| ## @ PatchFv.py | |
| # | |
| # Copyright (c) 2014 - 2021, Intel Corporation. All rights reserved.<BR> | |
| # SPDX-License-Identifier: BSD-2-Clause-Patent | |
| # | |
| ## | |
| import os | |
| import re | |
| import sys | |
| # | |
| # Read data from file | |
| # | |
| # param [in] binfile Binary file | |
| # param [in] offset Offset | |
| # param [in] len Length | |
| # | |
| # retval value Value | |
| # | |
| def readDataFromFile (binfile, offset, len=1): | |
| fd = open(binfile, "r+b") | |
| fsize = os.path.getsize(binfile) | |
| offval = offset & 0xFFFFFFFF | |
| if (offval & 0x80000000): | |
| offval = fsize - (0xFFFFFFFF - offval + 1) | |
| fd.seek(offval) | |
| if sys.version_info[0] < 3: | |
| bytearray = [ord(b) for b in fd.read(len)] | |
| else: | |
| bytearray = [b for b in fd.read(len)] | |
| value = 0 | |
| idx = len - 1 | |
| while idx >= 0: | |
| value = value << 8 | bytearray[idx] | |
| idx = idx - 1 | |
| fd.close() | |
| return value | |
| # | |
| # Check FSP header is valid or not | |
| # | |
| # param [in] binfile Binary file | |
| # | |
| # retval boolean True: valid; False: invalid | |
| # | |
| def IsFspHeaderValid (binfile): | |
| fd = open (binfile, "rb") | |
| bindat = fd.read(0x200) # only read first 0x200 bytes | |
| fd.close() | |
| HeaderList = [b'FSPH' , b'FSPP' , b'FSPE'] # Check 'FSPH', 'FSPP', and 'FSPE' in the FSP header | |
| OffsetList = [] | |
| for each in HeaderList: | |
| if each in bindat: | |
| idx = bindat.index(each) | |
| else: | |
| idx = 0 | |
| OffsetList.append(idx) | |
| if not OffsetList[0] or not OffsetList[1]: # If 'FSPH' or 'FSPP' is missing, it will return false | |
| return False | |
| if sys.version_info[0] < 3: | |
| Revision = ord(bindat[OffsetList[0] + 0x0B]) | |
| else: | |
| Revision = bindat[OffsetList[0] + 0x0B] | |
| # | |
| # if revision is bigger than 1, it means it is FSP v1.1 or greater revision, which must contain 'FSPE'. | |
| # | |
| if Revision > 1 and not OffsetList[2]: | |
| return False # If FSP v1.1 or greater without 'FSPE', then return false | |
| return True | |
| # | |
| # Patch data in file | |
| # | |
| # param [in] binfile Binary file | |
| # param [in] offset Offset | |
| # param [in] value Patch value | |
| # param [in] len Length | |
| # | |
| # retval len Length | |
| # | |
| def patchDataInFile (binfile, offset, value, len=1): | |
| fd = open(binfile, "r+b") | |
| fsize = os.path.getsize(binfile) | |
| offval = offset & 0xFFFFFFFF | |
| if (offval & 0x80000000): | |
| offval = fsize - (0xFFFFFFFF - offval + 1) | |
| bytearray = [] | |
| idx = 0 | |
| while idx < len: | |
| bytearray.append(value & 0xFF) | |
| value = value >> 8 | |
| idx = idx + 1 | |
| fd.seek(offval) | |
| if sys.version_info[0] < 3: | |
| fd.write("".join(chr(b) for b in bytearray)) | |
| else: | |
| fd.write(bytes(bytearray)) | |
| fd.close() | |
| return len | |
| class Symbols: | |
| def __init__(self): | |
| self.dictSymbolAddress = {} | |
| self.dictGuidNameXref = {} | |
| self.dictFfsOffset = {} | |
| self.dictVariable = {} | |
| self.dictModBase = {} | |
| self.fdFile = None | |
| self.string = "" | |
| self.fdBase = 0xFFFFFFFF | |
| self.fdSize = 0 | |
| self.index = 0 | |
| self.fvList = [] | |
| self.parenthesisOpenSet = '([{<' | |
| self.parenthesisCloseSet = ')]}>' | |
| # | |
| # Get FD file | |
| # | |
| # retval self.fdFile Retrieve FD file | |
| # | |
| def getFdFile (self): | |
| return self.fdFile | |
| # | |
| # Get FD size | |
| # | |
| # retval self.fdSize Retrieve the size of FD file | |
| # | |
| def getFdSize (self): | |
| return self.fdSize | |
| def parseFvInfFile (self, infFile): | |
| fvInfo = {} | |
| fvFile = infFile[0:-4] + ".Fv" | |
| fvInfo['Name'] = os.path.splitext(os.path.basename(infFile))[0] | |
| fvInfo['Offset'] = self.getFvOffsetInFd(fvFile) | |
| fvInfo['Size'] = readDataFromFile (fvFile, 0x20, 4) | |
| fdIn = open(infFile, "r") | |
| rptLines = fdIn.readlines() | |
| fdIn.close() | |
| fvInfo['Base'] = 0 | |
| for rptLine in rptLines: | |
| match = re.match("^EFI_BASE_ADDRESS\s*=\s*(0x[a-fA-F0-9]+)", rptLine) | |
| if match: | |
| fvInfo['Base'] = int(match.group(1), 16) | |
| break | |
| self.fvList.append(dict(fvInfo)) | |
| return 0 | |
| # | |
| # Create dictionaries | |
| # | |
| # param [in] fvDir FV's directory | |
| # param [in] fvNames All FV's names | |
| # | |
| # retval 0 Created dictionaries successfully | |
| # | |
| def createDicts (self, fvDir, fvNames): | |
| # | |
| # If the fvDir is not a directory, then raise an exception | |
| # | |
| if not os.path.isdir(fvDir): | |
| raise Exception ("'%s' is not a valid directory!" % fvDir) | |
| # | |
| # If the Guid.xref is not existing in fvDir, then raise an exception | |
| # | |
| xrefFile = os.path.join(fvDir, "Guid.xref") | |
| if not os.path.exists(xrefFile): | |
| raise Exception("Cannot open GUID Xref file '%s'!" % xrefFile) | |
| # | |
| # Add GUID reference to dictionary | |
| # | |
| self.dictGuidNameXref = {} | |
| self.parseGuidXrefFile(xrefFile) | |
| # | |
| # Split up each FV from fvNames and get the fdBase | |
| # | |
| fvList = fvNames.split(":") | |
| fdBase = fvList.pop() | |
| if len(fvList) == 0: | |
| fvList.append(fdBase) | |
| # | |
| # If the FD file is not existing, then raise an exception | |
| # | |
| fdFile = os.path.join(fvDir, fdBase.strip() + ".fd") | |
| if not os.path.exists(fdFile): | |
| raise Exception("Cannot open FD file '%s'!" % fdFile) | |
| # | |
| # Get the size of the FD file | |
| # | |
| self.fdFile = fdFile | |
| self.fdSize = os.path.getsize(fdFile) | |
| # | |
| # If the INF file, which is the first element of fvList, is not existing, then raise an exception | |
| # | |
| infFile = os.path.join(fvDir, fvList[0].strip()) + ".inf" | |
| if not os.path.exists(infFile): | |
| raise Exception("Cannot open INF file '%s'!" % infFile) | |
| # | |
| # Parse INF file in order to get fdBase and then assign those values to dictVariable | |
| # | |
| self.parseInfFile(infFile) | |
| self.dictVariable = {} | |
| self.dictVariable["FDSIZE"] = self.fdSize | |
| self.dictVariable["FDBASE"] = self.fdBase | |
| # | |
| # Collect information from FV MAP file and FV TXT file then | |
| # put them into dictionaries | |
| # | |
| self.fvList = [] | |
| self.dictSymbolAddress = {} | |
| self.dictFfsOffset = {} | |
| for file in fvList: | |
| # | |
| # If the .Fv.map file is not existing, then raise an exception. | |
| # Otherwise, parse FV MAP file | |
| # | |
| fvFile = os.path.join(fvDir, file.strip()) + ".Fv" | |
| mapFile = fvFile + ".map" | |
| if not os.path.exists(mapFile): | |
| raise Exception("Cannot open MAP file '%s'!" % mapFile) | |
| infFile = fvFile[0:-3] + ".inf" | |
| self.parseFvInfFile(infFile) | |
| self.parseFvMapFile(mapFile) | |
| # | |
| # If the .Fv.txt file is not existing, then raise an exception. | |
| # Otherwise, parse FV TXT file | |
| # | |
| fvTxtFile = fvFile + ".txt" | |
| if not os.path.exists(fvTxtFile): | |
| raise Exception("Cannot open FV TXT file '%s'!" % fvTxtFile) | |
| self.parseFvTxtFile(fvTxtFile) | |
| for fv in self.fvList: | |
| self.dictVariable['_BASE_%s_' % fv['Name']] = fv['Base'] | |
| # | |
| # Search all MAP files in FFS directory if it exists then parse MOD MAP file | |
| # | |
| ffsDir = os.path.join(fvDir, "Ffs") | |
| if (os.path.isdir(ffsDir)): | |
| for item in os.listdir(ffsDir): | |
| if len(item) <= 0x24: | |
| continue | |
| mapFile =os.path.join(ffsDir, item, "%s.map" % item[0:0x24]) | |
| if not os.path.exists(mapFile): | |
| continue | |
| self.parseModMapFile(item[0x24:], mapFile) | |
| return 0 | |
| # | |
| # Get FV offset in FD file | |
| # | |
| # param [in] fvFile FV file | |
| # | |
| # retval offset Got FV offset successfully | |
| # | |
| def getFvOffsetInFd(self, fvFile): | |
| # | |
| # Check if the first 0x70 bytes of fvFile can be found in fdFile | |
| # | |
| fvHandle = open(fvFile, "r+b") | |
| fdHandle = open(self.fdFile, "r+b") | |
| offset = fdHandle.read().find(fvHandle.read(0x70)) | |
| fvHandle.close() | |
| fdHandle.close() | |
| if offset == -1: | |
| raise Exception("Could not locate FV file %s in FD!" % fvFile) | |
| return offset | |
| # | |
| # Parse INF file | |
| # | |
| # param [in] infFile INF file | |
| # | |
| # retval 0 Parsed INF file successfully | |
| # | |
| def parseInfFile(self, infFile): | |
| # | |
| # Get FV offset and search EFI_BASE_ADDRESS in the FD file | |
| # then assign the value of EFI_BASE_ADDRESS to fdBase | |
| # | |
| fvOffset = self.getFvOffsetInFd(infFile[0:-4] + ".Fv") | |
| fdIn = open(infFile, "r") | |
| rptLine = fdIn.readline() | |
| self.fdBase = 0xFFFFFFFF | |
| while (rptLine != "" ): | |
| #EFI_BASE_ADDRESS = 0xFFFDF400 | |
| match = re.match("^EFI_BASE_ADDRESS\s*=\s*(0x[a-fA-F0-9]+)", rptLine) | |
| if match is not None: | |
| self.fdBase = int(match.group(1), 16) - fvOffset | |
| break | |
| rptLine = fdIn.readline() | |
| fdIn.close() | |
| if self.fdBase == 0xFFFFFFFF: | |
| raise Exception("Could not find EFI_BASE_ADDRESS in INF file!" % infFile) | |
| return 0 | |
| # | |
| # Parse FV TXT file | |
| # | |
| # param [in] fvTxtFile .Fv.txt file | |
| # | |
| # retval 0 Parsed FV TXT file successfully | |
| # | |
| def parseFvTxtFile(self, fvTxtFile): | |
| fvName = os.path.basename(fvTxtFile)[0:-7].upper() | |
| # | |
| # Get information from .Fv.txt in order to create a dictionary | |
| # For example, | |
| # self.dictFfsOffset[912740BE-2284-4734-B971-84B027353F0C] = 0x000D4078 | |
| # | |
| fvOffset = self.getFvOffsetInFd(fvTxtFile[0:-4]) | |
| fdIn = open(fvTxtFile, "r") | |
| rptLine = fdIn.readline() | |
| while (rptLine != "" ): | |
| match = re.match("(0x[a-fA-F0-9]+)\s([0-9a-fA-F\-]+)", rptLine) | |
| if match is not None: | |
| if match.group(2) in self.dictFfsOffset: | |
| self.dictFfsOffset[fvName + ':' + match.group(2)] = "0x%08X" % (int(match.group(1), 16) + fvOffset) | |
| else: | |
| self.dictFfsOffset[match.group(2)] = "0x%08X" % (int(match.group(1), 16) + fvOffset) | |
| rptLine = fdIn.readline() | |
| fdIn.close() | |
| return 0 | |
| # | |
| # Parse FV MAP file | |
| # | |
| # param [in] mapFile .Fv.map file | |
| # | |
| # retval 0 Parsed FV MAP file successfully | |
| # | |
| def parseFvMapFile(self, mapFile): | |
| # | |
| # Get information from .Fv.map in order to create dictionaries | |
| # For example, | |
| # self.dictModBase[FspSecCore:BASE] = 4294592776 (0xfffa4908) | |
| # self.dictModBase[FspSecCore:ENTRY] = 4294606552 (0xfffa7ed8) | |
| # self.dictModBase[FspSecCore:TEXT] = 4294593080 (0xfffa4a38) | |
| # self.dictModBase[FspSecCore:DATA] = 4294612280 (0xfffa9538) | |
| # self.dictSymbolAddress[FspSecCore:_SecStartup] = 0x00fffa4a38 | |
| # | |
| fdIn = open(mapFile, "r") | |
| rptLine = fdIn.readline() | |
| modName = "" | |
| foundModHdr = False | |
| while (rptLine != "" ): | |
| if rptLine[0] != ' ': | |
| #DxeIpl (Fixed Flash Address, BaseAddress=0x00fffb4310, EntryPoint=0x00fffb4958,Type=PE) | |
| match = re.match("([_a-zA-Z0-9\-]+)\s\(.+BaseAddress=(0x[0-9a-fA-F]+),\s+EntryPoint=(0x[0-9a-fA-F]+),\s*Type=\w+\)", rptLine) | |
| if match is None: | |
| #DxeIpl (Fixed Flash Address, BaseAddress=0x00fffb4310, EntryPoint=0x00fffb4958) | |
| match = re.match("([_a-zA-Z0-9\-]+)\s\(.+BaseAddress=(0x[0-9a-fA-F]+),\s+EntryPoint=(0x[0-9a-fA-F]+)\)", rptLine) | |
| if match is not None: | |
| foundModHdr = True | |
| modName = match.group(1) | |
| if len(modName) == 36: | |
| modName = self.dictGuidNameXref[modName.upper()] | |
| self.dictModBase['%s:BASE' % modName] = int (match.group(2), 16) | |
| self.dictModBase['%s:ENTRY' % modName] = int (match.group(3), 16) | |
| #(GUID=86D70125-BAA3-4296-A62F-602BEBBB9081 .textbaseaddress=0x00fffb4398 .databaseaddress=0x00fffb4178) | |
| match = re.match("\(GUID=([A-Z0-9\-]+)\s+\.textbaseaddress=(0x[0-9a-fA-F]+)\s+\.databaseaddress=(0x[0-9a-fA-F]+)\)", rptLine) | |
| if match is not None: | |
| if foundModHdr: | |
| foundModHdr = False | |
| else: | |
| modName = match.group(1) | |
| if len(modName) == 36: | |
| modName = self.dictGuidNameXref[modName.upper()] | |
| self.dictModBase['%s:TEXT' % modName] = int (match.group(2), 16) | |
| self.dictModBase['%s:DATA' % modName] = int (match.group(3), 16) | |
| else: | |
| # 0x00fff8016c __ModuleEntryPoint | |
| foundModHdr = False | |
| match = re.match("^\s+(0x[a-z0-9]+)\s+([_a-zA-Z0-9]+)", rptLine) | |
| if match is not None: | |
| self.dictSymbolAddress["%s:%s"%(modName, match.group(2))] = match.group(1) | |
| rptLine = fdIn.readline() | |
| fdIn.close() | |
| return 0 | |
| # | |
| # Parse MOD MAP file | |
| # | |
| # param [in] moduleName Module name | |
| # param [in] mapFile .Fv.map file | |
| # | |
| # retval 0 Parsed MOD MAP file successfully | |
| # retval 1 There is no moduleEntryPoint in modSymbols | |
| # retval 2 There is no offset for moduleEntryPoint in modSymbols | |
| # | |
| def parseModMapFile(self, moduleName, mapFile): | |
| # | |
| # Get information from mapFile by moduleName in order to create a dictionary | |
| # For example, | |
| # self.dictSymbolAddress[FspSecCore:___guard_fids_count] = 0x00fffa4778 | |
| # | |
| modSymbols = {} | |
| fdIn = open(mapFile, "r") | |
| reportLines = fdIn.readlines() | |
| fdIn.close() | |
| moduleEntryPoint = "__ModuleEntryPoint" | |
| reportLine = reportLines[0] | |
| if reportLine.strip().find("Archive member included") != -1: | |
| #GCC | |
| # 0x0000000000001d55 IoRead8 | |
| patchMapFileMatchString = "\s+(0x[0-9a-fA-F]{16})\s+([^\s][^0x][_a-zA-Z0-9\-]+)\s" | |
| matchKeyGroupIndex = 2 | |
| matchSymbolGroupIndex = 1 | |
| prefix = '_' | |
| else: | |
| #MSFT | |
| #0003:00000190 _gComBase 00007a50 SerialPo | |
| patchMapFileMatchString = "^\s[0-9a-fA-F]{4}:[0-9a-fA-F]{8}\s+(\w+)\s+([0-9a-fA-F]{8,16}\s+)" | |
| matchKeyGroupIndex = 1 | |
| matchSymbolGroupIndex = 2 | |
| prefix = '' | |
| for reportLine in reportLines: | |
| match = re.match(patchMapFileMatchString, reportLine) | |
| if match is not None: | |
| modSymbols[prefix + match.group(matchKeyGroupIndex)] = match.group(matchSymbolGroupIndex) | |
| # Handle extra module patchable PCD variable in Linux map since it might have different format | |
| # .data._gPcd_BinaryPatch_PcdVpdBaseAddress | |
| # 0x0000000000003714 0x4 /tmp/ccmytayk.ltrans1.ltrans.o | |
| handleNext = False | |
| if matchSymbolGroupIndex == 1: | |
| for reportLine in reportLines: | |
| if handleNext: | |
| handleNext = False | |
| pcdName = match.group(1) | |
| match = re.match("\s+(0x[0-9a-fA-F]{16})\s+", reportLine) | |
| if match is not None: | |
| modSymbols[prefix + pcdName] = match.group(1) | |
| else: | |
| match = re.match("^\s\.data\.(_gPcd_BinaryPatch[_a-zA-Z0-9\-]+)", reportLine) | |
| if match is not None: | |
| handleNext = True | |
| continue | |
| if not moduleEntryPoint in modSymbols: | |
| if matchSymbolGroupIndex == 2: | |
| if not '_ModuleEntryPoint' in modSymbols: | |
| return 1 | |
| else: | |
| moduleEntryPoint = "_ModuleEntryPoint" | |
| else: | |
| return 1 | |
| modEntry = '%s:%s' % (moduleName,moduleEntryPoint) | |
| if not modEntry in self.dictSymbolAddress: | |
| modKey = '%s:ENTRY' % moduleName | |
| if modKey in self.dictModBase: | |
| baseOffset = self.dictModBase['%s:ENTRY' % moduleName] - int(modSymbols[moduleEntryPoint], 16) | |
| else: | |
| return 2 | |
| else: | |
| baseOffset = int(self.dictSymbolAddress[modEntry], 16) - int(modSymbols[moduleEntryPoint], 16) | |
| for symbol in modSymbols: | |
| fullSym = "%s:%s" % (moduleName, symbol) | |
| if not fullSym in self.dictSymbolAddress: | |
| self.dictSymbolAddress[fullSym] = "0x00%08x" % (baseOffset+ int(modSymbols[symbol], 16)) | |
| return 0 | |
| # | |
| # Parse Guid.xref file | |
| # | |
| # param [in] xrefFile the full directory of Guid.xref file | |
| # | |
| # retval 0 Parsed Guid.xref file successfully | |
| # | |
| def parseGuidXrefFile(self, xrefFile): | |
| # | |
| # Get information from Guid.xref in order to create a GuidNameXref dictionary | |
| # The dictGuidNameXref, for example, will be like | |
| # dictGuidNameXref [1BA0062E-C779-4582-8566-336AE8F78F09] = FspSecCore | |
| # | |
| fdIn = open(xrefFile, "r") | |
| rptLine = fdIn.readline() | |
| while (rptLine != "" ): | |
| match = re.match("([0-9a-fA-F\-]+)\s([_a-zA-Z0-9]+)", rptLine) | |
| if match is not None: | |
| self.dictGuidNameXref[match.group(1).upper()] = match.group(2) | |
| rptLine = fdIn.readline() | |
| fdIn.close() | |
| return 0 | |
| # | |
| # Get current character | |
| # | |
| # retval self.string[self.index] | |
| # retval '' Exception | |
| # | |
| def getCurr(self): | |
| try: | |
| return self.string[self.index] | |
| except Exception: | |
| return '' | |
| # | |
| # Check to see if it is last index | |
| # | |
| # retval self.index | |
| # | |
| def isLast(self): | |
| return self.index == len(self.string) | |
| # | |
| # Move to next index | |
| # | |
| def moveNext(self): | |
| self.index += 1 | |
| # | |
| # Skip space | |
| # | |
| def skipSpace(self): | |
| while not self.isLast(): | |
| if self.getCurr() in ' \t': | |
| self.moveNext() | |
| else: | |
| return | |
| # | |
| # Parse value | |
| # | |
| # retval value | |
| # | |
| def parseValue(self): | |
| self.skipSpace() | |
| var = '' | |
| while not self.isLast(): | |
| char = self.getCurr() | |
| if char.lower() in '_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789:-': | |
| var += char | |
| self.moveNext() | |
| else: | |
| break | |
| if ':' in var: | |
| partList = var.split(':') | |
| lenList = len(partList) | |
| if lenList != 2 and lenList != 3: | |
| raise Exception("Unrecognized expression %s" % var) | |
| modName = partList[lenList-2] | |
| modOff = partList[lenList-1] | |
| if ('-' not in modName) and (modOff[0] in '0123456789'): | |
| # MOD: OFFSET | |
| var = self.getModGuid(modName) + ":" + modOff | |
| if '-' in var: # GUID:OFFSET | |
| value = self.getGuidOff(var) | |
| else: | |
| value = self.getSymbols(var) | |
| self.synUsed = True | |
| else: | |
| if var[0] in '0123456789': | |
| value = self.getNumber(var) | |
| else: | |
| value = self.getVariable(var) | |
| return int(value) | |
| # | |
| # Parse single operation | |
| # | |
| # retval ~self.parseBrace() or self.parseValue() | |
| # | |
| def parseSingleOp(self): | |
| self.skipSpace() | |
| char = self.getCurr() | |
| if char == '~': | |
| self.moveNext() | |
| return ~self.parseBrace() | |
| else: | |
| return self.parseValue() | |
| # | |
| # Parse symbol of Brace([, {, <) | |
| # | |
| # retval value or self.parseSingleOp() | |
| # | |
| def parseBrace(self): | |
| self.skipSpace() | |
| char = self.getCurr() | |
| parenthesisType = self.parenthesisOpenSet.find(char) | |
| if parenthesisType >= 0: | |
| self.moveNext() | |
| value = self.parseExpr() | |
| self.skipSpace() | |
| if self.getCurr() != self.parenthesisCloseSet[parenthesisType]: | |
| raise Exception("No closing brace") | |
| self.moveNext() | |
| if parenthesisType == 1: # [ : Get content | |
| value = self.getContent(value) | |
| elif parenthesisType == 2: # { : To address | |
| value = self.toAddress(value) | |
| elif parenthesisType == 3: # < : To offset | |
| value = self.toOffset(value) | |
| return value | |
| else: | |
| return self.parseSingleOp() | |
| # | |
| # Parse symbol of Multiplier(*) | |
| # | |
| # retval value or self.parseSingleOp() | |
| # | |
| def parseMul(self): | |
| values = [self.parseBrace()] | |
| while True: | |
| self.skipSpace() | |
| char = self.getCurr() | |
| if char == '*': | |
| self.moveNext() | |
| values.append(self.parseBrace()) | |
| else: | |
| break | |
| value = 1 | |
| for each in values: | |
| value *= each | |
| return value | |
| # | |
| # Parse symbol of And(&) and Or(|) | |
| # | |
| # retval value | |
| # | |
| def parseAndOr(self): | |
| value = self.parseMul() | |
| op = None | |
| while True: | |
| self.skipSpace() | |
| char = self.getCurr() | |
| if char == '&': | |
| self.moveNext() | |
| value &= self.parseMul() | |
| elif char == '|': | |
| div_index = self.index | |
| self.moveNext() | |
| value |= self.parseMul() | |
| else: | |
| break | |
| return value | |
| # | |
| # Parse symbol of Add(+) and Minus(-) | |
| # | |
| # retval sum(values) | |
| # | |
| def parseAddMinus(self): | |
| values = [self.parseAndOr()] | |
| while True: | |
| self.skipSpace() | |
| char = self.getCurr() | |
| if char == '+': | |
| self.moveNext() | |
| values.append(self.parseAndOr()) | |
| elif char == '-': | |
| self.moveNext() | |
| values.append(-1 * self.parseAndOr()) | |
| else: | |
| break | |
| return sum(values) | |
| # | |
| # Parse expression | |
| # | |
| # retval self.parseAddMinus() | |
| # | |
| def parseExpr(self): | |
| return self.parseAddMinus() | |
| # | |
| # Get result | |
| # | |
| # retval value | |
| # | |
| def getResult(self): | |
| value = self.parseExpr() | |
| self.skipSpace() | |
| if not self.isLast(): | |
| raise Exception("Unexpected character found '%s'" % self.getCurr()) | |
| return value | |
| # | |
| # Get module GUID | |
| # | |
| # retval value | |
| # | |
| def getModGuid(self, var): | |
| guid = (guid for guid,name in self.dictGuidNameXref.items() if name==var) | |
| try: | |
| value = guid.next() | |
| except Exception: | |
| raise Exception("Unknown module name %s !" % var) | |
| return value | |
| # | |
| # Get variable | |
| # | |
| # retval value | |
| # | |
| def getVariable(self, var): | |
| value = self.dictVariable.get(var, None) | |
| if value == None: | |
| raise Exception("Unrecognized variable '%s'" % var) | |
| return value | |
| # | |
| # Get number | |
| # | |
| # retval value | |
| # | |
| def getNumber(self, var): | |
| var = var.strip() | |
| if var.startswith('0x'): # HEX | |
| value = int(var, 16) | |
| else: | |
| value = int(var, 10) | |
| return value | |
| # | |
| # Get content | |
| # | |
| # param [in] value | |
| # | |
| # retval value | |
| # | |
| def getContent(self, value): | |
| return readDataFromFile (self.fdFile, self.toOffset(value), 4) | |
| # | |
| # Change value to address | |
| # | |
| # param [in] value | |
| # | |
| # retval value | |
| # | |
| def toAddress(self, value): | |
| if value < self.fdSize: | |
| value = value + self.fdBase | |
| return value | |
| # | |
| # Change value to offset | |
| # | |
| # param [in] value | |
| # | |
| # retval value | |
| # | |
| def toOffset(self, value): | |
| offset = None | |
| for fvInfo in self.fvList: | |
| if (value >= fvInfo['Base']) and (value < fvInfo['Base'] + fvInfo['Size']): | |
| offset = value - fvInfo['Base'] + fvInfo['Offset'] | |
| if not offset: | |
| if (value >= self.fdBase) and (value < self.fdBase + self.fdSize): | |
| offset = value - self.fdBase | |
| else: | |
| offset = value | |
| if offset >= self.fdSize: | |
| raise Exception("Invalid file offset 0x%08x !" % value) | |
| return offset | |
| # | |
| # Get GUID offset | |
| # | |
| # param [in] value | |
| # | |
| # retval value | |
| # | |
| def getGuidOff(self, value): | |
| # GUID:Offset | |
| symbolName = value.split(':') | |
| if len(symbolName) == 3: | |
| fvName = symbolName[0].upper() | |
| keyName = '%s:%s' % (fvName, symbolName[1]) | |
| offStr = symbolName[2] | |
| elif len(symbolName) == 2: | |
| keyName = symbolName[0] | |
| offStr = symbolName[1] | |
| if keyName in self.dictFfsOffset: | |
| value = (int(self.dictFfsOffset[keyName], 16) + int(offStr, 16)) & 0xFFFFFFFF | |
| else: | |
| raise Exception("Unknown GUID %s !" % value) | |
| return value | |
| # | |
| # Get symbols | |
| # | |
| # param [in] value | |
| # | |
| # retval ret | |
| # | |
| def getSymbols(self, value): | |
| if value in self.dictSymbolAddress: | |
| # Module:Function | |
| ret = int (self.dictSymbolAddress[value], 16) | |
| else: | |
| raise Exception("Unknown symbol %s !" % value) | |
| return ret | |
| # | |
| # Evaluate symbols | |
| # | |
| # param [in] expression | |
| # param [in] isOffset | |
| # | |
| # retval value & 0xFFFFFFFF | |
| # | |
| def evaluate(self, expression, isOffset): | |
| self.index = 0 | |
| self.synUsed = False | |
| self.string = expression | |
| value = self.getResult() | |
| if isOffset: | |
| if self.synUsed: | |
| # Consider it as an address first | |
| value = self.toOffset(value) | |
| if value & 0x80000000: | |
| # Consider it as a negative offset next | |
| offset = (~value & 0xFFFFFFFF) + 1 | |
| if offset < self.fdSize: | |
| value = self.fdSize - offset | |
| if value >= self.fdSize: | |
| raise Exception("Invalid offset expression !") | |
| return value & 0xFFFFFFFF | |
| # | |
| # Print out the usage | |
| # | |
| def Usage(): | |
| print ("PatchFv Version 0.50") | |
| print ("Usage: \n\tPatchFv FvBuildDir [FvFileBaseNames:]FdFileBaseNameToPatch \"Offset, Value\"") | |
| def main(): | |
| # | |
| # Parse the options and args | |
| # | |
| symTables = Symbols() | |
| # | |
| # If the arguments are less than 4, then return an error. | |
| # | |
| if len(sys.argv) < 4: | |
| Usage() | |
| return 1 | |
| # | |
| # If it fails to create dictionaries, then return an error. | |
| # | |
| if symTables.createDicts(sys.argv[1], sys.argv[2]) != 0: | |
| print ("ERROR: Failed to create symbol dictionary!!") | |
| return 2 | |
| # | |
| # Get FD file and size | |
| # | |
| fdFile = symTables.getFdFile() | |
| fdSize = symTables.getFdSize() | |
| try: | |
| # | |
| # Check to see if FSP header is valid | |
| # | |
| ret = IsFspHeaderValid(fdFile) | |
| if ret == False: | |
| raise Exception ("The FSP header is not valid. Stop patching FD.") | |
| comment = "" | |
| for fvFile in sys.argv[3:]: | |
| # | |
| # Check to see if it has enough arguments | |
| # | |
| items = fvFile.split(",") | |
| if len (items) < 2: | |
| raise Exception("Expect more arguments for '%s'!" % fvFile) | |
| comment = "" | |
| command = "" | |
| params = [] | |
| for item in items: | |
| item = item.strip() | |
| if item.startswith("@"): | |
| comment = item[1:] | |
| elif item.startswith("$"): | |
| command = item[1:] | |
| else: | |
| if len(params) == 0: | |
| isOffset = True | |
| else : | |
| isOffset = False | |
| # | |
| # Parse symbols then append it to params | |
| # | |
| params.append (symTables.evaluate(item, isOffset)) | |
| # | |
| # Patch a new value into FD file if it is not a command | |
| # | |
| if command == "": | |
| # Patch a DWORD | |
| if len (params) == 2: | |
| offset = params[0] | |
| value = params[1] | |
| oldvalue = readDataFromFile(fdFile, offset, 4) | |
| ret = patchDataInFile (fdFile, offset, value, 4) - 4 | |
| else: | |
| raise Exception ("Patch command needs 2 parameters !") | |
| if ret: | |
| raise Exception ("Patch failed for offset 0x%08X" % offset) | |
| else: | |
| print ("Patched offset 0x%08X:[%08X] with value 0x%08X # %s" % (offset, oldvalue, value, comment)) | |
| elif command == "COPY": | |
| # | |
| # Copy binary block from source to destination | |
| # | |
| if len (params) == 3: | |
| src = symTables.toOffset(params[0]) | |
| dest = symTables.toOffset(params[1]) | |
| clen = symTables.toOffset(params[2]) | |
| if (dest + clen <= fdSize) and (src + clen <= fdSize): | |
| oldvalue = readDataFromFile(fdFile, src, clen) | |
| ret = patchDataInFile (fdFile, dest, oldvalue, clen) - clen | |
| else: | |
| raise Exception ("Copy command OFFSET or LENGTH parameter is invalid !") | |
| else: | |
| raise Exception ("Copy command needs 3 parameters !") | |
| if ret: | |
| raise Exception ("Copy failed from offset 0x%08X to offset 0x%08X!" % (src, dest)) | |
| else : | |
| print ("Copied %d bytes from offset 0x%08X ~ offset 0x%08X # %s" % (clen, src, dest, comment)) | |
| else: | |
| raise Exception ("Unknown command %s!" % command) | |
| return 0 | |
| except Exception as ex: | |
| print ("ERROR: %s" % ex) | |
| return 1 | |
| if __name__ == '__main__': | |
| sys.exit(main()) |