/** @file | |
Null Serial Port library instance with empty functions. | |
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> | |
SPDX-License-Identifier: BSD-2-Clause-Patent | |
**/ | |
#include <Base.h> | |
#include <Library/SerialPortLib.h> | |
/** | |
Initialize the serial device hardware. | |
If no initialization is required, then return RETURN_SUCCESS. | |
If the serial device was successfully initialized, then return RETURN_SUCCESS. | |
If the serial device could not be initialized, then return RETURN_DEVICE_ERROR. | |
@retval RETURN_SUCCESS The serial device was initialized. | |
@retval RETURN_DEVICE_ERROR The serial device could not be initialized. | |
**/ | |
RETURN_STATUS | |
EFIAPI | |
SerialPortInitialize ( | |
VOID | |
) | |
{ | |
return RETURN_SUCCESS; | |
} | |
/** | |
Write data from buffer to serial device. | |
Writes NumberOfBytes data bytes from Buffer to the serial device. | |
The number of bytes actually written to the serial device is returned. | |
If the return value is less than NumberOfBytes, then the write operation failed. | |
If Buffer is NULL, then ASSERT(). | |
If NumberOfBytes is zero, then return 0. | |
@param Buffer The pointer to the data buffer to be written. | |
@param NumberOfBytes The number of bytes to written to the serial device. | |
@retval 0 NumberOfBytes is 0. | |
@retval >0 The number of bytes written to the serial device. | |
If this value is less than NumberOfBytes, then the write operation failed. | |
**/ | |
UINTN | |
EFIAPI | |
SerialPortWrite ( | |
IN UINT8 *Buffer, | |
IN UINTN NumberOfBytes | |
) | |
{ | |
return 0; | |
} | |
/** | |
Read data from serial device and save the datas in buffer. | |
Reads NumberOfBytes data bytes from a serial device into the buffer | |
specified by Buffer. The number of bytes actually read is returned. | |
If the return value is less than NumberOfBytes, then the rest operation failed. | |
If Buffer is NULL, then ASSERT(). | |
If NumberOfBytes is zero, then return 0. | |
@param Buffer The pointer to the data buffer to store the data read from the serial device. | |
@param NumberOfBytes The number of bytes which will be read. | |
@retval 0 Read data failed; No data is to be read. | |
@retval >0 The actual number of bytes read from serial device. | |
**/ | |
UINTN | |
EFIAPI | |
SerialPortRead ( | |
OUT UINT8 *Buffer, | |
IN UINTN NumberOfBytes | |
) | |
{ | |
return 0; | |
} | |
/** | |
Polls a serial device to see if there is any data waiting to be read. | |
Polls a serial device to see if there is any data waiting to be read. | |
If there is data waiting to be read from the serial device, then TRUE is returned. | |
If there is no data waiting to be read from the serial device, then FALSE is returned. | |
@retval TRUE Data is waiting to be read from the serial device. | |
@retval FALSE There is no data waiting to be read from the serial device. | |
**/ | |
BOOLEAN | |
EFIAPI | |
SerialPortPoll ( | |
VOID | |
) | |
{ | |
return FALSE; | |
} | |
/** | |
Sets the control bits on a serial device. | |
@param Control Sets the bits of Control that are settable. | |
@retval RETURN_SUCCESS The new control bits were set on the serial device. | |
@retval RETURN_UNSUPPORTED The serial device does not support this operation. | |
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. | |
**/ | |
RETURN_STATUS | |
EFIAPI | |
SerialPortSetControl ( | |
IN UINT32 Control | |
) | |
{ | |
return RETURN_UNSUPPORTED; | |
} | |
/** | |
Retrieve the status of the control bits on a serial device. | |
@param Control A pointer to return the current control signals from the serial device. | |
@retval RETURN_SUCCESS The control bits were read from the serial device. | |
@retval RETURN_UNSUPPORTED The serial device does not support this operation. | |
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. | |
**/ | |
RETURN_STATUS | |
EFIAPI | |
SerialPortGetControl ( | |
OUT UINT32 *Control | |
) | |
{ | |
return RETURN_UNSUPPORTED; | |
} | |
/** | |
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, | |
data bits, and stop bits on a serial device. | |
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the | |
device's default interface speed. | |
On output, the value actually set. | |
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the | |
serial interface. A ReceiveFifoDepth value of 0 will use | |
the device's default FIFO depth. | |
On output, the value actually set. | |
@param Timeout The requested time out for a single character in microseconds. | |
This timeout applies to both the transmit and receive side of the | |
interface. A Timeout value of 0 will use the device's default time | |
out value. | |
On output, the value actually set. | |
@param Parity The type of parity to use on this serial device. A Parity value of | |
DefaultParity will use the device's default parity value. | |
On output, the value actually set. | |
@param DataBits The number of data bits to use on the serial device. A DataBits | |
vaule of 0 will use the device's default data bit setting. | |
On output, the value actually set. | |
@param StopBits The number of stop bits to use on this serial device. A StopBits | |
value of DefaultStopBits will use the device's default number of | |
stop bits. | |
On output, the value actually set. | |
@retval RETURN_SUCCESS The new attributes were set on the serial device. | |
@retval RETURN_UNSUPPORTED The serial device does not support this operation. | |
@retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value. | |
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. | |
**/ | |
RETURN_STATUS | |
EFIAPI | |
SerialPortSetAttributes ( | |
IN OUT UINT64 *BaudRate, | |
IN OUT UINT32 *ReceiveFifoDepth, | |
IN OUT UINT32 *Timeout, | |
IN OUT EFI_PARITY_TYPE *Parity, | |
IN OUT UINT8 *DataBits, | |
IN OUT EFI_STOP_BITS_TYPE *StopBits | |
) | |
{ | |
return RETURN_UNSUPPORTED; | |
} |