| // *++ | |
| // | |
| // (C) Copyright 2014-2015 Hewlett-Packard Development Company, L.P.<BR> | |
| // Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR> | |
| // (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR> | |
| // SPDX-License-Identifier: BSD-2-Clause-Patent | |
| // | |
| // | |
| // Module Name: | |
| // | |
| // DpStrings.uni | |
| // | |
| // Abstract: | |
| // | |
| // String definitions for the Shell dp command | |
| // | |
| // Revision History: | |
| // | |
| // --*/ | |
| /=# | |
| #langdef en-US "English" | |
| #string STR_DP_UP #language en-US "UP" | |
| #string STR_DP_DOWN #language en-US "DOWN" | |
| #string STR_DP_DASHES #language en-US "-------------------------------------------------------------------------------\n" | |
| #string STR_DP_SECTION_HEADER #language en-US "\n==[ %s ]========\n" | |
| #string STR_DP_INVALID_ARG #language en-US "Invalid argument(s)\n" | |
| #string STR_DP_TOO_MANY #language en-US "Too many arguments\n" | |
| #string STR_DP_TOO_FEW #language en-US "Too few arguments\n" | |
| #string STR_DP_INVALID_NUM_ARG #language en-US "Invalid argument(s), the value of %H%s%N must be numbers\n" | |
| #string STR_DP_INVALID_RANGE #language en-US "Invalid argument(s), the value of %H%s%N must be between %H%d%N and %H%d%N\n" | |
| #string STR_DP_CONFLICT_ARG #language en-US "Invalid argument(s), %H%s%N can not be used together with %H%s%N\n" | |
| #string STR_DP_NO_RAW_ALL #language en-US "Invalid argument(s), -n flag must use with -A or -R\n" | |
| #string STR_DP_HANDLES_ERROR #language en-US "Locate all handles error - %r\n" | |
| #string STR_DP_ERROR_NAME #language en-US "Unknown driver name" | |
| #string STR_PERF_PROPERTY_NOT_FOUND #language en-US "Performance property not found\n" | |
| #string STR_DP_BUILD_REVISION #language en-US "\nDP Build Version: %d.%d\n" | |
| #string STR_DP_KHZ #language en-US "System Performance Timer Frequency: %,8d (KHz)\n" | |
| #string STR_DP_TIMER_PROPERTIES #language en-US "System Performance Timer counts %s from 0x%Lx to 0x%Lx\n" | |
| #string STR_DP_VERBOSE_THRESHOLD #language en-US "Measurements less than %,Ld microseconds are not displayed.\n" | |
| #string STR_DP_SECTION_PHASES #language en-US "Major Phases" | |
| #string STR_DP_RESET_END #language en-US " Reset End: %L8d (us)\n" | |
| #string STR_DP_SEC_PHASE #language en-US " SEC Phase Duration: %L8d (us)\n" | |
| #string STR_DP_PHASE_BDSTO #language en-US " BDS Timeout: %L8d (ms) included in BDS Duration\n" | |
| #string STR_DP_PHASE_DURATION #language en-US "%5a Phase Duration: %L8d (ms)\n" | |
| #string STR_DP_TOTAL_DURATION #language en-US "Total Duration: %L8d (ms)\n" | |
| #string STR_DP_SECTION_DRIVERS #language en-US "Drivers by Handle" | |
| #string STR_DP_HANDLE_SECTION #language en-US "Index: Handle Driver Name Description Time(us)\n" | |
| #string STR_DP_HANDLE_VARS #language en-US "%5d: [%3x] %36s %11s %L8d\n" | |
| #string STR_DP_HANDLE_SECTION2 #language en-US "Index: Handle Driver Name Description Time(us) ID\n" | |
| #string STR_DP_HANDLE_VARS2 #language en-US "%5d: [%3x] %36s %11s %L8d %5d\n" | |
| #string STR_DP_SECTION_PEIMS #language en-US "PEIMs" | |
| #string STR_DP_PEIM_SECTION #language en-US "Index: Instance GUID Token Time(us)\n" | |
| #string STR_DP_PEIM_VARS #language en-US "%5d: %g PEIM %L8d\n" | |
| #string STR_DP_PEIM_SECTION2 #language en-US "Index: Instance GUID Token Time(us) ID\n" | |
| #string STR_DP_PEIM_VARS2 #language en-US "%5d: %g PEIM %L8d %5d\n" | |
| #string STR_DP_SECTION_GENERAL #language en-US "General" | |
| #string STR_DP_GLOBAL_SECTION #language en-US "Index Name Description Time(us)\n" | |
| #string STR_DP_GLOBAL_VARS #language en-US "%5d:%25s %31s %L8d\n" | |
| #string STR_DP_GLOBAL_SECTION2 #language en-US "Index Name Description Time(us) ID\n" | |
| #string STR_DP_GLOBAL_VARS2 #language en-US "%5d:%25s %31s %L8d %5d\n" | |
| #string STR_DP_SECTION_CUMULATIVE #language en-US "Cumulative" | |
| #string STR_DP_CUMULATIVE_SECT_1 #language en-US "(Times in microsec.) Cumulative Average Shortest Longest\n" | |
| #string STR_DP_CUMULATIVE_SECT_2 #language en-US " Name Count Duration Duration Duration Duration\n" | |
| #string STR_DP_CUMULATIVE_STATS #language en-US "%11a %8d %L10d %L10d %L10d %L10d\n" | |
| #string STR_DP_SECTION_STATISTICS #language en-US "Statistics" | |
| #string STR_DP_STATS_NUMTRACE #language en-US "There were %d measurements taken, of which:\n" | |
| #string STR_DP_STATS_NUMINCOMPLETE #language en-US "%,8d are incomplete.\n" | |
| #string STR_DP_STATS_NUMPHASES #language en-US "%,8d are major execution phases.\n" | |
| #string STR_DP_STATS_NUMHANDLES #language en-US "%,8d have non-NULL handles, %d are NULL.\n" | |
| #string STR_DP_STATS_NUMPEIMS #language en-US "%,8d are PEIMs.\n" | |
| #string STR_DP_STATS_NUMGLOBALS #language en-US "%,8d are general measurements.\n" | |
| #string STR_DP_STATS_NUMPROFILE #language en-US "%,8d are profiling records.\n" | |
| #string STR_DP_SECTION_ALL #language en-US "Sequential Trace Records" | |
| #string STR_DP_ALL_HEADR #language en-US "\nIndex Handle Module Token Time(us)\n" | |
| #string STR_DP_ALL_VARS #language en-US "%5d:%3s0x%08p %36s %13s %L8d\n" | |
| #string STR_DP_ALL_DASHES2 #language en-US "-------------------------------------------------------------------------------------\n" | |
| #string STR_DP_ALL_HEADR2 #language en-US "\nIndex Handle Module Token Time(us) ID\n" | |
| #string STR_DP_ALL_VARS2 #language en-US "%5d:%3s0x%08p %36s %13s %L8d %5d\n" | |
| #string STR_DP_SECTION_RAWTRACE #language en-US "RAW Trace" | |
| #string STR_DP_RAW_DASHES #language en-US "---------------------------------------------------------------------------------------------------------------------------\n" | |
| #string STR_DP_RAW_VARS #language en-US "%5d: %16LX %16LX %16LX %31a %31a\n" | |
| #string STR_DP_RAW_HEADR #language en-US "\nIndex Handle Start Count End Count Token Module\n" | |
| #string STR_DP_RAW_DASHES2 #language en-US "---------------------------------------------------------------------------------------------------------------------------------\n" | |
| #string STR_DP_RAW_VARS2 #language en-US "%5d: %16LX %16LX %16LX %31a %31a %5d\n" | |
| #string STR_DP_RAW_HEADR2 #language en-US "\nIndex Handle Start Count End Count Token Module ID\n" | |
| #string STR_DP_INCOMPLETE #language en-US " I " | |
| #string STR_DP_COMPLETE #language en-US " " | |
| #string STR_ALIT_UNKNOWN #language en-US "Unknown" | |
| #string STR_DP_GET_ACPI_FPDT_FAIL #language en-US "Fail to get Firmware Performance Data Table (FPDT) in ACPI Table\n" | |
| #string STR_GET_HELP_DP #language en-US "" | |
| ".TH dp 0 "Display performance metrics"\r\n" | |
| ".SH NAME\r\n" | |
| "Displays performance metrics that are stored in memory.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| "DP [-b] [-v] [-x] [-s | -A | -R] [-t value] [-n count] [-c [token]][-i] [-?]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays on multiple pages\r\n" | |
| " -v - Displays additional information\r\n" | |
| " -x - Prevents display of individual measurements for cumulative items\r\n" | |
| " -s - Displays summary information only\r\n" | |
| " -A - Displays all measurements in a list\r\n" | |
| " -R - Displays all measurements in raw format\r\n" | |
| " -t VALUE - Sets display threshold to VALUE microseconds\r\n" | |
| " -n COUNT - Limits display to COUNT lines in All and Raw modes\r\n" | |
| " -i - Displays identifier\r\n" | |
| " -c TOKEN - Display pre-defined and custom cumulative data\r\n" | |
| " Pre-defined cumulative token are:\r\n" | |
| " 1. LoadImage:\r\n" | |
| " 2. StartImage:\r\n" | |
| " 3. DB:Start:\r\n" | |
| " 4. DB:Support:\r\n" | |
| " -? - Displays DP help information\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. Displays Performance metrics that are stored in memory.\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The action was completed as requested.\r\n" | |
| " SHELL_NOT_FOUND The requested option was not found.\r\n" | |
| " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly formatted or its value was out of bounds.\r\n" | |
| " SHELL_UNSUPPORTED The action as requested was unsupported.\r\n" | |
| " SHELL_OUT_OF_RESOURCES There was insufficient free space for the request to be completed.\r\n" |