| /** @file | |
| Header file for SdDxe Driver. | |
| This file defines common data structures, macro definitions and some module | |
| internal function header files. | |
| Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _SD_BLOCK_IO_H_ | |
| #define _SD_BLOCK_IO_H_ | |
| /** | |
| Reset the Block Device. | |
| @param This Indicates a pointer to the calling context. | |
| @param ExtendedVerification Driver may perform diagnostics on reset. | |
| @retval EFI_SUCCESS The device was reset. | |
| @retval EFI_DEVICE_ERROR The device is not functioning properly and could | |
| not be reset. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdReset ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN BOOLEAN ExtendedVerification | |
| ); | |
| /** | |
| Read BufferSize bytes from Lba into Buffer. | |
| @param This Indicates a pointer to the calling context. | |
| @param MediaId Id of the media, changes every time the media is replaced. | |
| @param Lba The starting Logical Block Address to read from | |
| @param BufferSize Size of Buffer, must be a multiple of device block size. | |
| @param Buffer A pointer to the destination buffer for the data. The caller is | |
| responsible for either having implicit or explicit ownership of the buffer. | |
| @retval EFI_SUCCESS The data was read correctly from the device. | |
| @retval EFI_DEVICE_ERROR The device reported an error while performing the read. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device. | |
| @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. | |
| @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, | |
| or the buffer is not on proper alignment. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdReadBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN UINTN BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| /** | |
| Write BufferSize bytes from Lba into Buffer. | |
| @param This Indicates a pointer to the calling context. | |
| @param MediaId The media ID that the write request is for. | |
| @param Lba The starting logical block address to be written. The caller is | |
| responsible for writing to only legitimate locations. | |
| @param BufferSize Size of Buffer, must be a multiple of device block size. | |
| @param Buffer A pointer to the source buffer for the data. | |
| @retval EFI_SUCCESS The data was written correctly to the device. | |
| @retval EFI_WRITE_PROTECTED The device can not be written to. | |
| @retval EFI_DEVICE_ERROR The device reported an error while performing the write. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device. | |
| @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. | |
| @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, | |
| or the buffer is not on proper alignment. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdWriteBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN UINTN BufferSize, | |
| IN VOID *Buffer | |
| ); | |
| /** | |
| Flush the Block Device. | |
| @param This Indicates a pointer to the calling context. | |
| @retval EFI_SUCCESS All outstanding data was written to the device | |
| @retval EFI_DEVICE_ERROR The device reported an error while writing back the data | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdFlushBlocks ( | |
| IN EFI_BLOCK_IO_PROTOCOL *This | |
| ); | |
| /** | |
| Reset the Block Device. | |
| @param[in] This Indicates a pointer to the calling context. | |
| @param[in] ExtendedVerification Driver may perform diagnostics on reset. | |
| @retval EFI_SUCCESS The device was reset. | |
| @retval EFI_DEVICE_ERROR The device is not functioning properly and could | |
| not be reset. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdResetEx ( | |
| IN EFI_BLOCK_IO2_PROTOCOL *This, | |
| IN BOOLEAN ExtendedVerification | |
| ); | |
| /** | |
| Read BufferSize bytes from Lba into Buffer. | |
| @param[in] This Indicates a pointer to the calling context. | |
| @param[in] MediaId Id of the media, changes every time the media is replaced. | |
| @param[in] Lba The starting Logical Block Address to read from. | |
| @param[in, out] Token A pointer to the token associated with the transaction. | |
| @param[in] BufferSize Size of Buffer, must be a multiple of device block size. | |
| @param[out] Buffer A pointer to the destination buffer for the data. The caller is | |
| responsible for either having implicit or explicit ownership of the buffer. | |
| @retval EFI_SUCCESS The read request was queued if Event is not NULL. | |
| The data was read correctly from the device if | |
| the Event is NULL. | |
| @retval EFI_DEVICE_ERROR The device reported an error while performing | |
| the read. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. | |
| @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the | |
| intrinsic block size of the device. | |
| @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, | |
| or the buffer is not on proper alignment. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack | |
| of resources. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdReadBlocksEx ( | |
| IN EFI_BLOCK_IO2_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN OUT EFI_BLOCK_IO2_TOKEN *Token, | |
| IN UINTN BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| /** | |
| Write BufferSize bytes from Lba into Buffer. | |
| @param[in] This Indicates a pointer to the calling context. | |
| @param[in] MediaId The media ID that the write request is for. | |
| @param[in] Lba The starting logical block address to be written. The | |
| caller is responsible for writing to only legitimate | |
| locations. | |
| @param[in, out] Token A pointer to the token associated with the transaction. | |
| @param[in] BufferSize Size of Buffer, must be a multiple of device block size. | |
| @param[in] Buffer A pointer to the source buffer for the data. | |
| @retval EFI_SUCCESS The data was written correctly to the device. | |
| @retval EFI_WRITE_PROTECTED The device can not be written to. | |
| @retval EFI_DEVICE_ERROR The device reported an error while performing the write. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device. | |
| @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. | |
| @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, | |
| or the buffer is not on proper alignment. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdWriteBlocksEx ( | |
| IN EFI_BLOCK_IO2_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN OUT EFI_BLOCK_IO2_TOKEN *Token, | |
| IN UINTN BufferSize, | |
| IN VOID *Buffer | |
| ); | |
| /** | |
| Flush the Block Device. | |
| @param[in] This Indicates a pointer to the calling context. | |
| @param[in, out] Token A pointer to the token associated with the transaction. | |
| @retval EFI_SUCCESS All outstanding data was written to the device | |
| @retval EFI_DEVICE_ERROR The device reported an error while writing back the data | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdFlushBlocksEx ( | |
| IN EFI_BLOCK_IO2_PROTOCOL *This, | |
| IN OUT EFI_BLOCK_IO2_TOKEN *Token | |
| ); | |
| /** | |
| Erase a specified number of device blocks. | |
| @param[in] This Indicates a pointer to the calling context. | |
| @param[in] MediaId The media ID that the erase request is for. | |
| @param[in] Lba The starting logical block address to be | |
| erased. The caller is responsible for erasing | |
| only legitimate locations. | |
| @param[in, out] Token A pointer to the token associated with the | |
| transaction. | |
| @param[in] Size The size in bytes to be erased. This must be | |
| a multiple of the physical block size of the | |
| device. | |
| @retval EFI_SUCCESS The erase request was queued if Event is not | |
| NULL. The data was erased correctly to the | |
| device if the Event is NULL.to the device. | |
| @retval EFI_WRITE_PROTECTED The device cannot be erased due to write | |
| protection. | |
| @retval EFI_DEVICE_ERROR The device reported an error while attempting | |
| to perform the erase operation. | |
| @retval EFI_INVALID_PARAMETER The erase request contains LBAs that are not | |
| valid. | |
| @retval EFI_NO_MEDIA There is no media in the device. | |
| @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdEraseBlocks ( | |
| IN EFI_ERASE_BLOCK_PROTOCOL *This, | |
| IN UINT32 MediaId, | |
| IN EFI_LBA Lba, | |
| IN OUT EFI_ERASE_BLOCK_TOKEN *Token, | |
| IN UINTN Size | |
| ); | |
| #endif | |