/** @file | |
Provides some data structure definitions used by the SD/MMC host controller driver. | |
Copyright (c) 2018-2019, NVIDIA CORPORATION. All rights reserved. | |
Copyright (c) 2015 - 2020, Intel Corporation. All rights reserved.<BR> | |
SPDX-License-Identifier: BSD-2-Clause-Patent | |
**/ | |
#ifndef _SD_MMC_PCI_HC_DXE_H_ | |
#define _SD_MMC_PCI_HC_DXE_H_ | |
#include <Uefi.h> | |
#include <IndustryStandard/Pci.h> | |
#include <IndustryStandard/Emmc.h> | |
#include <IndustryStandard/Sd.h> | |
#include <Library/UefiDriverEntryPoint.h> | |
#include <Library/DebugLib.h> | |
#include <Library/UefiBootServicesTableLib.h> | |
#include <Library/BaseMemoryLib.h> | |
#include <Library/MemoryAllocationLib.h> | |
#include <Library/UefiLib.h> | |
#include <Library/DevicePathLib.h> | |
#include <Library/PcdLib.h> | |
#include <Protocol/DevicePath.h> | |
#include <Protocol/PciIo.h> | |
#include <Protocol/DriverBinding.h> | |
#include <Protocol/ComponentName.h> | |
#include <Protocol/ComponentName2.h> | |
#include <Protocol/SdMmcOverride.h> | |
#include <Protocol/SdMmcPassThru.h> | |
#include "SdMmcPciHci.h" | |
extern EFI_COMPONENT_NAME_PROTOCOL gSdMmcPciHcComponentName; | |
extern EFI_COMPONENT_NAME2_PROTOCOL gSdMmcPciHcComponentName2; | |
extern EFI_DRIVER_BINDING_PROTOCOL gSdMmcPciHcDriverBinding; | |
extern EDKII_SD_MMC_OVERRIDE *mOverride; | |
#define SD_MMC_HC_PRIVATE_SIGNATURE SIGNATURE_32 ('s', 'd', 't', 'f') | |
#define SD_MMC_HC_PRIVATE_FROM_THIS(a) \ | |
CR(a, SD_MMC_HC_PRIVATE_DATA, PassThru, SD_MMC_HC_PRIVATE_SIGNATURE) | |
// | |
// Generic time out value, 1 microsecond as unit. | |
// | |
#define SD_MMC_HC_GENERIC_TIMEOUT (PcdGet32 (PcdSdMmcGenericTimeoutValue)) | |
// | |
// SD/MMC async transfer timer interval, set by experience. | |
// The unit is 100us, takes 1ms as interval. | |
// | |
#define SD_MMC_HC_ASYNC_TIMER EFI_TIMER_PERIOD_MILLISECONDS(1) | |
// | |
// SD/MMC removable device enumeration timer interval, set by experience. | |
// The unit is 100us, takes 100ms as interval. | |
// | |
#define SD_MMC_HC_ENUM_TIMER EFI_TIMER_PERIOD_MILLISECONDS(100) | |
typedef enum { | |
UnknownCardType, | |
SdCardType, | |
SdioCardType, | |
MmcCardType, | |
EmmcCardType | |
} SD_MMC_CARD_TYPE; | |
typedef enum { | |
RemovableSlot, | |
EmbeddedSlot, | |
SharedBusSlot, | |
UnknownSlot | |
} EFI_SD_MMC_SLOT_TYPE; | |
typedef struct { | |
BOOLEAN Enable; | |
EFI_SD_MMC_SLOT_TYPE SlotType; | |
BOOLEAN MediaPresent; | |
BOOLEAN Initialized; | |
SD_MMC_CARD_TYPE CardType; | |
UINT64 CurrentFreq; | |
EDKII_SD_MMC_OPERATING_PARAMETERS OperatingParameters; | |
} SD_MMC_HC_SLOT; | |
typedef struct { | |
UINTN Signature; | |
EFI_HANDLE ControllerHandle; | |
EFI_PCI_IO_PROTOCOL *PciIo; | |
EFI_SD_MMC_PASS_THRU_PROTOCOL PassThru; | |
UINT64 PciAttributes; | |
// | |
// The field is used to record the previous slot in GetNextSlot(). | |
// | |
UINT8 PreviousSlot; | |
// | |
// For Non-blocking operation. | |
// | |
EFI_EVENT TimerEvent; | |
// | |
// For Sd removable device enumeration. | |
// | |
EFI_EVENT ConnectEvent; | |
LIST_ENTRY Queue; | |
SD_MMC_HC_SLOT Slot[SD_MMC_HC_MAX_SLOT]; | |
SD_MMC_HC_SLOT_CAP Capability[SD_MMC_HC_MAX_SLOT]; | |
UINT64 MaxCurrent[SD_MMC_HC_MAX_SLOT]; | |
UINT16 ControllerVersion[SD_MMC_HC_MAX_SLOT]; | |
// | |
// Some controllers may require to override base clock frequency | |
// value stored in Capabilities Register 1. | |
// | |
UINT32 BaseClkFreq[SD_MMC_HC_MAX_SLOT]; | |
} SD_MMC_HC_PRIVATE_DATA; | |
typedef struct { | |
SD_MMC_BUS_MODE BusTiming; | |
UINT8 BusWidth; | |
UINT32 ClockFreq; | |
EDKII_SD_MMC_DRIVER_STRENGTH DriverStrength; | |
} SD_MMC_BUS_SETTINGS; | |
#define SD_MMC_HC_TRB_SIG SIGNATURE_32 ('T', 'R', 'B', 'T') | |
#define SD_MMC_TRB_RETRIES 5 | |
// | |
// TRB (Transfer Request Block) contains information for the cmd request. | |
// | |
typedef struct { | |
UINT32 Signature; | |
LIST_ENTRY TrbList; | |
UINT8 Slot; | |
UINT16 BlockSize; | |
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet; | |
VOID *Data; | |
UINT32 DataLen; | |
BOOLEAN Read; | |
EFI_PHYSICAL_ADDRESS DataPhy; | |
VOID *DataMap; | |
SD_MMC_HC_TRANSFER_MODE Mode; | |
SD_MMC_HC_ADMA_LENGTH_MODE AdmaLengthMode; | |
EFI_EVENT Event; | |
BOOLEAN Started; | |
BOOLEAN CommandComplete; | |
UINT64 Timeout; | |
UINT32 Retries; | |
BOOLEAN PioModeTransferCompleted; | |
UINT32 PioBlockIndex; | |
SD_MMC_HC_ADMA_32_DESC_LINE *Adma32Desc; | |
SD_MMC_HC_ADMA_64_V3_DESC_LINE *Adma64V3Desc; | |
SD_MMC_HC_ADMA_64_V4_DESC_LINE *Adma64V4Desc; | |
EFI_PHYSICAL_ADDRESS AdmaDescPhy; | |
VOID *AdmaMap; | |
UINT32 AdmaPages; | |
SD_MMC_HC_PRIVATE_DATA *Private; | |
} SD_MMC_HC_TRB; | |
#define SD_MMC_HC_TRB_FROM_THIS(a) \ | |
CR(a, SD_MMC_HC_TRB, TrbList, SD_MMC_HC_TRB_SIG) | |
// | |
// Task for Non-blocking mode. | |
// | |
typedef struct { | |
UINT32 Signature; | |
LIST_ENTRY Link; | |
UINT8 Slot; | |
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet; | |
BOOLEAN IsStart; | |
EFI_EVENT Event; | |
UINT64 RetryTimes; | |
BOOLEAN InfiniteWait; | |
VOID *Map; | |
VOID *MapAddress; | |
} SD_MMC_HC_QUEUE; | |
// | |
// Prototypes | |
// | |
/** | |
Execute card identification procedure. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@retval EFI_SUCCESS The card is identified correctly. | |
@retval Others The card can't be identified. | |
**/ | |
typedef | |
EFI_STATUS | |
(*CARD_TYPE_DETECT_ROUTINE) ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot | |
); | |
/** | |
Sends SD command to an SD card that is attached to the SD controller. | |
The PassThru() function sends the SD command specified by Packet to the SD card | |
specified by Slot. | |
If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned. | |
If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned. | |
If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER | |
is returned. | |
If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL, | |
EFI_INVALID_PARAMETER is returned. | |
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@param[in,out] Packet A pointer to the SD command data structure. | |
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is | |
not NULL, then nonblocking I/O is performed, and Event | |
will be signaled when the Packet completes. | |
@retval EFI_SUCCESS The SD Command Packet was sent by the host. | |
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD | |
command Packet. | |
@retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid. | |
@retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and | |
OutDataBuffer are NULL. | |
@retval EFI_NO_MEDIA SD Device not present in the Slot. | |
@retval EFI_UNSUPPORTED The command described by the SD Command Packet is not | |
supported by the host controller. | |
@retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the | |
limit supported by SD card ( i.e. if the number of bytes | |
exceed the Last LBA). | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPassThruPassThru ( | |
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
IN UINT8 Slot, | |
IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet, | |
IN EFI_EVENT Event OPTIONAL | |
); | |
/** | |
Used to retrieve next slot numbers supported by the SD controller. The function | |
returns information about all available slots (populated or not-populated). | |
The GetNextSlot() function retrieves the next slot number on an SD controller. | |
If on input Slot is 0xFF, then the slot number of the first slot on the SD controller | |
is returned. | |
If Slot is a slot number that was returned on a previous call to GetNextSlot(), then | |
the slot number of the next slot on the SD controller is returned. | |
If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(), | |
EFI_INVALID_PARAMETER is returned. | |
If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND | |
is returned. | |
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance. | |
@param[in,out] Slot On input, a pointer to a slot number on the SD controller. | |
On output, a pointer to the next slot number on the SD controller. | |
An input value of 0xFF retrieves the first slot number on the SD | |
controller. | |
@retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot. | |
@retval EFI_NOT_FOUND There are no more slots on this SD controller. | |
@retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call | |
to GetNextSlot(). | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPassThruGetNextSlot ( | |
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
IN OUT UINT8 *Slot | |
); | |
/** | |
Used to allocate and build a device path node for an SD card on the SD controller. | |
The BuildDevicePath() function allocates and builds a single device node for the SD | |
card specified by Slot. | |
If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND | |
is returned. | |
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. | |
If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES | |
is returned. | |
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of | |
DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is | |
returned. | |
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance. | |
@param[in] Slot Specifies the slot number of the SD card for which a device | |
path node is to be allocated and built. | |
@param[in,out] DevicePath A pointer to a single device path node that describes the SD | |
card specified by Slot. This function is responsible for | |
allocating the buffer DevicePath with the boot service | |
AllocatePool(). It is the caller's responsibility to free | |
DevicePath when the caller is finished with DevicePath. | |
@retval EFI_SUCCESS The device path node that describes the SD card specified by | |
Slot was allocated and returned in DevicePath. | |
@retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller. | |
@retval EFI_INVALID_PARAMETER DevicePath is NULL. | |
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPassThruBuildDevicePath ( | |
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
IN UINT8 Slot, | |
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath | |
); | |
/** | |
This function retrieves an SD card slot number based on the input device path. | |
The GetSlotNumber() function retrieves slot number for the SD card specified by | |
the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned. | |
If DevicePath is not a device path node type that the SD Pass Thru driver supports, | |
EFI_UNSUPPORTED is returned. | |
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
@param[in] DevicePath A pointer to the device path node that describes a SD | |
card on the SD controller. | |
@param[out] Slot On return, points to the slot number of an SD card on | |
the SD controller. | |
@retval EFI_SUCCESS SD card slot number is returned in Slot. | |
@retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL. | |
@retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD | |
Pass Thru driver supports. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPassThruGetSlotNumber ( | |
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
OUT UINT8 *Slot | |
); | |
/** | |
Resets an SD card that is connected to the SD controller. | |
The ResetDevice() function resets the SD card specified by Slot. | |
If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is | |
returned. | |
If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER | |
is returned. | |
If the device reset operation is completed, EFI_SUCCESS is returned. | |
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
@param[in] Slot Specifies the slot number of the SD card to be reset. | |
@retval EFI_SUCCESS The SD card specified by Slot was reset. | |
@retval EFI_UNSUPPORTED The SD controller does not support a device reset operation. | |
@retval EFI_INVALID_PARAMETER Slot number is invalid. | |
@retval EFI_NO_MEDIA SD Device not present in the Slot. | |
@retval EFI_DEVICE_ERROR The reset command failed due to a device error | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPassThruResetDevice ( | |
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
IN UINT8 Slot | |
); | |
// | |
// Driver model protocol interfaces | |
// | |
/** | |
Tests to see if this driver supports a given controller. If a child device is provided, | |
it further tests to see if this driver supports creating a handle for the specified child device. | |
This function checks to see if the driver specified by This supports the device specified by | |
ControllerHandle. Drivers will typically use the device path attached to | |
ControllerHandle and/or the services from the bus I/O abstraction attached to | |
ControllerHandle to determine if the driver supports ControllerHandle. This function | |
may be called many times during platform initialization. In order to reduce boot times, the tests | |
performed by this function must be very small, and take as little time as possible to execute. This | |
function must not change the state of any hardware devices, and this function must be aware that the | |
device specified by ControllerHandle may already be managed by the same driver or a | |
different driver. This function must match its calls to AllocatePages() with FreePages(), | |
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
Since ControllerHandle may have been previously started by the same driver, if a protocol is | |
already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
to guarantee the state of ControllerHandle is not modified by this function. | |
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
@param[in] ControllerHandle The handle of the controller to test. This handle | |
must support a protocol interface that supplies | |
an I/O abstraction to the driver. | |
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
parameter is ignored by device drivers, and is optional for bus | |
drivers. For bus drivers, if this parameter is not NULL, then | |
the bus driver must determine if the bus controller specified | |
by ControllerHandle and the child controller specified | |
by RemainingDevicePath are both supported by this | |
bus driver. | |
@retval EFI_SUCCESS The device specified by ControllerHandle and | |
RemainingDevicePath is supported by the driver specified by This. | |
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
RemainingDevicePath is already being managed by the driver | |
specified by This. | |
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
RemainingDevicePath is already being managed by a different | |
driver or an application that requires exclusive access. | |
Currently not implemented. | |
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
RemainingDevicePath is not supported by the driver specified by This. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPciHcDriverBindingSupported ( | |
IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
IN EFI_HANDLE Controller, | |
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
); | |
/** | |
Starts a device controller or a bus controller. | |
The Start() function is designed to be invoked from the EFI boot service ConnectController(). | |
As a result, much of the error checking on the parameters to Start() has been moved into this | |
common boot service. It is legal to call Start() from other locations, | |
but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
1. ControllerHandle must be a valid EFI_HANDLE. | |
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned | |
EFI_DEVICE_PATH_PROTOCOL. | |
3. Prior to calling Start(), the Supported() function for the driver specified by This must | |
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. | |
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
@param[in] ControllerHandle The handle of the controller to start. This handle | |
must support a protocol interface that supplies | |
an I/O abstraction to the driver. | |
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
parameter is ignored by device drivers, and is optional for bus | |
drivers. For a bus driver, if this parameter is NULL, then handles | |
for all the children of Controller are created by this driver. | |
If this parameter is not NULL and the first Device Path Node is | |
not the End of Device Path Node, then only the handle for the | |
child device specified by the first Device Path Node of | |
RemainingDevicePath is created by this driver. | |
If the first Device Path Node of RemainingDevicePath is | |
the End of Device Path Node, no child handle is created by this | |
driver. | |
@retval EFI_SUCCESS The device was started. | |
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. | |
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
@retval Others The driver failded to start the device. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPciHcDriverBindingStart ( | |
IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
IN EFI_HANDLE Controller, | |
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
); | |
/** | |
Stops a device controller or a bus controller. | |
The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). | |
As a result, much of the error checking on the parameters to Stop() has been moved | |
into this common boot service. It is legal to call Stop() from other locations, | |
but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this | |
same driver's Start() function. | |
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid | |
EFI_HANDLE. In addition, all of these handles must have been created in this driver's | |
Start() function, and the Start() function must have called OpenProtocol() on | |
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
@param[in] ControllerHandle A handle to the device being stopped. The handle must | |
support a bus specific I/O protocol for the driver | |
to use to stop the device. | |
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. | |
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL | |
if NumberOfChildren is 0. | |
@retval EFI_SUCCESS The device was stopped. | |
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPciHcDriverBindingStop ( | |
IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
IN EFI_HANDLE Controller, | |
IN UINTN NumberOfChildren, | |
IN EFI_HANDLE *ChildHandleBuffer | |
); | |
// | |
// EFI Component Name Functions | |
// | |
/** | |
Retrieves a Unicode string that is the user readable name of the driver. | |
This function retrieves the user readable name of a driver in the form of a | |
Unicode string. If the driver specified by This has a user readable name in | |
the language specified by Language, then a pointer to the driver name is | |
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified | |
by This does not support the language specified by Language, | |
then EFI_UNSUPPORTED is returned. | |
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
EFI_COMPONENT_NAME_PROTOCOL instance. | |
@param Language[in] A pointer to a Null-terminated ASCII string | |
array indicating the language. This is the | |
language of the driver name that the caller is | |
requesting, and it must match one of the | |
languages specified in SupportedLanguages. The | |
number of languages supported by a driver is up | |
to the driver writer. Language is specified | |
in RFC 4646 or ISO 639-2 language code format. | |
@param DriverName[out] A pointer to the Unicode string to return. | |
This Unicode string is the name of the | |
driver specified by This in the language | |
specified by Language. | |
@retval EFI_SUCCESS The Unicode string for the Driver specified by | |
This and the language specified by Language was | |
returned in DriverName. | |
@retval EFI_INVALID_PARAMETER Language is NULL. | |
@retval EFI_INVALID_PARAMETER DriverName is NULL. | |
@retval EFI_UNSUPPORTED The driver specified by This does not support | |
the language specified by Language. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPciHcComponentNameGetDriverName ( | |
IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
IN CHAR8 *Language, | |
OUT CHAR16 **DriverName | |
); | |
/** | |
Retrieves a Unicode string that is the user readable name of the controller | |
that is being managed by a driver. | |
This function retrieves the user readable name of the controller specified by | |
ControllerHandle and ChildHandle in the form of a Unicode string. If the | |
driver specified by This has a user readable name in the language specified by | |
Language, then a pointer to the controller name is returned in ControllerName, | |
and EFI_SUCCESS is returned. If the driver specified by This is not currently | |
managing the controller specified by ControllerHandle and ChildHandle, | |
then EFI_UNSUPPORTED is returned. If the driver specified by This does not | |
support the language specified by Language, then EFI_UNSUPPORTED is returned. | |
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
EFI_COMPONENT_NAME_PROTOCOL instance. | |
@param ControllerHandle[in] The handle of a controller that the driver | |
specified by This is managing. This handle | |
specifies the controller whose name is to be | |
returned. | |
@param ChildHandle[in] The handle of the child controller to retrieve | |
the name of. This is an optional parameter that | |
may be NULL. It will be NULL for device | |
drivers. It will also be NULL for a bus drivers | |
that wish to retrieve the name of the bus | |
controller. It will not be NULL for a bus | |
driver that wishes to retrieve the name of a | |
child controller. | |
@param Language[in] A pointer to a Null-terminated ASCII string | |
array indicating the language. This is the | |
language of the driver name that the caller is | |
requesting, and it must match one of the | |
languages specified in SupportedLanguages. The | |
number of languages supported by a driver is up | |
to the driver writer. Language is specified in | |
RFC 4646 or ISO 639-2 language code format. | |
@param ControllerName[out] A pointer to the Unicode string to return. | |
This Unicode string is the name of the | |
controller specified by ControllerHandle and | |
ChildHandle in the language specified by | |
Language from the point of view of the driver | |
specified by This. | |
@retval EFI_SUCCESS The Unicode string for the user readable name in | |
the language specified by Language for the | |
driver specified by This was returned in | |
DriverName. | |
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE. | |
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid | |
EFI_HANDLE. | |
@retval EFI_INVALID_PARAMETER Language is NULL. | |
@retval EFI_INVALID_PARAMETER ControllerName is NULL. | |
@retval EFI_UNSUPPORTED The driver specified by This is not currently | |
managing the controller specified by | |
ControllerHandle and ChildHandle. | |
@retval EFI_UNSUPPORTED The driver specified by This does not support | |
the language specified by Language. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
SdMmcPciHcComponentNameGetControllerName ( | |
IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
IN EFI_HANDLE ControllerHandle, | |
IN EFI_HANDLE ChildHandle OPTIONAL, | |
IN CHAR8 *Language, | |
OUT CHAR16 **ControllerName | |
); | |
/** | |
Create a new TRB for the SD/MMC cmd request. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@param[in] Packet A pointer to the SD command data structure. | |
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is | |
not NULL, then nonblocking I/O is performed, and Event | |
will be signaled when the Packet completes. | |
@return Created Trb or NULL. | |
**/ | |
SD_MMC_HC_TRB * | |
SdMmcCreateTrb ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot, | |
IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet, | |
IN EFI_EVENT Event | |
); | |
/** | |
Free the resource used by the TRB. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
**/ | |
VOID | |
SdMmcFreeTrb ( | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Check if the env is ready for execute specified TRB. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
@retval EFI_SUCCESS The env is ready for TRB execution. | |
@retval EFI_NOT_READY The env is not ready for TRB execution. | |
@retval Others Some erros happen. | |
**/ | |
EFI_STATUS | |
SdMmcCheckTrbEnv ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Wait for the env to be ready for execute specified TRB. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
@retval EFI_SUCCESS The env is ready for TRB execution. | |
@retval EFI_TIMEOUT The env is not ready for TRB execution in time. | |
@retval Others Some erros happen. | |
**/ | |
EFI_STATUS | |
SdMmcWaitTrbEnv ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Execute the specified TRB. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
@retval EFI_SUCCESS The TRB is sent to host controller successfully. | |
@retval Others Some erros happen when sending this request to the host controller. | |
**/ | |
EFI_STATUS | |
SdMmcExecTrb ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Check the TRB execution result. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
@retval EFI_SUCCESS The TRB is executed successfully. | |
@retval EFI_NOT_READY The TRB is not completed for execution. | |
@retval Others Some erros happen when executing this request. | |
**/ | |
EFI_STATUS | |
SdMmcCheckTrbResult ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Wait for the TRB execution result. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance. | |
@retval EFI_SUCCESS The TRB is executed successfully. | |
@retval Others Some erros happen when executing this request. | |
**/ | |
EFI_STATUS | |
SdMmcWaitTrbResult ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN SD_MMC_HC_TRB *Trb | |
); | |
/** | |
Execute EMMC device identification procedure. | |
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@retval EFI_SUCCESS There is a EMMC card. | |
@retval Others There is not a EMMC card. | |
**/ | |
EFI_STATUS | |
EmmcIdentification ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot | |
); | |
/** | |
Execute EMMC device identification procedure. | |
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@retval EFI_SUCCESS There is a EMMC card. | |
@retval Others There is not a EMMC card. | |
**/ | |
EFI_STATUS | |
SdCardIdentification ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot | |
); | |
/** | |
SD/MMC card clock supply. | |
Refer to SD Host Controller Simplified spec 3.0 Section 3.2.1 for details. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@param[in] BusTiming BusTiming at which the frequency change is done. | |
@param[in] FirstTimeSetup Flag to indicate whether the clock is being setup for the first time. | |
@param[in] ClockFreq The max clock frequency to be set. The unit is KHz. | |
@retval EFI_SUCCESS The clock is supplied successfully. | |
@retval Others The clock isn't supplied successfully. | |
**/ | |
EFI_STATUS | |
SdMmcHcClockSupply ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot, | |
IN SD_MMC_BUS_MODE BusTiming, | |
IN BOOLEAN FirstTimeSetup, | |
IN UINT64 ClockFreq | |
); | |
/** | |
Software reset the specified SD/MMC host controller. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@retval EFI_SUCCESS The software reset executes successfully. | |
@retval Others The software reset fails. | |
**/ | |
EFI_STATUS | |
SdMmcHcReset ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot | |
); | |
/** | |
Initial SD/MMC host controller with lowest clock frequency, max power and max timeout value | |
at initialization. | |
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance. | |
@param[in] Slot The slot number of the SD card to send the command to. | |
@retval EFI_SUCCESS The host controller is initialized successfully. | |
@retval Others The host controller isn't initialized successfully. | |
**/ | |
EFI_STATUS | |
SdMmcHcInitHost ( | |
IN SD_MMC_HC_PRIVATE_DATA *Private, | |
IN UINT8 Slot | |
); | |
#endif |