
| // | |
| Instance->Operation = Operation; | |
| Override = Token->OverrideData; | |
| if ((Override != NULL) && !Mtftp4OverrideValid (Instance, Override)) { | |
| Status = EFI_INVALID_PARAMETER; | |
| goto ON_ERROR; | |
| } | |
| if (Token->OptionCount != 0) { | |
| Status = Mtftp4ParseOption ( | |
| Token->OptionList, | |
| Token->OptionCount, | |
| TRUE, | |
| &Instance->RequestOption | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| } | |
| // | |
| // Set the operation parameters from the configuration or override data. | |
| // | |
| Config = &Instance->Config; | |
| Instance->Token = Token; | |
| Instance->BlkSize = MTFTP4_DEFAULT_BLKSIZE; | |
| CopyMem (&Instance->ServerIp, &Config->ServerIp, sizeof (IP4_ADDR)); | |
| Instance->ServerIp = NTOHL (Instance->ServerIp); | |
| Instance->ListeningPort = Config->InitialServerPort; | |
| Instance->ConnectedPort = 0; | |
| CopyMem (&Instance->Gateway, &Config->GatewayIp, sizeof (IP4_ADDR)); | |
| Instance->Gateway = NTOHL (Instance->Gateway); | |
| Instance->MaxRetry = Config->TryCount; | |
| Instance->Timeout = Config->TimeoutValue; | |
| Instance->Master = TRUE; | |
| if (Override != NULL) { | |
| CopyMem (&Instance->ServerIp, &Override->ServerIp, sizeof (IP4_ADDR)); | |
| CopyMem (&Instance->Gateway, &Override->GatewayIp, sizeof (IP4_ADDR)); | |
| Instance->ServerIp = NTOHL (Instance->ServerIp); | |
| Instance->Gateway = NTOHL (Instance->Gateway); | |
| Instance->ListeningPort = Override->ServerPort; | |
| Instance->MaxRetry = Override->TryCount; | |
| Instance->Timeout = Override->TimeoutValue; | |
| } | |
| if (Instance->ListeningPort == 0) { | |
| Instance->ListeningPort = MTFTP4_DEFAULT_SERVER_PORT; | |
| } | |
| if (Instance->MaxRetry == 0) { | |
| Instance->MaxRetry = MTFTP4_DEFAULT_RETRY; | |
| } | |
| if (Instance->Timeout == 0) { | |
| Instance->Timeout = MTFTP4_DEFAULT_TIMEOUT; | |
| } | |
| // | |
| // Config the unicast UDP child to send initial request | |
| // | |
| Status = Mtftp4ConfigUnicastPort (Instance->UnicastPort, Instance); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| // | |
| // Set initial status. | |
| // | |
| Token->Status = EFI_NOT_READY; | |
| // | |
| // Build and send an initial requests | |
| // | |
| if (Operation == EFI_MTFTP4_OPCODE_WRQ) { | |
| Status = Mtftp4WrqStart (Instance, Operation); | |
| } else { | |
| Status = Mtftp4RrqStart (Instance, Operation); | |
| } | |
| gBS->RestoreTPL (OldTpl); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| if (Token->Event != NULL) { | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Return immediately for asynchronous operation or poll the | |
| // instance for synchronous operation. | |
| // | |
| while (Token->Status == EFI_NOT_READY) { | |
| This->Poll (This); | |
| } | |
| return Token->Status; | |
| ON_ERROR: | |
| Mtftp4CleanOperation (Instance, Status); | |
| gBS->RestoreTPL (OldTpl); | |
| return Status; | |
| } | |
| /** | |
| Reads the current operational settings. | |
| The GetModeData()function reads the current operational settings of this | |
| EFI MTFTPv4 Protocol driver instance. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance. | |
| @param ModeData Pointer to storage for the EFI MTFTPv4 Protocol | |
| driver mode data. | |
| @retval EFI_SUCCESS The configuration data was successfully returned. | |
| @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. | |
| @retval EFI_INVALID_PARAMETER This is NULL or ModeData is NULL. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4GetModeData ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| OUT EFI_MTFTP4_MODE_DATA *ModeData | |
| ) | |
| { | |
| MTFTP4_PROTOCOL *Instance; | |
| EFI_TPL OldTpl; | |
| if ((This == NULL) || (ModeData == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| Instance = MTFTP4_PROTOCOL_FROM_THIS (This); | |
| CopyMem(&ModeData->ConfigData, &Instance->Config, sizeof (Instance->Config)); | |
| ModeData->SupportedOptionCount = MTFTP4_SUPPORTED_OPTIONS; | |
| ModeData->SupportedOptoins = (UINT8 **) mMtftp4SupportedOptions; | |
| ModeData->UnsupportedOptionCount = 0; | |
| ModeData->UnsupportedOptoins = NULL; | |
| gBS->RestoreTPL (OldTpl); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Initializes, changes, or resets the default operational setting for this | |
| EFI MTFTPv4 Protocol driver instance. | |
| The Configure() function is used to set and change the configuration data for | |
| this EFI MTFTPv4 Protocol driver instance. The configuration data can be reset | |
| to startup defaults by calling Configure() with MtftpConfigData set to NULL. | |
| Whenever the instance is reset, any pending operation is aborted. By changing | |
| the EFI MTFTPv4 Protocol driver instance configuration data, the client can | |
| connect to different MTFTPv4 servers. The configuration parameters in | |
| MtftpConfigData are used as the default parameters in later MTFTPv4 operations | |
| and can be overridden in later operations. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance | |
| @param ConfigData MtftpConfigDataPointer to the configuration data | |
| structure | |
| @retval EFI_SUCCESS The EFI MTFTPv4 Protocol driver was configured | |
| successfully. | |
| @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: | |
| 1.This is NULL. | |
| 2.MtftpConfigData.UseDefaultSetting is FALSE and | |
| MtftpConfigData.StationIp is not a valid IPv4 | |
| unicast address. | |
| 3.MtftpCofigData.UseDefaultSetting is FALSE and | |
| MtftpConfigData.SubnetMask is invalid. | |
| 4.MtftpCofigData.ServerIp is not a valid IPv4 | |
| unicast address. | |
| 5.MtftpConfigData.UseDefaultSetting is FALSE and | |
| MtftpConfigData.GatewayIp is not a valid IPv4 | |
| unicast address or is not in the same subnet | |
| with station address. | |
| @retval EFI_ACCESS_DENIED The EFI configuration could not be changed at this | |
| time because there is one MTFTP background operation | |
| in progress. | |
| @retval EFI_NO_MAPPING When using a default address, configuration | |
| (DHCP, BOOTP, RARP, etc.) has not finished yet. | |
| @retval EFI_UNSUPPORTED A configuration protocol (DHCP, BOOTP, RARP, etc.) | |
| could not be located when clients choose to use | |
| the default address settings. | |
| @retval EFI_OUT_OF_RESOURCES The EFI MTFTPv4 Protocol driver instance data could | |
| not be allocated. | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| The EFI MTFTPv4 Protocol driver instance is not | |
| configured. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4Configure ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_CONFIG_DATA *ConfigData | |
| ) | |
| { | |
| MTFTP4_PROTOCOL *Instance; | |
| EFI_TPL OldTpl; | |
| IP4_ADDR Ip; | |
| IP4_ADDR Netmask; | |
| IP4_ADDR Gateway; | |
| IP4_ADDR ServerIp; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = MTFTP4_PROTOCOL_FROM_THIS (This); | |
| if (ConfigData == NULL) { | |
| // | |
| // Reset the operation if ConfigData is NULL | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| Mtftp4CleanOperation (Instance, EFI_ABORTED); | |
| ZeroMem (&Instance->Config, sizeof (EFI_MTFTP4_CONFIG_DATA)); | |
| Instance->State = MTFTP4_STATE_UNCONFIGED; | |
| gBS->RestoreTPL (OldTpl); | |
| } else { | |
| // | |
| // Configure the parameters for new operation. | |
| // | |
| CopyMem (&Ip, &ConfigData->StationIp, sizeof (IP4_ADDR)); | |
| CopyMem (&Netmask, &ConfigData->SubnetMask, sizeof (IP4_ADDR)); | |
| CopyMem (&Gateway, &ConfigData->GatewayIp, sizeof (IP4_ADDR)); | |
| CopyMem (&ServerIp, &ConfigData->ServerIp, sizeof (IP4_ADDR)); | |
| Ip = NTOHL (Ip); | |
| Netmask = NTOHL (Netmask); | |
| Gateway = NTOHL (Gateway); | |
| ServerIp = NTOHL (ServerIp); | |
| if (!NetIp4IsUnicast (ServerIp, 0)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!ConfigData->UseDefaultSetting && | |
| ((!IP4_IS_VALID_NETMASK (Netmask) || !NetIp4IsUnicast (Ip, Netmask)))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Gateway != 0) && | |
| (!IP4_NET_EQUAL (Gateway, Ip, Netmask) || !NetIp4IsUnicast (Gateway, Netmask))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| if ((Instance->State == MTFTP4_STATE_CONFIGED) && (Instance->Operation != 0)) { | |
| gBS->RestoreTPL (OldTpl); | |
| return EFI_ACCESS_DENIED; | |
| } | |
| CopyMem(&Instance->Config, ConfigData, sizeof (*ConfigData));; | |
| Instance->State = MTFTP4_STATE_CONFIGED; | |
| gBS->RestoreTPL (OldTpl); | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Parses the options in an MTFTPv4 OACK packet. | |
| The ParseOptions() function parses the option fields in an MTFTPv4 OACK packet | |
| and returns the number of options that were found and optionally a list of | |
| pointers to the options in the packet. | |
| If one or more of the option fields are not valid, then EFI_PROTOCOL_ERROR is | |
| returned and *OptionCount and *OptionList stop at the last valid option. | |
| The OptionList is allocated by this function, and caller should free it when used. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance. | |
| @param PacketLen Length of the OACK packet to be parsed. | |
| @param Packet Pointer to the OACK packet to be parsed. | |
| @param OptionCount Pointer to the number of options in following OptionList. | |
| @param OptionList Pointer to EFI_MTFTP4_OPTION storage. Call the | |
| EFI Boot Service FreePool() to release theOptionList | |
| if the options in this OptionList are not needed | |
| any more | |
| @retval EFI_SUCCESS The OACK packet was valid and the OptionCount and | |
| OptionList parameters have been updated. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| 1.PacketLen is 0. | |
| 2.Packet is NULL or Packet is not a valid MTFTPv4 packet. | |
| 3.OptionCount is NULL. | |
| @retval EFI_NOT_FOUND No options were found in the OACK packet. | |
| @retval EFI_OUT_OF_RESOURCES Storage for the OptionList array cannot be allocated. | |
| @retval EFI_PROTOCOL_ERROR One or more of the option fields is invalid. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4ParseOptions ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN UINT32 PacketLen, | |
| IN EFI_MTFTP4_PACKET *Packet, | |
| OUT UINT32 *OptionCount, | |
| OUT EFI_MTFTP4_OPTION **OptionList OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| if ((This == NULL) || (PacketLen < MTFTP4_OPCODE_LEN) || | |
| (Packet == NULL) || (OptionCount == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Status = Mtftp4ExtractOptions (Packet, PacketLen, OptionCount, OptionList); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| if (*OptionCount == 0) { | |
| return EFI_NOT_FOUND; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| Downloads a file from an MTFTPv4 server. | |
| The ReadFile() function is used to initialize and start an MTFTPv4 download | |
| process and optionally wait for completion. When the download operation completes, | |
| whether successfully or not, the Token.Status field is updated by the EFI MTFTPv4 | |
| Protocol driver and then Token.Event is signaled (if it is not NULL). | |
| Data can be downloaded from the MTFTPv4 server into either of the following locations: | |
| 1.A fixed buffer that is pointed to by Token.Buffer | |
| 2.A download service function that is pointed to by Token.CheckPacket | |
| If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket | |
| will be called first. If the call is successful, the packet will be stored in | |
| Token.Buffer. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance | |
| @param Token Pointer to the token structure to provide the | |
| parameters that are used in this operation. | |
| @retval EFI_SUCCESS The data file has been transferred successfully. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_BUFFER_TOO_SMALL BufferSize is not large enough to hold the downloaded | |
| data in downloading process. | |
| @retval EFI_ABORTED Current operation is aborted by user. | |
| @retval EFI_ICMP_ERROR An ICMP ERROR packet was received. | |
| @retval EFI_TIMEOUT No responses were received from the MTFTPv4 server. | |
| @retval EFI_TFTP_ERROR An MTFTPv4 ERROR packet was received. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| @retval EFI_NO_MEDIA There was a media error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4ReadFile ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_TOKEN *Token | |
| ) | |
| { | |
| return Mtftp4Start (This, Token, EFI_MTFTP4_OPCODE_RRQ); | |
| } | |
| /** | |
| Sends a data file to an MTFTPv4 server. May be unsupported in some EFI implementations | |
| The WriteFile() function is used to initialize an uploading operation with the | |
| given option list and optionally wait for completion. If one or more of the | |
| options is not supported by the server, the unsupported options are ignored and | |
| a standard TFTP process starts instead. When the upload process completes, | |
| whether successfully or not, Token.Event is signaled, and the EFI MTFTPv4 Protocol | |
| driver updates Token.Status. | |
| The caller can supply the data to be uploaded in the following two modes: | |
| 1.Through the user-provided buffer | |
| 2.Through a callback function | |
| With the user-provided buffer, the Token.BufferSize field indicates the length | |
| of the buffer, and the driver will upload the data in the buffer. With an | |
| EFI_MTFTP4_PACKET_NEEDED callback function, the driver will call this callback | |
| function to get more data from the user to upload. See the definition of | |
| EFI_MTFTP4_PACKET_NEEDED for more information. These two modes cannot be used at | |
| the same time. The callback function will be ignored if the user provides the buffer. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance. | |
| @param Token Pointer to the token structure to provide the | |
| parameters that are used in this function | |
| @retval EFI_SUCCESS The upload session has started. | |
| @retval EFI_UNSUPPORTED The operation is not supported by this implementation. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| 1. This is NULL. | |
| 2. Token is NULL. | |
| 3. Token.Filename is NULL. | |
| 4. Token.OptionCount is not zero and | |
| Token.OptionList is NULL. | |
| 5. One or more options in Token.OptionList have wrong | |
| format. | |
| 6. Token.Buffer and Token.PacketNeeded are both | |
| NULL. | |
| 7. One or more IPv4 addresses in Token.OverrideData | |
| are not valid unicast IPv4 addresses if | |
| Token.OverrideData is not NULL. | |
| @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are in the | |
| unsupported list of structure EFI_MTFTP4_MODE_DATA. | |
| @retval EFI_NOT_STARTED The EFI MTFTPv4 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, | |
| BOOTP, RARP, etc.) is not finished yet. | |
| @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv4 | |
| session. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4WriteFile ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_TOKEN *Token | |
| ) | |
| { | |
| return Mtftp4Start (This, Token, EFI_MTFTP4_OPCODE_WRQ); | |
| } | |
| /** | |
| Downloads a data file "directory" from an MTFTPv4 server. | |
| May be unsupported in some EFI implementations | |
| The ReadDirectory() function is used to return a list of files on the MTFTPv4 | |
| server that are logically (or operationally) related to Token.Filename. The | |
| directory request packet that is sent to the server is built with the option | |
| list that was provided by caller, if present. | |
| The file information that the server returns is put into either of the following | |
| locations: | |
| 1.A fixed buffer that is pointed to by Token.Buffer | |
| 2.A download service function that is pointed to by Token.CheckPacket | |
| If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket will | |
| be called first. If the call is successful, the packet will be stored in Token.Buffer. | |
| The returned directory listing in the Token.Buffer or EFI_MTFTP4_PACKET consists | |
| of a list of two or three variable-length ASCII strings, each terminated by a | |
| null character, for each file in the directory. If the multicast option is involved, | |
| the first field of each directory entry is the static multicast IP address and | |
| UDP port number that is associated with the file name. The format of the field | |
| is ip:ip:ip:ip:port. If the multicast option is not involved, this field and its | |
| terminating null character are not present. | |
| The next field of each directory entry is the file name and the last field is | |
| the file information string. The information string contains the file size and | |
| the create/modify timestamp. The format of the information string is filesize | |
| yyyy-mm-dd hh:mm:ss:ffff. The timestamp is Coordinated Universal Time | |
| (UTC; also known as Greenwich Mean Time [GMT]). | |
| The only difference between ReadFile and ReadDirectory is the opcode used. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance | |
| @param Token Pointer to the token structure to provide the | |
| parameters that are used in this function | |
| @retval EFI_SUCCESS The MTFTPv4 related file "directory" has been downloaded. | |
| @retval EFI_UNSUPPORTED The operation is not supported by this implementation. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| 1. This is NULL. | |
| 2. Token is NULL. | |
| 3. Token.Filename is NULL. | |
| 4. Token.OptionCount is not zero and | |
| Token.OptionList is NULL. | |
| 5. One or more options in Token.OptionList have wrong | |
| format. | |
| 6. Token.Buffer and Token.PacketNeeded are both | |
| NULL. | |
| 7. One or more IPv4 addresses in Token.OverrideData | |
| are not valid unicast IPv4 addresses if | |
| Token.OverrideData is not NULL. | |
| @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are in the | |
| unsupported list of structure EFI_MTFTP4_MODE_DATA. | |
| @retval EFI_NOT_STARTED The EFI MTFTPv4 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, | |
| BOOTP, RARP, etc.) is not finished yet. | |
| @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv4 | |
| session. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4ReadDirectory ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_TOKEN *Token | |
| ) | |
| { | |
| return Mtftp4Start (This, Token, EFI_MTFTP4_OPCODE_DIR); | |
| } | |
| /** | |
| Gets information about a file from an MTFTPv4 server. | |
| The GetInfo() function assembles an MTFTPv4 request packet with options; | |
| sends it to the MTFTPv4 server; and may return an MTFTPv4 OACK, MTFTPv4 ERROR, | |
| or ICMP ERROR packet. Retries occur only if no response packets are received | |
| from the MTFTPv4 server before the timeout expires. | |
| It is implemented with EfiMtftp4ReadFile: build a token, then pass it to | |
| EfiMtftp4ReadFile. In its check packet callback abort the opertions. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance | |
| @param OverrideData Data that is used to override the existing | |
| parameters. If NULL, the default parameters that | |
| were set in the EFI_MTFTP4_PROTOCOL.Configure() | |
| function are used | |
| @param Filename Pointer to ASCIIZ file name string | |
| @param ModeStr Pointer to ASCIIZ mode string. If NULL, "octet" | |
| will be used | |
| @param OptionCount Number of option/value string pairs in OptionList | |
| @param OptionList Pointer to array of option/value string pairs. | |
| Ignored if OptionCount is zero | |
| @param PacketLength The number of bytes in the returned packet | |
| @param Packet PacketThe pointer to the received packet. This | |
| buffer must be freed by the caller. | |
| @retval EFI_SUCCESS An MTFTPv4 OACK packet was received and is in | |
| the Buffer. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| 1.This is NULL. | |
| 2.Filename is NULL. | |
| 3.OptionCount is not zero and OptionList is NULL. | |
| 4.One or more options in OptionList have wrong format. | |
| 5.PacketLength is NULL. | |
| 6.One or more IPv4 addresses in OverrideData are | |
| not valid unicast IPv4 addresses if OverrideData | |
| is not NULL. | |
| @retval EFI_UNSUPPORTED One or more options in the OptionList are in the | |
| unsupported list of structure EFI_MTFTP4_MODE_DATA | |
| @retval EFI_NOT_STARTED The EFI MTFTPv4 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, | |
| BOOTP, RARP, etc.) has not finished yet. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_TFTP_ERROR An MTFTPv4 ERROR packet was received and is in | |
| the Buffer. | |
| @retval EFI_ICMP_ERROR An ICMP ERROR packet was received and the Packet | |
| is set to NULL. | |
| @retval EFI_PROTOCOL_ERROR An unexpected MTFTPv4 packet was received and is | |
| in the Buffer. | |
| @retval EFI_TIMEOUT No responses were received from the MTFTPv4 server. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| @retval EFI_NO_MEDIA There was a media error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4GetInfo ( | |
| IN EFI_MTFTP4_PROTOCOL *This, | |
| IN EFI_MTFTP4_OVERRIDE_DATA *OverrideData OPTIONAL, | |
| IN UINT8 *Filename, | |
| IN UINT8 *ModeStr OPTIONAL, | |
| IN UINT8 OptionCount, | |
| IN EFI_MTFTP4_OPTION *OptionList OPTIONAL, | |
| OUT UINT32 *PacketLength, | |
| OUT EFI_MTFTP4_PACKET **Packet OPTIONAL | |
| ) | |
| { | |
| EFI_MTFTP4_TOKEN Token; | |
| MTFTP4_GETINFO_STATE State; | |
| EFI_STATUS Status; | |
| if ((This == NULL) || (Filename == NULL) || (PacketLength == NULL) || | |
| ((OptionCount != 0) && (OptionList == NULL))) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (Packet != NULL) { | |
| *Packet = NULL; | |
| } | |
| *PacketLength = 0; | |
| State.Packet = Packet; | |
| State.PacketLen = PacketLength; | |
| State.Status = EFI_SUCCESS; | |
| // | |
| // Fill in the Token to issue an synchronous ReadFile operation | |
| // | |
| Token.Status = EFI_SUCCESS; | |
| Token.Event = NULL; | |
| Token.OverrideData = OverrideData; | |
| Token.Filename = Filename; | |
| Token.ModeStr = ModeStr; | |
| Token.OptionCount = OptionCount; | |
| Token.OptionList = OptionList; | |
| Token.BufferSize = 0; | |
| Token.Buffer = NULL; | |
| Token.Context = &State; | |
| Token.CheckPacket = Mtftp4GetInfoCheckPacket; | |
| Token.TimeoutCallback = NULL; | |
| Token.PacketNeeded = NULL; | |
| Status = EfiMtftp4ReadFile (This, &Token); | |
| if (EFI_ABORTED == Status) { | |
| return State.Status; | |
| } | |
| return Status; | |
| } | |
| /** | |
| Polls for incoming data packets and processes outgoing data packets. | |
| The Poll() function can be used by network drivers and applications to increase | |
| the rate that data packets are moved between the communications device and the | |
| transmit and receive queues. | |
| In some systems, the periodic timer event in the managed network driver may not | |
| poll the underlying communications device fast enough to transmit and/or receive | |
| all data packets without missing incoming packets or dropping outgoing packets. | |
| Drivers and applications that are experiencing packet loss should try calling | |
| the Poll() function more often. | |
| @param This Pointer to the EFI_MTFTP4_PROTOCOL instance | |
| @retval EFI_SUCCESS Incoming or outgoing data was processed. | |
| @retval EFI_NOT_STARTED This EFI MTFTPv4 Protocol instance has not been started. | |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, | |
| BOOTP, RARP, etc.) is not finished yet. | |
| @retval EFI_INVALID_PARAMETER This is NULL. | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive | |
| queue. Consider increasing the polling rate. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| EfiMtftp4Poll ( | |
| IN EFI_MTFTP4_PROTOCOL *This | |
| ) | |
| { | |
| MTFTP4_PROTOCOL *Instance; | |
| EFI_UDP4_PROTOCOL *Udp; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = MTFTP4_PROTOCOL_FROM_THIS (This); | |
| if (Instance->State == MTFTP4_STATE_UNCONFIGED) { | |
| return EFI_NOT_STARTED; | |
| } else if (Instance->State == MTFTP4_STATE_DESTORY) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Udp = Instance->UnicastPort->Protocol.Udp4; | |
| return Udp->Poll (Udp); | |
| } | |
| EFI_MTFTP4_PROTOCOL gMtftp4ProtocolTemplate = { | |
| EfiMtftp4GetModeData, | |
| EfiMtftp4Configure, | |
| EfiMtftp4GetInfo, | |
| EfiMtftp4ParseOptions, | |
| EfiMtftp4ReadFile, | |
| EfiMtftp4WriteFile, | |
| EfiMtftp4ReadDirectory, | |
| EfiMtftp4Poll | |
| }; |