QuarkSocPkg/QuarkNorthCluster/Include/QNCCommonDefinitions.h

/** @file
This header file provides common definitions just for MCH using to avoid including extra module's file.

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _QNC_COMMON_DEFINITIONS_H_
#define _QNC_COMMON_DEFINITIONS_H_

//
// PCI CONFIGURATION MAP REGISTER OFFSETS
//
#ifndef PCI_VID
#define PCI_VID             0x0000        // Vendor ID Register
#define PCI_DID             0x0002        // Device ID Register
#define PCI_CMD             0x0004        // PCI Command Register
#define PCI_STS             0x0006        // PCI Status Register
#define PCI_RID             0x0008        // Revision ID Register
#define PCI_IFT             0x0009        // Interface Type
#define PCI_SCC             0x000A        // Sub Class Code Register
#define PCI_BCC             0x000B        // Base Class Code Register
#define PCI_CLS             0x000C        // Cache Line Size
#define PCI_PMLT            0x000D        // Primary Master Latency Timer
#define PCI_HDR             0x000E        // Header Type Register
#define PCI_BIST            0x000F        // Built in Self Test Register
#define PCI_BAR0            0x0010        // Base Address Register 0
#define PCI_BAR1            0x0014        // Base Address Register 1
#define PCI_BAR2            0x0018        // Base Address Register 2
#define PCI_PBUS            0x0018        // Primary Bus Number Register
#define PCI_SBUS            0x0019        // Secondary Bus Number Register
#define PCI_SUBUS           0x001A        // Subordinate Bus Number Register
#define PCI_SMLT            0x001B        // Secondary Master Latency Timer
#define PCI_BAR3            0x001C        // Base Address Register 3
#define PCI_IOBASE          0x001C        // I/O base Register
#define PCI_IOLIMIT         0x001D        // I/O Limit Register
#define PCI_SECSTATUS       0x001E        // Secondary Status Register
#define PCI_BAR4            0x0020        // Base Address Register 4
#define PCI_MEMBASE         0x0020        // Memory Base Register
#define PCI_MEMLIMIT        0x0022        // Memory Limit Register
#define PCI_BAR5            0x0024        // Base Address Register 5
#define PCI_PRE_MEMBASE     0x0024        // Prefetchable memory Base register
#define PCI_PRE_MEMLIMIT    0x0026        // Prefetchable memory Limit register
#define PCI_PRE_MEMBASE_U   0x0028        // Prefetchable memory base upper 32 bits
#define PCI_PRE_MEMLIMIT_U  0x002C        // Prefetchable memory limit upper 32 bits
#define PCI_SVID            0x002C        // Subsystem Vendor ID
#define PCI_SID             0x002E        // Subsystem ID
#define PCI_IOBASE_U        0x0030        // I/O base Upper Register
#define PCI_IOLIMIT_U       0x0032        // I/O Limit Upper Register
#define PCI_CAPP            0x0034        // Capabilities Pointer
#define PCI_EROM            0x0038        // Expansion ROM Base Address
#define PCI_INTLINE         0x003C        // Interrupt Line Register
#define PCI_INTPIN          0x003D        // Interrupt Pin Register
#define PCI_MAXGNT          0x003E        // Max Grant Register
#define PCI_BRIDGE_CNTL     0x003E        // Bridge Control Register
#define PCI_MAXLAT          0x003F        // Max Latency Register
#endif
//
// Bit Difinitions
//
#ifndef BIT0
#define BIT0                     0x0001
#define BIT1                     0x0002
#define BIT2                     0x0004
#define BIT3                     0x0008
#define BIT4                     0x0010
#define BIT5                     0x0020
#define BIT6                     0x0040
#define BIT7                     0x0080
#define BIT8                     0x0100
#define BIT9                     0x0200
#define BIT10                    0x0400
#define BIT11                    0x0800
#define BIT12                    0x1000
#define BIT13                    0x2000
#define BIT14                    0x4000
#define BIT15                    0x8000
#define BIT16                0x00010000
#define BIT17                0x00020000
#define BIT18                0x00040000
#define BIT19                0x00080000
#define BIT20                0x00100000
#define BIT21                0x00200000
#define BIT22                0x00400000
#define BIT23                0x00800000
#define BIT24                0x01000000
#define BIT25                0x02000000
#define BIT26                0x04000000
#define BIT27                0x08000000
#define BIT28                0x10000000
#define BIT29                0x20000000
#define BIT30                0x40000000
#define BIT31                0x80000000
#endif


//
//  Common Memory mapped Io access macros ------------------------------------------
//
#define QNCMmioAddress( BaseAddr, Register ) \
    ( (UINTN)BaseAddr + \
      (UINTN)(Register) \
    )

//
// UINT64
//
#define QNCMmio64Ptr( BaseAddr, Register ) \
    ( (volatile UINT64 *)QNCMmioAddress( BaseAddr, Register ) )

#define QNCMmio64( BaseAddr, Register ) \
    *QNCMmio64Ptr( BaseAddr, Register )

#define QNCMmio64Or( BaseAddr, Register, OrData ) \
    QNCMmio64( BaseAddr, Register ) = \
      (UINT64) ( \
        QNCMmio64( BaseAddr, Register ) | \
        (UINT64)(OrData) \
      )

#define QNCMmio64And( BaseAddr, Register, AndData ) \
    QNCMmio64( BaseAddr, Register ) = \
      (UINT64) ( \
        QNCMmio64( BaseAddr, Register ) & \
        (UINT64)(AndData) \
      )

#define QNCMmio64AndThenOr( BaseAddr, Register, AndData, OrData ) \
    QNCMmio64( BaseAddr, Register ) = \
      (UINT64) ( \
        ( QNCMmio64( BaseAddr, Register ) & \
            (UINT64)(AndData) \
        ) | \
        (UINT64)(OrData) \
      )

//
// UINT32
//
#define QNCMmio32Ptr( BaseAddr, Register ) \
    ( (volatile UINT32 *)QNCMmioAddress( BaseAddr, Register ) )

#define QNCMmio32( BaseAddr, Register ) \
    *QNCMmio32Ptr( BaseAddr, Register )

#define QNCMmio32Or( BaseAddr, Register, OrData ) \
    QNCMmio32( BaseAddr, Register ) = \
      (UINT32) ( \
        QNCMmio32( BaseAddr, Register ) | \
        (UINT32)(OrData) \
      )

#define QNCMmio32And( BaseAddr, Register, AndData ) \
    QNCMmio32( BaseAddr, Register ) = \
      (UINT32) ( \
        QNCMmio32( BaseAddr, Register ) & \
        (UINT32)(AndData) \
      )

#define QNCMmio32AndThenOr( BaseAddr, Register, AndData, OrData ) \
    QNCMmio32( BaseAddr, Register ) = \
      (UINT32) ( \
        ( QNCMmio32( BaseAddr, Register ) & \
            (UINT32)(AndData) \
        ) | \
        (UINT32)(OrData) \
      )
//
// UINT16
//

#define QNCMmio16Ptr( BaseAddr, Register ) \
    ( (volatile UINT16 *)QNCMmioAddress( BaseAddr, Register ) )

#define QNCMmio16( BaseAddr, Register ) \
    *QNCMmio16Ptr( BaseAddr, Register )

#define QNCMmio16Or( BaseAddr, Register, OrData ) \
    QNCMmio16( BaseAddr, Register ) = \
      (UINT16) ( \
        QNCMmio16( BaseAddr, Register ) | \
        (UINT16)(OrData) \
      )

#define QNCMmio16And( BaseAddr, Register, AndData ) \
    QNCMmio16( BaseAddr, Register ) = \
      (UINT16) ( \
        QNCMmio16( BaseAddr, Register ) & \
        (UINT16)(AndData) \
      )

#define QNCMmio16AndThenOr( BaseAddr, Register, AndData, OrData ) \
    QNCMmio16( BaseAddr, Register ) = \
      (UINT16) ( \
        ( QNCMmio16( BaseAddr, Register ) & \
            (UINT16)(AndData) \
        ) | \
        (UINT16)(OrData) \
      )
//
// UINT8
//
#define QNCMmio8Ptr( BaseAddr, Register ) \
    ( (volatile UINT8 *)QNCMmioAddress( BaseAddr, Register ) )

#define QNCMmio8( BaseAddr, Register ) \
    *QNCMmio8Ptr( BaseAddr, Register )

#define QNCMmio8Or( BaseAddr, Register, OrData ) \
    QNCMmio8( BaseAddr, Register ) = \
      (UINT8) ( \
        QNCMmio8( BaseAddr, Register ) | \
        (UINT8)(OrData) \
      )

#define QNCMmio8And( BaseAddr, Register, AndData ) \
    QNCMmio8( BaseAddr, Register ) = \
      (UINT8) ( \
        QNCMmio8( BaseAddr, Register ) & \
        (UINT8)(AndData) \
      )

#define QNCMmio8AndThenOr( BaseAddr, Register, AndData, OrData ) \
    QNCMmio8( BaseAddr, Register ) = \
      (UINT8) ( \
        ( QNCMmio8( BaseAddr, Register ) & \
            (UINT8)(AndData) \
          ) | \
        (UINT8)(OrData) \
      )

//
//  Common Memory mapped Pci access macros ------------------------------------------
//

#define QNCMmPciAddress( Segment, Bus, Device, Function, Register ) \
  ( (UINTN) QncGetPciExpressBaseAddress() + \
    (UINTN)(Bus << 20) + \
    (UINTN)(Device << 15) + \
    (UINTN)(Function << 12) + \
    (UINTN)(Register) \
  )

//
// Macro to calculate the Pci device's base memory mapped address
//
#define PciDeviceMmBase( Bus, Device, Function) \
    ( (UINTN) QncGetPciExpressBaseAddress () + \
      (UINTN)(Bus << 20) + \
      (UINTN)(Device << 15) + \
      (UINTN)(Function << 12) \
    )

//
// UINT32
//
#define QNCMmPci32Ptr( Segment, Bus, Device, Function, Register ) \
  ( (volatile UINT32 *)QNCMmPciAddress( Segment, Bus, Device, Function, Register ) )

#define QNCMmPci32( Segment, Bus, Device, Function, Register ) \
  *QNCMmPci32Ptr( Segment, Bus, Device, Function, Register )

#define QNCMmPci32Or( Segment, Bus, Device, Function, Register, OrData ) \
  QNCMmPci32( Segment, Bus, Device, Function, Register ) = \
    (UINT32) ( \
      QNCMmPci32( Segment, Bus, Device, Function, Register ) | \
      (UINT32)(OrData) \
    )

#define QNCMmPci32And( Segment, Bus, Device, Function, Register, AndData ) \
  QNCMmPci32( Segment, Bus, Device, Function, Register ) = \
    (UINT32) ( \
      QNCMmPci32( Segment, Bus, Device, Function, Register ) & \
      (UINT32)(AndData) \
    )

#define QNCMmPci32AndThenOr( Segment, Bus, Device, Function, Register, AndData, OrData ) \
  QNCMmPci32( Segment, Bus, Device, Function, Register ) = \
    (UINT32) ( \
      ( QNCMmPci32( Segment, Bus, Device, Function, Register ) & \
          (UINT32)(AndData) \
      ) | \
      (UINT32)(OrData) \
    )
//
// UINT16
//
#define QNCMmPci16Ptr( Segment, Bus, Device, Function, Register ) \
  ( (volatile UINT16 *)QNCMmPciAddress( Segment, Bus, Device, Function, Register ) )

#define QNCMmPci16( Segment, Bus, Device, Function, Register ) \
  *QNCMmPci16Ptr( Segment, Bus, Device, Function, Register )

#define QNCMmPci16Or( Segment, Bus, Device, Function, Register, OrData ) \
  QNCMmPci16( Segment, Bus, Device, Function, Register ) = \
    (UINT16) ( \
      QNCMmPci16( Segment, Bus, Device, Function, Register ) | \
      (UINT16)(OrData) \
    )

#define QNCMmPci16And( Segment, Bus, Device, Function, Register, AndData ) \
  QNCMmPci16( Segment, Bus, Device, Function, Register ) = \
    (UINT16) ( \
      QNCMmPci16( Segment, Bus, Device, Function, Register ) & \
      (UINT16)(AndData) \
    )

#define QNCMmPci16AndThenOr( Segment, Bus, Device, Function, Register, AndData, OrData ) \
  QNCMmPci16( Segment, Bus, Device, Function, Register ) = \
    (UINT16) ( \
      ( QNCMmPci16( Segment, Bus, Device, Function, Register ) & \
          (UINT16)(AndData) \
      ) | \
      (UINT16)(OrData) \
    )
//
// UINT8
//
#define QNCMmPci8Ptr( Segment, Bus, Device, Function, Register ) \
  ( (volatile UINT8 *)QNCMmPciAddress( Segment, Bus, Device, Function, Register ) )

#define QNCMmPci8( Segment, Bus, Device, Function, Register ) \
  *QNCMmPci8Ptr( Segment, Bus, Device, Function, Register )

#define QNCMmPci8Or( Segment, Bus, Device, Function, Register, OrData ) \
  QNCMmPci8( Segment, Bus, Device, Function, Register ) = \
    (UINT8) ( \
      QNCMmPci8( Segment, Bus, Device, Function, Register ) | \
      (UINT8)(OrData) \
    )

#define QNCMmPci8And( Segment, Bus, Device, Function, Register, AndData ) \
  QNCMmPci8( Segment, Bus, Device, Function, Register ) = \
    (UINT8) ( \
      QNCMmPci8( Segment, Bus, Device, Function, Register ) & \
      (UINT8)(AndData) \
    )

#define QNCMmPci8AndThenOr( Segment, Bus, Device, Function, Register, AndData, OrData ) \
  QNCMmPci8( Segment, Bus, Device, Function, Register ) = \
    (UINT8) ( \
      ( QNCMmPci8( Segment, Bus, Device, Function, Register ) & \
          (UINT8)(AndData) \
        ) | \
      (UINT8)(OrData) \
    )

#endif