/** @file | |
IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. | |
This file contains all NetFn App commands, including: | |
IPM Device "Global" Commands (Chapter 20) | |
Firmware Firewall & Command Discovery Commands (Chapter 21) | |
BMC Watchdog Timer Commands (Chapter 27) | |
IPMI Messaging Support Commands (Chapter 22) | |
RMCP+ Support and Payload Commands (Chapter 24) | |
See IPMI specification, Appendix G, Command Assignments | |
and Appendix H, Sub-function Assignments. | |
Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR> | |
SPDX-License-Identifier: BSD-2-Clause-Patent | |
**/ | |
#ifndef _IPMI_NET_FN_APP_H_ | |
#define _IPMI_NET_FN_APP_H_ | |
#pragma pack(1) | |
// | |
// Net function definition for App command | |
// | |
#define IPMI_NETFN_APP 0x06 | |
// | |
// Below is Definitions for IPM Device "Global" Commands (Chapter 20) | |
// | |
// | |
// Definitions for Get Device ID command | |
// | |
#define IPMI_APP_GET_DEVICE_ID 0x1 | |
// | |
// Constants and Structure definitions for "Get Device ID" command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 DeviceRevision : 4; | |
UINT8 Reserved : 3; | |
UINT8 DeviceSdr : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_DEVICE_ID_DEVICE_REV; | |
typedef union { | |
struct { | |
UINT8 MajorFirmwareRev : 7; | |
UINT8 UpdateMode : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_DEVICE_ID_FIRMWARE_REV_1; | |
typedef union { | |
struct { | |
UINT8 SensorDeviceSupport : 1; | |
UINT8 SdrRepositorySupport : 1; | |
UINT8 SelDeviceSupport : 1; | |
UINT8 FruInventorySupport : 1; | |
UINT8 IpmbMessageReceiver : 1; | |
UINT8 IpmbMessageGenerator : 1; | |
UINT8 BridgeSupport : 1; | |
UINT8 ChassisSupport : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_DEVICE_ID_DEVICE_SUPPORT; | |
typedef struct { | |
UINT8 CompletionCode; | |
UINT8 DeviceId; | |
IPMI_GET_DEVICE_ID_DEVICE_REV DeviceRevision; | |
IPMI_GET_DEVICE_ID_FIRMWARE_REV_1 FirmwareRev1; | |
UINT8 MinorFirmwareRev; | |
UINT8 SpecificationVersion; | |
IPMI_GET_DEVICE_ID_DEVICE_SUPPORT DeviceSupport; | |
UINT8 ManufacturerId[3]; | |
UINT16 ProductId; | |
UINT32 AuxFirmwareRevInfo; | |
} IPMI_GET_DEVICE_ID_RESPONSE; | |
// | |
// Definitions for Cold Reset command | |
// | |
#define IPMI_APP_COLD_RESET 0x2 | |
// | |
// Constants and Structure definitions for "Cold Reset" command to follow here | |
// | |
// | |
// Definitions for Warm Reset command | |
// | |
#define IPMI_APP_WARM_RESET 0x3 | |
// | |
// Constants and Structure definitions for "Warm Reset" command to follow here | |
// | |
// | |
// Definitions for Get Self Results command | |
// | |
#define IPMI_APP_GET_SELFTEST_RESULTS 0x4 | |
// | |
// Constants and Structure definitions for "Get Self Test Results" command to follow here | |
// | |
typedef struct { | |
UINT8 CompletionCode; | |
UINT8 Result; | |
UINT8 Param; | |
} IPMI_SELF_TEST_RESULT_RESPONSE; | |
#define IPMI_APP_SELFTEST_NO_ERROR 0x55 | |
#define IPMI_APP_SELFTEST_NOT_IMPLEMENTED 0x56 | |
#define IPMI_APP_SELFTEST_ERROR 0x57 | |
#define IPMI_APP_SELFTEST_FATAL_HW_ERROR 0x58 | |
#define IPMI_APP_SELFTEST_INACCESSIBLE_SEL 0x80 | |
#define IPMI_APP_SELFTEST_INACCESSIBLE_SDR 0x40 | |
#define IPMI_APP_SELFTEST_INACCESSIBLE_FRU 0x20 | |
#define IPMI_APP_SELFTEST_IPMB_SIGNAL_FAIL 0x10 | |
#define IPMI_APP_SELFTEST_SDR_REPOSITORY_EMPTY 0x08 | |
#define IPMI_APP_SELFTEST_FRU_CORRUPT 0x04 | |
#define IPMI_APP_SELFTEST_FW_BOOTBLOCK_CORRUPT 0x02 | |
#define IPMI_APP_SELFTEST_FW_CORRUPT 0x01 | |
// | |
// Definitions for Manufacturing Test ON command | |
// | |
#define IPMI_APP_MANUFACTURING_TEST_ON 0x5 | |
// | |
// Constants and Structure definitions for "Manufacturing Test ON" command to follow here | |
// | |
// | |
// Definitions for Set ACPI Power State command | |
// | |
#define IPMI_APP_SET_ACPI_POWERSTATE 0x6 | |
// | |
// Constants and Structure definitions for "Set ACPI Power State" command to follow here | |
// | |
// | |
// Definitions for System Power State | |
// | |
// Working | |
#define IPMI_SYSTEM_POWER_STATE_S0_G0 0x0 | |
#define IPMI_SYSTEM_POWER_STATE_S1 0x1 | |
#define IPMI_SYSTEM_POWER_STATE_S2 0x2 | |
#define IPMI_SYSTEM_POWER_STATE_S3 0x3 | |
#define IPMI_SYSTEM_POWER_STATE_S4 0x4 | |
// Soft off | |
#define IPMI_SYSTEM_POWER_STATE_S5_G2 0x5 | |
// Sent when message source cannot differentiate between S4 and S5 | |
#define IPMI_SYSTEM_POWER_STATE_S4_S5 0x6 | |
// Mechanical off | |
#define IPMI_SYSTEM_POWER_STATE_G3 0x7 | |
// Sleeping - cannot differentiate between S1-S3 | |
#define IPMI_SYSTEM_POWER_STATE_SLEEPING 0x8 | |
// Sleeping - cannot differentiate between S1-S4 | |
#define IPMI_SYSTEM_POWER_STATE_G1_SLEEPING 0x9 | |
// S5 entered by override | |
#define IPMI_SYSTEM_POWER_STATE_OVERRIDE 0xA | |
#define IPMI_SYSTEM_POWER_STATE_LEGACY_ON 0x20 | |
#define IPMI_SYSTEM_POWER_STATE_LEGACY_OFF 0x21 | |
#define IPMI_SYSTEM_POWER_STATE_UNKNOWN 0x2A | |
#define IPMI_SYSTEM_POWER_STATE_NO_CHANGE 0x7F | |
// | |
// Definitions for Device Power State | |
// | |
#define IPMI_DEVICE_POWER_STATE_D0 0x0 | |
#define IPMI_DEVICE_POWER_STATE_D1 0x1 | |
#define IPMI_DEVICE_POWER_STATE_D2 0x2 | |
#define IPMI_DEVICE_POWER_STATE_D3 0x3 | |
#define IPMI_DEVICE_POWER_STATE_UNKNOWN 0x2A | |
#define IPMI_DEVICE_POWER_STATE_NO_CHANGE 0x7F | |
typedef union { | |
struct { | |
UINT8 PowerState : 7; | |
UINT8 StateChange : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_ACPI_POWER_STATE; | |
typedef struct { | |
IPMI_ACPI_POWER_STATE SystemPowerState; | |
IPMI_ACPI_POWER_STATE DevicePowerState; | |
} IPMI_SET_ACPI_POWER_STATE_REQUEST; | |
// | |
// Definitions for Get ACPI Power State command | |
// | |
#define IPMI_APP_GET_ACPI_POWERSTATE 0x7 | |
// | |
// Constants and Structure definitions for "Get ACPI Power State" command to follow here | |
// | |
// | |
// Definitions for Get Device GUID command | |
// | |
#define IPMI_APP_GET_DEVICE_GUID 0x8 | |
// | |
// Constants and Structure definitions for "Get Device GUID" command to follow here | |
// | |
// | |
// Message structure definition for "Get Device Guid" IPMI command | |
// | |
typedef struct { | |
UINT8 CompletionCode; | |
UINT8 Guid[16]; | |
} IPMI_GET_DEVICE_GUID_RESPONSE; | |
// | |
// Below is Definitions for BMC Watchdog Timer Commands (Chapter 27) | |
// | |
// | |
// Definitions for Reset WatchDog Timer command | |
// | |
#define IPMI_APP_RESET_WATCHDOG_TIMER 0x22 | |
// | |
// Definitions for Set WatchDog Timer command | |
// | |
#define IPMI_APP_SET_WATCHDOG_TIMER 0x24 | |
// | |
// Constants and Structure definitions for "Set WatchDog Timer" command to follow here | |
// | |
// | |
// Definitions for watchdog timer use | |
// | |
#define IPMI_WATCHDOG_TIMER_BIOS_FRB2 0x1 | |
#define IPMI_WATCHDOG_TIMER_BIOS_POST 0x2 | |
#define IPMI_WATCHDOG_TIMER_OS_LOADER 0x3 | |
#define IPMI_WATCHDOG_TIMER_SMS 0x4 | |
#define IPMI_WATCHDOG_TIMER_OEM 0x5 | |
// | |
// Structure definition for timer Use | |
// | |
typedef union { | |
struct { | |
UINT8 TimerUse : 3; | |
UINT8 Reserved : 3; | |
UINT8 TimerRunning : 1; | |
UINT8 TimerUseExpirationFlagLog : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_WATCHDOG_TIMER_USE; | |
// | |
// Definitions for watchdog timeout action | |
// | |
#define IPMI_WATCHDOG_TIMER_ACTION_NO_ACTION 0x0 | |
#define IPMI_WATCHDOG_TIMER_ACTION_HARD_RESET 0x1 | |
#define IPMI_WATCHDOG_TIMER_ACTION_POWER_DONW 0x2 | |
#define IPMI_WATCHDOG_TIMER_ACTION_POWER_CYCLE 0x3 | |
// | |
// Definitions for watchdog pre-timeout interrupt | |
// | |
#define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_NONE 0x0 | |
#define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_SMI 0x1 | |
#define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_NMI 0x2 | |
#define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_MESSAGING 0x3 | |
// | |
// Structure definitions for Timer Actions | |
// | |
typedef union { | |
struct { | |
UINT8 TimeoutAction : 3; | |
UINT8 Reserved1 : 1; | |
UINT8 PreTimeoutInterrupt : 3; | |
UINT8 Reserved2 : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_WATCHDOG_TIMER_ACTIONS; | |
// | |
// Bit definitions for Timer use expiration flags | |
// | |
#define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_BIOS_FRB2 BIT1 | |
#define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_BIOS_POST BIT2 | |
#define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_OS_LOAD BIT3 | |
#define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_SMS_OS BIT4 | |
#define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_OEM BIT5 | |
typedef struct { | |
IPMI_WATCHDOG_TIMER_USE TimerUse; | |
IPMI_WATCHDOG_TIMER_ACTIONS TimerActions; | |
UINT8 PretimeoutInterval; | |
UINT8 TimerUseExpirationFlagsClear; | |
UINT16 InitialCountdownValue; | |
} IPMI_SET_WATCHDOG_TIMER_REQUEST; | |
// | |
// Definitions for Get WatchDog Timer command | |
// | |
#define IPMI_APP_GET_WATCHDOG_TIMER 0x25 | |
// | |
// Constants and Structure definitions for "Get WatchDog Timer" command to follow here | |
// | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_WATCHDOG_TIMER_USE TimerUse; | |
IPMI_WATCHDOG_TIMER_ACTIONS TimerActions; | |
UINT8 PretimeoutInterval; | |
UINT8 TimerUseExpirationFlagsClear; | |
UINT16 InitialCountdownValue; | |
UINT16 PresentCountdownValue; | |
} IPMI_GET_WATCHDOG_TIMER_RESPONSE; | |
// | |
// Below is Definitions for IPMI Messaging Support Commands (Chapter 22) | |
// | |
// | |
// Definitions for Set BMC Global Enables command | |
// | |
#define IPMI_APP_SET_BMC_GLOBAL_ENABLES 0x2E | |
// | |
// Constants and Structure definitions for "Set BMC Global Enables " command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 ReceiveMessageQueueInterrupt : 1; | |
UINT8 EventMessageBufferFullInterrupt : 1; | |
UINT8 EventMessageBuffer : 1; | |
UINT8 SystemEventLogging : 1; | |
UINT8 Reserved : 1; | |
UINT8 Oem0Enable : 1; | |
UINT8 Oem1Enable : 1; | |
UINT8 Oem2Enable : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_BMC_GLOBAL_ENABLES; | |
typedef struct { | |
IPMI_BMC_GLOBAL_ENABLES SetEnables; | |
} IPMI_SET_BMC_GLOBAL_ENABLES_REQUEST; | |
// | |
// Definitions for Get BMC Global Enables command | |
// | |
#define IPMI_APP_GET_BMC_GLOBAL_ENABLES 0x2F | |
// | |
// Constants and Structure definitions for "Get BMC Global Enables " command to follow here | |
// | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_BMC_GLOBAL_ENABLES GetEnables; | |
} IPMI_GET_BMC_GLOBAL_ENABLES_RESPONSE; | |
// | |
// Definitions for Clear Message Flags command | |
// | |
#define IPMI_APP_CLEAR_MESSAGE_FLAGS 0x30 | |
// | |
// Constants and Structure definitions for "Clear Message Flags" command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 ReceiveMessageQueue : 1; | |
UINT8 EventMessageBuffer : 1; | |
UINT8 Reserved1 : 1; | |
UINT8 WatchdogPerTimeoutInterrupt : 1; | |
UINT8 Reserved2 : 1; | |
UINT8 Oem0 : 1; | |
UINT8 Oem1 : 1; | |
UINT8 Oem2 : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_MESSAGE_FLAGS; | |
typedef struct { | |
IPMI_MESSAGE_FLAGS ClearFlags; | |
} IPMI_CLEAR_MESSAGE_FLAGS_REQUEST; | |
// | |
// Definitions for Get Message Flags command | |
// | |
#define IPMI_APP_GET_MESSAGE_FLAGS 0x31 | |
// | |
// Constants and Structure definitions for "Get Message Flags" command to follow here | |
// | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_MESSAGE_FLAGS GetFlags; | |
} IPMI_GET_MESSAGE_FLAGS_RESPONSE; | |
// | |
// Definitions for Enable Message Channel Receive command | |
// | |
#define IPMI_APP_ENABLE_MESSAGE_CHANNEL_RECEIVE 0x32 | |
// | |
// Constants and Structure definitions for "Enable Message Channel Receive" command to follow here | |
// | |
// | |
// Definitions for Get Message command | |
// | |
#define IPMI_APP_GET_MESSAGE 0x33 | |
// | |
// Constants and Structure definitions for "Get Message" command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 ChannelNumber : 4; | |
UINT8 InferredPrivilegeLevel : 4; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_MESSAGE_CHANNEL_NUMBER; | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_GET_MESSAGE_CHANNEL_NUMBER ChannelNumber; | |
UINT8 MessageData[0]; | |
} IPMI_GET_MESSAGE_RESPONSE; | |
// | |
// Definitions for Send Message command | |
// | |
#define IPMI_APP_SEND_MESSAGE 0x34 | |
// | |
// Constants and Structure definitions for "Send Message" command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 ChannelNumber : 4; | |
UINT8 Authentication : 1; | |
UINT8 Encryption : 1; | |
UINT8 Tracking : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_SEND_MESSAGE_CHANNEL_NUMBER; | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_SEND_MESSAGE_CHANNEL_NUMBER ChannelNumber; | |
UINT8 MessageData[0]; | |
} IPMI_SEND_MESSAGE_REQUEST; | |
typedef struct { | |
UINT8 CompletionCode; | |
UINT8 ResponseData[0]; | |
} IPMI_SEND_MESSAGE_RESPONSE; | |
// | |
// Definitions for Read Event Message Buffer command | |
// | |
#define IPMI_APP_READ_EVENT_MSG_BUFFER 0x35 | |
// | |
// Constants and Structure definitions for "Read Event Message Buffer" command to follow here | |
// | |
// | |
// Definitions for Get BT Interface Capabilities command | |
// | |
#define IPMI_APP_GET_BT_INTERFACE_CAPABILITY 0x36 | |
// | |
// Constants and Structure definitions for "Get BT Interface Capabilities" command to follow here | |
// | |
// | |
// Definitions for Get System GUID command | |
// | |
#define IPMI_APP_GET_SYSTEM_GUID 0x37 | |
// | |
// Constants and Structure definitions for "Get System GUID" command to follow here | |
// | |
// | |
// Definitions for Get Channel Authentication Capabilities command | |
// | |
#define IPMI_APP_GET_CHANNEL_AUTHENTICATION_CAPABILITIES 0x38 | |
// | |
// Constants and Structure definitions for "Get Channel Authentication Capabilities" command to follow here | |
// | |
// | |
// Definitions for Get Session Challenge command | |
// | |
#define IPMI_APP_GET_SESSION_CHALLENGE 0x39 | |
// | |
// Constants and Structure definitions for "Get Session Challenge" command to follow here | |
// | |
// | |
// Definitions for Activate Session command | |
// | |
#define IPMI_APP_ACTIVATE_SESSION 0x3A | |
// | |
// Constants and Structure definitions for "Activate Session" command to follow here | |
// | |
// | |
// Definitions for Set Session Privelege Level command | |
// | |
#define IPMI_APP_SET_SESSION_PRIVELEGE_LEVEL 0x3B | |
// | |
// Constants and Structure definitions for "Set Session Privelege Level" command to follow here | |
// | |
// | |
// Definitions for Close Session command | |
// | |
#define IPMI_APP_CLOSE_SESSION 0x3C | |
// | |
// Constants and Structure definitions for "Close Session" command to follow here | |
// | |
// | |
// Definitions for Get Session Info command | |
// | |
#define IPMI_APP_GET_SESSION_INFO 0x3D | |
// | |
// Constants and Structure definitions for "Get Session Info" command to follow here | |
// | |
// | |
// Definitions for Get Auth Code command | |
// | |
#define IPMI_APP_GET_AUTHCODE 0x3F | |
// | |
// Constants and Structure definitions for "Get AuthCode" command to follow here | |
// | |
// | |
// Definitions for Set Channel Access command | |
// | |
#define IPMI_APP_SET_CHANNEL_ACCESS 0x40 | |
// | |
// Constants and Structure definitions for "Set Channel Access" command to follow here | |
// | |
// | |
// Definitions for Get Channel Access command | |
// | |
#define IPMI_APP_GET_CHANNEL_ACCESS 0x41 | |
// | |
// Constants and Structure definitions for "Get Channel Access" command to follow here | |
// | |
// | |
// Definitions for channel access memory type in Get Channel Access command request | |
// | |
#define IPMI_CHANNEL_ACCESS_MEMORY_TYPE_NON_VOLATILE 0x1 | |
#define IPMI_CHANNEL_ACCESS_MEMORY_TYPE_PRESENT_VOLATILE_SETTING 0x2 | |
// | |
// Definitions for channel access modes in Get Channel Access command response | |
// | |
#define IPMI_CHANNEL_ACCESS_MODES_DISABLED 0x0 | |
#define IPMI_CHANNEL_ACCESS_MODES_PRE_BOOT_ONLY 0x1 | |
#define IPMI_CHANNEL_ACCESS_MODES_ALWAYS_AVAILABLE 0x2 | |
#define IPMI_CHANNEL_ACCESS_MODES_SHARED 0x3 | |
typedef union { | |
struct { | |
UINT8 ChannelNo : 4; | |
UINT8 Reserved : 4; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_CHANNEL_ACCESS_CHANNEL_NUMBER; | |
typedef union { | |
struct { | |
UINT8 Reserved : 6; | |
UINT8 MemoryType : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_CHANNEL_ACCESS_TYPE; | |
typedef struct { | |
IPMI_GET_CHANNEL_ACCESS_CHANNEL_NUMBER ChannelNumber; | |
IPMI_GET_CHANNEL_ACCESS_TYPE AccessType; | |
} IPMI_GET_CHANNEL_ACCESS_REQUEST; | |
typedef union { | |
struct { | |
UINT8 AccessMode : 3; | |
UINT8 UserLevelAuthEnabled : 1; | |
UINT8 MessageAuthEnable : 1; | |
UINT8 Alert : 1; | |
UINT8 Reserved : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_CHANNEL_ACCESS_CHANNEL_ACCESS; | |
typedef union { | |
struct { | |
UINT8 ChannelPriviledgeLimit : 4; | |
UINT8 Reserved : 4; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_CHANNEL_ACCESS_PRIVILEGE_LIMIT; | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_GET_CHANNEL_ACCESS_CHANNEL_ACCESS ChannelAccess; | |
IPMI_GET_CHANNEL_ACCESS_PRIVILEGE_LIMIT PrivilegeLimit; | |
} IPMI_GET_CHANNEL_ACCESS_RESPONSE; | |
// | |
// Definitions for Get Channel Info command | |
// | |
#define IPMI_APP_GET_CHANNEL_INFO 0x42 | |
// | |
// Constants and Structure definitions for "Get Channel Info" command to follow here | |
// | |
// | |
// Definitions for channel media type | |
// | |
// IPMB (I2C) | |
#define IPMI_CHANNEL_MEDIA_TYPE_IPMB 0x1 | |
// ICMB v1.0 | |
#define IPMI_CHANNEL_MEDIA_TYPE_ICMB_1_0 0x2 | |
// ICMB v0.9 | |
#define IPMI_CHANNEL_MEDIA_TYPE_ICMB_0_9 0x3 | |
// 802.3 LAN | |
#define IPMI_CHANNEL_MEDIA_TYPE_802_3_LAN 0x4 | |
// Asynch. Serial/Modem (RS-232) | |
#define IPMI_CHANNEL_MEDIA_TYPE_RS_232 0x5 | |
// Other LAN | |
#define IPMI_CHANNEL_MEDIA_TYPE_OTHER_LAN 0x6 | |
// PCI SMBus | |
#define IPMI_CHANNEL_MEDIA_TYPE_PCI_SM_BUS 0x7 | |
// SMBus v1.0/1.1 | |
#define IPMI_CHANNEL_MEDIA_TYPE_SM_BUS_V1 0x8 | |
// SMBus v2.0 | |
#define IPMI_CHANNEL_MEDIA_TYPE_SM_BUS_V2 0x9 | |
// USB 1.x | |
#define IPMI_CHANNEL_MEDIA_TYPE_USB1 0xA | |
// USB 2.x | |
#define IPMI_CHANNEL_MEDIA_TYPE_USB2 0xB | |
// System Interface (KCS, SMIC, or BT) | |
#define IPMI_CHANNEL_MEDIA_TYPE_SYSTEM_INTERFACE 0xC | |
// OEM | |
#define IPMI_CHANNEL_MEDIA_TYPE_OEM_START 0x60 | |
#define IPMI_CHANNEL_MEDIA_TYPE_OEM_END 0x7F | |
typedef union { | |
struct { | |
UINT8 ChannelNo : 4; | |
UINT8 Reserved : 4; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_CHANNEL_INFO_CHANNEL_NUMBER; | |
typedef union { | |
struct { | |
UINT8 ChannelMediumType : 7; | |
UINT8 Reserved : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_CHANNEL_INFO_MEDIUM_TYPE; | |
typedef union { | |
struct { | |
UINT8 ChannelProtocolType : 5; | |
UINT8 Reserved : 3; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_CHANNEL_INFO_PROTOCOL_TYPE; | |
typedef union { | |
struct { | |
UINT8 ActiveSessionCount : 6; | |
UINT8 SessionSupport : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_CHANNEL_INFO_SESSION_SUPPORT; | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_CHANNEL_INFO_CHANNEL_NUMBER ChannelNumber; | |
IPMI_CHANNEL_INFO_MEDIUM_TYPE MediumType; | |
IPMI_CHANNEL_INFO_PROTOCOL_TYPE ProtocolType; | |
IPMI_CHANNEL_INFO_SESSION_SUPPORT SessionSupport; | |
UINT8 VendorId[3]; | |
UINT16 AuxChannelInfo; | |
} IPMI_GET_CHANNEL_INFO_RESPONSE; | |
// | |
// Definitions for Get Channel Info command | |
// | |
#define IPMI_APP_GET_CHANNEL_INFO 0x42 | |
// | |
// Constants and Structure definitions for "Get Channel Info" command to follow here | |
// | |
// | |
// Definitions for Set User Access command | |
// | |
#define IPMI_APP_SET_USER_ACCESS 0x43 | |
// | |
// Constants and Structure definitions for "Set User Access" command to follow here | |
// | |
// | |
// Definitions for Get User Access command | |
// | |
#define IPMI_APP_GET_USER_ACCESS 0x44 | |
// | |
// Constants and Structure definitions for "Get User Access" command to follow here | |
// | |
typedef union { | |
struct { | |
UINT8 ChannelNo : 4; | |
UINT8 Reserved : 4; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_USER_ACCESS_CHANNEL_NUMBER; | |
typedef union { | |
struct { | |
UINT8 UserId : 6; | |
UINT8 Reserved : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_USER_ID; | |
typedef struct { | |
IPMI_GET_USER_ACCESS_CHANNEL_NUMBER ChannelNumber; | |
IPMI_USER_ID UserId; | |
} IPMI_GET_USER_ACCESS_REQUEST; | |
typedef union { | |
struct { | |
UINT8 MaxUserId : 6; | |
UINT8 Reserved : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_USER_ACCESS_MAX_USER_ID; | |
typedef union { | |
struct { | |
UINT8 CurrentUserId : 6; | |
UINT8 UserIdEnableStatus : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_USER_ACCESS_CURRENT_USER; | |
typedef union { | |
struct { | |
UINT8 FixedUserId : 6; | |
UINT8 Reserved : 2; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_USER_ACCESS_FIXED_NAME_USER; | |
typedef union { | |
struct { | |
UINT8 UserPrivilegeLimit : 4; | |
UINT8 EnableIpmiMessaging : 1; | |
UINT8 EnableUserLinkAuthetication : 1; | |
UINT8 UserAccessAvailable : 1; | |
UINT8 Reserved : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_GET_USER_ACCESS_CHANNEL_ACCESS; | |
typedef struct { | |
UINT8 CompletionCode; | |
IPMI_GET_USER_ACCESS_MAX_USER_ID MaxUserId; | |
IPMI_GET_USER_ACCESS_CURRENT_USER CurrentUser; | |
IPMI_GET_USER_ACCESS_FIXED_NAME_USER FixedNameUser; | |
IPMI_GET_USER_ACCESS_CHANNEL_ACCESS ChannelAccess; | |
} IPMI_GET_USER_ACCESS_RESPONSE; | |
// | |
// Definitions for Set User Name command | |
// | |
#define IPMI_APP_SET_USER_NAME 0x45 | |
// | |
// Constants and Structure definitions for "Set User Name" command to follow here | |
// | |
typedef struct { | |
IPMI_USER_ID UserId; | |
UINT8 UserName[16]; | |
} IPMI_SET_USER_NAME_REQUEST; | |
// | |
// Definitions for Get User Name command | |
// | |
#define IPMI_APP_GET_USER_NAME 0x46 | |
// | |
// Constants and Structure definitions for "Get User Name" command to follow here | |
// | |
typedef struct { | |
IPMI_USER_ID UserId; | |
} IPMI_GET_USER_NAME_REQUEST; | |
typedef struct { | |
UINT8 CompletionCode; | |
UINT8 UserName[16]; | |
} IPMI_GET_USER_NAME_RESPONSE; | |
// | |
// Definitions for Set User Password command | |
// | |
#define IPMI_APP_SET_USER_PASSWORD 0x47 | |
// | |
// Constants and Structure definitions for "Set User Password" command to follow here | |
// | |
// | |
// Definitions for Set User password command operation type | |
// | |
#define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_DISABLE_USER 0x0 | |
#define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_ENABLE_USER 0x1 | |
#define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_SET_PASSWORD 0x2 | |
#define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_TEST_PASSWORD 0x3 | |
// | |
// Definitions for Set user password command password size | |
// | |
#define IPMI_SET_USER_PASSWORD_PASSWORD_SIZE_16 0x0 | |
#define IPMI_SET_USER_PASSWORD_PASSWORD_SIZE_20 0x1 | |
typedef union { | |
struct { | |
UINT8 UserId : 6; | |
UINT8 Reserved : 1; | |
UINT8 PasswordSize : 1; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_SET_USER_PASSWORD_USER_ID; | |
typedef union { | |
struct { | |
UINT8 Operation : 2; | |
UINT8 Reserved : 6; | |
} Bits; | |
UINT8 Uint8; | |
} IPMI_SET_USER_PASSWORD_OPERATION; | |
typedef struct { | |
IPMI_SET_USER_PASSWORD_USER_ID UserId; | |
IPMI_SET_USER_PASSWORD_OPERATION Operation; | |
UINT8 PasswordData[0]; // 16 or 20 bytes, depending on the 'PasswordSize' field | |
} IPMI_SET_USER_PASSWORD_REQUEST; | |
// | |
// Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24) | |
// | |
// | |
// Definitions for Activate Payload command | |
// | |
#define IPMI_APP_ACTIVATE_PAYLOAD 0x48 | |
// | |
// Constants and Structure definitions for "Activate Payload" command to follow here | |
// | |
// | |
// Definitions for De-Activate Payload command | |
// | |
#define IPMI_APP_DEACTIVATE_PAYLOAD 0x49 | |
// | |
// Constants and Structure definitions for "DeActivate Payload" command to follow here | |
// | |
// | |
// Definitions for Get Payload activation Status command | |
// | |
#define IPMI_APP_GET_PAYLOAD_ACTIVATION_STATUS 0x4a | |
// | |
// Constants and Structure definitions for "Get Payload activation Status" command to follow here | |
// | |
// | |
// Definitions for Get Payload Instance Info command | |
// | |
#define IPMI_APP_GET_PAYLOAD_INSTANCE_INFO 0x4b | |
// | |
// Constants and Structure definitions for "Get Payload Instance Info" command to follow here | |
// | |
// | |
// Definitions for Set User Payload Access command | |
// | |
#define IPMI_APP_SET_USER_PAYLOAD_ACCESS 0x4C | |
// | |
// Constants and Structure definitions for "Set User Payload Access" command to follow here | |
// | |
// | |
// Definitions for Get User Payload Access command | |
// | |
#define IPMI_APP_GET_USER_PAYLOAD_ACCESS 0x4D | |
// | |
// Constants and Structure definitions for "Get User Payload Access" command to follow here | |
// | |
// | |
// Definitions for Get Channel Payload Support command | |
// | |
#define IPMI_APP_GET_CHANNEL_PAYLOAD_SUPPORT 0x4E | |
// | |
// Constants and Structure definitions for "Get Channel Payload Support" command to follow here | |
// | |
// | |
// Definitions for Get Channel Payload Version command | |
// | |
#define IPMI_APP_GET_CHANNEL_PAYLOAD_VERSION 0x4F | |
// | |
// Constants and Structure definitions for "Get Channel Payload Version" command to follow here | |
// | |
// | |
// Definitions for Get Channel OEM Payload Info command | |
// | |
#define IPMI_APP_GET_CHANNEL_OEM_PAYLOAD_INFO 0x50 | |
// | |
// Constants and Structure definitions for "Get Channel OEM Payload Info" command to follow here | |
// | |
// | |
// Definitions for Master Write-Read command | |
// | |
#define IPMI_APP_MASTER_WRITE_READ 0x52 | |
// | |
// Constants and Structure definitions for "Master Write Read" command to follow here | |
// | |
// | |
// Definitions for Get Channel Cipher Suites command | |
// | |
#define IPMI_APP_GET_CHANNEL_CIPHER_SUITES 0x54 | |
// | |
// Constants and Structure definitions for "Get Channel Cipher Suites" command to follow here | |
// | |
// | |
// Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24, Section 3) | |
// | |
// | |
// Definitions for Suspend-Resume Payload Encryption command | |
// | |
#define IPMI_APP_SUSPEND_RESUME_PAYLOAD_ENCRYPTION 0x55 | |
// | |
// Constants and Structure definitions for "Suspend-Resume Payload Encryption" command to follow here | |
// | |
// | |
// Below is Definitions for IPMI Messaging Support Commands (Chapter 22, Section 25 and 9) | |
// | |
// | |
// Definitions for Set Channel Security Keys command | |
// | |
#define IPMI_APP_SET_CHANNEL_SECURITY_KEYS 0x56 | |
// | |
// Constants and Structure definitions for "Set Channel Security Keys" command to follow here | |
// | |
// | |
// Definitions for Get System Interface Capabilities command | |
// | |
#define IPMI_APP_GET_SYSTEM_INTERFACE_CAPABILITIES 0x57 | |
// | |
// Constants and Structure definitions for "Get System Interface Capabilities" command to follow here | |
// | |
// | |
// Definitions for Get System Interface Capabilities command SSIF transaction support | |
// | |
#define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_SINGLE_PARTITION_RW 0x0 | |
#define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_MULTI_PARTITION_RW 0x1 | |
#define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_MULTI_PARTITION_RW_WITH_MIDDLE 0x2 | |
#pragma pack() | |
#endif |